3fd66bc650
wined3d: Make some lookup tables const.
2010-08-23 12:04:36 +02:00
8292c687d8
wined3d: Get rid of the now redundant SFLAG_SWAPCHAIN surface flag.
2010-08-17 11:55:32 +02:00
0b24db5db5
wined3d: Also store the subresource container type.
2010-08-17 11:55:32 +02:00
61db577a4b
wined3d: Remove SetContainer() from the public IWineD3DSurface interface.
2010-08-17 11:55:32 +02:00
20f51c29a9
wined3d: Setup target if offscreen rendering setting changed.
2010-07-26 18:38:33 +02:00
943fb2fb57
wined3d: Do RGB <=> sRGB transfers using FBO blits.
...
Concept based on a patch by Stefan.
2010-07-26 18:38:31 +02:00
3d8ff7f27a
wined3d: Framebuffer blits are affected by the color mask.
2010-07-22 10:13:36 +02:00
f7760656f3
wined3d: Remove LoadLocation() from the public wined3d surface interface.
2010-07-22 10:13:24 +02:00
147f24dd78
wined3d: Remove ModifyLocation() from the public wined3d surface interface.
2010-07-22 10:13:13 +02:00
1b5cc39a86
wined3d: Get rid of some dead code.
2010-06-01 11:03:56 +02:00
f99e1d80e2
wined3d: Fix size of buffer in swapchain_create_context_for_thread().
2010-05-31 12:46:08 +02:00
e8ac9bbd7f
wined3d: Get rid of GLINFO_LOCATION.
2010-05-25 13:29:00 +02:00
bcc4603125
wined3d: Set the swapchain.c GLINFO_LOCATION to *gl_info.
2010-05-24 11:31:25 +02:00
7bec8e1dcb
wined3d: Correctly translate between coordinate systems in swapchain_blit().
2010-05-18 18:42:09 +02:00
7a2debe113
wined3d: Use the FBO cache in swapchain_blit().
2010-05-06 14:17:30 +02:00
ec3d2ba316
wined3d: Fall back to other depth stencil formats if D24S8 isn't supported.
2010-05-04 13:15:00 +02:00
49e076eabd
wined3d: Separate context acquisition and state application.
2010-05-04 13:14:59 +02:00
f09b8e454d
wined3d: Avoid some needless depth buffer copies.
...
If an application switches between render targets of a different size, but
with the same depth/stencil surface it'll typically clear the depth/stencil
surface before drawing. However, in case of the smaller render target that
wouldn't be a full clear, so we'd have to do a depth copy if we also switched
between onscreen and offscreen rendering. Keeping track of which part of the
depth/stencil surface is current for onscreen/offscreen allows us to avoid
most of these kinds of copies. The current scheme requires the current/dirty
rectangle to have an origin at (0,0). This could be extended to an arbitrary
rectangle, but the bookkeeping becomes somewhat more complex in that case, and
it's not clear that there would be much of a benefit at this point.
2010-04-29 10:19:39 -05:00
d977e91b11
wined3d: Store back buffer surfaces as IWineD3DSurfaceImpl pointers in the swapchain.
2010-04-27 12:02:14 -05:00
62acb2fdbc
wined3d: Store the front buffer surface as an IWineD3DSurfaceImpl pointer in the swapchain.
2010-04-27 12:01:59 -05:00
6b34b8e6d1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_acquire().
2010-04-22 11:28:17 +02:00
1c403e44b5
wined3d: Store the current render target as an IWineD3DSurfaceImpl pointer in the context.
2010-04-22 11:28:12 +02:00
7b47dabd09
wined3d: Avoid some unnecessary invalidations of the the onscreen depth buffer.
...
This can happen for example when the application switches to a different
depth/stencil for offscreen rendering and back again.
2010-04-21 11:57:32 +02:00
c5de1e1045
wined3d: Store the depth/stencil surface as an IWineD3DSurfaceImpl pointer in the device.
