f505e6fb4a
Assorted spelling fixes.
2015-03-19 21:54:14 +09:00
462346ac83
d3d9/tests: Extend the colorfill test.
2015-03-18 21:03:38 +09:00
c5fdc1670b
d3d9/tests: Relax the fog range test a bit.
2015-03-13 22:28:29 +09:00
d25cc9695b
d3d9: Correct ColorFill validation.
2015-03-13 21:57:33 +09:00
cdb7e825ce
d3d9/tests: Add a test for signed formats.
2015-03-10 21:43:28 +09:00
3730c99c28
d3d9/tests: Remove no-op binary & with all 1's (PVS-Studio).
2015-03-06 20:32:05 +09:00
148d6e3c10
d3d9/tests: Actually test some return values (PVS-Studio).
2015-03-04 21:50:41 +09:00
28a9d6324a
d3d9/tests: Extend the FPU setup test.
...
Games created by GameMaker modify the FPU control word to enable
division by zero exceptions. The game Risk of Rain, which is written
with GameMaker, furthermore sets fogstart == fogend, which triggers an
exception when the GL driver attempts to calculate 1 / (fogend -
fogstart). This test adds some evidence that we are not supposed to
temporarily restore the FPU CW if D3DCREATE_FPU_PRESERVE is used.
2015-02-27 21:53:33 +09:00
d423e06223
d3d9/tests: Move a Present out of the loops in fog_with_shader_test().
2015-02-20 22:53:23 +09:00
acbb387753
d3d9/tests: Test upload of user memory textures.
2015-02-20 22:53:19 +09:00
2aed2c3a15
d3d9/tests: Allow more alternative results in the ATI1N test.
2015-02-19 17:51:20 +09:00
f75d1b0c2f
d3d/tests: Geforce8+ GPUs abs() table fog.
2015-02-13 22:37:07 +09:00
fd218b93d0
d3d9/tests: Test rhw depth clip with z enabled but no depth buffer set.
2015-02-12 22:19:48 +09:00
3b2c642163
d3d9/tests: Test rhw table fog z vs rhw.
...
The Z disable part of the test is technically not necessary because the
fog coordinate is written before applying the projection matrix. I've
nevertheless included it because this is not immediately obvious and fog
is the only place where the vertex Z matters if depth test and depth
clipping are disabled.
2015-02-12 22:19:02 +09:00
30f4d91906
d3d9/tests: Add a test for POSITIONi shader input/outputs.
2015-02-09 22:05:53 +09:00
63d52c7317
d3d/tests: Show that WM_SYSCOMMAND(SC_RESTORE) is delivered only once.
2015-01-28 11:06:56 +01:00
3ef1d6bcd9
wined3d: Pass WM_SYSCOMMAND(SC_RESTORE) to DefWindowProc.
2015-01-28 11:06:48 +01:00
b83825509e
d3d9/tests: Fix test_3dc_formats getPixelColor check.
...
getPixelColor should be called before Present, because the device
swapchain was created with discard mode.
2015-01-08 14:03:15 +01:00
fc84368f87
d3d9/tests: Fix volume_dxt5_test getPixelColor check.
...
getPixelColor should be called before Present, because the device
swapchain was created with discard mode.
2015-01-08 14:03:06 +01:00
6f89df2fb4
d3d9/tests: Remove a couple duplicate lines.
2015-01-06 12:34:07 +01:00
ea534c9ab4
wined3d: Allow initial texture contents to be specified with wined3d_texture_create().
2015-01-05 20:15:35 +01:00
51406b471a
d3d9: Don't assert for shaders with the wrong vtbl.
2014-12-16 11:39:40 +01:00
3b3b74510b
d3d9: Calculate texture levels in d3d9 instead of wined3d.
2014-12-10 19:32:15 +01:00
19c860499a
wined3d: Filter messages generated by focus handling.
2014-12-08 14:18:43 +01:00
f217636e2d
d3d9/test: Test WM_SYSCOMMAND handling.
2014-12-08 14:17:22 +01:00
0c55b9d2b3
d3d9/tests: Test focus loss message filtering in d3d9ex.
2014-12-08 14:17:13 +01:00
36553d862b
d3d9/tests: Test focus loss message filtering.
2014-12-08 14:17:09 +01:00
aa9bc4c509
d3d9: Refuse to reset a lost device.
