Henri Verbeet
368e5eb87a
wined3d: Avoid IWineD3DSurface_GetContainer().
2010-08-17 11:55:32 +02:00
Henri Verbeet
0b24db5db5
wined3d: Also store the subresource container type.
2010-08-17 11:55:32 +02:00
Matteo Bruni
b6637eb89f
wined3d: Remove isInDraw hack from context_setup_target.
...
It is conceptually wrong and actually broken too (as the comment there
said). Just remove the hack now and properly fix any regression that
may come up later by explicitely acquiring the right context where
needed (so, in surface_internal_preload and its callees).
2010-08-16 17:28:58 +02:00
Matteo Bruni
c1450356a7
wined3d: Fix context_apply_clear_state with ORM = backbuffer.
2010-08-16 17:28:58 +02:00
Matteo Bruni
e0528084b1
wined3d: Call set_render_offscreen at the end of context_setup_target.
...
This fixes a regression caused by 20f51c29a9
.
2010-08-16 17:28:57 +02:00
Henri Verbeet
5f2fcfdd6b
wined3d: Reattach FBO attachments when any of the corresponding surfaces is unloaded.
2010-08-16 13:47:08 +02:00
Henri Verbeet
237f39377f
wined3d: Move the draw buffer array to the context.
2010-07-30 11:36:03 +02:00
Matteo Bruni
20f51c29a9
wined3d: Setup target if offscreen rendering setting changed.
2010-07-26 18:38:33 +02:00
Henri Verbeet
943fb2fb57
wined3d: Do RGB <=> sRGB transfers using FBO blits.
...
Concept based on a patch by Stefan.
2010-07-26 18:38:31 +02:00
Henri Verbeet
d374d85055
wined3d: Clear all render targets in an MRT setup.
2010-07-23 11:46:47 +02:00
Stefan Dösinger
6b794cbd64
wined3d: Only perform sRGB write correction on formats that advertise it.
2010-07-22 10:22:26 +02:00
Henri Verbeet
4817a65091
wined3d: Preload resources before FBO setup.
2010-07-22 10:13:30 +02:00
Henri Verbeet
f7760656f3
wined3d: Remove LoadLocation() from the public wined3d surface interface.
2010-07-22 10:13:24 +02:00
Henri Verbeet
147f24dd78
wined3d: Remove ModifyLocation() from the public wined3d surface interface.
2010-07-22 10:13:13 +02:00
Rico Schüller
894a150f69
wined3d: Add GL_NV_point_sprite extension.
2010-07-19 15:10:32 +02:00
Henri Verbeet
b1abafcf8d
wined3d: Also flip the point sprite coordinate origin when rendering offscreen.
2010-06-11 16:22:25 +02:00
Henri Verbeet
e8ac9bbd7f
wined3d: Get rid of GLINFO_LOCATION.
2010-05-25 13:29:00 +02:00
Henri Verbeet
465e8f66cb
wined3d: Explicitly pass the FBO target to context_clean_fbo_attachments().
...
This should have been part of e01d56f331
.
2010-05-19 16:57:59 +02:00
Henri Verbeet
0fe7b45b6c
wined3d: Make context_attach_surface_fbo() static.
2010-05-19 16:57:59 +02:00
Henri Verbeet
e0d6ca57d7
wined3d: Check for offscreen contexts inside context_validate_onscreen_formats() itself.
2010-05-18 18:42:08 +02:00
Henri Verbeet
4889c33da6
wined3d: Explicitly pass the depth/stencil surface to context_validate_onscreen_formats().
...
This avoids switching to offscreen rendering in context_apply_blit_state() for
a depth buffer that isn't going to be used anyway. This switch would be
problematic for blits to the frontbuffer, since it's always onscreen. I.e.,
we'd be blitting to the screen, but with offscreen transforms.
2010-05-18 18:42:08 +02:00
Henri Verbeet
96cdab1792
wined3d: context_validate_onscreen_formats() may modify context->render_offscreen.
...
I merged this by accident in be43c867a5
.
2010-05-18 18:42:08 +02:00
Henri Verbeet
7a2debe113
wined3d: Use the FBO cache in swapchain_blit().