2010-04-20 11:14:42 +02:00
520f74de21
wined3d: Store the auto depth/stencil surface as an IWineD3DSurfaceImpl pointer in the device.
2010-04-20 11:14:35 +02:00
efb3993a3a
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_modify_ds_location().
2010-04-19 14:55:24 +02:00
95130a7d5e
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_attach_surface_fbo().
2010-04-16 12:09:36 +02:00
65797d7f75
wined3d: Get rid of glRect from IWineD3DSurfaceImpl.
...
604caf0caa
2010-04-16 12:09:14 +02:00
3b6aea5934
wined3d: Move palette uploading code over to arbfp blit_shader.
2010-04-06 13:53:15 +02:00
dc918d4394
wined3d: Use FBOs when the onscreen depth stencil format isn't suitable.
...
This allows proper support of float depth buffers when rendering to onscreen surfaces.
2010-03-31 16:12:32 +02:00
19b6f5ca75
wined3d: Control the onscreen depth stencil format in the swapchain.
...
This allows the swapchain to know what depth format its window contexts have to see if the
requested depth format is compatible or a FBO fallback is needed, and it will be needed to
set the onscreen format to the requested auto depth stencil format instead of the
let's-hope-it-fits D24_UNORM_S8_UINT format.
2010-03-31 16:12:31 +02:00
3aaa6ee6e7
wined3d: Rename GlPixelFormatDesc to wined3d_format_desc.
2010-03-19 14:31:47 +01:00
7c930589bc
wined3d: Avoid some common invalid context accesses.
...
Unfortunately there are plenty of other places left. Perhaps we should
consider creating our own window when the context becomes invalid and making
the context current on that instead.
2010-03-18 10:25:09 +01:00
570f865bad
wined3d: Don't use framebuffer blit for backbuffer formats with fixups in swapchain_blit().
2010-03-17 10:06:06 +01:00
60e98cc3ad
wined3d: Don't use filtering on textures that need complex fixups in swapchain_blit().
...
For example, interpolating palette indices doesn't have the desired result.
Should we really want filtering for these cases we could implement it inside
the relevant shaders, after the fixup, but I doubt it's worth the effort.
2010-03-17 10:06:03 +01:00
c48adfe201
wined3d: Use "gl_filter" in the non-FBO path of swapchain_blit() as well.
2010-03-17 10:05:59 +01:00
78166b0b23
wined3d: Implement SetDestWindowOverride() by simply making the context current on a different window.
2010-03-16 11:45:15 +01:00
cd9a8b74b9
wined3d: Store the device window in the swapchain.
...
The swapchain's current window might be changed by SetDestWindowOverride().
2010-03-16 11:45:11 +01:00
18ec2525a4
wined3d: Store the swapchain instead of the surface in the context.
2010-03-16 11:44:44 +01:00
8a107bc63a
wined3d: Kill pbuffer offscreen rendering support.
...
Our pbuffer support is broken, nobody cares.
2010-03-15 15:55:38 +01:00
ba8e6f713b
wined3d: Use the HDC from the acquired context to call SwapBuffer().
...
These should be the same, but this way the relation is clearer.
2010-02-05 10:06:21 +01:00
d0afc7567b
wined3d: Call SetDestWindowOverride() before acquiring a context.
2010-02-05 10:06:17 +01:00
daf0aeb34a
wined3d: Make sure all contexts are finished drawing before calling SwapBuffers().
...
This causes a small performance hit when multiple GL contexts are used. As an
optimization we could use ARB_sync to only wait for the last draw call instead
of all GL commands.
2010-01-28 11:08:07 +01:00
ee1f2c4654
wined3d: Don't leak the context array in the swapchain_init() error path.
2010-01-20 15:29:57 +01:00
ce2c3ea6c7
wined3d: Handle source and destination rectangles in IWineD3DSwapChainImpl_Present().
2010-01-04 11:41:29 +01:00
b5907e23cc
wined3d: Add support for source and destination rectangles to swapchain_blit().