2014-12-02 13:05:48 +01:00
871fc4a38f
d3d/tests: Rename fog_interpolation_test for consistency.
2014-11-27 13:27:24 +01:00
96519f9be9
d3d/tests: Table fog does not abs the fog coordinate.
2014-11-27 13:27:21 +01:00
cfd741c6b6
d3d/tests: Show that the vfog abs is not a property of D3DFOG_LINEAR.
2014-11-27 13:27:17 +01:00
c9b10beb36
wined3d: Vertex fog uses the absolute eye position z.
2014-11-27 13:27:13 +01:00
099bc21df7
d3d9/tests: Don't require a WM_MOVE message.
2014-11-26 20:40:49 +01:00
abf44708a4
d3d9/tests: Fix test_cursor().
2014-11-25 19:49:42 +01:00
8b6a7a9c02
d3d9: Only one fullscreen swapchain is allowed.
2014-11-25 19:49:30 +01:00
f4d520d6e2
wined3d: Don't minimize hidden windows.
2014-11-20 22:31:26 +09:00
09a91231a6
wined3d: Set the device window size on focus window activation.
2014-11-20 22:31:13 +09:00
f6dde70624
wined3d: Restore the display mode on focus change.
2014-11-19 17:56:44 +09:00
1851e2618b
d3d9/tests: Test mode restoration on focus loss.
2014-11-19 16:41:03 +09:00
ef60604d44
d3d9/tests: Test style changes on focus loss.
2014-11-18 14:14:37 +09:00
9bcd9722f1
d3d9/tests: Test messages on focus loss.
2014-11-18 14:14:32 +09:00
1c116c3527
d3d10core/tests: Port alpha_test() to d3d10core.
2014-11-17 19:30:40 +09:00
32450ee61d
d3d9/tests: Allow passing a resolution to reset_device in d3d9ex.
2014-11-12 20:07:56 +09:00
38548df04b
d3d/tests: Test fog interpolation.
2014-11-12 20:07:56 +09:00
6ad7d50958
d3d9/tests: Allow passing a resolution to reset_device.
2014-11-11 21:57:27 +09:00
5e369853f1
d3d9/tests: Fix some wndproc comparison error messages.
2014-11-11 21:57:19 +09:00
7fb22f502e
d3d9/tests: The device restores the mode settings from the registry.
2014-11-07 14:04:00 +09:00
40c2fc215d
d3d9/tests: Check if the current display settings match the registry settings.
2014-11-04 21:16:13 +09:00
d690aaeeb6
d3d9/tests: Add an ATI1N entry to the test_volume_blocks test.
2014-11-04 21:15:59 +09:00
da54670a94
d3d9/tests: Add a test for ATI1N and ATI2N texture formats.
2014-11-04 21:15:58 +09:00
875a7c5426
wined3d: Use the input signature to setup SM4 pixel shader input semantics.
2014-11-04 16:54:35 +09:00
6334bf09b7
d3d9/tests: Skip unsupported resources in test_resource_type.
2014-10-23 18:48:20 +09:00
8633f7f123
d3d9/tests: Use create_device for test_swvp_buffer.
2014-10-22 21:01:39 +09:00
d5b2e8af39
d3d9/tests: Use create_device in test_fpu_setup (v2).
2014-10-22 21:01:35 +09:00
ee0733863e
d3d9/tests: Add style and size tests for D3DCREATE_NOWINDOWCHANGES.
2014-10-21 18:47:42 +09:00
80cbd276e0
d3d9/tests: Port test_window_style to d3d9ex.
2014-10-17 15:50:11 +09:00
5c33ffaf67
d3d9/tests: Port wndproc tests to d3d9ex.
2014-10-17 15:50:04 +09:00
894298d502
d3d9/tests: Port the unsupported shaders test to D3D9Ex.
2014-10-16 21:23:07 +09:00
a426d335a4
d3d9/tests: Allow a width and height to be passed to create_device() in the d3d9ex tests.
2014-10-15 21:29:29 +09:00
d897db7605
d3d9/tests: Add some tests for shaders using more than the maximum number of supported constants.
2014-10-14 14:00:50 +09:00
1bec6ab0bc
d3d9/tests: Use create_device() in test_scissor_size().
2014-10-09 17:36:22 +02:00
2291c72caf
d3d9/tests: Allow a width and height to be passed to create_device().
