Some static function declarations cause unused function warnings if
certain config options are turned off via `ftoption.h'.
* src/base/ftbase.h, src/base/ftrfork.c, src/sfnt/ttbdf.h,
src/truetype/ttgxvar.h: Add #ifdef guards around these sections.
Glyph advance widths were being written to the new `PS_Decoder' but not
saved to the underlying format specific decoder. This caused pure CFF
fonts to have bad advance width.
* include/freetype/internal/psaux.h (PS_Decoder): Change `glyph_width'
field to pointer.
Remove unused fields.
* src/psaux/psobjs.c (ps_decoder_init): Change `glyph_width' from copy
to reference.
Remove unused.
* src/psaux/psft.c (cf2_setGlyphWidth): Update code.
Since Ewald Hew factored the Adobe hinting engine out of the CFF
driver code, we can now use it on Type 1 (and CID) font formats, as
both have the same hinting philosophy.
This change activates the Adobe hinter when in LIGHT mode, and
therefore always unless explicitly asking for the auto-hinter. This
makes LIGHT behavior consistent with CFF fonts. As of this commit,
the hinting engine table looks as follows.
LIGHT NORMAL
-------------------------
TrueType Auto v40
CFF Adobe Adobe
Type 1 Adobe Adobe
The interpreter in Type 1 mode rewinds the charstring after collecting
all hints for building the initial hintmap (commit d52dd7f). However,
some charstrings use `endchar' in a final subroutine call, rewinding to
the start of that subroutine, and only a small section of the actual
glyph is drawn.
* src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_cmdENDCHAR>:
Ensure we are on the top level charstring before rewinding.
See the report by Yang Yinsen.
https://lists.gnu.org/archive/html/freetype-devel/2017-11/msg00000.html
* src/truetype/ttobjs.c (trick_names): Add `DFGothic-EB',
`DFGyoSho-Lt', `DFHSGothic-W5', `DFHSMincho-W3' and `DFHSMincho-W7'.
(tt_check_trickyness_sfnt_ids): Add checksums for DFGothic-EB,
DFGyoSho-Lt, DFHSGothic-W5, DFHSMincho-W3 and DFHSMincho-W7. Also
add checksums for DLCLiShu and DLCHayBold which their family names
were already listed but their checksums were previously unknown.
We used to split large glyphs into horizontal bands and continue
bisecting them still horizontally if that was not enough. This is
guaranteed to fail when a single scanline cannot fit into the
rendering memory pool. Now we bisect the bands vertically so that
the smallest unit is a column of the band height, which is guranteed
to fit into memory.
* src/smooth/ftgrays.c (gray_convert_glyph): Implement it.
At large sizes almost but not exactly horizontal segments can quickly
drain the rendering pool. This patch at least avoids filling the pool
with trivial cells. Beyond this, we can only increase the pool size.
Reported, analyzed, and tested by Colin Fahey.
* src/smooth/ftgrays.c (gray_set_cell): Do not record trivial cells.
* src/base/ftobjs.c (FT_Load_Glyph): Tag tracing messages with
function name, glyph index, and load flags.
(FT_Select_Metrics, FT_Request_Metrics): Remove all tracing.
(FT_Select_Size, FT_Request_Size): Improve tracing.
* src/base/ftobjs.c (FT_New_Library): C4702: unreachable code.
(ft_glyphslot_preset_bitmap): C4244: possible loss of data.
* src/cff/cffload.c (cff_blend_doBlend): C4244: possible loss of data.
Turn `sum' into unsigned.
In runs on Noto Naskh Arabic, this results in 89 sets created
instead of 340 before. Makes auto-hinter setup with HarfBuzz
enabled 20% to 30% faster.
* src/autofit/afshaper.c (af_shaper_get_coverage): Implement it.
Implement property service in `type1' and `cid' drivers to allow
switching between FreeType or Adobe hinting engine when both are
available.
* src/cid/cidriver.c (cid_property_{set,get}, cid_services),
src/type1/t1driver.c (t1_property_{set,get}, t1_services): Add
Properties service.
* src/cid/cidobjs.c (cid_driver_init), src/type1/t1objs.c
(T1_Driver_Init): Add default property values.
This controls whether the old Type 1 engine gets compiled into FreeType.
It is disabled by default.
* devel/ftoption.h, include/freetype/config/ftoption.h
(T1_CONFIG_OPTION_OLD_ENGINE): New macro.
* include/freetype/internal/psaux.h (PS_Decoder): Remove unused field.
* include/freetype/internal/psaux.h, src/cid/cidgload.c
(cid_load_glyph), src/psaux/psauxmod.c, src/psaux/psobjs.c
(ps_builder_add_point), src/psaux/t1decode.c
(t1_lookup_glyph_by_stdcharcode, t1_decoder_parse_glyph,
t1operator_seac, t1_decoder_parse_charstrings), src/psaux/t1decode.h,
src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Surround
relevant code with macro.