2010-01-04 11:41:29 +01:00
7160e56ab1
wined3d: Properly check for glBlitFramebuffer().
...
ARB_framebuffer_object can also provide this entry point.
2009-12-28 12:27:13 +01:00
b49e684f5d
wined3d: Focus the focus window.
2009-12-23 14:27:29 +01:00
a0aa10eb5c
wined3d: Filter messages for the device's focus window instead of the swapchain's device window.
...
Usually these will be the same window, but they don't have to be.
2009-12-23 14:27:29 +01:00
718e55b9a6
wined3d: Don't render single buffered swapchains to a FBO.
2009-12-16 12:42:40 +01:00
cd623036fc
wined3d: Mark the draw buffer as dirty in context_create().
...
Currently callers of this function are responsible for setting the draw buffer
correctly, but they don't do a very good job:
- swapchain_init() sets the draw buffer to GL_BACK if there's a back buffer,
even though the context's target is always the front buffer.
- swapchain_create_context_for_thread() depends on (eventually) being called
by FindContext().
- create_primary_opengl_context() and
IWineD3DSwapChainImpl_SetDestWindowOverride() don't bother setting a draw
buffer at all.
Just marking the draw buffer dirty lets the context management sort it all
out, and is much simpler.
2009-12-16 12:22:29 +01:00
2ee6bb1cbb
wined3d: Frontbuffers are onscreen.
2009-12-15 11:58:53 +01:00
c24e48d937
wined3d: Filter window messages generated by switching to fullscreen and back.
2009-12-15 11:43:56 +01:00
0e270bbd22
wined3d: Send window messages through the swapchain before sending them to the application.
2009-12-15 11:43:41 +01:00
6bf79b885f
wined3d: Let the context handle the draw buffer in swapchain_blit().
2009-12-14 12:04:05 +01:00
cb076db8cc
wined3d: Move IWineD3DDeviceImpl_RestoreWindow() to swapchain.c.
2009-12-11 12:16:25 +01:00
542590cfc9
wined3d: Move IWineD3DDeviceImpl_SetupFullscreenWindow() to swapchain.c.
2009-12-11 12:16:25 +01:00
a9f2613d13
wined3d: Add a separate function for swapchain initialization.
2009-12-11 12:16:25 +01:00
b3defd4c80
wined3d: Rename "wineD3DDevice" to "device".
2009-12-10 11:54:47 +01:00
548b0bcda5
wined3d: Render to a FBO if the window size is changed.
2009-12-07 14:33:32 +01:00
817714912b
wined3d: Infrastructure to render swapchains to a FBO.
2009-12-07 14:33:24 +01:00
111307dfba
wined3d: Get rid of the GL_SUPPORT macro.
2009-10-29 13:09:33 +01:00
e6ca176a48
wined3d: Rename DestroyContext() to context_destroy().
2009-10-28 11:16:05 +01:00
98027cb535
wined3d: Call context_release() for wined3d contexts made current by context_create().
2009-10-28 11:15:27 +01:00
eeb54b9922
wined3d: Keep better track of where we're using wined3d contexts.
...
The idea here is that we can restore the thread's current GL context on
context_release() if it doesn't correspond to the current wined3d context on
context_acquire().
2009-10-28 11:15:19 +01:00
47c84f4f7f
wined3d: Use the DXGI naming convention for all formats.
2009-09-25 15:15:44 +02:00
a5214c306f
wined3d: Don't free D3D surfaces until the wined3d surface is destroyed.
...
This prevents for example a d3d9 depth stencil from being destroyed when it
has no external references but is still in use by the device/stateblock. A
nice side effect is that it simplifies handling of "implicit" surfaces like
the frontbuffer and backbuffers, as well as the forwarding of reference counts
for surfaces that are part of a texture.
2009-09-16 13:04:32 -05:00
3ec639e38c
wined3d: Fix swapchain draw buffer cleanup.
...
Destroying the first back buffer before the other ones might cause an already
freed surface to be used as target in FindContext().