2014-10-09 17:36:22 +02:00
537febf2e8
d3d9/tests: Don't load user32 functions at runtime.
2014-10-07 20:22:08 +02:00
97856bcfee
wined3d: Replace wined3d_surface_update_desc() with wined3d_texture_update_desc().
2014-09-29 10:37:35 +02:00
a3daed9604
d3d10core: Implement d3d10_device_GetPredication().
2014-09-19 10:49:24 +02:00
74ab8e8ce9
wined3d: Do not increment the reference count of the returned buffer in wined3d_device_get_stream_source().
...
None of the other getters increment the reference count either.
2014-09-18 13:06:32 +02:00
736b9e1c1c
wined3d: Get rid of wined3d_device_color_fill().
2014-08-22 12:53:26 +02:00
07985a8c38
wined3d: Use rendertarget views for depth/stencil buffers instead of surfaces.
...
I don't think the difference between d3d10 depth/stencil and rendertarget
views is large enough to justify a separate type. Unfortunately that does make
the name "wined3d_rendertarget_view" slightly awkward.
2014-08-22 12:53:11 +02:00
b005ad6f90
wined3d: Use rendertarget views for color output instead of surfaces.
2014-08-21 12:24:42 +02:00
888b278096
d3d9: wined3d_device_get_available_texture_mem() returns a UINT.
2014-08-18 12:47:10 +02:00
d1d48d3194
d3d9: The "forwardReference" field in struct d3d9_surface is always a texture, if set.
2014-08-18 12:47:01 +02:00
c5e8115ee2
d3d9: Volumes are always part of a texture.
2014-08-15 17:04:10 +02:00
ff694bf47d
d3d9: Return E_OUTOFMEMORY on HeapAlloc() failure in device_parent_surface_created().
2014-08-15 17:04:03 +02:00
341db6d8d3
wined3d: Remove wined3d_texture_set/get_priority.
2014-07-16 16:10:05 +02:00
cf11933701
wined3d: Remove wined3d_buffer_set/get_priority.
2014-07-16 16:10:01 +02:00
30437f9fe4
d3d9/tests: Get rid of struct vertex_floatcolor.
2014-07-16 11:56:01 +02:00
0cae65d494
d3d9/tests: Get rid of struct vertex_shortcolor.
2014-07-16 11:55:59 +02:00
1ccf7f5e74
d3d9/tests: Get rid of struct nvertex.
2014-07-16 11:55:57 +02:00
86ba5b604e
d3d9/tests: Get rid of struct tvertex.
2014-07-16 11:55:55 +02:00
51f5bc903a
d3d9/tests: Get rid of struct vertex.
2014-07-16 11:55:52 +02:00
9329e996b4
d3d9/tests: Fix some ok() call style issues.
2014-07-09 14:43:56 +02:00
509c49bdb5
d3d9/tests: Add a test for SetPriority and GetPriority.
2014-07-09 14:43:40 +02:00
eb0daf08c6
d3d9: Ignore SetPriority and GetPriority calls on surfaces.
2014-07-09 14:43:30 +02:00
ae25b1eca5
d3d9: Improve d3d9_device_CheckDeviceState() a little.
2014-06-30 22:04:53 +02:00
d50350886a
d3d9: Check the device status in present calls.
2014-06-27 10:37:39 +02:00
09fda3b805
d3d9: Improve d3d9_device_TestCooperativeLevel().
2014-06-27 10:37:36 +02:00
04acac207a
d3d9/tests: Add some lost device tests.
2014-06-27 10:37:23 +02:00
b42fe709d6
wined3d: Validate and handle query size parameter.
2014-06-16 13:56:35 +02:00
7162820845
d3d9/tests: Test GetData behavior with various size values.
2014-06-16 13:56:33 +02:00
acf890e2b2
d3d9/tests: Add a test for D3DUSAGE_WRITEONLY.
...
This test seeks to demonstrate that readbacks of WRITEONLY resources
still work, even after a resource has been used for rendering.
2014-06-11 16:14:45 +02:00
64082aebc5
d3d9: Remove unnecessary DllMain implementation.
2014-05-15 19:04:50 +02:00
301a17d556
d3d9/tests: Merge vertexdeclaration.c into device.c.
2014-05-02 14:08:42 +02:00
23eed88fde
wined3d: Implement support for per-stage texture stage constants.
...
