44ab3d70f1
wined3d: Handle depth/stencil surfaces in IWineD3DSurfaceImpl_LoadLocation().
2010-05-17 13:19:40 +02:00
49e076eabd
wined3d: Separate context acquisition and state application.
2010-05-04 13:14:59 +02:00
f09b8e454d
wined3d: Avoid some needless depth buffer copies.
...
If an application switches between render targets of a different size, but
with the same depth/stencil surface it'll typically clear the depth/stencil
surface before drawing. However, in case of the smaller render target that
wouldn't be a full clear, so we'd have to do a depth copy if we also switched
between onscreen and offscreen rendering. Keeping track of which part of the
depth/stencil surface is current for onscreen/offscreen allows us to avoid
most of these kinds of copies. The current scheme requires the current/dirty
rectangle to have an origin at (0,0). This could be extended to an arbitrary
rectangle, but the bookkeeping becomes somewhat more complex in that case, and
it's not clear that there would be much of a benefit at this point.
2010-04-29 10:19:39 -05:00
6b34b8e6d1
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to context_acquire().
2010-04-22 11:28:17 +02:00
7b47dabd09
wined3d: Avoid some unnecessary invalidations of the the onscreen depth buffer.
...
This can happen for example when the application switches to a different
depth/stencil for offscreen rendering and back again.
2010-04-21 11:57:32 +02:00
c5de1e1045
wined3d: Store the depth/stencil surface as an IWineD3DSurfaceImpl pointer in the device.
2010-04-20 11:14:42 +02:00
c7a1848656
wined3d: Store render targets as IWineD3DSurfaceImpl pointers in the device.
2010-04-20 11:14:30 +02:00
efb3993a3a
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_modify_ds_location().
2010-04-19 14:55:24 +02:00
ae46589f53
wined3d: Simply pass an IWineD3DSurfaceImpl pointer to surface_load_ds_location().
2010-04-19 14:55:19 +02:00
8eb2a2cf0c
wined3d: Disable strict draw ordering by default.
...
While some performance hit from the extra flushes was expected and would be
acceptable, the performance hit can be over 50% on some configurations, which
clearly isn't acceptable. This patch introduces a "StrictDrawOrdering"
registry key for applications affected by this, until we have a more
structural solution.
2010-04-13 21:13:36 +02:00
1181762f99
wined3d: Implement manual buffer fencing.
2010-03-23 12:31:15 +01:00
7c930589bc
wined3d: Avoid some common invalid context accesses.
...
Unfortunately there are plenty of other places left. Perhaps we should
consider creating our own window when the context becomes invalid and making
the context current on that instead.
2010-03-18 10:25:09 +01:00
135f364110
wined3d: Kill VTRACE.
2010-03-18 10:25:02 +01:00
ce42470138
wined3d: Ensure draw ordering across contexts.
2010-01-28 11:07:59 +01:00
98568f0ba1
wined3d: Add support for ARB_vertex_array_bgra.
2010-01-26 12:08:27 +01:00
c8681f885d
wined3d: Fix use of memset (Coccinelle).
2010-01-08 10:13:51 +01:00
ea0af93c19
wined3d: Get rid of some redundant local variables.
...
E.g. "This" variables that are only used in traces.
2009-12-22 13:48:25 +01:00
111307dfba
wined3d: Get rid of the GL_SUPPORT macro.
2009-10-29 13:09:33 +01:00
48e03bc189
wined3d: Introduce a separate structure for various OpenGL implementation limits.
2009-10-29 13:09:27 +01:00
eeb54b9922
wined3d: Keep better track of where we're using wined3d contexts.
...
The idea here is that we can restore the thread's current GL context on
context_release() if it doesn't correspond to the current wined3d context on
context_acquire().
2009-10-28 11:15:19 +01:00
6be41fd59a
wined3d: Get rid of GL_LIMITS.
2009-10-22 10:46:05 +02:00
47c84f4f7f
wined3d: Use the DXGI naming convention for all formats.
2009-09-25 15:15:44 +02:00
2b2fc827ce
wined3d: Remove unused parameters to drawPrimitive().
2009-09-11 12:09:14 +02:00
65f3d54da5
wined3d: Silence a compiler warning.
