Henri Verbeet
4bd1f04fbd
wined3d: Check for depth/stencil surfaces in general in IWineD3DSurfaceImpl_Unmap().
...
Instead of just the current one.
2010-11-12 15:43:07 +01:00
Henri Verbeet
db013ed213
wined3d: Avoid marking samplers dirty in IWineD3DSurfaceImpl_Unmap().
...
Resources are explicitly loaded in context_apply_draw_state() when needed, the
resource location management takes care of all of this.
2010-11-12 15:43:07 +01:00
Henri Verbeet
3bbe658ef1
wined3d: Remove some useless code.
2010-11-11 13:11:37 +01:00
Henri Verbeet
78abb8ae07
wined3d: Simply use surface_modify_location() in IWineD3DSurfaceImpl_Map() with WINED3DLOCK_DISCARD.
...
The call to surface_add_dirty_rect() would have taken care of evicting the
other locations anyway, but we really shouldn't be touching the location flags
directly.
2010-11-11 13:11:34 +01:00
Henri Verbeet
d3fd7b247b
wined3d: Handle rendertargetlock_mode in surface_load_location().
2010-11-11 13:11:30 +01:00
Henri Verbeet
8e059205ba
wined3d: Translate drawable coordinates in flush_to_framebuffer_drawpixels().
2010-11-02 13:17:35 +01:00
Henri Verbeet
3f0d16c5bf
wined3d: Do not use "lockedRect" unless the surface is locked in flush_to_framebuffer_drawpixels().
2010-11-02 13:17:31 +01:00
Henri Verbeet
e35b6aa1a7
wined3d: Change surface_translate_frontbuffer_coords() to handle all drawable coordinates.
2010-11-01 13:34:43 +01:00
Henri Verbeet
27bf4c3747
wined3d: Remove some redundant state save/restore code from flush_to_framebuffer_drawpixels().
2010-10-29 14:33:57 +02:00
Henri Verbeet
7414ebc975
wined3d: Don't flip the coordinate system in set_blit_dimension().
2010-10-29 14:33:57 +02:00
Henri Verbeet
2b58f80c27
wined3d: Use surface_blt_to_drawable() in IWineD3DSurfaceImpl_BltOverride().
2010-10-21 16:15:31 +02:00
Henri Verbeet
574169174e
wined3d: Check if we can do the blit before messing with surface flags in IWineD3DSurfaceImpl_BltOverride().
...
As an added benefit blit_supported() will now get the rectangles in the
correct coordinate system.
2010-10-21 16:15:25 +02:00
Henri Verbeet
1237e8065e
wined3d: Properly flip in surface_blt_to_drawable().
...
We want to flip the coordinate system, not just the rectangle.
2010-10-19 13:50:13 +02:00
Henri Verbeet
8a96a8cc1f
wined3d: Always pass a valid rectangle to surface_get_blt_info().
2010-10-19 13:50:09 +02:00
Henri Verbeet
ca381b610c
wined3d: Allow FBO blits again between surfaces with fixups if they have the same format.
...
For some reason f1ca14cb5b
disabled this.
2010-10-19 13:50:01 +02:00
Henri Verbeet
1fa3365832
wined3d: Flip destination coordinates when blitting to an offscreen target in BltOverride().
2010-10-15 16:19:50 +02:00
Henri Verbeet
95469309d6
wined3d: Consistently use Map/Unmap for mapping resources.
2010-10-14 17:54:52 +02:00
Henri Verbeet
b68d257710
wined3d: Get rid of redundant comparisons against NULL / 0.
2010-09-14 09:43:33 -05:00
Henri Verbeet
8fbf23f0cc
wined3d: Don't overwrite the offscreen depth/stencil surface with undefined data in surface_load_ds_location().
2010-09-06 16:14:26 +02:00
Henri Verbeet
8e0cb60b09
wined3d: Do not call device_switch_onscreen_ds() while under the GL lock.
2010-09-06 16:14:18 +02:00
Henri Verbeet
bc2db78c3a
wined3d: Explicitly document some more consequences of GL locking policy.
...
The basic rule is that you can't call anything that takes the user32 / gdi32
lock while under the GL (winex11) lock. As a consequence, you can't call
anything like context_acquire() or context_destroy() either.
2010-09-03 11:05:10 +02:00
Henri Verbeet
6c4c351791
wined3d: Don't require wined3d object parents to be COM objects.
2010-09-01 14:01:02 +02:00
Henri Verbeet
3a7f08a56f
wined3d: Rename wined3d_format_desc to wined3d_format.
2010-08-31 14:23:47 +02:00
Henri Verbeet
4005eb2a18
wined3d: Get rid of WINED3DRECT.
2010-08-31 14:23:47 +02:00
Henri Verbeet
1bf25cfe3f
wined3d: Use debug_surflocation() in surface_load_location().
2010-08-31 14:23:46 +02:00
Henri Verbeet
c689280beb
wined3d: Use surface_color_fill() in IWineD3DDeviceImpl_ColorFill().
2010-08-30 11:26:45 +02:00
Henri Verbeet
ecc67757ab
wined3d: Introduce surface_color_fill().
...
This is also a first attempt at a more structured interface to blitter
operations.
2010-08-30 11:26:45 +02:00
Henri Verbeet
b233e7b301
wined3d: Rename the "format" field in wined3d_format_desc to "id".
2010-08-26 12:41:44 +02:00
Henri Verbeet
42b814c7d1
wined3d: Remove the GetContainer() methods from the public wined3d interface.
...
There's nothing left that uses these.
2010-08-26 12:41:39 +02:00
Henri Verbeet
22428d97e1
wined3d: Don't set a NULL container of type WINED3D_CONTAINER_TEXTURE.
...
Any container type other than WINED3D_CONTAINER_NONE implies a valid pointer
of the specified type. This fixes a regression introduced by
368e5eb87a
.