Minor code changes.
Duplicate the fast advance width calculations from the old parser. This
is to facilitate adding options for compiling out the old parser.
* src/psaux/t1decode.{c,h} (t1_decoder_parse_metrics): New function.
* include/freetype/internal/psaux.h (T1_Decoder_Funcs): New entry
`parse_metrics'.
* src/psaux/psauxmod.c: Set the new entry.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String),
src/cid/cidgload.c (cid_load_glyph): Separate
conditional for selecting engine.
This commit completely separates the interaction between named
instances and variation functions. In particular, resetting the
variation returns to the current named instance (if set) and not to
the base font.
As a side effect, variation functions no longer change the named
instance index.
* src/cff/cffobjs.c (cff_face_init): Use MM service's `set_instance'
function.
Also apply `MVAR' table to named instances.
* src/truetype/ttgxvar.c (TT_Get_MM_Var): Add cast.
(tt_set_mm_blend): No longer check whether requested variation
coincides with a named instance.
(TT_Set_Var_Design): Use current named instance for default
coordinates.
* src/truetype/ttobjs.c (tt_face_init): Use `TT_Set_Named_Instance'.
* include/freetype/internal/cfftypes.h (CFF_FontRec): Add
`font_extra' entry.
* src/cff/cffdrivr.c (cff_ps_get_font_extra): New function to
retrieve FSType info from the embedded PostScript data.
(cff_service_ps_info): Register function.
* src/cff/cffload.c (cff_font_done): Free `font_extra'.
* src/base/ftobjs.c (FT_Load_Glyph): Preset the bitmap metrics when
appropriate but `FT_Render_Glyph' is not called.
* include/freetype/freetype.h (FT_GlyphSlotRec): Document the change.
* src/raster/ftrend1.c (ft_raster1_render): Clean up the exit.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Reduce
translations and clean up the exit.
(ft_smooth_render_lcd, ft_smooth_render_lcd): Remove unused `error'..
This mainly just extracts the code for presetting the bitmap metrics
from the monochrome, grayscale, and LCD renderers into a separate
function.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): New function that
calculates prespective bitmap metrics for the given rendering mode.
* include/freetype/internal/ftobjs.h (ft_glyphslot_preset_bitmap):
Declare it.
* src/base/ftlcdfil.c (ft_lcd_padding): New helper function that adds
padding to CBox taking into account pecularities of LCD rendering.
* include/freetype/ftlcdfil.h (ft_lcd_padding): Declare it.
* src/raster/ftrend1.c (ft_raster1_render): Reworked to use
`ft_glyphslot_preset_bitmap'.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Ditto.
(ft_smooth_render_lcd, ft_smooth_render_lcd): The pixel_mode setting
is moved to `ft_glyphslot_preset_bitmap'.
* include/freetype/internal/psaux.h, src/psaux/psobjs.{c,h}:
Rearrange `ps_builder_init' arguments to conventional order.
* src/psaux/psft.c (cf2_decoder_parse_charstrings): Add a check and
notice for `SubFont' in Type 1 mode.
As the former only contains a single procedure, move it into
`psobjs' for simplicity. Also change the parameter order to the
conventional one.
* src/psaux/psdecode.c (ps_decoder_init): Moved to...
* src/psaux/psobjs.c: ...Here.
* src/psaux/psdecode.h, src/psaux/psobjs.h: Ditto.
* include/freetype/internal/psaux.h (PSAux_ServiceRec): Update
`ps_decoder_init' function signature.
* src/cff/cffgload.c, src/cid/cidgload.c, src/type1/t1gload.c:
Update calls.
* src/psaux/psaux.c, src/psaux/psauxmod.c: Update includes.
* src/psaux/Jamfile (_sources), src/psaux/rules.mk (PSAUX_DRV_SRC):
Update file references.
Type 1 hinting breaks sometimes when mid-charstring hints should
have been in the initial hintmap. This fix adds a preprocessing
pass that reads all hints and builds the correct initial hintmap
first, before proceeding to build the glyph outline.
* src/psaux/psintrp.c (cf2_interpT2CharString): New
`initial_map_ready' boolean flag.
Ignore outline commands and hint changes on first pass.
<cf2_cmdENDCHAR>: Add section to build hintmap and rewind.
* src/psaux/pshints.c (cf2_hintmap_dump): New function.
(cf2_hintmap_insertHint): Trace incoming and inserted hints.
(cf2_hintmap_build): Dump hintmap before and after hint adjustment.
* src/psaux/psintrp.c (cf2_interpT2CharString): Fix check for pop
results.
s/font->decoder/decoder/ where necessary.
<cf2_cmdHSTEM, cf2_cmdVSTEM, cf2_escHSTEM3, cf2_escVSTEM3>: Use
offset parameter in `cf2_doStems' instead of doing correction for
left-sidebearing.
