22f379ccac
d3d9: Some Windows drivers do not like reversed fog.
...
The fog test used start = 0.9 and end = 0.1. This is perfectly ok in
theory, but some Windows drivers do not like it. Since this test tests
how fog is calculated with Vertex and Pixel shaders put the fog range in
the normal order(start = 0.1, end = 0.9), this fixes a number of fog
failures on ATI cards on Windows.
2008-02-19 14:48:34 +01:00
1a906aace7
d3d9: Do not expect consistent failures.
...
The drivers for some radeon cards are not prepared for the things the
fixed function type test does and fail inconsistently. Thus skip the
color comparison if one of the two draws fails, and do not write an
extra complaint about the inconsistency
2008-02-19 14:48:20 +01:00
27dd3428d7
d3d9: Add a stencil+culling test.
2008-02-19 14:48:08 +01:00
dfda3c4dc8
d3d9: Fix copy and paste error in reset_enum_callback.
...
vertex_desc.Pool should obviously be used in the
WINED3DRTYPE_VERTEXBUFFER case instead of index_desc.Pool.
2008-02-19 14:11:43 +01:00
c2d97b2329
wined3d: Add a test for fixed function bump mapping.
2008-02-18 13:34:25 +01:00
4c8e218252
Assorted spelling fixes.
2008-02-15 12:09:24 +01:00
43ed6eae5a
d3d9: Assign to struct instead of using memcpy.
2008-02-15 11:09:37 +01:00
9950cb4bf5
wined3d: Switch the visual tests back to D3DDEVTYPE_HAL.
2008-02-15 09:40:12 +01:00
81de2fa10a
wined3d: Add a test for the vFace register.
2008-02-15 09:40:03 +01:00
ef4119029b
d3d9: Implement the device lost state.
2008-02-07 13:05:37 +01:00
b322f81b75
wined3d: Reject unsupported modes when restting the device.
2008-02-07 13:05:27 +01:00
b6ecb56eef
d3d9/tests: Accept the rejection of non-standard fixed function attrib types.
2008-02-05 12:41:48 +01:00
334e1600f2
d3d9/tests: Be less picky about X8L8V8U8 precision.
2008-02-05 12:41:39 +01:00
8daf8322ba
wined3d: Some texture transform test corrections.
2008-02-05 12:38:06 +01:00
635daf8b5d
wined3d: D3DTADDRESS_WRAP on conditional NP2 textures clamps to edge.
...
Conditional NP2 textures in Direct3D do not support D3DTADDRESS_WRAP
texture addressing. Similarly, GL_ARB_texture_rectangle textures do
not support GL_REPEAT. This patch adds a test which shows that _WRAP
clamps to the texture edge and implements that.
2008-02-05 12:37:49 +01:00
451d85a71c
d3d9: Some drivers allow non-aligned offsets.
2008-02-05 12:33:28 +01:00
450c634ab8
d3d9: Fix the type of three loop variables.
2008-02-04 11:11:20 +01:00
fc49a338bb
d3d9/tests: Initialize decl.
2008-01-23 12:05:32 +01:00
e11d7c63b4
d3d9 tests: Correct some typos.
2008-01-22 11:27:24 +01:00
44b52b128c
Assorted spelling fixes.
2008-01-16 12:48:29 +01:00
80953d62d7
d3d9: Reject IDirect3DDevice9::Reset with active default pool resources.
2008-01-14 15:12:00 +01:00
980ee365a0
wined3d: Use unsigned int instead of size_t for element counts.
2008-01-07 17:17:04 +01:00
0060027e4b
d3d9: Fix type of loop variable.
2008-01-04 12:12:34 +01:00
21a9c2d2f9
wined3d: Removed dead FIXME checks.
2008-01-03 11:53:29 +01:00
a77249ad14
d3d9/tests: Simplify condition in test_vshader_input().
2008-01-02 12:38:42 +01:00
2cb3f982a6
d3d9: Initialize pVertexBuffer.
2007-12-27 14:13:30 +01:00
998426e6b7
d3d9: Accept D3DDEVTYPE_REF devices in the vertex declaration test.
2007-12-21 13:44:21 +01:00
47a8a6bd44
wined3d: Implement and test vertex fixups with per stream offsets.
2007-12-21 13:44:16 +01:00
e27cf6ff8f
wined3d: Per stream offsets are 4 byte aligned.
2007-12-21 13:44:06 +01:00
8ff517eeb9
wined3d: Vertex attributes are 4 byte aligned.
2007-12-21 13:43:58 +01:00
a0b81e1c44
wined3d: Add a test for POSITIONT vertex fixups.
2007-12-21 13:15:09 +01:00
d8209b5de3
d3d9: Extend the fixed function vertex declaration test.
2007-12-21 13:14:49 +01:00
aaa0e5090a
wined3d: Add a test for 16 bit floats.
2007-12-20 12:10:16 +01:00
2d90449500
wined3d: Fixed function vertex attribute types are flexible.
2007-12-20 10:49:42 +01:00
f1c27eda6b
Assorted spelling fixes.
2007-12-18 14:16:11 +01:00
df77e28854
wined3d: Implement D3DFMT_G16R16.
2007-12-18 14:08:18 +01:00
de6aba11d4
d3d9: Add a note about a breakage in the refrast.
2007-12-18 13:22:27 +01:00
110facbac4
d3d9: Remove a few more incorrect D3DLOCK_DISCARDs.
2007-12-18 13:22:22 +01:00
b4a0d47809
d3d9: Add stub for Direct3DShaderValidatorCreate9().
2007-12-18 12:32:56 +01:00
b9860a9b27
d3d9: Do not set NONE MIN and MAG filters.
2007-12-17 12:30:04 +01:00
297b88486e
d3d9: D3DLOCK_DISCARD is not valid on managed textures.
2007-12-17 12:26:09 +01:00
b060390c73
d3d9: The refrast returns an error on invalid clear rects.
2007-12-17 12:26:01 +01:00
5f7a9cea38
Assorted spelling fixes.
2007-12-07 16:35:32 +01:00
f700cbe74b
wined3d: Add an alpha blending test.
2007-12-07 16:26:43 +01:00
0e8c13e630
wined3d: A more detailed occlusion query test and fixes.
2007-12-07 15:27:11 +01:00
ad9396302d
Removed some unneeded imports.
2007-12-06 21:24:24 +01:00
f4d2449244
wined3d: Test clearing regarding the scissor test and colorwrite.
2007-12-06 13:48:43 +01:00
77c8a1594d
d3d9: Remove unneeded casts.
2007-12-05 12:04:44 +01:00
fce9abd095
wined3d: Clear honors the viewport.
2007-12-04 14:32:39 +01:00
3cc253c557
wined3d: Enabling too many lights is silently ignored.
...
I'm resending this patch because my reply to Henri's concern came too late.
Henri noted that I am enabling lights that do not exist. Existing tests show
that if no light is assigned to the index, LightEnable creates a light with a
set of default parameters, so the tests should be fine.
From 9ee4c61805b50886f79e87d744b52f27b7b00b4e Mon Sep 17 00:00:00 2001
From: Stefan Doesinger <stefan@codeweavers.com>
Date: Thu, 29 Nov 2007 13:22:47 +0100
Subject: [PATCH] WineD3D: Enabling too many lights is silently ignored
This patch adds tests for all d3d versions that show that Windows
pretends that enabling more lights than supported succeeds. D3D_OK is
returned, and the light is reported as enabled.
What is not tested in this patch is the rendering output of this
situation, thus the FIXME is still written.
2007-12-03 13:44:07 +01:00
Stefan Dösinger