2010-08-26 12:41:34 +02:00
Henri Verbeet
87e12b8b6a
wined3d: Introduce a local variable for gl_info in IWineD3DSurfaceImpl_BltOverride().
2010-08-25 11:57:12 +02:00
Henri Verbeet
cc5271d1b7
wined3d: Rename WINED3DFORMAT to wined3d_format_id.
2010-08-24 12:25:01 +02:00
Henri Verbeet
50b5955288
wined3d: Use floating point colors in the blitter's color_fill functions.
2010-08-24 12:24:39 +02:00
Henri Verbeet
9956ea7044
wined3d: Convert from floating point to specific surface formats.
...
Instead of from WINED3DFMT_B8G8R8A8_UNORM.
2010-08-24 12:24:33 +02:00
Henri Verbeet
a455a918c1
wined3d: Explicitly pass the draw rect to device_clear_render_targets().
...
For regular clears this is the intersection of the viewport and scissor
rectangles, but color fills shouldn't be affected by those.
2010-08-24 12:24:28 +02:00
Henri Verbeet
b93a9b37fa
wined3d: Pass a WINED3DCOLORVALUE structure to IWineD3DDeviceImpl_ClearRendertargetView().
...
The structure is nicer to work with than the array.
2010-08-23 12:05:24 +02:00
Henri Verbeet
910d3022c3
wined3d: Do not release a reference we do not have in IWineD3DSurfaceImpl_Flip().
...
This fixes a regression introduced by 368e5eb87a
.
2010-08-20 14:11:10 +02:00
Henri Verbeet
f06b22a537
wined3d: Add a TRACE to IWineD3DSurfaceImpl_LoadTexture().
2010-08-18 09:39:42 +02:00
Henri Verbeet
368e5eb87a
wined3d: Avoid IWineD3DSurface_GetContainer().
2010-08-17 11:55:32 +02:00
Henri Verbeet
8292c687d8
wined3d: Get rid of the now redundant SFLAG_SWAPCHAIN surface flag.
2010-08-17 11:55:32 +02:00
Henri Verbeet
0b24db5db5
wined3d: Also store the subresource container type.
2010-08-17 11:55:32 +02:00
Henri Verbeet
61db577a4b
wined3d: Remove SetContainer() from the public IWineD3DSurface interface.
2010-08-17 11:55:32 +02:00
Henri Verbeet
a16cf58494
wined3d: Fix a couple of typos.
2010-08-16 13:47:53 +02:00
Henri Verbeet
d494dfb6c0
wined3d: Rename surface_calculate_size() to wined3d_format_calculate_size().
2010-08-16 13:47:42 +02:00
Henri Verbeet
3a36013065
wined3d: Print the correct resource location in surface_set_texture_name().
2010-08-16 13:47:33 +02:00
Henri Verbeet
e1188b0c8e
wined3d: Fix some misspellings of "surface".
2010-08-16 13:47:17 +02:00
Henri Verbeet
5f2fcfdd6b
wined3d: Reattach FBO attachments when any of the corresponding surfaces is unloaded.
2010-08-16 13:47:08 +02:00
Henri Verbeet
2b88b2d351
wined3d: Only try to acquire a context in surface_cleanup() if there are GL resources to be destroyed.
...
The reason we're in surface_cleanup() might for example be that context
creation failed.
2010-08-04 13:24:21 +02:00
Henri Verbeet
88ff3f406d
wined3d: Always set the get_drawable_size() surface function.
2010-08-03 11:06:47 +02:00
Henri Verbeet
b2e1e1fd71
wined3d: Pass the color as floating point values to device_clear_render_targets().
2010-08-03 11:06:42 +02:00
Henri Verbeet
6e68dd52c4
wined3d: Use the correct divider for 15-bit depth formats in IWineD3DSurfaceImpl_BltZ().
2010-08-03 11:06:20 +02:00
Henri Verbeet
6874743e78
wined3d: Add a missing return statement to surface_prepare_texture().
...
Calling surface_prepare_texture_internal() twice on the same surface is
harmless, but unnecessary.
2010-07-26 18:38:31 +02:00
Henri Verbeet
0bf68b846a
wined3d: Merge strect_rect_fbo() and surface_load_srgb_fbo().
2010-07-26 18:38:31 +02:00
Henri Verbeet
943fb2fb57
wined3d: Do RGB <=> sRGB transfers using FBO blits.
...
Concept based on a patch by Stefan.
2010-07-26 18:38:31 +02:00
Henri Verbeet
d374d85055
wined3d: Clear all render targets in an MRT setup.
2010-07-23 11:46:47 +02:00
Henri Verbeet
f7760656f3
wined3d: Remove LoadLocation() from the public wined3d surface interface.
2010-07-22 10:13:24 +02:00
Henri Verbeet
147f24dd78
wined3d: Remove ModifyLocation() from the public wined3d surface interface.
2010-07-22 10:13:13 +02:00
Henri Verbeet
c411b45da9
wined3d: Use a more consistent name for the normalized texrect "extension".
2010-07-21 09:33:18 +02:00
Henri Verbeet
4b850ed121
wined3d: Remove restoring the read buffer from read_from_framebuffer_texture().
...
The few functions that care about the read buffer should explicitly set it
themselves, instead of assuming any particular state.
2010-07-20 13:13:04 +02:00
Francois Gouget
7649c75b40
Assorted typo and spelling fixes.
2010-06-24 10:37:05 +02:00
Henri Verbeet
b769c912cc
wined3d: read_from_framebuffer_texture() isn't suitable for readback of onscreen surfaces.
2010-06-22 13:51:30 +02:00
Matteo Bruni
6585bec5ac
wined3d: Check for error conditions in GL call.
2010-06-22 11:22:38 +02:00
Henri Verbeet
1b5cc39a86
wined3d: Get rid of some dead code.