This is similar to what was done in the `type1' module.
* src/cid/cidriver.c (t1cid_driver_class): Update declaration.
* src/cid/cidobjs.c: Include FT_TYPE1_DRIVER_H.
(cid_driver_init): Update code.
Change `t1_make_subfont' to take in the Private dict record as an
argument. This is because Type 1 and CID font records in FreeType
have this in different places.
* src/psaux/psobjs.c (t1_make_subfont): Change `T1_Face' to
`FT_Face' so that CID is also accepted.
Take `PS_Private' as an argument and let caller figure out where the
Private dict actually is.
Update references.
* include/freetype/internal/psaux.h, src/psaux/psobjs.h: Update
declaration.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Update
call.
This concludes the changes needed to add Type 1 support.
* src/psaux/psintrp.c: Update includes.
(cf2_interpT2CharString) <cf2_escSEAC>: Implement this similarly to
implied seac for CFF.
* src/psaux/t1decode.c (t1_lookup_glyph_by_stdcharcode_ps): New
function to look up the glyph index.
* src/psaux/psft.c (cf2_getT1SeacComponent,
cf2_freeT1SeacComponent): New functions to get the charstrings for
seac components.
* src/psaux/t1decode.h, src/psaux/psft.h: Update declarations.
* src/psaux/psintrp.c (cf2_interpT2CharString)
<cf2_escCALLOTHERSUBR>: Fix Flex feature handling (OtherSubrs 0, 1,
2).
<cf2_cmdRMOVETO>: Do not actually move the `glyphPath' while doing
flex. This is to avoid closing the current contour.
* src/psaux/psintrp.c (cf2_interpT2CharString)
<cf2_escCALLOTHERSUBR>: Copy code from
`t1_decoder_parse_charstrings' (in `t1decode.c').
OtherSubr 3 (change hints) should reset the hintmask, so that the
new hints are applied.
Fix function calls and stack access.
* src/psaux/psintrp.c (cf2_interpT2CharString): Change how unhandled
OtherSubr results are stored. Implement the PostScript stack using
an array.
<cf2_escPOP>: Ensure that the stack is not cleared after getting
`OtherSubr' results.
Fix stack access.
* src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_escDIV>: Add
Type 1 mode. Type 1 requires large integers to be followed by
`div'; cf. `Adobe Type 1 Font Format', section 6.2.
<op == 255>: Push Type 1 four-byte numbers as `Int' always. This is
to ensure `div' and `callsubr' get values they can use.
* src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_cmdHSTEM,
cf2_cmdVSTEM>: Add correction for left sidebearing in Type 1 mode.
Allow adding hints mid-charstring.
<cf2_escVSTEM3, cf2_escHSTEM3>: Translate into equivalent commands
for three normal stem hints. This requires some recalculation of
stem positions.
Correction for left sidebearing.
* src/psaux/psintrp.c (cf2_doStems): `hsbw' or `sbw' must be the
first operation in a Type 1 charstring.
(cf2_interpT2CharString): Remove unused variables.
<cf2_cmdHMOVETO, cf2_cmdVMOVETO, cf2_cmdRMOVETO>: `hsbw' or `sbw'
must be the first operation in a Type 1 charstring.
<cf2_cmdHSBW, cf2_escSBW>: Fix data access and add correction for
left sidebearing.
* src/psaux/psintrp.c (cf2_interpT2CharString) <c2f_cmdCLOSEPATH>:
Use the right builder function. We can use the `haveWidth' boolean
already present, instead of implementing `parse_state'.
The following Type 1 specific ops have been added (copied from
`t1decode'):
closepath
vstem3
hstem3
seac
sbw
callothersubr
pop
setcurrentpoint
hsbw
The following require a Type 1 mode, because of differences in
specification:
hstem
vstem
vmoveto
callsubr
div
rmoveto
hmoveto
Numbers
The subsequent commits will implement these changes and adapt
accesses of data and objects to the new interpreter.
NOTE: Will not compile in the meantime!
* src/psaux/psintrp.c: Add opcodes to enum.
(cf2_interpT2CharString): Copy relevant code over from
`t1_decoder_parse_charstrings' (in `t1decode.c').
The Type 1 advance width calculation passes null for glyph slot,
etc, which can cause null pointer access in the new interpreter.
Fall back to the old one for now.
Fix the large glyph retry code and ensure hinting and scaling flags
are set properly.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Add a
check for metrics_only.
Set the `force_scaling' flag.
(T1_Parse_Glyph): Updated.
(T1_Load_Glyph): Add `hinting' and `scaled' flags.
Synthesize a `SubFont' object for Type 1 fonts. This is used in the
interpreter to access Private dict data, which are stored in
different places for Type 1 and CFF. This allows the same data to
be used in either mode.
