2da4f87a7e
wined3d: Upload directly from the source surface in wined3d_surface_blt(), if possible.
...
This avoids either loading sysmem surfaces into video memory (wasting GPU
memory) and then doing a blit on the GPU, or downloading GPU surfaces to
sysmem, doing a blit on the CPU, and likely uploading it again. This mostly
matters for ddraw and d3d8 applications, d3d9 already has to go through
wined3d_device_update_surface() to transfer data from sysmem surfaces to GPU
surfaces.
2011-10-25 16:57:23 +02:00
e6101816a2
wined3d: Get rid of surface_gdi_cleanup().
...
It's effectively the same as surface_cleanup(). The GL objects that
surface_cleanup() destroys are never created for "GDI" surfaces.
2011-10-24 11:16:40 +02:00
6e8273177a
wined3d: Reject multisampled readbacks in wined3d_surface_get_render_target_data().
2011-10-24 11:16:33 +02:00
4229d865d2
wined3d: Only try to load surfaces from the drawable if the drawable is current in surface_load_sysmem().
2011-10-24 11:16:27 +02:00
82f067f5cd
wined3d: Allow loading multisampled surfaces into sysmem.
2011-10-20 11:02:57 +02:00
3042860478
wined3d: Detach any attached overlays on surface cleanup.
...
Spotted by Dan Kegel / Valgrind.
2011-10-19 12:23:47 +02:00
68e1484bec
wined3d: Mark default pool surfaces lost when they're unloaded.
2011-10-18 15:10:13 +02:00
ca43c49968
wined3d: Keep surfaces in sysmem if they're both already there in wined3d_surface_blt().
...
The idea is to avoid bouncing surfaces between the CPU and GPU when doing both
locks and blits on a surface. This is mostly an issue for ddraw applications.
2011-10-18 15:10:06 +02:00
496b438ede
wined3d: Remove d3d8/9 palette support.
2011-10-11 13:37:49 +02:00
5609f062d2
wined3d: Dump the WINEDDBLTFX structure in wined3d_surface_blt().
2011-09-20 16:21:38 +02:00
b9fcf71c71
ddraw: Use real flips.
2011-09-16 17:23:08 +02:00
8009a4947b
wined3d: Flush after surface updates.
...
This is similar to 5d1d07abcf
2011-09-15 15:41:40 +02:00
bbb77cba74
wined3d: Add support for flipping compressed surfaces to surface_cpu_blt().
2011-09-09 13:33:33 +02:00
5c57b53a6c
wined3d: Use the CPU blitter for blitting to converted surfaces.
2011-09-09 13:33:25 +02:00
e82e1c2ac5
wined3d: Disable sRGB decoding in draw_textured_quad().
...
We're always supposed to draw the RGB texture here. sRGB decoding may be
enabled if sRGB decoding was enabled to last time the surface was used as a
texture, or if it was never used as a texture at all.
2011-09-09 13:33:22 +02:00
0affcc3a7d
wined3d: Remove dead code (and variable) from wined3d_surface_flip. wined3d_surface_flip.
2011-09-08 20:08:06 +02:00
19da825b12
wined3d: Use draw_binding for the surface_modify_location() call in surface_unmap() as well.
2011-09-08 11:11:10 +02:00
79c438b2f2
wined3d: Implement wined3d_surface_flip() as a blit.
...
This allows us to actually take the "override" parameter into account. Plain
back -> front flips will be detected in wined3d_surface_flip() and will still
be handled by wined3d_swapchain_present().
2011-09-07 11:12:17 +02:00
1b9bc1a950
wined3d: Try doing a present in wined3d_surface_blt() instead of IWineD3DSurfaceImpl_BltOverride().
2011-09-06 10:48:36 +02:00
b86d69de16
wined3d: Don't override the swapchain present interval in IWineD3DSurfaceImpl_BltOverride().
2011-09-06 10:48:31 +02:00
3346fc747c
wined3d: Get rid of the rect checks for present in IWineD3DSurfaceImpl_BltOverride().
2011-09-05 10:56:54 +02:00
ca69a23d52
wined3d: Get rid of some redundant else statements in IWineD3DSurfaceImpl_BltOverride().