2010-06-01 11:03:56 +02:00
Roderick Colenbrander
ba09e7a2a1
wined3d: Don't use blit_supported() in d3dfmt_get_conv for now.
2010-05-27 14:46:43 +02:00
Roderick Colenbrander
e54f06183c
wined3d: Replace set_shader call with unset_shader in blt_to_drawable.
...
The blit_shader is activated before draw_textured_quad, so after use
it should be deactivated instead of being activated again.
2010-05-27 14:46:43 +02:00
Henri Verbeet
e8ac9bbd7f
wined3d: Get rid of GLINFO_LOCATION.
2010-05-25 13:29:00 +02:00
Henri Verbeet
db0784e1da
wined3d: Introduce a separate function for translating front buffer coordinates to GL coordinates.
2010-05-21 14:37:52 +02:00
Henri Verbeet
a2a58a21d8
wined3d: Translate front buffer coordinates in surface_blt_to_drawable().
2010-05-20 13:47:53 +02:00
Henri Verbeet
f0888577c5
wined3d: Use wine_dbgstr_rect() for tracing the rectangle in IWineD3DSurfaceImpl_LockRect().
2010-05-19 16:57:59 +02:00
Roderick Colenbrander
f892003194
wined3d: Set conversion flags for format descriptors having a convert function.
2010-05-17 14:43:49 +02:00
Henri Verbeet
79145e215b
wined3d: Add support for shadow samplers.
2010-05-17 13:19:53 +02:00
Henri Verbeet
44ab3d70f1
wined3d: Handle depth/stencil surfaces in IWineD3DSurfaceImpl_LoadLocation().
2010-05-17 13:19:40 +02:00
Roderick Colenbrander
b60961ae55
wined3d: Use surface_prepare_texture for surface allocation in read_from_framebuffer_texture.
2010-05-11 11:04:55 +02:00
Henri Verbeet
49e076eabd
wined3d: Separate context acquisition and state application.
2010-05-04 13:14:59 +02:00
Henri Verbeet
f09b8e454d
wined3d: Avoid some needless depth buffer copies.
...
If an application switches between render targets of a different size, but
with the same depth/stencil surface it'll typically clear the depth/stencil
surface before drawing. However, in case of the smaller render target that
wouldn't be a full clear, so we'd have to do a depth copy if we also switched
between onscreen and offscreen rendering. Keeping track of which part of the
depth/stencil surface is current for onscreen/offscreen allows us to avoid
most of these kinds of copies. The current scheme requires the current/dirty
rectangle to have an origin at (0,0). This could be extended to an arbitrary
rectangle, but the bookkeeping becomes somewhat more complex in that case, and
it's not clear that there would be much of a benefit at this point.
2010-04-29 10:19:39 -05:00
Henri Verbeet
83cf1ce8e1
wined3d: Check if the depth/stencil surface has any valid location at the start of surface_load_ds_location().
2010-04-28 07:32:05 -05:00
Henri Verbeet
0d86323778
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_release_client_storage().
2010-04-28 07:31:28 -05:00
Henri Verbeet
23a377f02b
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_init_sysmem().
2010-04-28 07:31:13 -05:00
Henri Verbeet
42375518ba
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_add_dirty_rect().
2010-04-27 12:02:39 -05:00
Henri Verbeet
f78d85ffe1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_texture_target().
2010-04-27 12:02:31 -05:00
Henri Verbeet
294d9dae8f
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_texture_name().
2010-04-27 12:02:24 -05:00
Henri Verbeet
d977e91b11
wined3d: Store back buffer surfaces as IWineD3DSurfaceImpl pointers in the swapchain.
2010-04-27 12:02:14 -05:00
Henri Verbeet
62acb2fdbc
wined3d: Store the front buffer surface as an IWineD3DSurfaceImpl pointer in the swapchain.
2010-04-27 12:01:59 -05:00
Henri Verbeet
32b1f25f4b
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_force_reload().
2010-04-26 09:04:56 -05:00
Henri Verbeet
553f429964
wined3d: Simply pass IWineD3DSurfaceImpl pointers to IWineD3DSurfaceImpl_BltOverride().
2010-04-26 09:04:48 -05:00
Henri Verbeet
d1ea48b971
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_internal_preload().
2010-04-26 09:04:35 -05:00
Henri Verbeet
bea50a39de
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to fb_copy_to_texture_hwstretch().
2010-04-25 07:28:18 -05:00
Henri Verbeet
99994f885c
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to fb_copy_to_texture_direct().
2010-04-25 07:28:07 -05:00
Henri Verbeet
9308c5499f
wined3d: Make sure all texture levels are allocated in surface_prepare_texture().
...
This fixes a regression introduced by commit
af7dfcd378
.
2010-04-25 07:27:36 -05:00
Henri Verbeet
6b34b8e6d1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_acquire().
2010-04-22 11:28:17 +02:00
Henri Verbeet
660ad06692
wined3d: Simply pass implementation pointers to stretch_rect_fbo().
2010-04-21 11:57:32 +02:00
Henri Verbeet
79a014a505
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_get_gl_buffer().
2010-04-21 11:57:32 +02:00
Henri Verbeet
c5de1e1045
wined3d: Store the depth/stencil surface as an IWineD3DSurfaceImpl pointer in the device.
2010-04-20 11:14:42 +02:00
Henri Verbeet
c7a1848656
wined3d: Store render targets as IWineD3DSurfaceImpl pointers in the device.
2010-04-20 11:14:30 +02:00
Henri Verbeet
92a44884c7
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_compatible_renderbuffer().
2010-04-19 14:55:35 +02:00
Henri Verbeet
03dc612c9c
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_is_offscreen().
2010-04-19 14:55:31 +02:00
Henri Verbeet
efb3993a3a
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_modify_ds_location().
2010-04-19 14:55:24 +02:00
Henri Verbeet
ae46589f53
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_load_ds_location().