* src/psaux/psobjs.c (t1_make_subfont): New procedure to copy
required values to a dummy `CFF_SubFont' object. This is similar to
`cff_make_private_dict'.
* src/psaux/psobjs.h: Add the new declaration.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c: Ditto.
Add this to the PSAux Service for future use with CID fonts.
* src/type1/t1gload.c: Include FT_INTERNAL_CFF_TYPES_H.
(T1_Parse_Glyph_And_Get_Char_String): Add the call.
Move `CF2_Font' instance to `PS_Decoder'. This is the context for
the interpreter and since it is currently stored in `CFF_Font', is
unavailable in Type 1 mode.
* include/freetype/internal/psaux.h (T1_Decoder, PS_Decoder): New
`cf2_instance' field.
* src/psaux/psdecode.c (ps_decoder_init): Copy `cf2_instance' to
`PS_Decoder'.
* src/psaux/t1decode.c (t1_decoder_done): Add finalization code.
* src/psaux/psft.c (cf2_decoder_parse_charstrings): Update accesses.
Add the callback and some conditionals to switch between the two
engines.
* include/freetype/internal/psaux.h (T1_Decoder_FuncsRec): Change
function declarations.
* src/psaux/psauxmod.c (T1_Decoder_FuncsRec): Register the
callbacks.
* src/psaux/psobjs.c (ps_builder_add_point): Add conditionals for
number conversion.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Add code
to choose which renderer to use.
* src/cid/cidgload.c (cid_load_glyph): Update call.
* src/base/ftobjs.c, src/psaux/psobjs.c, src/type1/t1gload.c: Update
includes.
Use the previously changed PS_Driver in type1 module to store
hinting engine configuration.
* include/freetype/ftt1drv.h: New file.
Duplicate and rename config options from CFF.
* include/freetype/config/ftheader.h (FT_TYPE1_DRIVER_H): New macro.
* src/type1/t1driver.c (t1_driver_class): Update declaration.
* src/type1/t1objs.c: Include FT_TYPE1_DRIVER_H.
(T1_Driver_Init): Update code.
This is so that we can use the same hinting engine parameters for
Type 1.
* include/freetype/internal/cffotypes.h (CFF_Driver): Rename and
move to...
* include/freetype/internal/psaux.h (PS_Driver): ...here.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffload.c,
src/cff/cffobjs.c, src/cff/cffobjs.h, src/psaux/psft.c,
src/psaux/psobjs.c: Update references.
Make some fields more generic, so that we can access them the same
way regardless of Type 1 or CFF.
* include/freetype/internal/psaux.h (PS_Builder): Change `TT_Face'
to `FT_Face'.
Remove unused fields.
* src/psaux/psft.c: Update all accesses of `PS_Builder.face'.
Add some asserts to guard against casting `T1_Face' as `TT_Face'.
* src/type1/t1objs.h (T1_GlyphSlot): Reorder fields to follow
`CFF_GlyphSlot', so that we can pretend they are the same in the
interpreter.
* src/psaux/psobjs.c (ps_builder_init, ps_builder_add_point):
Updated with above changes.
Add some checks for Type 1 data passing through.
* src/psaux/psfont.h (CF2_Font): Add `isT1' flag.
* src/psaux/psfont.c (cf2_font_setup): Skip the variations and blend
code which is not applicable for Type 1.
* src/psaux/psft.c (cf2_decoder_parse_charstrings): Avoid accessing
`decoder->cff' in Type 1 mode.
Copy `is_t1' flag to `CF2_Font'.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c: Fix
switching between new and old engines.
* src/cff/cffgload.c, src/cff/cffparse.c: Update calls.
* src/psaux/psblues.c, src/psaux/psfont.c, src/psaux/psfont.h,
src/psaux/psft.c, src/psaux/psft.h, src/psaux/psintrp.c: Update all
to use new objects.
Make the new objects copy over values. They are essentially wrapper
types for the different decoders/builders.
* include/freetype/internal/psaux.h: Update declarations.
(PS_Builder): Add `is_t1' flag.
(PS_Decoder_{Get,Free}_Glyph_Callback): Renamed to...
(CFF_Decoder_{Get,Free}_Glyph_Callback: ... this.
(PS_Decoder): Updated.
Add `t1_parse_callback' member.
(PSAux_ServiceRec): Add `ps_decoder_init' member.
* src/psaux/psdecode.h, src/psaux/psobjs.h: Update declarations.
* src/psaux/psdecode.c, src/psaux/psobjs.c: Implement copy with two
modes.
* src/psaux/psauxmod.c: Add builder and decoder functions to `PSAux'
service.
Introduce `PS_Decoder' and `PS_Builder' which include all fields
from either Type 1 or CFF decoders/builders.
* include/freetype/internal/psaux.h (PS_Builder, PS_Decoder): New
structs.
