027fdb31c2
wined3d: Rename the IWineD3DSurfaceImpl "Flags" field to "flags".
2010-11-12 15:43:07 +01:00
a59ee29dec
wined3d: Simplify a condition in IWineD3DSurfaceImpl_LoadTexture().
2010-11-12 15:43:07 +01:00
4bd1f04fbd
wined3d: Check for depth/stencil surfaces in general in IWineD3DSurfaceImpl_Unmap().
...
Instead of just the current one.
2010-11-12 15:43:07 +01:00
db013ed213
wined3d: Avoid marking samplers dirty in IWineD3DSurfaceImpl_Unmap().
...
Resources are explicitly loaded in context_apply_draw_state() when needed, the
resource location management takes care of all of this.
2010-11-12 15:43:07 +01:00
3bbe658ef1
wined3d: Remove some useless code.
2010-11-11 13:11:37 +01:00
78abb8ae07
wined3d: Simply use surface_modify_location() in IWineD3DSurfaceImpl_Map() with WINED3DLOCK_DISCARD.
...
The call to surface_add_dirty_rect() would have taken care of evicting the
other locations anyway, but we really shouldn't be touching the location flags
directly.
2010-11-11 13:11:34 +01:00
d3fd7b247b
wined3d: Handle rendertargetlock_mode in surface_load_location().
2010-11-11 13:11:30 +01:00
8e059205ba
wined3d: Translate drawable coordinates in flush_to_framebuffer_drawpixels().
2010-11-02 13:17:35 +01:00
3f0d16c5bf
wined3d: Do not use "lockedRect" unless the surface is locked in flush_to_framebuffer_drawpixels().
2010-11-02 13:17:31 +01:00
e35b6aa1a7
wined3d: Change surface_translate_frontbuffer_coords() to handle all drawable coordinates.
2010-11-01 13:34:43 +01:00
27bf4c3747
wined3d: Remove some redundant state save/restore code from flush_to_framebuffer_drawpixels().
2010-10-29 14:33:57 +02:00
7414ebc975
wined3d: Don't flip the coordinate system in set_blit_dimension().
2010-10-29 14:33:57 +02:00
2b58f80c27
wined3d: Use surface_blt_to_drawable() in IWineD3DSurfaceImpl_BltOverride().
2010-10-21 16:15:31 +02:00
574169174e
wined3d: Check if we can do the blit before messing with surface flags in IWineD3DSurfaceImpl_BltOverride().
...
As an added benefit blit_supported() will now get the rectangles in the
correct coordinate system.
2010-10-21 16:15:25 +02:00
1237e8065e
wined3d: Properly flip in surface_blt_to_drawable().
...
We want to flip the coordinate system, not just the rectangle.
2010-10-19 13:50:13 +02:00
8a96a8cc1f
wined3d: Always pass a valid rectangle to surface_get_blt_info().
2010-10-19 13:50:09 +02:00
ca381b610c
wined3d: Allow FBO blits again between surfaces with fixups if they have the same format.
...
For some reason f1ca14cb5b
2010-10-19 13:50:01 +02:00
1fa3365832
wined3d: Flip destination coordinates when blitting to an offscreen target in BltOverride().
2010-10-15 16:19:50 +02:00
95469309d6
wined3d: Consistently use Map/Unmap for mapping resources.
2010-10-14 17:54:52 +02:00
b68d257710
wined3d: Get rid of redundant comparisons against NULL / 0.
2010-09-14 09:43:33 -05:00
8fbf23f0cc
wined3d: Don't overwrite the offscreen depth/stencil surface with undefined data in surface_load_ds_location().
2010-09-06 16:14:26 +02:00
8e0cb60b09
wined3d: Do not call device_switch_onscreen_ds() while under the GL lock.
2010-09-06 16:14:18 +02:00
bc2db78c3a
wined3d: Explicitly document some more consequences of GL locking policy.
...