2009-08-12 13:22:25 +02:00
7165bd19c1
wined3d: WINED3DTEXF_NONE only makes sense as a mip filter.
2009-08-05 11:20:43 +02:00
da1e5573da
wined3d: Rename WineD3DContext to struct wined3d_context.
2009-08-03 15:01:48 +02:00
43bfb240ad
wined3d: Use the context's current render target the get the swapchain drawable size.
...
"surface" might point to the frontbuffer while we're rendering to the
backbuffer, etc.
2009-08-03 15:01:25 +02:00
2c71b85334
wined3d: Explicitly pass the context to get_drawable_size().
2009-07-24 13:10:37 +02:00
401e99b0c0
wined3d: Remove some unnecessary code.
...
Now that we don't depend on activeContext and lastActiveRenderTarget to be
non-NULL this code can go.
2009-07-23 11:22:08 +02:00
69b7612265
wined3d: Get rid of struct glDescriptor.
...
In general it might not be a bad idea to group GL specific data into a
separate struct, but IWineD3DSurfaceImpl is currently the only thing that
bothers. It doesn't get it quite right either, since e.g. the PBO isn't in
glDescriptor either.
2009-07-10 12:13:24 +02:00
6d8e1e52c8
wined3d: Avoid destroying the currently active context for non-implicit swapchains.
2009-07-08 20:14:25 +02:00
2ac34bf231
wined3d: Add some missing float suffixes.
...
The compiler should be smart enough to fix most of these, but it looks sloppy.
2009-07-07 11:50:05 +02:00
2dc7fc2916
wined3d: Remove the format field from IWineD3DResourceClass.
2009-03-13 11:29:19 +01:00
33e0d1610a
wined3d: Sign-compare warnings fix.
2008-12-02 14:12:39 +01:00
f1271f846b
wined3d: Output the rectangles in the debug message.
2008-12-01 14:01:21 +01:00
93af8d3631
d3d: Do not restore the display mode in ddraw.
2008-11-03 13:34:13 +01:00
6cfef95ce7
wined3d: Convert source files to utf-8.
2008-10-18 19:21:20 +02:00
9d192c6251
wined3d: Skip copying the depth stencil if it's discarded.
...
This gives a small performance improvement for applications that are
smart enough to set the D3DPRESENTFLAG_DISCARD_DEPTHSTENCIL flag, or
to create depth stencils with Discard set to TRUE.
2008-09-23 12:25:18 +02:00
3d49e8cd5e
wined3d: Add a swapchain method to set the dest override.
...
DDraw can draw to the front buffer only, thus there's never a Present
call which could pass this window. Due to that a drawing-independent
method is needed.
2008-08-19 12:25:20 +02:00
7f2b8f9bba
wined3d: Support redirecting the primary context.
2008-08-19 12:21:49 +02:00
e5de2fc82c
wined3d: Move some swapchain code into a base class.
2008-08-19 12:20:47 +02:00
b0c4673779
wined3d: Update the surface locations in Present.
2008-08-05 14:09:37 +02:00
851dd7339e
wined3d: Implement overlay flipping.
2008-08-05 14:09:36 +02:00
8d930f6009
wined3d: Restore the gamma when destroying the swapchain.
2008-07-02 12:27:05 +02:00
633ee950a1
Assorted spelling fixes.
2008-05-07 12:07:11 +02:00
b1d8af7926
wined3d: Update copyright lines.
2008-04-02 20:22:42 +02:00
cd858dfa22
wined3d: Disable the SWAPEFFECT_DISCARD clear.
2007-12-18 13:23:00 +01:00
7f10ee453a
wined3d: Use the adapter to read the display mode.
2007-12-11 12:14:35 +01:00
9bc6200ece
wined3d: Add a method for querying the gl drawable size of rendertarget.
2007-12-04 14:32:39 +01:00
c698052b31
wined3d: Destroy GL contexts before changing the screen resolution.