2010-05-06 14:17:30 +02:00
Henri Verbeet
3345146d0b
wined3d: Use the FBO cache in stretch_rect_fbo().
2010-05-06 14:17:24 +02:00
Henri Verbeet
9982a46296
wined3d: Use the FBO cache in context_apply_blit_state().
2010-05-06 14:16:44 +02:00
Henri Verbeet
ed75f5ca7a
wined3d: Setup the FBO for the correct target in context_apply_clear_state().
2010-05-05 10:37:40 +02:00
Henri Verbeet
4056f4bf99
wined3d: Explicitly pass the render target and depth/stencil surfaces to the FBO management functions.
2010-05-05 10:37:34 +02:00
Henri Verbeet
e01d56f331
wined3d: Explicitly pass the FBO target to the FBO management functions.
2010-05-05 10:37:28 +02:00
Henri Verbeet
4fd3050b98
wined3d: Move draw buffer setup code out of context_apply_fbo_entry().
2010-05-05 10:37:24 +02:00
Stefan Dösinger
e7066a90e1
wined3d: Don't grab the implicit depth stencil format in the wrong place.
...
This format is now explicitly passed to create_context.
2010-05-04 13:15:00 +02:00
Henri Verbeet
ff6cf84c40
wined3d: Attach the surfaces from the fbo_entry instead of the ones from the device.
...
Currently these are always the same, but that doesn't make it right.
2010-05-04 13:14:59 +02:00
Henri Verbeet
49e076eabd
wined3d: Separate context acquisition and state application.
2010-05-04 13:14:59 +02:00
Henri Verbeet
be43c867a5
wined3d: Split context_apply_state() into separate functions for each usage.
2010-05-04 13:14:59 +02:00
Henri Verbeet
d977e91b11
wined3d: Store back buffer surfaces as IWineD3DSurfaceImpl pointers in the swapchain.
2010-04-27 12:02:14 -05:00
Henri Verbeet
62acb2fdbc
wined3d: Store the front buffer surface as an IWineD3DSurfaceImpl pointer in the swapchain.
2010-04-27 12:01:59 -05:00
Henri Verbeet
d1ea48b971
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_internal_preload().
2010-04-26 09:04:35 -05:00
Henri Verbeet
6b34b8e6d1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_acquire().
2010-04-22 11:28:17 +02:00
Henri Verbeet
1c403e44b5
wined3d: Store the current render target as an IWineD3DSurfaceImpl pointer in the context.
2010-04-22 11:28:12 +02:00
Henri Verbeet
95fb8eaa14
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_setup_target().
2010-04-22 11:28:06 +02:00
Henri Verbeet
1b26ccde91
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to FindContext().
2010-04-22 11:28:01 +02:00
Henri Verbeet
79a014a505
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_get_gl_buffer().
2010-04-21 11:57:32 +02:00
Henri Verbeet
c5de1e1045
wined3d: Store the depth/stencil surface as an IWineD3DSurfaceImpl pointer in the device.
2010-04-20 11:14:42 +02:00
Henri Verbeet
c7a1848656
wined3d: Store render targets as IWineD3DSurfaceImpl pointers in the device.
2010-04-20 11:14:30 +02:00
Henri Verbeet
92a44884c7
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_set_compatible_renderbuffer().
2010-04-19 14:55:35 +02:00
Henri Verbeet
03dc612c9c
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_is_offscreen().
2010-04-19 14:55:31 +02:00
Henri Verbeet
da1b459754
wined3d: Store the depth/stencil attachment as IWineD3DSurfaceImpl pointer in struct fbo_entry.
2010-04-16 12:09:45 +02:00
Henri Verbeet
be993fc49f
wined3d: Store render target attachments as IWineD3DSurfaceImpl pointers in struct fbo_entry.
2010-04-16 12:09:42 +02:00
Henri Verbeet
24c93d48aa
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_attach_depth_stencil_fbo().
2010-04-16 12:09:39 +02:00
Henri Verbeet
95130a7d5e
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_attach_surface_fbo().
2010-04-16 12:09:36 +02:00
Henri Verbeet
870b3cb40b
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_apply_attachment_filter_states().
2010-04-16 12:09:32 +02:00