The basic rule is that you can't call anything that takes the user32 / gdi32
lock while under the GL (winex11) lock. As a consequence, you can't call
anything like context_acquire() or context_destroy() either.
2010-09-03 11:05:10 +02:00
6c4c351791
wined3d: Don't require wined3d object parents to be COM objects.
2010-09-01 14:01:02 +02:00
3a7f08a56f
wined3d: Rename wined3d_format_desc to wined3d_format.
2010-08-31 14:23:47 +02:00
4005eb2a18
wined3d: Get rid of WINED3DRECT.
2010-08-31 14:23:47 +02:00
1bf25cfe3f
wined3d: Use debug_surflocation() in surface_load_location().
2010-08-31 14:23:46 +02:00
c689280beb
wined3d: Use surface_color_fill() in IWineD3DDeviceImpl_ColorFill().
2010-08-30 11:26:45 +02:00
ecc67757ab
wined3d: Introduce surface_color_fill().
...
This is also a first attempt at a more structured interface to blitter
operations.
2010-08-30 11:26:45 +02:00
b233e7b301
wined3d: Rename the "format" field in wined3d_format_desc to "id".
2010-08-26 12:41:44 +02:00
42b814c7d1
wined3d: Remove the GetContainer() methods from the public wined3d interface.
...
There's nothing left that uses these.
2010-08-26 12:41:39 +02:00
22428d97e1
wined3d: Don't set a NULL container of type WINED3D_CONTAINER_TEXTURE.
...
Any container type other than WINED3D_CONTAINER_NONE implies a valid pointer
of the specified type. This fixes a regression introduced by
368e5eb87a
2010-08-26 12:41:34 +02:00
87e12b8b6a
wined3d: Introduce a local variable for gl_info in IWineD3DSurfaceImpl_BltOverride().
2010-08-25 11:57:12 +02:00
cc5271d1b7
wined3d: Rename WINED3DFORMAT to wined3d_format_id.
2010-08-24 12:25:01 +02:00
50b5955288
wined3d: Use floating point colors in the blitter's color_fill functions.
2010-08-24 12:24:39 +02:00
9956ea7044
wined3d: Convert from floating point to specific surface formats.
...
Instead of from WINED3DFMT_B8G8R8A8_UNORM.
2010-08-24 12:24:33 +02:00
a455a918c1
wined3d: Explicitly pass the draw rect to device_clear_render_targets().
...
For regular clears this is the intersection of the viewport and scissor
rectangles, but color fills shouldn't be affected by those.
2010-08-24 12:24:28 +02:00
b93a9b37fa
wined3d: Pass a WINED3DCOLORVALUE structure to IWineD3DDeviceImpl_ClearRendertargetView().
...
The structure is nicer to work with than the array.
2010-08-23 12:05:24 +02:00
910d3022c3
wined3d: Do not release a reference we do not have in IWineD3DSurfaceImpl_Flip().
...
This fixes a regression introduced by 368e5eb87a
2010-08-20 14:11:10 +02:00
f06b22a537
wined3d: Add a TRACE to IWineD3DSurfaceImpl_LoadTexture().
2010-08-18 09:39:42 +02:00
368e5eb87a
wined3d: Avoid IWineD3DSurface_GetContainer().
2010-08-17 11:55:32 +02:00
8292c687d8
wined3d: Get rid of the now redundant SFLAG_SWAPCHAIN surface flag.
2010-08-17 11:55:32 +02:00
0b24db5db5
wined3d: Also store the subresource container type.
2010-08-17 11:55:32 +02:00
61db577a4b
wined3d: Remove SetContainer() from the public IWineD3DSurface interface.
2010-08-17 11:55:32 +02:00
a16cf58494
wined3d: Fix a couple of typos.
2010-08-16 13:47:53 +02:00
d494dfb6c0
wined3d: Rename surface_calculate_size() to wined3d_format_calculate_size().
2010-08-16 13:47:42 +02:00
3a36013065
wined3d: Print the correct resource location in surface_set_texture_name().
