Henri Verbeet
22d2d26ffc
wined3d: Make the device parameter to surface_blt_fbo() const.
2011-10-27 12:25:29 +02:00
Henri Verbeet
54dc38718b
wined3d: Make the device parameter to wined3d_surface_depth_blt_fbo() const.
2011-10-27 12:25:24 +02:00
Henri Verbeet
6a981239db
wined3d: Get rid of the unused palette9 wined3d_surface field.
2011-10-27 12:25:19 +02:00
Henri Verbeet
a42774f042
wined3d: Only check for sRGB attachability when needed in surface_load_texture().
2011-10-26 12:41:33 +02:00
Henri Verbeet
2da4f87a7e
wined3d: Upload directly from the source surface in wined3d_surface_blt(), if possible.
...
This avoids either loading sysmem surfaces into video memory (wasting GPU
memory) and then doing a blit on the GPU, or downloading GPU surfaces to
sysmem, doing a blit on the CPU, and likely uploading it again. This mostly
matters for ddraw and d3d8 applications, d3d9 already has to go through
wined3d_device_update_surface() to transfer data from sysmem surfaces to GPU
surfaces.
2011-10-25 16:57:23 +02:00
Henri Verbeet
e6101816a2
wined3d: Get rid of surface_gdi_cleanup().
...
It's effectively the same as surface_cleanup(). The GL objects that
surface_cleanup() destroys are never created for "GDI" surfaces.
2011-10-24 11:16:40 +02:00
Henri Verbeet
6e8273177a
wined3d: Reject multisampled readbacks in wined3d_surface_get_render_target_data().
2011-10-24 11:16:33 +02:00
Henri Verbeet
4229d865d2
wined3d: Only try to load surfaces from the drawable if the drawable is current in surface_load_sysmem().
2011-10-24 11:16:27 +02:00
Henri Verbeet
82f067f5cd
wined3d: Allow loading multisampled surfaces into sysmem.
2011-10-20 11:02:57 +02:00
Henri Verbeet
3042860478
wined3d: Detach any attached overlays on surface cleanup.
...
Spotted by Dan Kegel / Valgrind.
2011-10-19 12:23:47 +02:00
Henri Verbeet
68e1484bec
wined3d: Mark default pool surfaces lost when they're unloaded.
2011-10-18 15:10:13 +02:00
Henri Verbeet
ca43c49968
wined3d: Keep surfaces in sysmem if they're both already there in wined3d_surface_blt().
...
The idea is to avoid bouncing surfaces between the CPU and GPU when doing both
locks and blits on a surface. This is mostly an issue for ddraw applications.
2011-10-18 15:10:06 +02:00
Stefan Dösinger
496b438ede
wined3d: Remove d3d8/9 palette support.
2011-10-11 13:37:49 +02:00
Henri Verbeet
5609f062d2
wined3d: Dump the WINEDDBLTFX structure in wined3d_surface_blt().
2011-09-20 16:21:38 +02:00
Henri Verbeet
b9fcf71c71
ddraw: Use real flips.
2011-09-16 17:23:08 +02:00
Henri Verbeet
8009a4947b
wined3d: Flush after surface updates.
...
This is similar to 5d1d07abcf
. We need to flush
to ensure resource updates are visible in other contexts, since otherwise GL
doesn't make any ordering guarantees between contexts.
2011-09-15 15:41:40 +02:00
Henri Verbeet
bbb77cba74
wined3d: Add support for flipping compressed surfaces to surface_cpu_blt().
2011-09-09 13:33:33 +02:00
Henri Verbeet
5c57b53a6c
wined3d: Use the CPU blitter for blitting to converted surfaces.
2011-09-09 13:33:25 +02:00
Henri Verbeet
e82e1c2ac5
wined3d: Disable sRGB decoding in draw_textured_quad().
...
We're always supposed to draw the RGB texture here. sRGB decoding may be
enabled if sRGB decoding was enabled to last time the surface was used as a
texture, or if it was never used as a texture at all.
2011-09-09 13:33:22 +02:00
Gerald Pfeifer
0affcc3a7d
wined3d: Remove dead code (and variable) from wined3d_surface_flip. wined3d_surface_flip.
2011-09-08 20:08:06 +02:00
Henri Verbeet
19da825b12
wined3d: Use draw_binding for the surface_modify_location() call in surface_unmap() as well.
2011-09-08 11:11:10 +02:00
Henri Verbeet
79c438b2f2
wined3d: Implement wined3d_surface_flip() as a blit.
...
This allows us to actually take the "override" parameter into account. Plain
back -> front flips will be detected in wined3d_surface_flip() and will still
be handled by wined3d_swapchain_present().
2011-09-07 11:12:17 +02:00
Henri Verbeet
1b9bc1a950
wined3d: Try doing a present in wined3d_surface_blt() instead of IWineD3DSurfaceImpl_BltOverride().