* src/psaux/psobjs.c, src/psaux/psobjs.h: Add `PS_Builder'
functions.
* src/psaux/psdecode.c, src/psaux/psdecode.h: New files to hold
`PS_Decoder' initialization functions.
* src/psaux/psaux.c, src/psaux/Jamfile (_sources),
src/psaux/rules.mk (PSAUX_DRV_SRC): Updated.
Replace the `cf2' file name prefix with `ps' as the Adobe engine
will be used for both PostScript Types 1 and 2 (CFF) instead of just
CFF.
s/cf2/ps/ for all following.
* src/psaux/cf2*: Rename files.
* src/psaux/*: Update includes.
* src/psaux/Jamfile (_sources), src/psaux/rules.mk (PSAUX_DRC_SRC,
PSAUX_DRV_H): Update file references.
Use `MultiMasters' service in `psaux' instead of a call to `cff'.
The project builds if CFF_CONFIG_OPTION_OLD_ENGINE is not defined.
* src/psaux/cf2ft.c: Update includes.
(cf2_getNormalizedVector): Use `mm->get_var_blend' instead of
`cff_get_var_blend'.
NOTE: Does not compile!
Minor fix to allow both `cff' and `psaux' to use `cff_random'.
* src/cff/cffload.c (cff_random): Move to...
* src/psaux/psobjs.c: Here.
* src/cff/cffload.h: Move corresponding declaration to
`src/psaux/psobjs.h'.
* include/freetype/internal/psaux.h (PSAux_ServiceRec): Register the
function here...
* src/psaux/psauxmod.c: And here.
* src/cff/cffload.c, src/psaux/cf2intrp.c: Update code.
NOTE: Does not compile!
This is so that the CFF functions moved to `psaux' can access the
same structs that they need.
* src/cff/cfftypes.h: Moved to...
* include/freetype/internal/cfftypes.h: ...Here.
* src/cff/cffobjs.h: Moved the struct declarations to...
* include/freetype/internal/cffotypes.h: ... this new file.
* include/freetype/internal/internal.h (FT_INTERNAL_CFF_TYPES_H,
FT_INTERNAL_CFF_OBJECT_TYPES_H): New macros.
* src/cff/cffcmap.h, src/cff/cffdrivr.c, src/cff/cffgload.c,
src/cff/cffgload.h, src/cff/cffload.h, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/cff/cffparse.h, src/psaux/psobjs.h,
include/freetype/internal/psaux.h,
include/freetype/internal/services/svcfftl.h: Update includes.
* src/cff/rules.mk (CFF_DRV_H): Updated.
NOTE: Does not compile!
This is to allow CFF functions moved to `psaux' to call functions
declared in `src/cff/cffload.h'.
* include/freetype/internal/services/svcfftl.h: New file, setting up
a `CFFLoad' service.
* include/freetype/internal/ftserv.h (FT_DEFINE_SERVICEDESCREC10,
FT_DEFINE_SERVICEDESCREC): New macros.
(FT_SERVICE_CFF_TABLE_LOAD_H): New macro.
* src/cff/cffdrivr.c, src/cff/cffpic.h: Register the new service.
* src/cff/cfftypes.h (CFF_FontRec), src/psaux/cf2font.h
(CF2_FontRec): Add service interface.
* src/cff/cffobjs.c, src/psaux/cf2font.c, src/psaux/cf2ft.c,
src/psaux/cf2intrp.c, src/psaux/cffdecode.c: Use the new service.
NOTE: Does not compile!
* include/freetype/internal/psaux.h: Add function pointer
declarations.
* src/psaux/cffdecode.c (cff_decoder_init): Update to take in
callbacks.
* src/psaux/cffdecode.h: Ditto.
* src/cff/cffgload.c (cff_compute_max_advance, cff_slot_load):
Update calls to pass in callbacks.
* src/psaux/cf2ft.c, src/psaux/cffdecode.c: Use them.
NOTE: Does not compile!
* include/freetype/internal/psaux.h: Include
FT_INTERNAL_TRUETYPE_TYPES_H.
(CFF_Builder_FuncsRec, CFF_Decocer_FuncsRec): New function tables.
(CFF_Builder): Updated.
Fix for forward declaration.
(PSAux_ServiceRec): New field `cff_decoder_funcs'.
* src/psaux/psauxmod.c (cff_builder_funcs, cff_decoder_funcs): New
function tables.
(PSAux_Interface): Updated.
* include/freetype/internal/tttypes.h (TT_FaceRec): Add `psaux'
service interface.
* src/cff/cffgload.c, src/cff/cffobjs.c, src/cff/cffparse.c: Update
function calls to use psaux service.
This is the first patch of a sequence to move the Type 2 charstring
processing capability from the `cff' module to the `psaux' module.
NOTE: Does not compile!