This patch is loosely based on an earlier patch by Christian Costa.
2014-04-23 15:00:43 +02:00
a1784d9ed9
wined3d: Add support for timestamp queries.
2014-04-17 13:53:00 +02:00
cdedb06af7
d3d9/tests: Add a test for timestamp queries.
2014-04-17 13:52:49 +02:00
b97570fe1c
d3d9/tests: Properly declare matrices.
2014-04-14 20:19:01 +02:00
3ae4889eeb
d3d9/tests: Get rid of some pointless BeginScene() checks.
2014-04-14 20:19:00 +02:00
74a2bd084f
d3d9/tests: Make the sanity test a normal test.
2014-04-11 10:42:06 +02:00
9f6765f759
d3d9/tests: Use a separate device for depth_clamp_test().
2014-04-11 10:42:04 +02:00
7273d52bcd
d3d9/tests: Use a separate device for stretchrect_test().
2014-04-11 10:42:01 +02:00
a8f3708322
d3d9/tests: Use a separate device for lighting_test().
2014-04-11 10:41:59 +02:00
32919f40d0
d3d9/tests: Use a separate device for clear_test().
2014-04-11 10:41:55 +02:00
9595526932
d3d9/tests: Use a separate device for color_fill_test().
2014-04-10 13:53:46 +02:00
b7f323e8c6
d3d9/tests: Use a separate device for fog_test().
2014-04-10 13:53:44 +02:00
0453e4e44a
d3d9/tests: Use a separate device for test_cube_wrap().
2014-04-10 13:53:41 +02:00
8a170e9d48
d3d9/tests: Use a separate device for z_range_test().
2014-04-10 13:53:39 +02:00
f329a2b586
d3d9/tests: Use a separate device for maxmip_test().
2014-04-10 13:53:37 +02:00
80c3e07c96
d3d9/tests: Use a separate device for offscreen_test().
2014-04-09 09:23:03 +02:00
0513d79526
d3d9/tests: Use a separate device for ds_size_test().
2014-04-09 09:23:01 +02:00
e41a6c827f
d3d9/tests: Use a separate device for alpha_test().
2014-04-09 09:22:59 +02:00
b7977c9f6b
d3d9/tests: Use a separate device for shademode_test().
2014-04-09 09:22:57 +02:00
91e9ca7070
d3d9/tests: Use a separate device for srgbtexture_test().
2014-04-09 09:22:54 +02:00
9177261a22
d3d9/tests: Test locking of mipmap textures.
2014-04-08 19:23:20 +02:00
813ae272b0
d3d9/tests: Use a separate device for release_buffer_test().
2014-04-08 09:47:08 +02:00
1abd58edea
d3d9/tests: Use a separate device for float_texture_test().
2014-04-08 09:47:07 +02:00
63c679e651
d3d9/tests: Use a separate device for g16r16_texture_test().
2014-04-08 09:47:06 +02:00
9d756e0905
d3d9/tests: Use a separate device for pixelshader_blending_test().
2014-04-08 09:47:05 +02:00
230b910a34
d3d9/tests: Use a separate device for texture_transform_flags_test().
2014-04-08 09:47:05 +02:00
af51c679bf
d3d9/tests: Add a test for (sub-) resource types.
2014-04-07 19:06:11 +02:00
f4f066ca28
d3d9/tests: Use a separate device for autogen_mipmap_test().
2014-04-07 15:34:42 +02:00
93a37ed548
d3d9/tests: Use a separate device for fixed_function_decl_test().
2014-04-07 15:34:42 +02:00
e5589b74a7
d3d9/tests: Use a separate device for conditional_np2_repeat_test().
2014-04-07 15:34:41 +02:00
3d78a77f74
d3d9/tests: Use a separate device for fixed_function_bumpmap_test().
2014-04-07 15:34:40 +02:00
f3a898a87d
d3d9/tests: Use a separate device for pointsize_test().
2014-04-07 15:34:39 +02:00
7980b8d833
d3d9/tests: Use a separate device for tssargtemp_test().
2014-04-04 10:46:24 +02:00
12743d5709
d3d9/tests: Use a separate device for np2_stretch_rect_test().
2014-04-04 10:46:22 +02:00
2e0e4f91ff
d3d9/tests: Use a separate device for yuv_color_test().
2014-04-04 10:46:20 +02:00
09be75d2b8
d3d9/tests: Use a separate device for yuv_layout_test().