2011-09-06 10:48:36 +02:00
Henri Verbeet
b86d69de16
wined3d: Don't override the swapchain present interval in IWineD3DSurfaceImpl_BltOverride().
2011-09-06 10:48:31 +02:00
Henri Verbeet
3346fc747c
wined3d: Get rid of the rect checks for present in IWineD3DSurfaceImpl_BltOverride().
2011-09-05 10:56:54 +02:00
Henri Verbeet
ca69a23d52
wined3d: Get rid of some redundant else statements in IWineD3DSurfaceImpl_BltOverride().
2011-09-02 10:09:01 +02:00
Henri Verbeet
179d6f8087
wined3d: Remove a redundant compare in IWineD3DSurfaceImpl_BltOverride().
...
If the source surface isn't on the destination swapchain it can't be a
backbuffer there either.
2011-09-02 10:08:57 +02:00
Henri Verbeet
cc10600b52
wined3d: Print a FIXME for any flags passed to wined3d_surface_flip().
2011-09-02 10:08:53 +02:00
Henri Verbeet
55ce85ad29
wined3d: Merge the wined3d_surface_flip() implementations.
2011-09-01 18:06:36 +02:00
Henri Verbeet
b587b85394
wined3d: Merge the wined3d_surface_set_mem() implementations.
2011-09-01 18:06:36 +02:00
Austin English
b2f7461a4d
wined3d: Remove an unused variable.
2011-09-01 18:06:36 +02:00
Henri Verbeet
dd462052c6
wined3d: Use the resource size for copying between a surface's DIB and PBO.
2011-08-31 12:07:57 +02:00
Matteo Bruni
0386b44bad
wined3d: Keep track of the current texture type for each texture unit.
2011-08-29 12:08:19 +02:00
Henri Verbeet
641f52ef96
wined3d: Add multisampling support.
2011-08-26 11:28:47 +02:00
Henri Verbeet
3b478afd10
wined3d: Get rid of the location fixup in surface_blt_fbo().
2011-08-26 11:27:50 +02:00
Henri Verbeet
eac640532d
wined3d: Get rid of the location fixup for ORM_FBO in surface_modify_location().
2011-08-26 11:27:46 +02:00
Henri Verbeet
68a5305dfd
wined3d: Get rid of the location fixup for ORM_FBO in surface_load_location().
2011-08-26 11:27:43 +02:00
Matteo Bruni
d485e04576
wined3d: Fetch currently active texture unit from the wined3d_context.
2011-08-25 11:31:55 +02:00
Matteo Bruni
f47f9f7c74
wined3d: Store currently active texture in the wined3d context.
2011-08-25 11:31:55 +02:00
Matteo Bruni
e53ae83d74
wined3d: Pass around the context instead of gl_info.
2011-08-25 11:31:55 +02:00
Matteo Bruni
be8ea9c36e
wined3d: Make context_acquire() unconditional in a bunch of places.
2011-08-25 11:31:55 +02:00
Henri Verbeet
6cdfb95c8e
wined3d: Use draw_binding in surface_unload().
2011-08-25 11:31:53 +02:00
Henri Verbeet
1d43f07239
wined3d: Use draw_binding in surface_realize_palette().
2011-08-25 11:31:53 +02:00
Henri Verbeet
683b52ed92
wined3d: Use draw_binding in surface_unmap().
2011-08-25 11:31:53 +02:00
Henri Verbeet
1ae498dc59
wined3d: Use draw_binding in IWineD3DSurfaceImpl_BltOverride().
2011-08-25 11:31:53 +02:00
Henri Verbeet
4673330cf4
wined3d: Use draw_binding in wined3d_surface_blt().
2011-08-24 11:58:15 +02:00
Henri Verbeet
e57b20c215
wined3d: Keep track of a surface's "draw location".
2011-08-24 11:58:14 +02:00
Henri Verbeet
f73593c572
wined3d: Set the current location to SFLAG_INTEXTURE instead of SFLAG_INDRAWABLE in wined3d_surface_depth_blt().
...
These currently end up being the same thing, but that will change soon.
2011-08-24 11:58:14 +02:00
Henri Verbeet
4b1ba0e02d
wined3d: Don't get rid of the user memory unless we're actually called with NULL in surface_set_mem().
...
In particular, some applications will call surface_set_mem() with the same
pointer to notify us the contents have changed.
2011-08-24 11:58:14 +02:00
Henri Verbeet
48911d7a1c
wined3d: Reject color blits on sysmem surfaces in ffp_blit_supported().
2011-08-23 16:53:51 +02:00
Henri Verbeet
f58e55ec6c
wined3d: Move arbfp based color blits from IWineD3DSurfaceImpl_BltOverride() to wined3d_surface_blt().