* src/cff/cf2*: Move these files to...
* src/psaux/cf2*: Here.
* src/cff/Jamfile (_sources), src/cff/rules.mk (CFF_DRV_SRC,
CFF_DRV_H), src/cff/cff.c, src/cff/cffgload.c: Remove file
references.
* src/psaux/Jamfile (_sources), src/psaux/rules.mk, src/psaux/psaux.c
(PSAUX_DRV_SRC, PSAUX_DRV_H): Add file references.
Thing are simpler with a NULL-function pointer.
* include/freetype/internal/ftobjs.h (FT_Face_InternalRec): New
pointer to the filter function.
(FT_LibraryRec): Remove unused `lcd_filter'.
(FT_Bitmap_LcdFilterFunc, ft_lcd_filter_fir): Move from here...
* include/freetype/ftlcdfil.h (FT_Bitmap_LcdFilterFunc,
ft_lcd_filter_fir): ... to here.
* src/base/ftobjs.c (ft_open_face_internal): NULL-initialize the
per-face filter.
(FT_Face_Properties): Set it.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Simplify.
* src/base/ftlcdfil.c (ft_lcd_filter_fir, FT_Libary_SetLcdFilter):
Minor.
For GPOS pair positioning format 1 the description of ValueRecords
in the OpenType specification (1.8.2, from today) is wrong – the
offset has to be taken from the parent structure; in this case the
`PairSet' table.
* src/otvalid/otvgpos.c (otv_PairSet_validate): Set `extra3'.
(otv_PairPos_validate): Adjust.
Without this change, clang's AddressSanitizer reports many runtime
errors due to misaligned addresses.
* src/truetype/ttgxvar.c (TT_Get_MM_Var): Use multiples of pointer
size for sub-array offsets into `mmvar'.
* build/windows/vc2010/freetype.vcxproj: Use DynamicLibrary in Debug
and Release configurations.
* include/freetype/config/ftconfig.h (FT_EXPORT, FT_EXPORT_DEF)
[_DLL]: Use Visual C++ extensions.
1. If `FamilyName' is present in the CFF font, use this for
FT_Face's `family_name'.
2. Otherwise, use the face name and chop off any subset prefix.
3. If at this point FT_Face's `family_name' is set, use this
together with the full name to determine the style.
4. Otherwise, use `CIDFontName' as FT_Face's `family_name'.
5. If we don't have a valid style, use "Regular".
Previously, FT_Face's `family_name' entry for pure CFF fontdata
nearly always was the fontname itself, instead of the `FamilyName'
entry in the CFF font (assuming there is one).
* src/cff/cffobjs.c (cff_face_init) [pure_cff]: Implement it.
__builtin_shuffle() was introduced in gcc-4.7. The lowest
gcc to enable vector operation is delayed from 4.6 to 4.7.
* src/sfnt/pngshim.c (premultiply_data): Fix cpp-macro to
enable the vector operation, to change the lowest gcc version
from 4.6 to 4.7.
Improve the code by 5d3ff05615 ,
issues are found by Behdad Esfahbod and Werner Lemberg.
* src/cache/ftcbasic.c (FTC_ImageCache_Lookup): Replace
a subtraction to check higher bit by a bit operation,
and cpp-conditionalize for appropriate systems. Add better
documentation to the comment.
(FTC_ImageCache_LookupScaler): Ditto.
(FTC_SBitCache_Lookup): Ditto.
(FTC_SBitCache_LookupScaler): Ditto.
* src/autofit/afshaper.c: Include FT_ADVANCE_H, to use
FT_Get_Advance() in it.
* src/sfnt/ttcmap.c: Include FT_SERVICE_POSTSCRIPT_CMAPS_H
to use PS_Unicodes in it, also include `ttpost.h' to use
tt_face_get_ps_name() in it.
LastResort.dfont has a marginal resource ID 0xFFFF for sfnt
resource. Inside Macintosh: More Macintosh Toolbox, `Resource IDs'
(1-46), tells that some IDs are reserved and should not be used.
FreeType2 just uses resource ID to sort the fragmented resource.
To accept the marginal fonts, the checking is removed.
* src/base/ftrfork.c (FT_Raccess_Get_DataOffsets): Remove res_id
validity check, fix a trace message format.
The documentation of `FT_Bitmap_Convert' says that multiple calls do
proper reallocation of the target FT_Bitmap object. However, this
failed for the sequence
non-empty bitmap
empty bitmap
non-empty bitmap
Reason was that `FT_Bitmap_Convert' only reallocated the bitmap
buffer if it became too small; it didn't make the buffer smaller.
For an empty bitmap following a non-empty one, only the buffer
dimension got set to zero, without deallocation. If the next call
was a non-empty buffer again, an assertion in `ft_mem_qrealloc' was
triggered.