2014-04-04 10:46:19 +02:00
e13a785723
d3d9/tests: Use a separate device for zwriteenable_test().
2014-04-04 10:46:16 +02:00
dbb7386208
d3d9/tests: Use a separate device for alphatest_test().
2014-04-03 13:22:34 +02:00
15a2817d8d
d3d9/tests: Use a separate device for viewport_test().
2014-04-03 13:22:32 +02:00
9d9f580b8c
d3d9/tests: Use a separate device for test_constant_clamp_vs().
2014-04-03 13:22:31 +02:00
1e772e5d89
d3d9/tests: Use a separate device for test_compare_instructions().
2014-04-03 13:22:28 +02:00
9c705180b6
d3d9/tests: Use a separate device for test_mova().
2014-04-03 13:22:23 +02:00
f350774c77
d3d9/tests: Use a separate device for loop_index_test().
2014-04-02 10:58:12 +02:00
47786eb64a
d3d9/tests: Use a separate device for sincos_test().
2014-04-02 10:58:10 +02:00
94e337df19
d3d9/tests: Use a separate device for sgn_test().
2014-04-02 10:58:08 +02:00
f237f86397
d3d9/tests: Use a separate device for clip_planes_test().
2014-04-02 10:58:06 +02:00
779b8b53e8
d3d9/tests: Use a separate device for test_vshader_input().
2014-04-02 10:58:02 +02:00
ef292a1a96
d3d9/tests: Handle the Windows 8 testbot results in test_vshader_input().
2014-04-01 13:30:58 +02:00
7641980a9e
d3d9/tests: Use an easier to debug texture in generate_bumpmap_textures().
...
This makes it much easier to determine what went wrong if an implementation
samples from the wrong location.
2014-04-01 13:30:57 +02:00
7f9c0d45e7
d3d9/tests: Handle the Windows 8 testbot results in cnd_test().
2014-04-01 13:30:56 +02:00
f11f913ab0
d3d9/tests: Handle the Windows 8 testbot results in fp_special_test().
2014-04-01 13:30:55 +02:00
f174ca74c8
d3d9/tests: Handle the Windows 8 testbot results in zenable_test().
2014-04-01 13:30:54 +02:00
ebd5f96aea
wined3d: Remove resource private data methods.
2014-03-24 20:20:18 +01:00
50de4cda8f
d3d9: Use the private store api for surfaces.
2014-03-24 20:20:17 +01:00
6121393d0a
d3d9: Use the private store api for textures.
2014-03-24 20:20:17 +01:00
f2b5bf26b7
d3d9: Use the private store api for buffers.
2014-03-24 20:20:16 +01:00
96a74e0cf7
d3d9: Introduce a resource structure.
2014-03-24 20:20:15 +01:00
ad306ce41a
d3d9/tests: Use a separate device for test_vshader_float16().
2014-03-24 11:49:40 +01:00
63609b3418
d3d9/tests: Use a separate device for stream_test().
2014-03-24 11:49:37 +01:00
0be10d6050
d3d9/tests: Use a separate device for fog_with_shader_test().
2014-03-24 11:49:35 +01:00
aded2bb23c
d3d9/tests: Use a separate device for texbem_test().
2014-03-24 11:49:33 +01:00
65c9b48de6
d3d9/tests: Use a separate device for texdepth_test().
2014-03-24 11:49:31 +01:00
b175891182
d3d9/tests: Use a separate device for texkill_test().
2014-03-21 13:59:22 +01:00
3cc2d639bb
d3d9/tests: Use a separate device for x8l8v8u8_test().
2014-03-21 13:59:22 +01:00
d1d40bfa55
d3d9/tests: Use a separate device for volume_v16u16_test().
2014-03-21 13:59:21 +01:00
4a2e38953e
d3d9/tests: Use a separate device for constant_clamp_ps_test().
2014-03-21 13:59:20 +01:00
7f302ac4c4
d3d9/tests: Use a separate device for cnd_test().
2014-03-21 13:59:19 +01:00
938529e1f9
wined3d: Remove the version parameter.
2014-03-20 19:04:37 +01:00
cd93070bfd
d3d9/tests: Use a separate device for dp2add_ps_test().
2014-03-20 10:44:03 +01:00
c0fdad52c2
d3d9/tests: Use a separate device for unbound_sampler_test().