2010-04-19 14:55:19 +02:00
Henri Verbeet
10c5a8ac9e
wined3d: Get rid of "myDevice".
2010-04-19 14:55:13 +02:00
Henri Verbeet
24c93d48aa
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_attach_depth_stencil_fbo().
2010-04-16 12:09:39 +02:00
Henri Verbeet
bc2850a587
wined3d: Get rid of the width and height parameters to surface_upload_data().
2010-04-16 12:09:27 +02:00
Henri Verbeet
212bfab2df
wined3d: Get rid of the width and height parameters to surface_allocate_surface().
2010-04-16 12:09:23 +02:00
Henri Verbeet
7f6ab3c06e
wined3d: The currentDesc and pow2 width/height are the same for power of two textures.
2010-04-16 12:09:19 +02:00
Henri Verbeet
65797d7f75
wined3d: Get rid of glRect from IWineD3DSurfaceImpl.
...
604caf0caa
supposedly removed the "oversized
texture" code, but this was still left over.
2010-04-16 12:09:14 +02:00
Roderick Colenbrander
bf58d81968
wined3d: Remove paletteOverride from BltOverride offscreen->render_target blit.
...
This code was needed when the destination uses 8-bit and the source lacked a palette.
Since we don't allow destination fixups, this code doesn't do anything. At a later
stage something like this should perhaps be readded to specific backends.
2010-04-15 17:03:59 +02:00
Roderick Colenbrander
4cb6255907
wined3d: We don't need color keying for sysmem->drawable uploads.
2010-04-15 17:03:52 +02:00
Roderick Colenbrander
2a949ec323
wined3d: Remove call to d3dfmt_get_conv from read_from_framebuffer_texture.
2010-04-15 17:03:49 +02:00
Roderick Colenbrander
1a61f46bbb
wined3d: Remove temporary conv_byte_count fixup from d3dfmt_get_conv.
2010-04-15 17:03:47 +02:00
Roderick Colenbrander
bccfd7cc06
wined3d: Add BLT_OP_COLOR_FILL to blit_supported and use it in BltOverride.
2010-04-15 14:20:48 +02:00
Roderick Colenbrander
4c87bc0c41
wined3d: Move A4L4 conversion to the formats table.
2010-04-14 18:00:47 +02:00
Roderick Colenbrander
cda78c01e6
wined3d: Move G16R16/R16G16F conversion to the formats table.
2010-04-14 18:00:47 +02:00
Henri Verbeet
8eb2a2cf0c
wined3d: Disable strict draw ordering by default.
...
While some performance hit from the extra flushes was expected and would be
acceptable, the performance hit can be over 50% on some configurations, which
clearly isn't acceptable. This patch introduces a "StrictDrawOrdering"
registry key for applications affected by this, until we have a more
structural solution.
2010-04-13 21:13:36 +02:00
Roderick Colenbrander
e35f54ef1f
wined3d: Move R32G32F convertion to the formats table.
2010-04-13 17:56:35 +02:00
Roderick Colenbrander
5c635f4146
wined3d: Move D15S1 over to the formats table.
2010-04-13 17:56:32 +02:00
Roderick Colenbrander
6a081ef95a
wined3d: Move D24X4S4 to the formats table.
2010-04-13 17:56:29 +02:00
Roderick Colenbrander
485040bb5c
wined3d: Move D24FS8 to formats table.
2010-04-13 17:56:27 +02:00
Roderick Colenbrander
798ba56c1b
wined3d: Move L6V5U5 conversion to the formats table.
2010-04-13 17:56:24 +02:00
Roderick Colenbrander
76a9712779
wined3d: Add an initial implementation of arbfp_blit_surface.
2010-04-09 16:50:21 +02:00
Roderick Colenbrander
f1ca14cb5b
wined3d: Add an initial fbo_blit_supported implementation.
2010-04-09 16:50:21 +02:00
Roderick Colenbrander
7df7ce40c3
wined3d: Move X8L8V8U8 surface conversion to the format table.
2010-04-09 16:50:21 +02:00
Roderick Colenbrander
60c6294f84
wined3d: Move Q8W8V8U8 conversion to the format table.
2010-04-09 16:50:20 +02:00
Roderick Colenbrander
d7e1b973c7
wined3d: Start moving texture format fixups to the formats table.
2010-04-09 16:50:20 +02:00
Roderick Colenbrander
a4559e761b
wined3d: Move srgb checks away from d3dfmt_get_conv.
2010-04-09 16:50:20 +02:00
Roderick Colenbrander
00598c3e36
wined3d: Let d3dfmt_get_conv return a wined3d_format_desc.
2010-04-09 16:50:20 +02:00
Roderick Colenbrander
1c02a909e5
wined3d: Remove remaining redundant code from d3dfmt_get_conv.
2010-04-08 17:34:18 +02:00
Roderick Colenbrander
2c5eee25ca
wined3d: Only apply float R16G16F/R32G32F fixup when ARB_texture_rg isn't around and remove redundant code.
2010-04-07 18:14:05 +02:00
Roderick Colenbrander
edcdbc2a76
wined3d: Remove redundant gl format/type code from d3dfmt_get_conv since it is already in the table.
2010-04-07 18:13:49 +02:00
Roderick Colenbrander
e7a71e15b5
wined3d: Turn blit_shader color_fixup_supported into blit_supported.
2010-04-07 18:13:35 +02:00
Henri Verbeet
83443273c1
wined3d: Pass the correct window to Present() in IWineD3DSurfaceImpl_Flip().
2010-04-07 13:50:16 +02:00
Henri Verbeet
3b7774b37b
wined3d: Pass the correct window to Present() in IWineD3DSurfaceImpl_BltOverride().
2010-04-07 13:50:12 +02:00
Roderick Colenbrander
e6ae272efe
wined3d: Due to code rewrites is_color_fixup_supported is not needed anymore in RealizePalette.
...
The code in question should be executed in all cases. This also fixes
palette refresh issues when shaders / paletted textures aren't around.