* src/base/ftbitmap.c (FT_Bitmap_Convert): Always reallocate target
buffer to the correct size.
* docs/CHANGES: Document it.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Use `SIZE' values if
`POINT_SIZE', `RESOLUTION_X', or `RESOLUTION_Y' properties are
missing.
* docs/CHANGES: Document it.
* src/sfnt/pngshim.c (premultiply_data): Use vectors instead of
scalars.
(vector_shuffle): New macro to take of a different built-in function
name on clang.
This reduces the overhead of `premultiply_data' by 60%.
* src/sfnt/pngshim.c (premultiply_data): Provide code which uses
gcc's (and clang's) `vector_byte' attribute to process 4 pixels at a
time.
Requested by Behdad.
Modern bitmap-only SFNTs like `NotoColorEmoji.ttf' don't contain
entries in the bitmap strike(s) for empty glyphs. Instead, they
rely that a space glyph gets created from the font's metrics data.
This commit makes FreeType behave accordingly.
* include/freetype/fterrdef.h (FT_Err_Missing_Bitmap): New error
code.
* src/sfnt/ttsbit.c (tt_sbit_decoder_load_image): Change error codes
to make a distinction between a missing bitmap in a composite and a
simple missing bitmap.
* src/truetype/ttgload.c (TT_Load_Glyph): For a missing bitmap (in a
bitmap-only font), synthesize an empty bitmap glyph if metrics are
available.
We now use a separate preprocessor macro to handle both definition
and declaration of the glyph name arrays.
* src/psnames/psmodule.c (DEFINE_PS_TABLE_DATA): New macro.
* src/tools/glnames.py (StringTable::dump,
StringTable::dump_sublist): Use `DEFINE_PS_TABLE_DATA'.
(dump_encoding): Ditto.
(main): Use `wb' mode for writing the output file, which works on
Windows also.
* src/psnames/pstables.h: Regenerated.
This is a new technology for LCD-optimized rendering. It capitalizes
on the fact that each color channel grid is shifted by a third of a
pixel. Therefore it is logical to render 3 separate monochrome
bitmaps shifting the outline by 1/3 pixel, and then combine them.
Importantly, the resulting output does not require additional LCD
filtering.
* src/smooth/ftsmooth.c (ft_smooth_render_generic)
[!FT_CONFIG_OPTION_SUBPIXEL_RENDERING]: Implement new LCD-optimized
rendering.
* include/freetype/ftlcdfil.h, include/freetype/freetype.h,
include/freetype/config/ftoption.h, devel/ftoption.h: Updated
documentation.
The reserved `flags' field got a value in OpenType version 1.8.2;
unfortunately, the public `FT_Var_Axis' structure misses the
corresponding element. Since we can't add a new field, we add an
access function.
* src/base/ftmm.c (FT_Get_Var_Axis_Flags): New function.
* include/freetype/ftmm.h (FT_VAR_AXIS_FLAG_HIDDEN): New macro.
Updated.
* src/truetype/ttgxvar.c (TT_Get_MM_Var): Increase allocated memory
of `mmvar' to hold axis flags.
Fill the axis flags array.
* docs/CHANGES: Updated.
Phantom points are now saved outside v40 backwards compatibility
mode. This fixes the jumping glyphs when switching between v35 and
v40 monochrome mode.
* src/truetype/ttgload.c (TT_Hint_Glyph): Fix inversed bool logic.
This fixes weird behavior of instructions that resulted in rendering
differences between v35 and v40 in monochrome mode, e.g., in
`timesbi.ttf'.
* src/truetype/ttinterp.c (Ins_GETINFO)
[TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL]: Check
`subpixel_hinting_lean'.
* src/sfnt/sfobjs.c (sfnt_load_face): The units per EM value has now
(tighter) limits.
* src/truetype/ttgload.c (load_truetype_glyph): The new OpenType
version explicitly allows all negative values for the number of
contours if we have a composite glyph (this is for better backwards
compatibility I guess), but it still recommends value -1.
While clang's sanitizer recommends a cast to unsigned for safe
negation (to handle -INT_MIN), both MSVC and Visualc emit warning
C4146 if an unsigned value gets negated.
* include/freetype/internal/ftcalc.h (NEG_LONG, NEG_INT32),
src/base/ftcalc.c (FT_MOVE_SIGN): Replace negation with a
subtraction.
* builds/unix/unix-def.in (PKG_CONFIG): New variable.
(freetype-config): Use it in sed expression.
* builds/unix/freetype-config.in: s/pkg-config/%PKG_CONFIG%/.
Reported by Nikolaus Waxweiler <madigens@gmail.com>.
* src/truetype/ttgxvar.c (TT_Set_Var_Design): Correctly handle the
case where we have less input coordinates than axes.
These versions don't produce run-time errors due to integer
overflow.
* include/freetype/internal/ftobjs.h: Include FT_INTERNAL_CALC_H.