2011-09-02 10:09:01 +02:00
179d6f8087
wined3d: Remove a redundant compare in IWineD3DSurfaceImpl_BltOverride().
...
If the source surface isn't on the destination swapchain it can't be a
backbuffer there either.
2011-09-02 10:08:57 +02:00
cc10600b52
wined3d: Print a FIXME for any flags passed to wined3d_surface_flip().
2011-09-02 10:08:53 +02:00
55ce85ad29
wined3d: Merge the wined3d_surface_flip() implementations.
2011-09-01 18:06:36 +02:00
b587b85394
wined3d: Merge the wined3d_surface_set_mem() implementations.
2011-09-01 18:06:36 +02:00
b2f7461a4d
wined3d: Remove an unused variable.
2011-09-01 18:06:36 +02:00
dd462052c6
wined3d: Use the resource size for copying between a surface's DIB and PBO.
2011-08-31 12:07:57 +02:00
0386b44bad
wined3d: Keep track of the current texture type for each texture unit.
2011-08-29 12:08:19 +02:00
641f52ef96
wined3d: Add multisampling support.
2011-08-26 11:28:47 +02:00
3b478afd10
wined3d: Get rid of the location fixup in surface_blt_fbo().
2011-08-26 11:27:50 +02:00
eac640532d
wined3d: Get rid of the location fixup for ORM_FBO in surface_modify_location().
2011-08-26 11:27:46 +02:00
68a5305dfd
wined3d: Get rid of the location fixup for ORM_FBO in surface_load_location().
2011-08-26 11:27:43 +02:00
d485e04576
wined3d: Fetch currently active texture unit from the wined3d_context.
2011-08-25 11:31:55 +02:00
f47f9f7c74
wined3d: Store currently active texture in the wined3d context.
2011-08-25 11:31:55 +02:00
e53ae83d74
wined3d: Pass around the context instead of gl_info.
2011-08-25 11:31:55 +02:00
be8ea9c36e
wined3d: Make context_acquire() unconditional in a bunch of places.
2011-08-25 11:31:55 +02:00
6cdfb95c8e
wined3d: Use draw_binding in surface_unload().
2011-08-25 11:31:53 +02:00
1d43f07239
wined3d: Use draw_binding in surface_realize_palette().
2011-08-25 11:31:53 +02:00
683b52ed92
wined3d: Use draw_binding in surface_unmap().
2011-08-25 11:31:53 +02:00
1ae498dc59
wined3d: Use draw_binding in IWineD3DSurfaceImpl_BltOverride().
2011-08-25 11:31:53 +02:00
4673330cf4
wined3d: Use draw_binding in wined3d_surface_blt().
2011-08-24 11:58:15 +02:00
e57b20c215
wined3d: Keep track of a surface's "draw location".
2011-08-24 11:58:14 +02:00
f73593c572
wined3d: Set the current location to SFLAG_INTEXTURE instead of SFLAG_INDRAWABLE in wined3d_surface_depth_blt().
...
These currently end up being the same thing, but that will change soon.
2011-08-24 11:58:14 +02:00
4b1ba0e02d
wined3d: Don't get rid of the user memory unless we're actually called with NULL in surface_set_mem().
...
In particular, some applications will call surface_set_mem() with the same
pointer to notify us the contents have changed.
2011-08-24 11:58:14 +02:00
48911d7a1c
wined3d: Reject color blits on sysmem surfaces in ffp_blit_supported().
2011-08-23 16:53:51 +02:00
f58e55ec6c
wined3d: Move arbfp based color blits from IWineD3DSurfaceImpl_BltOverride() to wined3d_surface_blt().
2011-08-23 16:53:51 +02:00
a04f0e9c78
wined3d: Move FBO based color blits from IWineD3DSurfaceImpl_BltOverride() to wined3d_surface_blt().
2011-08-22 16:14:37 +02:00
d063ff55e7
wined3d: Move surface_color_fill() based color fills from IWineD3DSurfaceImpl_BltOverride() to wined3d_surface_blt().
2011-08-22 16:14:37 +02:00
a887128ffd
wined3d: Reject color fills on sysmem surfaces in ffp_blit_supported().