2014-03-20 10:44:01 +01:00
07c42c9eda
d3d9/tests: Use a separate device for nested_loop_test().
2014-03-20 10:43:58 +01:00
f1d4d8c49d
d3d9/tests: Use a separate device for pretransformed_varying_test().
2014-03-20 10:43:56 +01:00
c11904b86d
d3d9/tests: Use a separate device for vface_register_test().
2014-03-20 10:43:54 +01:00
3ec514382f
d3d9/tests: Use a separate device for vpos_register_test().
2014-03-19 11:33:21 +01:00
7df9eb08fb
d3d9/tests: Use a separate device for multiple_rendertargets_test().
2014-03-19 11:33:20 +01:00
ad45d2c233
d3d9/tests: Use a separate device for texop_test().
2014-03-19 11:33:19 +01:00
91d3dcffd7
d3d9/tests: Use a separate device for texop_range_test().
2014-03-19 11:33:19 +01:00
33b32c9dd5
d3d9/tests: Use a separate device for alphareplicate_test().
2014-03-19 11:33:18 +01:00
ad81149953
d3d9/tests: Use a separate device for dp3_alpha_test().
2014-03-18 11:42:35 +01:00
34e9d94d81
d3d9/tests: Use a separate device for depth_buffer_test().
2014-03-18 11:42:33 +01:00
38e2f4ca05
d3d9/tests: Use a separate device for depth_buffer2_test().
2014-03-18 11:42:31 +01:00
421f925d5e
d3d9/tests: Use a separate device for depth_blit_test().
2014-03-18 11:42:24 +01:00
424e069edc
d3d9/tests: Use a separate device for intz_test().
2014-03-18 11:42:21 +01:00
7071bf199f
d3d9/tests: Use a separate device for shadow_test().
2014-03-17 17:34:11 +01:00
b1fbee3340
d3d9/tests: Use a separate device for fp_special_test().
2014-03-17 17:34:11 +01:00
f281ca2214
d3d9/tests: Use a separate device for depth_bounds_test().
2014-03-17 17:34:11 +01:00
e93ff4063f
d3d9/tests: Use a separate device for srgbwrite_format_test().
2014-03-17 17:34:11 +01:00
cfbb16ad49
d3d9/tests: Use a separate device for update_surface_test().
2014-03-17 17:34:11 +01:00
0ee5fae929
d3d9/tests: Use a separate device for multisample_get_rtdata_test().
2014-03-14 16:14:24 +01:00
af63977750
d3d9/tests: Use a separate device for zenable_test().
2014-03-14 16:14:23 +01:00
55e669265d
d3d9/tests: Use a separate device for fog_special_test().
2014-03-14 16:14:23 +01:00
f9c46fb77a
d3d9/tests: Use a separate device for volume_srgb_test().
2014-03-14 16:14:22 +01:00
c868f2d3a7
d3d9/tests: Use a separate device for volume_dxt5_test().
2014-03-14 16:14:21 +01:00
b02129aa90
d3d9/tests: Give add_dirty_rect_test() its own device.
...
We want to avoid tests accidentally depending on state set by previous
tests. For example, add_dirty_rect_test() had a dependency on D3DRS_CULLMODE
being D3DCULL_NONE, set by lighting_test().
2014-03-13 20:22:05 +01:00
cac52b4b10
d3d9/tests: Don't share the D3D object either in visual.c tests that have their own device.
2014-03-13 20:22:04 +01:00
6f1b494a90
d3d9/tests: Move some stateblock tests to device.c.
2014-03-13 20:22:02 +01:00
2a95fa6831
d3d9/tests: Test GetPrivateData size behavior.
2014-03-12 19:01:15 +01:00
6ffbfc7c29
d3d9/tests: Use a custom GUID for the private data tests.
2014-03-12 19:01:13 +01:00
379c6564db
d3d9/tests: Show that a failing SetPrivateData call does not clear the old contents.
2014-03-11 19:39:31 +01:00
ad86da8cd0
d3d9/tests: Handle failure to create a device in the stateblock tests with skip().
2014-03-07 11:33:49 +01:00
84faf3d8c2
d3d9/tests: Use create_device() in more tests.
2014-03-07 11:33:30 +01:00
b50235ab35
d3d9/tests: Don't bother handling Direct3DCreate9() failures, we verified it works earlier.