2010-04-06 13:55:14 +02:00
Roderick Colenbrander
1f2976a302
wined3d: Move the arbfp p8 fixup to the format table and get rid of the d3dfmt_get_conv override.
2010-04-06 13:55:02 +02:00
Roderick Colenbrander
a5a4be4fc5
wined3d: Disable framebuffer to texture blitting.
...
The current code doesn't work for this at all and causes major
rendering issues in e.g. C&C. I don't think we should fix this code
either since it isn't worth the effort and requires evil things like
paletteOverride.
2010-04-06 13:54:47 +02:00
Roderick Colenbrander
69902ab6d0
wined3d: Move EXT_PALETTED_TEXTURE code over to ffp_blit.
2010-04-06 13:53:21 +02:00
Roderick Colenbrander
3b6aea5934
wined3d: Move palette uploading code over to arbfp blit_shader.
2010-04-06 13:53:15 +02:00
Roderick Colenbrander
ae8d9e21e3
wined3d: Remove the swapchain parameter from fb_copy_to_texture_hwstretch in order to unify all blit calls.
2010-04-02 15:22:51 +02:00
Roderick Colenbrander
ff82e66a69
wined3d: Move upsideDown calculation to blit implementation.
2010-04-02 15:22:51 +02:00
Roderick Colenbrander
c6f0ddcb1a
wined3d: Remove some unneeded source rectangle calculations from BltOverride.
2010-03-31 16:12:30 +02:00
Roderick Colenbrander
87b5b2f738
wined3d: Remove the last use of the WINED3DRECT destination rectangle in BltOverride.
2010-03-31 16:12:30 +02:00
Roderick Colenbrander
40f3f0b041
wined3d: Use RECT instead of WINED3DRECT in fb_copy_to_texture_hwstretch.
2010-03-31 16:12:29 +02:00
Roderick Colenbrander
7f1f61e28e
wined3d: Use RECT instead of WINED3DRECT in fb_copy_to_texture_direct.
2010-03-31 16:12:28 +02:00
Roderick Colenbrander
ae26d9defd
wined3d: Use RECT instead of WINED3DRECT in stretch_rect_fbo.
2010-03-31 16:12:27 +02:00
Roderick Colenbrander
c864ae6348
wined3d: Disable flipping through the source rectangle in BltOverride.
2010-03-30 14:10:45 +02:00
Roderick Colenbrander
334fea7d79
wined3d: Fix a destination flipping bug using the destination rectangle.
2010-03-30 14:10:37 +02:00
Roderick Colenbrander
a91f844a3d
wined3d: Use RECT instead of WINED3DRECT in more parts of BltOverride.
2010-03-30 13:54:45 +02:00
Roderick Colenbrander
682c969e9a
wined3d: Add a helper function for getting a valid rectangle.
2010-03-30 13:54:35 +02:00
Roderick Colenbrander
a7d3b616c4
wined3d: Add color_fill to blit_shader.
2010-03-30 13:54:24 +02:00
Roderick Colenbrander
9a1fd552d2
wined3d: Introduce a helper function which converts a color from the surface format to ARGB.
2010-03-30 13:54:12 +02:00
Roderick Colenbrander
5ffb088975
wined3d: Fix depth blit regression.
2010-03-22 11:40:40 +01:00
Henri Verbeet
3aaa6ee6e7
wined3d: Rename GlPixelFormatDesc to wined3d_format_desc.
2010-03-19 14:31:47 +01:00
Roderick Colenbrander
fb8812db89
wined3d: Get rid of d3dfmt_get_conv in RealizePalette.
2010-03-19 13:15:26 +01:00
Roderick Colenbrander
27a96e477a
wined3d: Start moving paletted texture support to the blit_shader.
2010-03-19 13:15:21 +01:00
Roderick Colenbrander
fd99ab78c2
wined3d: Use draw_textured_quad in BltOverride.
2010-03-19 13:15:06 +01:00
Roderick Colenbrander
4bd627cc7f
wined3d: Add a helper function for drawing a textured quad.
2010-03-19 13:15:03 +01:00
Henri Verbeet
e5673ddbc3
wined3d: Add a quirk to rebind FBOs when one of their attached textures is updated.
...
Updating a texture while it is attached to the currently bound FBO is
something GL implementations tend to get wrong. NVIDIA fails at
glTexSubImage2D(), fglrx and Mesa with glTexImage2D(). I'm afraid to try what
happens on OS X. Fortunately we never use glTexImage2D() while a texture is
attached to an FBO, so we only need to care about glTexSubImage2D().
2010-03-18 10:24:41 +01:00
Henri Verbeet
bd4fb33a52
wined3d: Unify GLINFO_LOCATION in surface.c.
2010-03-18 10:24:33 +01:00
Henri Verbeet
0ae49c35fb
wined3d: Use the context's window handle in IWineD3DSurfaceImpl_BltOverride().
2010-03-16 11:44:55 +01:00
Henri Verbeet
8a107bc63a
wined3d: Kill pbuffer offscreen rendering support.
...
Our pbuffer support is broken, nobody cares.
2010-03-15 15:55:38 +01:00
Roderick Colenbrander
604caf0caa
wined3d: Remove oversize texture support.
2010-03-15 14:23:15 +01:00
Roderick Colenbrander
74bf524a99
wined3d: Use surface_get_blt_info to compute texture coordinates for surface_blt_to_drawable.
2010-03-15 14:22:57 +01:00
Roderick Colenbrander
360384277b
wined3d: Extend surface_get_depth_blt_info with texture coordinate code from surface_blt_to_drawable.
2010-03-15 14:22:44 +01:00
Roderick Colenbrander
c0ef7a1a93
wined3d: Move the 8-bit palette shader code over to the blit_shader backend.
2010-03-03 12:53:51 +01:00
Stefan Dösinger
5c4d3fb5a2
wined3d: Control SFLAG_CONVERTED in surface_prepare_texture.