2011-08-22 16:14:36 +02:00
18434ddc57
wined3d: Directly call surface_cpu_blt() in cpu_blit_color_fill().
...
And avoid a potential infinite recursion if wined3d_surface_blt() ends up
calling cpu_blit_color_fill().
2011-08-22 16:14:36 +02:00
26484c9200
wined3d: Allow color fills on FBO attachable surfaces in ffp_blit_supported().
2011-08-22 16:14:36 +02:00
e1ab5f6e6b
wined3d: Don't allow blits with an invalid destination rectangle when a clipper is set either.
...
Clippers don't really work. Previously we mostly didn't run into this because
the rectangle was already rejected by ddraw_surface7_Blt(), although
ddraw_surface7_BltFast() might have been affected in a couple of cases. We
should of course implement clippers, but until that happens, completely
rejecting the blit is better than introducing memory corruption.
This fixes a regression introduced by commit
92e616f355
2011-08-22 16:14:36 +02:00
56428c6386
wined3d: Reuse convert_a8r8g8b8_x8r8g8b8() for B8G8R8X8 -> B8G8R8A8 conversions.
2011-08-22 16:14:36 +02:00
156d24c634
wined3d: Add compressed surface support to surface_cpu_blt().
2011-08-22 16:14:36 +02:00
a84275075d
wined3d: Implement wined3d_surface_bltfast() on top of wined3d_surface_blt().
2011-08-05 09:17:39 +02:00
662de19ad3
wined3d: Move some flags handling from surface_cpu_blt() to wined3d_surface_blt().
2011-08-04 09:04:49 +02:00
7e3ecd683c
wined3d: Move rectangle validation from surface_cpu_blt() to wined3d_surface_blt().
...
This fixes some tests because these were getting skipped for the BltOverride() path.
2011-08-04 09:04:39 +02:00
b166cb29f8
wined3d: Remove src_rect and dst_rect NULL checks from surface_cpu_blt().
2011-08-04 09:04:25 +02:00
e74d1358ac
wined3d: Remove the unused blit_op parameter to arbfp_blit_surface().
2011-08-04 09:04:20 +02:00
41cff1618c
wined3d: Merge wined3d_surface_blt(), surface_blt() and gdi_surface_blt().
2011-08-03 09:23:30 +02:00
c12627562b
wined3d: Go to the fallbacks for cross-swapchain blits.
2011-08-03 09:23:20 +02:00
111e8fe77c
wined3d: Add WINED3DFMT_P8_UINT support to wined3d_format_convert_from_float().
2011-08-03 09:23:16 +02:00
cf1c641cbb
wined3d: Fix switching color keying on / off.
2011-08-03 09:23:12 +02:00
e4efcea223
wined3d: Set the read buffer to GL_NONE in surface_load_ds_location().
...
On GL implementations that don't support GL_ARB_ES2_compatibility the
framebuffer's read buffer has to be valid, even if we're not reading from it.
2011-08-03 09:23:08 +02:00
98650e841e
wined3d: Go to the fallbacks if D3D is not initialized in surface_blt().
...
Even though this is the "OpenGL" surface implementation, this can still happen
in e.g. ddraw if no swapchain is created yet. That's something we should fix,
but not today.
2011-08-02 11:40:20 +02:00
7539cc8faa
wined3d: Go straight to the fallbacks for complex blits in surface_blt().
...
At the moment this is only marginally useful, since it just avoids silly
things like color keyed depth fills that are probably invalid anyway. However,
the idea is to gradually move normal color fill and blit handling out of
IWineD3DSurfaceImpl_BltOverride() and surface_cpu_blt(), and eventually make
those functions go away completely.
2011-08-02 11:40:16 +02:00
4bdd4ef45b
wined3d: Check for locked surfaces in wined3d_surface_blt().
2011-08-02 11:40:11 +02:00
50d883c37e
wined3d: IWineD3DSurfaceImpl_BltOverride() is always passed valid source and destination rectangles.
...
So no need to call surface_get_rect() anymore.
2011-08-02 11:40:07 +02:00
ace241ad59
wined3d: Resolve source and destination rectangles in wined3d_surface_blt().
2011-08-02 11:40:01 +02:00
33fafc6166
wined3d: Get rid of context_bind_fbo() calls outside context.c.