2011-08-23 16:53:51 +02:00
Henri Verbeet
a04f0e9c78
wined3d: Move FBO based color blits from IWineD3DSurfaceImpl_BltOverride() to wined3d_surface_blt().
2011-08-22 16:14:37 +02:00
Henri Verbeet
d063ff55e7
wined3d: Move surface_color_fill() based color fills from IWineD3DSurfaceImpl_BltOverride() to wined3d_surface_blt().
2011-08-22 16:14:37 +02:00
Henri Verbeet
a887128ffd
wined3d: Reject color fills on sysmem surfaces in ffp_blit_supported().
2011-08-22 16:14:36 +02:00
Henri Verbeet
18434ddc57
wined3d: Directly call surface_cpu_blt() in cpu_blit_color_fill().
...
And avoid a potential infinite recursion if wined3d_surface_blt() ends up
calling cpu_blit_color_fill().
2011-08-22 16:14:36 +02:00
Henri Verbeet
26484c9200
wined3d: Allow color fills on FBO attachable surfaces in ffp_blit_supported().
2011-08-22 16:14:36 +02:00
Henri Verbeet
e1ab5f6e6b
wined3d: Don't allow blits with an invalid destination rectangle when a clipper is set either.
...
Clippers don't really work. Previously we mostly didn't run into this because
the rectangle was already rejected by ddraw_surface7_Blt(), although
ddraw_surface7_BltFast() might have been affected in a couple of cases. We
should of course implement clippers, but until that happens, completely
rejecting the blit is better than introducing memory corruption.
This fixes a regression introduced by commit
92e616f355
.
2011-08-22 16:14:36 +02:00
Henri Verbeet
56428c6386
wined3d: Reuse convert_a8r8g8b8_x8r8g8b8() for B8G8R8X8 -> B8G8R8A8 conversions.
2011-08-22 16:14:36 +02:00
Henri Verbeet
156d24c634
wined3d: Add compressed surface support to surface_cpu_blt().
2011-08-22 16:14:36 +02:00
Henri Verbeet
a84275075d
wined3d: Implement wined3d_surface_bltfast() on top of wined3d_surface_blt().
2011-08-05 09:17:39 +02:00
Henri Verbeet
662de19ad3
wined3d: Move some flags handling from surface_cpu_blt() to wined3d_surface_blt().
2011-08-04 09:04:49 +02:00
Henri Verbeet
7e3ecd683c
wined3d: Move rectangle validation from surface_cpu_blt() to wined3d_surface_blt().
...
This fixes some tests because these were getting skipped for the BltOverride() path.
2011-08-04 09:04:39 +02:00
Henri Verbeet
b166cb29f8
wined3d: Remove src_rect and dst_rect NULL checks from surface_cpu_blt().
2011-08-04 09:04:25 +02:00
Henri Verbeet
e74d1358ac
wined3d: Remove the unused blit_op parameter to arbfp_blit_surface().
2011-08-04 09:04:20 +02:00
Henri Verbeet
41cff1618c
wined3d: Merge wined3d_surface_blt(), surface_blt() and gdi_surface_blt().
2011-08-03 09:23:30 +02:00
Henri Verbeet
c12627562b
wined3d: Go to the fallbacks for cross-swapchain blits.
2011-08-03 09:23:20 +02:00
Henri Verbeet
111e8fe77c
wined3d: Add WINED3DFMT_P8_UINT support to wined3d_format_convert_from_float().
2011-08-03 09:23:16 +02:00
Henri Verbeet
cf1c641cbb
wined3d: Fix switching color keying on / off.
2011-08-03 09:23:12 +02:00
Henri Verbeet
e4efcea223
wined3d: Set the read buffer to GL_NONE in surface_load_ds_location().
...
On GL implementations that don't support GL_ARB_ES2_compatibility the
framebuffer's read buffer has to be valid, even if we're not reading from it.
2011-08-03 09:23:08 +02:00
Henri Verbeet
98650e841e
wined3d: Go to the fallbacks if D3D is not initialized in surface_blt().
...
Even though this is the "OpenGL" surface implementation, this can still happen
in e.g. ddraw if no swapchain is created yet. That's something we should fix,
but not today.
2011-08-02 11:40:20 +02:00
Henri Verbeet
7539cc8faa
wined3d: Go straight to the fallbacks for complex blits in surface_blt().
...
At the moment this is only marginally useful, since it just avoids silly
things like color keyed depth fills that are probably invalid anyway. However,
the idea is to gradually move normal color fill and blit handling out of
IWineD3DSurfaceImpl_BltOverride() and surface_cpu_blt(), and eventually make
those functions go away completely.
2011-08-02 11:40:16 +02:00
Henri Verbeet
4bdd4ef45b
wined3d: Check for locked surfaces in wined3d_surface_blt().