2009-09-08 13:03:24 +02:00
560d63548d
wined3d: Remove trailing spaces.
2009-08-27 11:45:37 +02:00
c514323442
wined3d: Properly check if an attribute is used in drawStridedInstanced().
2009-08-27 11:45:37 +02:00
d4e167dfbc
wined3d: Properly check if an attribute is used in remove_vbos().
2009-08-26 12:10:45 +02:00
c9f270a5d9
wined3d: Properly check if an attribute is used in drawStridedSlow().
2009-08-25 11:09:34 +02:00
c1c58f85ca
wined3d: Properly check if an attribute is used in drawStridedSlowVs().
2009-08-24 15:17:33 +02:00
b8078fc747
wined3d: Use WINED3D_UNMAPPED_STAGE in some more places.
2009-08-17 13:57:50 +02:00
0479fb13b5
wined3d: Explicitly pass the context to drawStridedSlow().
2009-08-07 12:11:10 +02:00
a7251f0f4e
wined3d: Track render_offscreen in the context.
...
This makes sure the relevant states in FindContext() are actually marked dirty
when needed.
2009-08-06 17:26:30 +02:00
da1e5573da
wined3d: Rename WineD3DContext to struct wined3d_context.
2009-08-03 15:01:48 +02:00
be536ebe2f
wined3d: Get rid of activeContext.
2009-07-24 13:10:57 +02:00
c8fe24d29e
wined3d: Explicitly pass the context to surface_load_ds_location().
2009-07-24 13:10:47 +02:00
ee4d18cc83
wined3d: Pass NULL to ActivateContext() when we don't need a specific target.
...
Once we keep track of the wined3d context for each thread,
lastActiveRenderTarget won't do what we want here.
2009-07-21 14:22:44 +02:00
32fd8f2130
wined3d: checkGLcall() doesn't need a \n.
2009-07-07 11:50:22 +02:00
2ac34bf231
wined3d: Add some missing float suffixes.
...
The compiler should be smart enough to fix most of these, but it looks sloppy.
2009-07-07 11:50:05 +02:00
964f4b0157
wined3d: Make sure we have an active GL context in buffer_PreLoad().
2009-06-25 11:47:16 +02:00
9a58f37cd3
wined3d: Move the num_untracked_materials lookup out of the main drawing loop.
2009-06-22 12:58:59 +02:00
dcc490e82f
wined3d: Don't load a rendertarget just because alpha test is enabled.
...
Unlike the depth test, the alpha test doesn't compare to the existing fragment
but against a reference value.
2009-06-19 13:52:47 +02:00
60317d027a
wined3d: Avoid some unneeded rendertarget copies.
2009-06-17 12:13:07 +02:00
8be020776b
wined3d: Avoid some unneeded depthstencil copies.
2009-06-17 12:13:07 +02:00
f347374470
wined3d: Remove some apparently leftover debug code.
2009-05-25 11:23:39 +02:00
b35e469d9d
wined3d: Document functions that depend on the caller to do GL locking.
2009-05-15 10:25:41 +02:00
d2e12a19ca
wined3d: Make use of GL_ARB_half_float_vertex.
...
This extension is a subset of GL_NV_half_float that defines support
for the stream format(same constant), but doesn't define texture
formats or immediate mode entrypoints.
2009-05-05 14:13:02 +02:00
014c4bfc70
wined3d: Save some memory in vertex buffers.
...
In most cases we're fine with the vbo and glMapBuffer and never use the actual
heap memory copy. Try to stick to just the vbo copy and avoid allocating the
extra heap memory. In case it is needed(emulation or vertex conversion), fall
back to the old double buffering mode.
2009-04-10 11:14:32 +02:00
2a7a237170
wined3d: Merge indexbuffer and buffer implementations.
2009-04-08 11:37:24 +02:00
ef2d704183
wined3d: Store the format_desc itself in struct wined3d_stream_info_element.
2009-03-30 15:11:24 +02:00
4434d00f84
wined3d: Unify vertex and texture formats.
...
Some fields should be redundant now, eg. gl_vtx_type and glType. I'll leave
that for a different patch to fix though.
2009-03-27 15:51:25 +01:00
Henri Verbeet