2011-08-01 11:16:12 +02:00
dcc969c32c
wined3d: Get rid of dst_fbo.
...
As a result we can get rid of a couple of other things as well.
2011-08-01 11:16:08 +02:00
ccb3a51a44
wined3d: Just invalidate STATE_FRAMEBUFFER in surface_load_ds_location().
2011-08-01 11:16:03 +02:00
2bf020e26f
wined3d: Only invalidate state for the current context in surface_blt_fbo().
2011-07-28 11:29:14 +02:00
51c0f2a787
wined3d: Only invalidate state for the current context in wined3d_surface_depth_blt_fbo().
2011-07-27 11:51:53 +02:00
c5f8a33a86
wined3d: Make the surface parameter to ffp_blit_p8_upload_palette() const.
2011-07-19 14:05:59 +02:00
437cec1a49
wined3d: Make the surface parameter to surface_depth_blt() const.
2011-07-18 16:23:29 +02:00
a97ed53460
wined3d: Make the surface parameter to surface_convert_color_to_float() const.
2011-07-18 16:23:29 +02:00
d314aa2d6e
wined3d: Make the surface parameter to surface_convert_depth_to_float() const.
2011-07-18 16:23:29 +02:00
416a55c7aa
wined3d: Make the surface parameter to surface_is_full_rect() const.
2011-07-18 16:23:29 +02:00
db12216301
wined3d: Make the surface parameter to surface_get_rect() const.
2011-07-18 16:23:29 +02:00
abfd6b479a
wined3d: Make the surface parameter to d3dfmt_p8_init_palette() const.
2011-07-11 11:53:32 +02:00
3e9930f307
wined3d: Make the device parameter to primary_render_target_is_p8() const.
2011-07-11 11:53:28 +02:00
a26c5f9b13
wined3d: Make the surface parameter to d3dfmt_get_conv() const.
2011-07-08 11:25:31 +02:00
aa55404682
wined3d: Make the src_surface parameter to draw_textured_quad() const.
2011-07-08 11:25:28 +02:00
0d18f5df0e
wined3d: Make the surface parameter to surface_upload_data() const.
2011-07-08 11:25:25 +02:00
faebcc0236
wined3d: Make the surface parameter to surface_translate_drawable_coords() const.
2011-07-08 11:25:21 +02:00
bb4b86f365
wined3d: Make the rt parameter to surface_set_compatible_renderbuffer() const.
2011-07-08 11:25:17 +02:00
640234c504
wined3d: Rename "flag" to "location" in surface_modify_location().
2011-07-07 12:31:46 +02:00
3ccf12a77c
wined3d: Rename "flag" to "location" in surface_load_location().
...
This makes much more sense.
2011-07-06 11:14:20 +02:00
053071e343
wined3d: Pass a struct wined3d_fb_state to device_clear_render_targets.
2011-07-05 17:33:51 +02:00
cd96c59d91
wined3d: Track framebuffer changes.
2011-07-05 17:33:43 +02:00
4e8c7f00f2
wined3d: Print an ERR for unknown / invalid surface locations in surface_load_location().
2011-07-05 13:46:24 +02:00
1c3b691f10
wined3d: Introduce a separate function for loading the SFLAG_INTEXTURE and SFLAG_INSRGBTEX surface locations.
2011-07-05 13:46:20 +02:00
cabcb362c1
wined3d: Introduce a separate function for loading the SFLAG_INDRAWABLE surface location.
2011-07-05 13:46:15 +02:00
aacd8f8b93
wined3d: Introduce a separate function for loading the SFLAG_INSYSMEM surface location.
2011-07-05 13:46:11 +02:00
b1664a2c85
wined3d: Get rid of some IWineD3D* references.
2011-07-04 13:44:41 +02:00
c461d312ba
wined3d: Request per-surface palettes in the client libs.
2011-06-24 08:49:48 -05:00
fd8dbf0847
wined3d: Make the surface parameter to surface_get_gl_buffer() const.
2011-06-24 08:49:34 -05:00
0ce282edf7
wined3d: Make the surface parameter to surface_is_offscreen() const.
2011-06-24 08:49:28 -05:00
Henri Verbeet