...
This makes sure that the flag is set correctly when
surface_allocate_surface is called and client storage is disabled
properly for converted surfaces.
2010-02-17 16:50:38 +01:00
Henri Verbeet
af7dfcd378
wined3d: Do not preload surfaces when attaching them to an FBO.
...
Just make sure the texture is allocated, so we have something to attach. Note
also that context_apply_attachment_filter_states() runs under the GL lock, so
preloading resources is actually unsafe there.
2010-02-04 13:39:26 +01:00
Henri Verbeet
02e0b3ae1a
wined3d: Introduce surface_prepare_texture().
...
Similar to surface_prepare_system_memory(). In the long term we'll probably
want to move the whole location management to resource.c and unify buffers and
textures there.
2010-02-04 13:39:26 +01:00
Henri Verbeet
b0583a2410
wined3d: Never acquire a context in IWineD3DSurfaceImpl_BindTexture().
...
The caller is already responsible for doing this, so it's redundant at best.
2010-02-04 13:39:26 +01:00
Henri Verbeet
c03d367d3c
wined3d: Get rid of an unnecessary GetContainer() call in surface_blt_to_drawable().
2010-01-29 13:30:06 +01:00
Henri Verbeet
ce42470138
wined3d: Ensure draw ordering across contexts.
2010-01-28 11:07:59 +01:00
Henri Verbeet
ea2f7a2739
wined3d: Remove some redundant returns.
2009-12-30 13:31:26 +01:00
Henri Verbeet
a215d326a5
wined3d: Get rid of the "swapchain" parameter to surface_get_gl_buffer().
...
Casting the container to "IWineD3DSwapChainImpl *" is always safe when
SFLAG_SWAPCHAIN is set on the surface. Most callers don't have a real
need for the swapchain, and end up calling GetContainer() just to pass
it to surface_get_gl_buffer().
2009-12-16 12:22:18 +01:00
Henri Verbeet
97f04248fc
wined3d: Use surface_is_offscreen() in flush_to_framebuffer_drawpixels().
2009-12-16 12:22:03 +01:00
Henri Verbeet
bf113bd284
wined3d: Use surface_is_offscreen() in read_from_framebuffer_texture().
2009-12-16 12:21:58 +01:00
Henri Verbeet
51438eec46
wined3d: Use surface_is_offscreen() in fb_copy_to_texture_hwstretch().
2009-12-16 12:21:50 +01:00
Stefan Dösinger
cde3217268
wined3d: Properly release client storage memory.
2009-12-15 16:09:12 +01:00
Henri Verbeet
82556b613e
wined3d: Let the context handle the draw buffer in fb_copy_to_texture_hwstretch().
2009-12-14 12:04:05 +01:00
Henri Verbeet
59db3ecaa0
wined3d: Let the context handle the draw buffer in flush_to_framebuffer_drawpixels().
2009-12-14 12:04:05 +01:00
Henri Verbeet
b3defd4c80
wined3d: Rename "wineD3DDevice" to "device".
2009-12-10 11:54:47 +01:00
Henri Verbeet
b6ef17f23d
wined3d: Remove unused GetDevice() implementations.
2009-12-09 13:51:04 +01:00
Henri Verbeet
54f3dec8e6
wined3d: Rename the "wineD3D" device field to "wined3d".
2009-12-08 12:33:29 +01:00
Stefan Dösinger
817714912b
wined3d: Infrastructure to render swapchains to a FBO.
2009-12-07 14:33:24 +01:00
Stefan Dösinger
64291c60cb
wined3d: A function for checking if a surface is offscreen.
2009-12-07 14:32:54 +01:00
Stefan Dösinger
54f0d3f785
wined3d: Add a function for initializing surface sysmem.
2009-12-07 14:32:29 +01:00
Stefan Dösinger
6a19339207
wined3d: Remove needless NULL checks (coverity).
2009-12-03 11:45:15 +01:00
Marcus Meissner
9f8a73ab96
wined3d: Check for NULL before context_release (Coverity).
2009-11-03 21:22:46 +01:00
Henri Verbeet
bf10dbe8a6
wined3d: Map D3DFMT_D24S8 to WINED3DFMT_D24_UNORM_S8_UINT.
...
The internal order of the depth and stencil bits is unspecified since the
format isn't lockable.
2009-10-30 11:28:52 +01:00
Henri Verbeet
111307dfba
wined3d: Get rid of the GL_SUPPORT macro.
2009-10-29 13:09:33 +01:00
Henri Verbeet
48e03bc189
wined3d: Introduce a separate structure for various OpenGL implementation limits.
2009-10-29 13:09:27 +01:00
Henri Verbeet
eeb54b9922
wined3d: Keep better track of where we're using wined3d contexts.
...
The idea here is that we can restore the thread's current GL context on
context_release() if it doesn't correspond to the current wined3d context on
context_acquire().
2009-10-28 11:15:19 +01:00
Henri Verbeet
ade350b4d4
wined3d: Compare and copy the actual palette in palette9_changed() (Valgrind).
2009-10-23 12:03:37 +02:00
Henri Verbeet
6be41fd59a
wined3d: Get rid of GL_LIMITS.
2009-10-22 10:46:05 +02:00
Henri Verbeet
55047f811a
wined3d: Fix some GLINFO_LOCATION abuse.
2009-10-22 10:45:57 +02:00
Henri Verbeet
47c84f4f7f
wined3d: Use the DXGI naming convention for all formats.
2009-09-25 15:15:44 +02:00
Stefan Dösinger
4fe014cb54
wined3d: Fix sRGB->RGB copy condition.
...
The old condition happened to work, because SFLAG_INTEXTURE was not
set(we're loading it), and neither was SFLAG_INDRAWABLE(otherwise
INTEXTURE would be set too). If the fbo INDRAWABLE == INTEXTURE is
replaced by INDRAWABLE == INSRGBTEX this doesn't hold true any longer
because SFLAG_INDRAWABLE is set, but not used because the drawable
readback is never used for fbos.