2007-11-16 13:23:15 +01:00
a34c1f948b
wined3d: Free the backbuffer array.
2007-11-07 12:08:46 +01:00
4d4fce7e33
wined3d: Disconnect allocatedMemory and Heap allocation.
2007-11-01 12:38:37 +01:00
dcff7dc213
wined3d: Begin centralizing surface location management.
2007-10-26 15:17:19 +02:00
001f380ac9
wined3d: CreateContext should not be called between ENTER_GL/LEAVE_GL.
2007-10-01 12:35:36 +02:00
271fb0052f
wined3d: Add support for showing a logo.
2007-09-14 14:26:00 +02:00
ad692f2a83
wined3d: Add PBO support for dynamically locked surfaces.
2007-09-13 11:00:47 +02:00
5754726aeb
wined3d: Use the proper depth stencil format.
2007-08-13 12:36:55 +02:00
ac3927a73e
wined3d: Move over to WGL.
2007-08-08 15:32:01 +02:00
e77da5ef8a
wined3d: Don't call ActivateContext between ENTER_GL/LEAVE_GL.
2007-08-07 12:36:32 +02:00
38c7e9356e
wined3d: Present requires the swapchain's context.
2007-08-06 12:05:50 +02:00
2785395080
wined3d: glXSwapBuffers needs a GLX context.
2007-07-19 11:57:16 +02:00
b462ff0876
wined3d: Create multiple contexts for onscreen render targets.
2007-07-03 12:32:33 +02:00
078523f73e
wined3d: Present does not clear the depth stencil.
2007-06-14 13:22:19 +02:00
c9b8a79e0b
wined3d: Implement vertical refresh sync.
2007-06-14 13:21:54 +02:00
43fda1f4f0
wined3d: Only swap system memory resources of front and back buffer if they have the same size.
2007-06-14 13:20:53 +02:00
e49c480820
wined3d: Don't try to clear the depth stencil if there is none.
2007-04-17 11:13:03 +02:00
725057da47
d3d: Remove dependency on ddraw.h header.
2007-04-16 13:20:15 +02:00
290f2eb146
wined3d: Add Filtering to IWineD3DSurface::Blt and handle it.
...
This is to allow StretchRect to pass the texture filter to WineD3D.
DirectDraw sets the texture filter to WINED3DTEXF_NONE, simmilar to all
other functions which do not need filtering.
2007-04-07 10:58:10 +02:00
90fe64cee0
wined3d: Store an array of contexts in the swapchain.
...
This is a preparation for using multiple contexts on one drawable to
handle multithreading.
2007-03-19 12:23:16 +01:00
fcb83e7111
wined3d: Activate a context before doing opengl calls.
2007-03-19 12:22:57 +01:00
2f5f3825c6
wined3d: Replace inline static with static inline.
2007-03-17 20:04:46 +01:00
c54a0fc2cf
wined3d: Rework surface dirtification.
...
Previously the surfaces stored a flag if the system memory copy was
ahead of the gl copy(SFLAG_DIRTY) or the gl copy is
ahead(SFLAG_GLDIRTY). The pbuffer copy was 'managed' differently using
SFLAG_INPBUFFER and SFLAG_INTEXTURE.
This patch replaces them with 3 flags, INSYSMEM, INPBUFFER and
INTEXTURE which specify which copy contains the most up to date
copy. It is perfectly valid to have more than one of those flags
set. One must be set at least (except at init, when no content is in
the surface yet). When one copy is modified, the flags for the others
are removed.
2007-03-07 12:18:14 +01:00
5916fdd560
wined3d: Remove an outdated TODO comment.
...
BltFast takes care of activating the correct context nowadays.
2007-02-19 13:02:19 +01:00
a4bc52a89c
wined3d: Fix WINED3DPRESENT_PARAMETERS and use it instead of D3DPRESENT_PARAMETERS.
2007-02-16 12:31:03 +01:00
8e84127aed
wined3d: Restore the display mode when releasing a swapchain.
