Nikolay Sivov
306d062f46
d2d1: For transformed geometry forward StrokeContainsPoint() to its source geometry.
...
Signed-off-by: Nikolay Sivov <nsivov@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2016-11-01 14:38:24 +01:00
Andrew Eikum
2e08bc0ffc
d2d1: Implement d2d_path_geometry_FillContainsPoint().
...
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2016-10-26 15:35:58 +02:00
Andrew Eikum
930dd951b3
d2d1: Implement d2d_transformed_geometry_FillContainsPoint().
...
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2016-10-26 15:35:55 +02:00
Henri Verbeet
3fb1fb9616
d2d1: Calculate intersections in a more robust way in d2d_geometry_intersect_self().
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-11-19 12:59:39 +09:00
Henri Verbeet
a84658f928
d2d1: Properly handle collinear edges in d2d_cdt_insert_segment().
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-10-23 20:57:16 +09:00
Henri Verbeet
c125612cbb
d2d1: Properly handle collinear edges in d2d_cdt_cut_edges().
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-10-23 20:57:03 +09:00
Henri Verbeet
c575f04b68
d2d1: Properly check if a face is real in d2d_path_geometry_add_face().
...
In particular, the existing test may fail if the convex hull has only three
vertices.
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-10-09 12:58:23 +09:00
Henri Verbeet
76aa675da3
d2d1: Only search for the initial edge for each figure in d2d_cdt_insert_segments().
...
For each subsequent segment we can just re-use the edge we just inserted.
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-10-08 12:53:23 +09:00
Henri Verbeet
e6da1a780e
d2d1: Only test figures that overlap the probe in d2d_path_geometry_point_inside().
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-10-08 12:53:18 +09:00
Henri Verbeet
c98d34d745
d2d1: Only test overlapping figures in d2d_geometry_intersect_self().
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
2015-10-08 12:53:10 +09:00
Henri Verbeet
7e6b52e88b
d2d1: Implement d2d_cdt_incircle() in a more robust way.
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
2015-10-07 13:03:22 +09:00
Henri Verbeet
e8b4d8e0d0
d2d1: Implement d2d_point_ccw() in a more robust way.
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
2015-10-07 13:01:07 +09:00
Henri Verbeet
f35bfff4fc
d2d1: Properly handle the candidate being the last vertex before the base edge origin in d2d_cdt_fixup().
...
Signed-off-by: Henri Verbeet <hverbeet@codeweavers.com>
2015-10-07 13:00:53 +09:00
Piotr Caban
f5b64c0d35
d2d1: Avoid possible infinite loop in d2d_geometry_intersect_self caused by rounding errors.
2015-08-27 21:43:47 +09:00
Henri Verbeet
acbb0bdfac
d2d1: Implement d2d_factory_CreateTransformedGeometry().
2015-08-20 20:26:41 +09:00
Henri Verbeet
69906b59d8
d2d1: Properly cleanup in d2d_rectangle_geometry_init() failure paths.
...
This avoids leaking the factory reference in particular.
2015-08-20 20:26:36 +09:00
Henri Verbeet
1bea5f44b0
d2d1: Make d2d_geometry_sink_vtbl static const.
...
Spotted by Francois Gouget.
2015-08-17 22:50:46 +09:00
Henri Verbeet
47f9f09c73
d2d1: Implement d2d_rectangle_geometry_GetFactory().
2015-08-03 10:56:22 +02:00
Henri Verbeet
14c0009add
d2d1: Implement d2d_path_geometry_GetFactory().
2015-07-31 12:08:59 +02:00
Henri Verbeet
b33786ce6d
d2d1: Implement initial support for drawing bezier curves.
2015-07-20 11:50:20 +02:00
Henri Verbeet
025c320145
d2d1: Implement d2d_geometry_sink_SetFillMode().
2015-07-20 11:50:18 +02:00
Henri Verbeet
bebee86da6
d2d1: Properly trace "vertex_count" in d2d_path_geometry_triangulate().
2015-07-15 23:18:45 +09:00
Henri Verbeet
a8f45dff60
d2d1: Implement d2d_geometry_sink_AddLines().
2015-07-14 23:27:22 +09:00
Henri Verbeet
b92a05c84e
d2d1: Implement d2d_d3d_render_target_FillGeometry().
2015-07-14 23:27:21 +09:00
Henri Verbeet
391fda7599
d2d1: Implement d2d_factory_CreateRectangleGeometry().
2015-07-14 23:27:21 +09:00
Henri Verbeet
b108a2ff78
d2d1: Implement d2d_path_geometry_GetSegmentCount().
2015-07-10 22:23:02 +09:00
Henri Verbeet
dfe1486e4b
d2d1: Implement d2d_path_geometry_GetFigureCount().
2015-07-10 22:23:00 +09:00
Henri Verbeet
ddec784aee
d2d1: Implement d2d_geometry_sink_BeginFigure() and d2d_geometry_sink_EndFigure().
2015-07-10 22:22:58 +09:00
Henri Verbeet
2f6f8f1242
d2d1: Only allow path geometries to be opened once.
2015-07-10 22:22:56 +09:00
Henri Verbeet
8b170f0f59
d2d1: Implement d2d_geometry_sink_AddBezier().
2015-06-16 16:48:54 +09:00
Henri Verbeet
5d5fdbc63b
d2d1: Implement d2d_geometry_sink_AddQuadraticBezier().
2015-06-16 16:48:52 +09:00
Henri Verbeet
95a12f246a
d2d1: Implement d2d_geometry_sink_AddLine().
2015-06-16 16:48:50 +09:00
Henri Verbeet
e8d41475b9
d2d1: Implement d2d_path_geometry_Open().
2015-06-15 22:10:36 +09:00
Henri Verbeet
2b1d3bfb47
d2d1: Implement d2d_factory_CreatePathGeometry().
2015-06-15 22:10:36 +09:00