* builds/unix/install.mk: the installation now avoids installing
the internal headers, and removes existing ones if finds in the
target install directory
the warp hinter isn't active (it shouldn't, still experimental)
* Jamfile, include/freetype/config/ftmodule.h: removed "gxvalid"
and "otvalid" from the list of modules that are linked statically
to a given FreeType library. Functionality has been moved to the
"ftvalid" CVS module.
note also that current Make-based build system still compiles the
modules though...
* include/freetype/config/ftoption.h: added FT_STRICT_ALIASING,
which controls the definitions of the memory management functions
to avoid warnings with recent versions of GCC. this macro is
only here to be disabled, in case we detect problems with the
new scheme.
NOTE: disable macro to use the memory debugger. this will be fixed
later !!
when compiling the library.
* include/freetype/config/ftheader.h: remove inclusions of
internal headers, except if the macro FT2_BUILD_LIBRARY is defined.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
src/autofit/aftypes.h, src/autofit/afloader.c, src/autofit/autofit.c:
adding experimental implementation of "warp hinting" (new hinting
algorithm for gray-level and LCD rendering). It is disabled by default,
you need to #define AF_USE_WARPER in aftypes.h to enable it.
implement an AFM parser. It is used to parse an AFM file.
* src/psaux/psconv.c, src/psaux/psconv.h: New files to provide
conversion functions (e.g, PS real number => FT_Fixed) for the
PS_Parser and AFM_Parser. Some of the functions are taken, with some
modifications, from the psobjs.c
* src/psaux/psobjs.c: Use functions from psconv.c.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c:: Add
`AFM_Parser' to the `psaux' service.
* src/psaux/psaux.c, src/psaux/rules.mk: Include those new files.
* src/tools/test_afm.c: A test program for AFM parser.
* include/freetype/internal/services/svkern.h,
include/freetype/internal/ftserv.h: New service `Kerning'. It is
currently only used to get the track kerning information.
* src/type1/t1driver.c, src/type1/t1objs.c, src/type1/t1afm.c,
src/type1/t1afm.h: Update to use the AFM parser.
Provide the `Kerning' service.
* include/freetype/freetype.h, src/base/ftobjs.c: New API
`FT_Get_Track_Kerning'.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
(PCF_Glyph_Load), src/winfonts/winfnt.c (FNT_Load_Glyph): Don't set
the linear advance fields as they are only for the outline glyphs.
* include/freetype/freetype.h: Documentation updates/clarificatoins.
The meaning of FT_LOAD_FORCE_AUTOHINT is changed so that no real
change need be made to the code.
* src/base/ftobjs.c (FT_Load_Glyph): Resolve flag dependencies and
decide whether to use the auto-hinter according to documentation.
There should to be no real difference.
Some checks (e.g., is text height positve?) after the glyph is loaded.
(FT_Select_Size, FT_Request_Size): Scales are set to wrong values.
Be careful that scales won't be negative.
* src/bdf/bdfdrivr.c (BDF_Size_Request, BDF_Size_Select),
src/pcf/pcfdrivr.c (PCF_Size_Request, PCF_Size_Select),
src/winfonts/winfnt.c (FNT_Size_Request, FNT_Size_Select): Do size
matching for request of type NOMINAL and REAL_DIM.
* src/winfonts/winfnt.c (FNT_Face_Init): Print trace message when
`pixel_height' is used for nominal height.
* src/base/ftobjs.c (FT_Request_Size): Call `FT_Match_Size' if the
face is bitmap only and driver doesn't provide `request_size'. This
is added merely for completion as no driver satisfies the conditions.
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
* include/freetype/internal/services/svpscmap.h: Include
FT_INTERNAL_OBJECTS_H.
(PS_Unicode_Index_Func): Removed. Unused.
(PS_Macintosh_Name_Func): Renamed to...
(PS_Macintosh_NameFunc): This.
Update all callers.
(PS_Adobe_Std_Strings_Func): Renamed to...
(PS_Adobe_Std_StringsFunc): This.
Update all callers.
(PS_UnicodesRec): This is the former `PS_Unicodes' structure.
Add `cmap' member.
Update all callers.
(PS_Unicodes): This is now a typedef'd pointer to PS_UnicodesRec.
Update all callers.
(PS_Glyph_NameFunc): New typedef.
(PS_Unicodes_InitFunc): Change arguments to expect a function
and generic data pointer which returns a glyph name from a given
index.
* src/psnames/psmodule.c (ps_unicodes_init, ps_unicodes_char_index,
ps_unicodes_char_next, pscmaps_interface): Updated.
* include/freetype/internal/t1types.h (T1_FaceRec): Updated.
* src/psaux/t1cmap.h (T1_CmapStdRec): Updated.
(T1_CmapUnicode, T1_CmapUnicodeRec): Removed.
* src/psaux/t1cmap.c (t1_get_glyph_name): New callback function.
(t1_cmap_unicode_init, t1_cmap_unicode_done,
t1_cmap_unicode_char_index, t1_cmap_unicode_char_next,
t1_cmap_unicode_class_rec): Updated.
* src/type42/t42types.h (T42_FaceRec): Updated.
* include/freetype/internal/services/svpscmap.h (PS_UniMap): Use
FT_UInt32 for `glyph_index'.
(PS_Unicodes_InitFunc): Use FT_String for `glyph_names'.
(PS_Unicodes_CharIndexFunc): Use FT_UInt32 for `unicode'.
(PS_Unicodes_CharNextFunc): Make second argument a pointer to
FT_UInt32.
* src/psnames/psmodule.c (VARIANT_BIT, BASE_GLYPH): New macros.
(ps_unicode_value): Set VARIANT_BIT in return value if glyph is a
variant glyph (this is, it has non-leading `.' in its name).
(compare_uni_maps): Sort base glyphs before variant glyphs.
(ps_unicodes_init): Use FT_String for `glyph_names' argument.
Reallocate only if number of used entries is much smaller.
Updated to handle variant glyphs.
(ps_unicodes_char_index, ps_unicodes_char_next): Prefer base glyphs
over variant glyphs.
Simplify code.
* src/psaux/t1cmap.c (t1_cmap_uni_pair_compare): Removed.
(t1_cmap_unicode_init, t1_cmap_unicode_char_index,
t1_cmap_unicode_char_next): Use pscmap service.
(t1_cmap_unicode_done): Updated.
* src/psaux/t1cmap.h (T1_CMapUniPair): Removed.
(T1_CMapUnicode): Use PS_Unicodes structure.
correctly to generate the API reference in 'docs/reference'
* src/tools/docmaker/tohtml.py: update to output nicer fields lists
in the API reference
* src/base/ftobjs.c (FT_Load_Glyph): FT_LOAD_TARGET_LIGHT now
forces auto-hinting
* freetype/freetype.h: updating the documentation for
FT_LOAD_TARGET_XXX and FT_Render_Mode values
include/freetype/config/ftstdlib.h,
include/freetype/internal/tttypes.h,
src/sfnt/Jamfile, src/sfnt/rules.mk, src/sfnt/sfdriver.c,
src/sfnt/ttbdf.h, src/sfnt/ttbdf.c, src/sfnt/sfobjs.c:
Added support for an embedded 'BDF ' table within SFNT-based
bitmap font files. This is used to store atoms & properties from
the original BDF fonts that were used to generate the font file.
the feature is controled by TT_CONFIG_OPTION_BDF within 'ftoption.h'
and is used to implement FT_Get_BDF_Property for these font files.
At the moment, this is still experimental, the BDF table format isn't
cast into stone yet.
Werner Lemberg