(FT_PAD_ROUND_LONG, FT_PAD_CEIL_LONG, FT_PIX_ROUND_LONG,
FT_PIX_CEIL_LONG): New macros.
(FT_PAD_ROUND_INT32, FT_PAD_CEIL_INT32, FT_PIX_ROUND_INT32,
FT_PIX_CEIL_INT32): New macros.
* src/smooth/ftgrays.c [STANDALONE] (OVERFLOW_ADD_LONG,
OVERFLOW_SUB_LONG, OVERFLOW_MUL_LONG, NEG_LONG): New macros.
[!STANDALONE]: Include FT_INTERNAL_CALC_H.
(gray_render_cubic): Use those macros where appropriate.
Problem reported by Marek Kašík <mkasik@redhat.com>.
The problematic font that exceeds the old limit is Padauk-Bold,
version 3.002, containing bytecode generated by a buggy version of
ttfautohint.
This commit handles the new engine.
* include/freetype/internal/ftcalc.h (OVERFLOW_ADD_INT32,
OVERFLOW_SUB_INT32, OVERFLOW_MUL_INT32, NEG_INT, NEG_LONG,
NEG_INT32): New macros.
* src/cff/cf2ft.c (cf2_getScaleAndHintFlag): Use OVERFLOW_ADD_INT32.
* src/cff/cf2hints.c (cf2_getWindingMomentum, cf2_hint_init,
cf2_hintmap_map, cf2_glyphpath_hintPoint,
cf2_glyphpath_computeIntersection, cf2_glyphpath_computeOffset,
cf2_glyphpath_lineTo, cf2_glyphpath_curveTo): Use
OVERFLOW_ADD_INT32, OVERFLOW_SUB_INT32, OVERFLOW_MUL_INT32, and
NEG_INT32 where appropriate.
* src/cff/cf2intrp.c (cf2_doFlex, cf2_doBlend,
cf2_interpT2CharString): Ditto.
Also add some other code where needed to avoid overflow.
This commit handles the old engine.
* src/cff/cffgload.c: Include FT_INTERNAL_CALC_H.
(cff_decoder_parse_charstrings): Use OVERFLOW_ADD_LONG and
OVERFLOW_SUB_LONG where needed.
* src/cff/cffparse.c: Include FT_INTERNAL_CALC_H.
(power_ten_limits): New static array.
(do_fixed): Use it to prevent multiplication overflow.
(cff_parser_run): Use OVERFLOW_ADD_LONG.
* src/pcf/pcfread.c (pcf_get_accel): Add sanity checks for
`fontAscent' and `fontDescent'.
(pcf_load_font): Add sanity checks for global height.
Add sanity checks for AVERAGE_WIDTH, POINT_SIZE, PIXEL_SIZE,
RESOLUTION_X, and RESOLUTION_Y properties.
This commit (mainly for 32bit CPUs) is the first of a series of
similar commits to handle known integer overflows. Basically, all
of them are harmless, since they affect rendering of glyphs only,
not posing security threats. It is expected that fuzzying will show
up more overflows, to be fixed in due course.
The idea is to mark places where overflows can occur, using macros
that simply cast to unsigned integers, because overflow arithmetic
is well defined in this case. Doing so suppresses run-time errors
of sanitizers without adding computational overhead.
* include/freetype/internal/ftcalc.h (OVERFLOW_ADD_INT,
OVERFLOW_SUB_INT, OVERFLOW_MUL_INT, OVERFLOW_ADD_LONG,
OVERFLOW_SUB_LONG, OVERFLOW_MUL_LONG): New macros.
* src/base/ftcalc.c (FT_RoundFix, FT_CeilFix, FT_Matrix_Multiply,
FT_Matrix_Multiply_Scaled, FT_Vector_Transform_Scaled,
ft_corner_orientation): Use new macros.
* src/base/ftoutln.c (FT_Outline_Get_Orientation): Use new macros.
The new name better describes what the macro actually does;
additionally, we don't need a trailing `f' for literals (there was
only a single such instance in the code, but this caused a clang
warning because the macro itself uses `double' literals).
* src/cff/cf2blues.c, src/cff/cf2blues.h, src/cff/cf2fixed.h,
src/cff/cf2font.c, src/cff/cf2hints.c: Updated.
* src/base/ftcalc.c (FT_MOVE_SIGN): Add argument to pass unsigned
value, to be used as the result.
(FT_MulDiv, FT_MulDiv_No_Round, FT_DivFix, FT_MulFix,
FT_Vector_NormLen): Updated.
* src/truetype/ttgxvar.c (tt_set_mm_blend): Compute all design
coordinates if we have to create the `blends->coord' array.
(TT_Get_MM_Blend, TT_Get_Var_Design): Select default instance
coordinates if no instance is selected yet.
Tor Andersson