2010-08-16 13:47:33 +02:00
e1188b0c8e
wined3d: Fix some misspellings of "surface".
2010-08-16 13:47:17 +02:00
5f2fcfdd6b
wined3d: Reattach FBO attachments when any of the corresponding surfaces is unloaded.
2010-08-16 13:47:08 +02:00
2b88b2d351
wined3d: Only try to acquire a context in surface_cleanup() if there are GL resources to be destroyed.
...
The reason we're in surface_cleanup() might for example be that context
creation failed.
2010-08-04 13:24:21 +02:00
88ff3f406d
wined3d: Always set the get_drawable_size() surface function.
2010-08-03 11:06:47 +02:00
b2e1e1fd71
wined3d: Pass the color as floating point values to device_clear_render_targets().
2010-08-03 11:06:42 +02:00
6e68dd52c4
wined3d: Use the correct divider for 15-bit depth formats in IWineD3DSurfaceImpl_BltZ().
2010-08-03 11:06:20 +02:00
6874743e78
wined3d: Add a missing return statement to surface_prepare_texture().
...
Calling surface_prepare_texture_internal() twice on the same surface is
harmless, but unnecessary.
2010-07-26 18:38:31 +02:00
0bf68b846a
wined3d: Merge strect_rect_fbo() and surface_load_srgb_fbo().
2010-07-26 18:38:31 +02:00
943fb2fb57
wined3d: Do RGB <=> sRGB transfers using FBO blits.
...
Concept based on a patch by Stefan.
2010-07-26 18:38:31 +02:00
d374d85055
wined3d: Clear all render targets in an MRT setup.
2010-07-23 11:46:47 +02:00
f7760656f3
wined3d: Remove LoadLocation() from the public wined3d surface interface.
2010-07-22 10:13:24 +02:00
147f24dd78
wined3d: Remove ModifyLocation() from the public wined3d surface interface.
2010-07-22 10:13:13 +02:00
c411b45da9
wined3d: Use a more consistent name for the normalized texrect "extension".
2010-07-21 09:33:18 +02:00
4b850ed121
wined3d: Remove restoring the read buffer from read_from_framebuffer_texture().
...
The few functions that care about the read buffer should explicitly set it
themselves, instead of assuming any particular state.
2010-07-20 13:13:04 +02:00
7649c75b40
Assorted typo and spelling fixes.
2010-06-24 10:37:05 +02:00
b769c912cc
wined3d: read_from_framebuffer_texture() isn't suitable for readback of onscreen surfaces.
2010-06-22 13:51:30 +02:00
6585bec5ac
wined3d: Check for error conditions in GL call.
2010-06-22 11:22:38 +02:00
1b5cc39a86
wined3d: Get rid of some dead code.
2010-06-01 11:03:56 +02:00
ba09e7a2a1
wined3d: Don't use blit_supported() in d3dfmt_get_conv for now.
2010-05-27 14:46:43 +02:00
e54f06183c
wined3d: Replace set_shader call with unset_shader in blt_to_drawable.
...
The blit_shader is activated before draw_textured_quad, so after use
it should be deactivated instead of being activated again.
2010-05-27 14:46:43 +02:00
e8ac9bbd7f
wined3d: Get rid of GLINFO_LOCATION.
2010-05-25 13:29:00 +02:00
db0784e1da
wined3d: Introduce a separate function for translating front buffer coordinates to GL coordinates.
2010-05-21 14:37:52 +02:00
a2a58a21d8
wined3d: Translate front buffer coordinates in surface_blt_to_drawable().
2010-05-20 13:47:53 +02:00
f0888577c5
wined3d: Use wine_dbgstr_rect() for tracing the rectangle in IWineD3DSurfaceImpl_LockRect().
2010-05-19 16:57:59 +02:00
f892003194
wined3d: Set conversion flags for format descriptors having a convert function.
2010-05-17 14:43:49 +02:00
79145e215b
wined3d: Add support for shadow samplers.