2014-03-06 12:01:29 +01:00
7f675174c8
d3d9: Make ResetEx and PresentEx hookable.
2014-03-03 17:46:52 +01:00
1168948764
d3d9/tests: Get rid of "skip_once" in yuv_layout_test().
2014-03-03 17:02:19 +01:00
e08c6947c2
d3d9/tests: Fix some test failures on Windows 2000.
2014-02-25 14:20:15 -06:00
995be892fa
d3d9/tests: Test that Direct3D9 doesn't modify the pixel format of the window it targets. (try 4, resend).
2014-02-22 08:41:59 -06:00
8b2938a23e
d3d9/tests: Add tests for different YUV texture layouts.
2014-02-17 20:16:31 +01:00
442446cdc8
d3d9/tests: Add a test for sub resource private data.
2014-02-17 20:16:27 +01:00
6745982aaa
d3d9/tests: Skip YUV tests if the formats cannot be converted.
...
The Windows 8 testbot supports some YUV formats as plain surfaces, but cannot
convert them to RGB in StretchRect.
2014-02-17 20:16:26 +01:00
35223d80cb
d3d9/tests: Clean up yuv_color_test.
2014-02-17 20:16:25 +01:00
a6f00eb2b9
d3d9/tests: Ignore broken CheckDeviceType() behavior on 64-bit Windows 8.
2014-02-13 19:01:03 +01:00
a1b963490a
d3d9/tests: Direct3DCreate9() is always available if we have d3d9.
2014-01-29 20:26:14 +01:00
71d018b25b
d3d9/tests: Cleanup test_display_formats() a bit.
2014-01-29 20:25:57 +01:00
175c63773d
wined3d: Don't allow format conversion on Present() for d3d8.
...
Note that this isn't currently enforced by wined3d_swapchain_create() or
wined3d_device_reset() though.
2014-01-29 20:25:52 +01:00
6f498c4946
d3d9/tests: Improve testing of display formats and IDirect3D9_CheckDeviceType().
...
Tests every combination of display format and backbuffer format from
(D3DFMT_R5G6B5, D3DFMT_X1R5G5B5, D3DFMT_A1R5G5B5, D3DFMT_X8R8G8B8,
D3DFMT_A8R8G8B8, D3DFMT_A2R10G10B10, D3DFMT_UNKNOWN).
Tests the behavior of CheckDeviceType() with display formats for which there
are no adapter modes, rather than skipping those.
Tests windowed mode.
2014-01-28 19:38:48 +01:00
35d8c56333
d3d9: Make CheckDeviceType() fail for display formats other than D3DFMT_X8R8G8B8 and D3DFMT_R5G6B5 in full-screen.
...
The adapter mode functions already enforce this, and tests show
CheckDeviceType() should fail for full-screen mode with display formats for
which there are no adapter modes.
2014-01-28 19:38:46 +01:00
e7f0a8a081
Assorted spelling and typos fixes.
2014-01-27 17:00:11 +01:00
91f2435469
Assorted spelling fixes.
2014-01-09 17:39:59 +01:00
b91973daa7
wined3d: Merge wined3d_surface_set_mem into wined3d_surface_update_desc .
2014-01-08 20:02:22 +01:00
86ffd6c4ea
d3d9/tests: Make sure create_device() returns NULL on failure.
2014-01-08 14:34:13 +01:00
99ef0d6ff0
makefiles: Get rid of the MAKE_TEST_RULES variable.
2014-01-02 12:13:16 +01:00
5e7416e5c8
makefiles: Get rid of the MAKE_DLL_RULES variable.
2014-01-02 12:08:18 +01:00
03fe6f3e07
d3d9/tests: Test user memory and getdc interaction.
2013-12-12 19:21:36 +01:00
58f16ddd4e
d3d9: shared_handle must be NULL in non-ex d3d9.
2013-12-10 17:32:22 +01:00
62df35c312
d3d9: Implement user memory for offscreen plain surfaces.
2013-12-10 17:32:15 +01:00
96c7a4d6ca
d3d9: Buffers do not support user memory.
2013-12-10 17:32:09 +01:00
d9bd9a9a87
d3d9: Volume and cube textures do not support user memory.
2013-12-10 17:32:03 +01:00
b7b0b7d2e1
d3d9/tests: Test user memory with D3DPOOL_SCRATCH.