2009-09-23 13:25:33 +02:00
Stefan Dösinger
33ca3c0207
wined3d: Don't mark SFLAG_INTEXTURE up to date with fbo stretchrect.
...
FBO stretchrect marks SFLAG_INDRAWABLE up to date, which currently
also marks SFLAG_INTEXTURE up to date. However, this will change when
we enable rendering to the srgb copy, in which case the drawable could
be equal to the srgb copy, not the rgb copy.
2009-09-23 13:25:21 +02:00
Stefan Dösinger
5b5e3bd0d2
wined3d: Track GL texture states in a separate structure.
2009-09-23 13:24:16 +02:00
Henri Verbeet
34dd27e3a8
wined3d: Don't create a depthstencil renderbuffer if ARB_framebuffer_object is supported.
2009-09-23 12:37:06 +02:00
Henri Verbeet
ec97383f6f
wined3d: Add support for ARB_framebuffer_object.
2009-09-23 12:37:00 +02:00
Henri Verbeet
0a4fa886a7
wined3d: Revert 4ba16b84a9
.
...
Unfortunately surface_can_stretch_rect() doesn't check just for
WINED3DFMT_FLAG_FBO_ATTACHABLE.
2009-09-22 16:16:55 +02:00
Henri Verbeet
dbc4dfc495
wined3d: Move "parent_ops" to IWineD3DResourceClass.
2009-09-18 08:55:33 -05:00
Henri Verbeet
4ba16b84a9
wined3d: Get rid of some redundant checks for ORM_FBO.
...
ORM_FBO is already implied by surface_can_stretch_rect() because
WINED3DFMT_FLAG_FBO_ATTACHABLE can only be set when ORM_FBO is.
2009-09-17 10:09:50 -05:00
Henri Verbeet
a5214c306f
wined3d: Don't free D3D surfaces until the wined3d surface is destroyed.
...
This prevents for example a d3d9 depth stencil from being destroyed when it
has no external references but is still in use by the device/stateblock. A
nice side effect is that it simplifies handling of "implicit" surfaces like
the frontbuffer and backbuffers, as well as the forwarding of reference counts
for surfaces that are part of a texture.
2009-09-16 13:04:32 -05:00
Stefan Dösinger
e1469961d4
wined3d: Test and fix ddraw and d3d9 GetDC differences.
...
The MSDN is not totally correct: A8R8G8B8 and A1R5G5B5 also allow GetDC. The
main differences that have to be filtered out in d3d9.dll are GetDC on
A8B8G8R8, X8B8G8R8 and P8.
2009-09-08 13:04:52 +02:00
Henri Verbeet
560d63548d
wined3d: Remove trailing spaces.
2009-08-27 11:45:37 +02:00
Stefan Dösinger
52731a80c8
wined3d: Make it clear that glFlush and glFinish are WGL functions.
2009-08-26 14:35:41 +02:00
Rico Schüller
d9784c1a2f
wined3d: Fix some checkGLcalls.
2009-08-19 14:41:49 +02:00
Henri Verbeet
b8078fc747
wined3d: Use WINED3D_UNMAPPED_STAGE in some more places.
2009-08-17 13:57:50 +02:00
Henri Verbeet
ecd2dc7603
wined3d: Make RTL_READTEX the default rendertarget locking method.
...
For most cards this should make more sense than RTL_READDRAW, even if e.g.
surface_upload_data() has some room for improvement.
2009-08-14 13:59:09 +02:00
Roderick Colenbrander
5a00c8053e
wined3d: Get rid of two dead render target lock mode options.
2009-08-10 13:10:49 +02:00
Henri Verbeet
a7251f0f4e
wined3d: Track render_offscreen in the context.
...
This makes sure the relevant states in FindContext() are actually marked dirty
when needed.
2009-08-06 17:26:30 +02:00
Henri Verbeet
351d6de818
wined3d: Add functions to lookup texture filters.
2009-08-05 11:20:09 +02:00
Stefan Dösinger
f3b39d9085
wined3d: Preload the correct texture location.
2009-08-05 11:19:35 +02:00
Henri Verbeet
b7812932bc
wined3d: Don't respecify compressed textures in surface_upload_data().
...
Passing NULL to glCompressedTexImage2DARB() doesn't work particularly well
when both client storage and PBOs are enabled. Also, two years is long enough
to give driver developers a chance to fix the bug this was supposed to work
around.
2009-08-03 15:01:55 +02:00
Henri Verbeet
da1e5573da
wined3d: Rename WineD3DContext to struct wined3d_context.
2009-08-03 15:01:48 +02:00
Henri Verbeet
be536ebe2f
wined3d: Get rid of activeContext.
2009-07-24 13:10:57 +02:00
Henri Verbeet
c8fe24d29e
wined3d: Explicitly pass the context to surface_load_ds_location().
2009-07-24 13:10:47 +02:00
Henri Verbeet
ee4d18cc83
wined3d: Pass NULL to ActivateContext() when we don't need a specific target.
...
Once we keep track of the wined3d context for each thread,
lastActiveRenderTarget won't do what we want here.
2009-07-21 14:22:44 +02:00
Henri Verbeet
710f6f8456
wined3d: Always use context_bind_fbo() to change the framebuffer binding.
2009-07-17 11:22:07 +02:00
Henri Verbeet
7485173849
wined3d: Pass the context instead of the device to the various context functions.
2009-07-17 11:22:07 +02:00
Henri Verbeet
43e6686a78
wined3d: Rename _WineD3D_GL_Info to struct wined3d_gl_info.
2009-07-17 11:22:07 +02:00
Stefan Dösinger
3c2fa6aea4
wined3d: Set the depth blit helper texture address mode to clamp.