2010-05-17 13:19:53 +02:00
44ab3d70f1
wined3d: Handle depth/stencil surfaces in IWineD3DSurfaceImpl_LoadLocation().
2010-05-17 13:19:40 +02:00
b60961ae55
wined3d: Use surface_prepare_texture for surface allocation in read_from_framebuffer_texture.
2010-05-11 11:04:55 +02:00
49e076eabd
wined3d: Separate context acquisition and state application.
2010-05-04 13:14:59 +02:00
f09b8e454d
wined3d: Avoid some needless depth buffer copies.
...
If an application switches between render targets of a different size, but
with the same depth/stencil surface it'll typically clear the depth/stencil
surface before drawing. However, in case of the smaller render target that
wouldn't be a full clear, so we'd have to do a depth copy if we also switched
between onscreen and offscreen rendering. Keeping track of which part of the
depth/stencil surface is current for onscreen/offscreen allows us to avoid
most of these kinds of copies. The current scheme requires the current/dirty
rectangle to have an origin at (0,0). This could be extended to an arbitrary
rectangle, but the bookkeeping becomes somewhat more complex in that case, and
it's not clear that there would be much of a benefit at this point.
2010-04-29 10:19:39 -05:00
83cf1ce8e1
wined3d: Check if the depth/stencil surface has any valid location at the start of surface_load_ds_location().
2010-04-28 07:32:05 -05:00
0d86323778
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_release_client_storage().
2010-04-28 07:31:28 -05:00
23a377f02b
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_init_sysmem().
2010-04-28 07:31:13 -05:00
42375518ba
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_add_dirty_rect().
2010-04-27 12:02:39 -05:00
f78d85ffe1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_texture_target().
2010-04-27 12:02:31 -05:00
294d9dae8f
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_texture_name().
2010-04-27 12:02:24 -05:00
d977e91b11
wined3d: Store back buffer surfaces as IWineD3DSurfaceImpl pointers in the swapchain.
2010-04-27 12:02:14 -05:00
62acb2fdbc
wined3d: Store the front buffer surface as an IWineD3DSurfaceImpl pointer in the swapchain.
2010-04-27 12:01:59 -05:00
32b1f25f4b
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_force_reload().
2010-04-26 09:04:56 -05:00
553f429964
wined3d: Simply pass IWineD3DSurfaceImpl pointers to IWineD3DSurfaceImpl_BltOverride().
2010-04-26 09:04:48 -05:00
d1ea48b971
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_internal_preload().
2010-04-26 09:04:35 -05:00
bea50a39de
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to fb_copy_to_texture_hwstretch().
2010-04-25 07:28:18 -05:00
99994f885c
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to fb_copy_to_texture_direct().
2010-04-25 07:28:07 -05:00
9308c5499f
wined3d: Make sure all texture levels are allocated in surface_prepare_texture().
...
This fixes a regression introduced by commit
af7dfcd378
2010-04-25 07:27:36 -05:00
6b34b8e6d1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_acquire().
2010-04-22 11:28:17 +02:00
660ad06692
wined3d: Simply pass implementation pointers to stretch_rect_fbo().
2010-04-21 11:57:32 +02:00
79a014a505
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_get_gl_buffer().
2010-04-21 11:57:32 +02:00
c5de1e1045
wined3d: Store the depth/stencil surface as an IWineD3DSurfaceImpl pointer in the device.
2010-04-20 11:14:42 +02:00
c7a1848656
wined3d: Store render targets as IWineD3DSurfaceImpl pointers in the device.
2010-04-20 11:14:30 +02:00
92a44884c7
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_compatible_renderbuffer().
2010-04-19 14:55:35 +02:00
03dc612c9c
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_is_offscreen().
2010-04-19 14:55:31 +02:00
efb3993a3a
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_modify_ds_location().
2010-04-19 14:55:24 +02:00
ae46589f53
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_load_ds_location().
2010-04-19 14:55:19 +02:00
Henri Verbeet