2007-02-15 16:56:02 +01:00
ae3327334d
wined3d: Swap the SFLAG_DIBSECTION flag when swaping hdc and memory.
2007-02-14 12:29:29 +01:00
f5f501d573
wined3d: Use the context manager to create onscreen contexts.
2007-02-13 12:08:02 +01:00
12252d0589
wined3d: Use the context manager to select the primary render target.
2007-02-13 12:05:35 +01:00
222c531b1a
wined3d: Count the framerate per swapchain, not globally.
2007-01-10 22:00:47 +01:00
656fc93815
Use GetDC instead of CreateDC where possible.
2007-01-02 17:16:36 +01:00
8355b1a501
wined3d: Allow the device to store multiple render targets.
2006-12-20 12:31:40 +01:00
47ffd7ae95
wined3d: Make some data const.
2006-12-14 20:11:41 +01:00
cb8652947a
d3d: Callback infrastructure for implicit render target destruction in IWineD3DSwapChain.
2006-12-06 12:39:00 +01:00
f8e7ddd798
Revert "d3d: Remove AddRef from IWineD3DDevice_GetBackBuffer.".
...
This reverts commit 478a414e58
2006-11-30 16:04:00 +01:00
c40501db50
Revert "d3d: Remove AddRef from IWineD3DDevice_GetSwapChain.".
...
This reverts commit f84f687e6d
2006-11-30 16:03:59 +01:00
f84f687e6d
d3d: Remove AddRef from IWineD3DDevice_GetSwapChain.
2006-11-22 11:40:50 +01:00
478a414e58
d3d: Remove AddRef from IWineD3DDevice_GetBackBuffer.
2006-11-22 11:39:52 +01:00
30e44c85c8
Assorted spelling fixes.
2006-11-07 15:25:24 +01:00
b1df1d8320
wined3d: Add D3DCLEAR codes to the WINED3D namespace.
2006-10-31 12:09:46 +01:00
4ada8a5e26
wined3d: Fix the FrontBuffer content capturing.
2006-10-20 10:19:39 +02:00
3447c21f22
wined3d: Correct the software cursor position if the app is running in windowed mode.
2006-10-20 10:19:28 +02:00
fb0c932f21
wined3d: D3DFORMAT: Consistently use WINED3D namespace.
2006-10-11 12:17:21 +02:00
3dcd3681f3
wined3d: Win64 printf fixes.
2006-10-02 14:38:04 +02:00
65e5ed60ae
wined3d: Do not use the IWineD3DSurface for the cursor.
2006-07-28 12:31:57 +02:00
a98ccb543d
wined3d: Draw the cursor.
2006-07-24 13:27:15 +02:00
9740555d83
wined3d: Duplicate flips in software if the local copy is up to date.
2006-07-18 11:24:51 +02:00
eb527c82e2
Add a common fps counter channel to ddraw, opengl and d3d.
2006-07-07 17:52:46 +02:00
3862f8e3d7
wined3d: Support more than one back buffer.
2006-06-15 16:51:41 +02:00
e9cbc66e93
wined3d: Make the virtual table functions static where possible.
2006-06-10 13:15:32 +02:00
2c3adec595
wined3d: Render target locking fixes.
2006-06-05 20:59:41 +02:00
e902cd119f
wined3d: Swapchain and back buffer corrections + tests.
2006-05-24 13:56:55 +02:00
a55da88d0b
wined3d: Do not addref a NULL backbuffer in IWineD3DSwapChain::GetBackBuffer.
2006-05-23 17:52:06 +02:00
360a3f9142
Update the address of the Free Software Foundation.
2006-05-23 14:11:13 +02:00
daa6a3d714
wined3d: Support for single buffering.
2006-05-15 14:02:18 +02:00
07f4f70487
wined3d: QueryInterface corrections.
2006-05-05 20:23:41 +02:00
108688f96a
wined3d: Don't do a logical AND on the swap effect.
2006-04-12 11:17:49 +02:00
Henri Verbeet