...
On ATI cards we use the driver's GL_ARB_texture_non_power_of_two emulation to
support conditional NP2 textures without having to deal with the denormalized
coordinates. The default GL_TEXTURE_2D address mode is incompatible with
GL_ARB_texture_rectangle however.
2009-07-15 13:17:12 +02:00
Henri Verbeet
69b7612265
wined3d: Get rid of struct glDescriptor.
...
In general it might not be a bad idea to group GL specific data into a
separate struct, but IWineD3DSurfaceImpl is currently the only thing that
bothers. It doesn't get it quite right either, since e.g. the PBO isn't in
glDescriptor either.
2009-07-10 12:13:24 +02:00
Henri Verbeet
038d939941
wined3d: Remove GetGlDesc() from the public IWineD3DSurface interface.
2009-07-10 12:13:09 +02:00
Henri Verbeet
32fd8f2130
wined3d: checkGLcall() doesn't need a \n.
2009-07-07 11:50:22 +02:00
Henri Verbeet
2ac34bf231
wined3d: Add some missing float suffixes.
...
The compiler should be smart enough to fix most of these, but it looks sloppy.
2009-07-07 11:50:05 +02:00
Henri Verbeet
532b99078e
wined3d: Don't abuse blending to disable color writes in surface_depth_blt().
2009-07-03 13:05:52 +02:00
Henri Verbeet
7363b6e2e3
wined3d: Document GL context dependencies.
2009-06-26 12:05:07 +02:00
Henri Verbeet
626baad817
wined3d: Make sure we have an active GL context before calling d3dfmt_p8_upload_palette().
2009-06-26 12:05:00 +02:00
Henri Verbeet
1b306c25e2
wined3d: Make sure we have an active GL context before calling surface_remove_pbo().
2009-06-26 12:04:57 +02:00
Henri Verbeet
db5b126da6
wined3d: Make sure we have an active GL context in IWineD3DSurfaceImpl_UnLoad().
2009-06-26 12:04:53 +02:00
Stefan Dösinger
20401fa9af
wined3d: Invalidate the srgb tex in surface::unload.
2009-06-22 11:25:57 +02:00
Henri Verbeet
51902b89fb
wined3d: Remove a redundant ActivateContext() call in IWineD3DSurfaceImpl_UnlockRect().
...
The various LoadLocation() handlers already take care of activating an
appropriate context.
2009-06-18 15:17:27 +02:00
Henri Verbeet
c7b684f345
wined3d: Simplify IWineD3DSurfaceImpl_LockRect() a bit.
2009-06-18 15:17:27 +02:00
Stefan Doesinger
7d5285acc1
wined3d: Properly free srgb textures.
2009-06-18 15:17:26 +02:00
Michael Abbott
2e119a2718
wined3d: Remove division from inner loop.
2009-06-18 15:17:26 +02:00
Henri Verbeet
dad6c311ec
wined3d: Fix a typo.
2009-06-17 12:13:07 +02:00
Henri Verbeet
23231d5a62
wined3d: Add format conversions for some depth stencil formats.
...
Although these formats aren't lockable, we still explicitly set the initial
surface data when creating the texture. Unfortunately that means we'll need
the conversion functions, even though all they'll ever convert will be zeroes.
2009-06-16 13:37:06 +02:00
Henri Verbeet
fede35d1c5
wined3d: Introduce surface_calculate_size().
2009-06-15 13:42:28 +02:00
Henri Verbeet
5f581975dc
wined3d: Introduce surface_init() to handle most of the surface initialization.
2009-06-15 13:42:28 +02:00
Henri Verbeet
32613eb628
wined3d: Introduce surface_cleanup().
2009-06-15 13:42:28 +02:00
Henri Verbeet
669891c817
wined3d: Respect the "srgb" parameter to IWineD3DSurfaceImpl_BindTexture().
...
This is mostly for consistency, standalone surfaces can't be used for
texturing, so in practice "srgb" should always be FALSE in this path.
2009-06-12 17:33:15 +02:00
Henri Verbeet
8f67918f1d
wined3d: Use WINED3DFMT_FLAG_COMPRESSED instead of checking for specific formats.
2009-06-12 17:33:15 +02:00
Henri Verbeet
b052c6e8aa
wined3d: Remove some redundant s3tc extension checks.
...
If the extension isn't available to surface shouldn't have been created. We
don't do extension checks for all the other formats either.
2009-06-11 11:53:54 +02:00
Henri Verbeet
a25e63c62d
wined3d: Check the correct extensions in d3dfmt_get_conv().
...
According to Stefan these are either typos or leftovers from using GL_HILO8_NV.
2009-06-10 11:50:44 +02:00
Henri Verbeet
5ac8a7b054
wined3d: Set explicitly sized internal formats for color key conversion in d3dfmt_get_conv().
2009-06-10 11:50:31 +02:00
Henri Verbeet
910455e435
wined3d: Add some FIXMEs about blitting with unsupported fixups.
2009-06-09 17:01:14 +02:00
Henri Verbeet
08d95233e3
wined3d: Don't modify the internal format in d3dfmt_get_conv().
...
For most conversions the internal format is irrelevant. Color key conversions
are an exception, because they need to ensure an alpha channel is present.
2009-06-09 17:01:14 +02:00
Henri Verbeet
fb7531599f
wined3d: Only use stretch_rect_fbo() on surfaces that are FBO attachable.
2009-06-05 15:19:35 +02:00
Henri Verbeet
85107d81f4
wined3d: Remove some unnecessary forward declarations.
2009-05-25 11:23:32 +02:00
Henri Verbeet
b35e469d9d
wined3d: Document functions that depend on the caller to do GL locking.
2009-05-15 10:25:41 +02:00
Henri Verbeet
177d883d95
wined3d: Add missing GL locking to ffp_blit_set() and ffp_blit_unset().
2009-05-15 10:25:27 +02:00