2013-12-10 17:31:56 +01:00
15c1a26b55
wined3d: Create volumes inside wined3d.
2013-12-06 13:14:52 +01:00
799c2fb866
d3d9/tests: Extend the sysmem texture mipmap test.
2013-12-04 21:19:03 +01:00
5ba7f79bad
Assorted spelling fixes.
2013-12-03 19:41:53 +01:00
4b3db52b53
wined3d: Merge the texture creation functions.
2013-11-27 11:30:15 +01:00
c96092f831
d3d9/tests: Read the result before swapping in volume_v16u16_test.
2013-11-25 17:42:54 +01:00
cc138ba296
d3d9/tests: Add a test for AddDirtyRect.
2013-11-21 19:39:02 +01:00
afc3d2ab70
wined3d: Create surfaces inside wined3d.
2013-11-15 12:00:26 +01:00
b436087217
d3d9/tests: Fix a test failure on Windows XP with the default VGA driver.
2013-11-05 20:38:20 +01:00
ceb4d2595b
d3d9/tests: Get rid of the "data2" vertex data array in pretransformed_varying_test().
2013-11-04 11:05:51 +01:00
88971aa17d
d3d9/tests: Get rid of some unused test data in pretransformed_varying_test().
2013-11-01 10:53:14 +01:00
532f17bce0
d3d9/tests: Fix the expected value for the "blendindices" test in pretransformed_varying_test().
...
0x00333333 makes much more sense than 0x00000000, and is what most of my
hardware returns. Apparently at least some GF7 cards (still) return
0x00000000, so also accept that as broken().
2013-11-01 10:53:09 +01:00
90bd39c4e3
d3d9/tests: Use color_match() in more places.
2013-10-31 09:58:43 +01:00
a17abf8d7d
d3d9/tests: Use explicit A calls.
2013-10-30 11:21:32 +01:00
3528393d64
d3d9/tests: Avoid windowsx.h.
2013-10-30 11:21:32 +01:00
60f62f4d48
d3d9/tests: Give stencil_cull_test its own device.
...
After drawing a quad with cullmode != none, the r500's Windows driver's
ability to clip clear rectangles to the viewport is permanently broken.
This shows up as a test failure in depth_buffer_test().
2013-10-29 20:07:07 +01:00
eeefed3dd0
d3d9: Update locked_rect only if wined3d_surface_map succeeds.
2013-10-28 19:31:12 +01:00
9c19266a24
d3d9/tests: Remove the rtpatch test.
...
It segfaults on Win7 + Nvidia Kepler and apparently returns different
return values on Windows 8. Since this functionality isn't supported on
any HW I doubt games will care.
2013-10-24 19:01:56 +02:00
f31d2485be
d3d9: Don't mask out internal wined3d usage flags in surface_init().
2013-10-02 11:05:39 +02:00
0e681027a2
tests: Compile the tests by default with -D__WINESRC__.
2013-10-02 11:04:02 +02:00
fe20ee1bc4
d3d9/tests: Add a volume V16U16 test.
2013-09-23 20:32:34 +02:00
0fb3aaac10
d3d9/tests: Implemented tests for IDirect3DSwapChain9Ex_GetDisplayModeEx.
2013-09-20 17:03:44 +02:00
cf01bb3d2a
d3d9/tests: Test if IDirect3DSwapChain9Ex is available with IDirect3D9(Ex).
2013-09-20 17:03:31 +02:00
edad7dea7e
d3d9: Partial implementation of IDirect3DSwapChain9Ex.
2013-09-20 17:03:20 +02:00
11ced88a37
d3d9: Avoid CONST.
2013-09-20 11:27:51 +02:00
708024f786
d3d9/tests: Read the caps from the device.
2013-09-19 19:49:40 +02:00
2f9d9b5032
d3d9/tests: Test invalid volume lock boxes.
2013-09-18 15:47:16 +02:00
50d2cdd0ea
d3d9/tests: Add tests for block-based volume formats.
2013-09-18 15:47:11 +02:00
674b1e922d
d3d9: Avoid LPVOID.
2013-09-13 10:57:05 +02:00
e55e24a731
d3d9: Avoid LPCWSTR.
2013-09-13 10:57:03 +02:00
53741d2bb9
d3d9/tests: D3DCMP_GREATER is broken on r500.
2013-09-12 17:48:51 +02:00
Francois Gouget