2011-08-02 11:40:11 +02:00
Henri Verbeet
50d883c37e
wined3d: IWineD3DSurfaceImpl_BltOverride() is always passed valid source and destination rectangles.
...
So no need to call surface_get_rect() anymore.
2011-08-02 11:40:07 +02:00
Henri Verbeet
ace241ad59
wined3d: Resolve source and destination rectangles in wined3d_surface_blt().
2011-08-02 11:40:01 +02:00
Henri Verbeet
33fafc6166
wined3d: Get rid of context_bind_fbo() calls outside context.c.
2011-08-01 11:16:12 +02:00
Henri Verbeet
dcc969c32c
wined3d: Get rid of dst_fbo.
...
As a result we can get rid of a couple of other things as well.
2011-08-01 11:16:08 +02:00
Henri Verbeet
ccb3a51a44
wined3d: Just invalidate STATE_FRAMEBUFFER in surface_load_ds_location().
2011-08-01 11:16:03 +02:00
Henri Verbeet
2bf020e26f
wined3d: Only invalidate state for the current context in surface_blt_fbo().
2011-07-28 11:29:14 +02:00
Henri Verbeet
51c0f2a787
wined3d: Only invalidate state for the current context in wined3d_surface_depth_blt_fbo().
2011-07-27 11:51:53 +02:00
Henri Verbeet
c5f8a33a86
wined3d: Make the surface parameter to ffp_blit_p8_upload_palette() const.
2011-07-19 14:05:59 +02:00
Henri Verbeet
437cec1a49
wined3d: Make the surface parameter to surface_depth_blt() const.
2011-07-18 16:23:29 +02:00
Henri Verbeet
a97ed53460
wined3d: Make the surface parameter to surface_convert_color_to_float() const.
2011-07-18 16:23:29 +02:00
Henri Verbeet
d314aa2d6e
wined3d: Make the surface parameter to surface_convert_depth_to_float() const.
2011-07-18 16:23:29 +02:00
Henri Verbeet
416a55c7aa
wined3d: Make the surface parameter to surface_is_full_rect() const.
2011-07-18 16:23:29 +02:00
Henri Verbeet
db12216301
wined3d: Make the surface parameter to surface_get_rect() const.
2011-07-18 16:23:29 +02:00
Henri Verbeet
abfd6b479a
wined3d: Make the surface parameter to d3dfmt_p8_init_palette() const.
2011-07-11 11:53:32 +02:00
Henri Verbeet
3e9930f307
wined3d: Make the device parameter to primary_render_target_is_p8() const.
2011-07-11 11:53:28 +02:00
Henri Verbeet
a26c5f9b13
wined3d: Make the surface parameter to d3dfmt_get_conv() const.
2011-07-08 11:25:31 +02:00
Henri Verbeet
aa55404682
wined3d: Make the src_surface parameter to draw_textured_quad() const.
2011-07-08 11:25:28 +02:00
Henri Verbeet
0d18f5df0e
wined3d: Make the surface parameter to surface_upload_data() const.
2011-07-08 11:25:25 +02:00
Henri Verbeet
faebcc0236
wined3d: Make the surface parameter to surface_translate_drawable_coords() const.
2011-07-08 11:25:21 +02:00
Henri Verbeet
bb4b86f365
wined3d: Make the rt parameter to surface_set_compatible_renderbuffer() const.
2011-07-08 11:25:17 +02:00
Henri Verbeet
640234c504
wined3d: Rename "flag" to "location" in surface_modify_location().
2011-07-07 12:31:46 +02:00
Henri Verbeet
3ccf12a77c
wined3d: Rename "flag" to "location" in surface_load_location().
...
This makes much more sense.
2011-07-06 11:14:20 +02:00
Stefan Dösinger
053071e343
wined3d: Pass a struct wined3d_fb_state to device_clear_render_targets.
2011-07-05 17:33:51 +02:00
Stefan Dösinger
cd96c59d91
wined3d: Track framebuffer changes.
2011-07-05 17:33:43 +02:00
Henri Verbeet
4e8c7f00f2
wined3d: Print an ERR for unknown / invalid surface locations in surface_load_location().
2011-07-05 13:46:24 +02:00
Henri Verbeet
1c3b691f10
wined3d: Introduce a separate function for loading the SFLAG_INTEXTURE and SFLAG_INSRGBTEX surface locations.
2011-07-05 13:46:20 +02:00
Henri Verbeet
cabcb362c1
wined3d: Introduce a separate function for loading the SFLAG_INDRAWABLE surface location.
2011-07-05 13:46:15 +02:00
Henri Verbeet
aacd8f8b93
wined3d: Introduce a separate function for loading the SFLAG_INSYSMEM surface location.
2011-07-05 13:46:11 +02:00