* src/sfnt/ttcolr.c (FT_PaintFormat_Internal): New enumeration values
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_SKEW`,
`FT_COLR_PAINTFORMAT_INTERNAL_SKEW_CENTER`, and
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_SKEW_CENTER`.
(read_paint): Handle new enumeration values.
* src/sfnt/ttcolr.c (FT_PaintFormat_Internal): New enumeration values
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_ROTATE` and
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_ROTATE_CENTER`.
(read_paint): Handle new enumeration values.
* src/sfnt/ttcolr.c (FT_PaintFormat_Internal): New enumeration value
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_TRANSLATE`.
(read_paint): Handle new enumeration value.
* src/sfnt/ttcolr.c (FT_PaintFormat_Internal): New enumeration value
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_TRANSFORM`.
(read_paint): Handle new enumeration value.
* src/sfnt/ttcolr.c (read_paint) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Read and
apply deltas to radial, linear, and sweep gradient coordinates such as 'p0',
'p1', 'p2', 'center', 'radii', and 'angles'.
* include/freetype/ftcolor.h (FT_ColorStopIterator): Add field
`read_variable` to indicate whether a variation index base should be read.
* src/sfnt/ttcolr.c: (FT_PaintFormat_Internal): New enumerations
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_LINEAR_GRADIENT`
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_RADIAL_GRADIENT`, and
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_SWEEP_GRADIENT`.
(read_color_line): New parameter `read_variable`; update callers.
(read_paint): Handle new enumerations.
* src/sfnt/ttcolr.c (FT_PaintFormat_Internal_): New enumeration
`FT_COLR_PAINTFORMAT_INTERNAL_VAR_SOLID`.
(get_deltas_for_var_index_base) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: New
function to retrieve an array of delta values, which will be used for most
of 'COLR' v1 variation formats (in follow-up commits).
(read_paint): Add `face` parameter; update caller.
Handle `FT_COLR_PAINTFORMAT_INTERNAL_VAR_SOLID`.
The existing documentation comments on `FT_Stream_IoFunc` hinted at the dual
seek/read behavior required for custom stream implementations to work, but
it didn't explicitly explain it. Without looking at the internals of
FreeType, it was easy for someone to assume their implementation should
handle both seek and read operations all the time. If this is done, you get
a variety of errors, but mostly just `Unknown_File_Format` (error code
0x02).
* src/sfnt/ttcolr.c: Include `ttobjs.h` temporarily.
(VARIABLE_COLRV1_ENABLED): New temporary macro to detect whether variable
COLRv1 is enabled.
(Colr): New fields `var_store` and `delta_set_idx_map`.
(tt_face_load_colr, tt_face_free_colr) [VARIABLE_COLRV1_ENABLED]: Load and
free variation store data using the functions from the Multiple Masters
service.
If `FT_GlyphLoader_CreateExtra` returns an error (and a couple of other
places), `FT_GlyphLoader_CheckPoints` would propagate the error immediately,
rather than cleaning up the partially set up `FT_GlyphLoader`. As a
consequence, a subsequent attempt to create a glyph could result in a crash.
* src/base/ftgloadr.c (FT_GlyphLoader_CheckPoints): Ensure all the error
conditions exits are consistent, eventually calling `FT_GlyphLoader_Reset`.
FreeType can be located by consuming projects that use
`find_package(Freetype)` either via the old `MODULE` path (which uses
`FindFreetype.cmake` supplied by CMake), or via the new `CONFIG` path (which
uses `freetype-config.cmake` as supplied by this project). Up to this point
the CMake module has supplied the target `Freetype::Freetype` and the config
file provided by this project the target `freetype`. Now we supply both
`freetype` and `Freetype::Freetype` so that consuming projects can always
use the target `Freetype::Freetype` regardless of what path was taken by
`find_package(Freetype)`.
Fixes#1165.
This avoids regressing Blink layout tests and makes `FT_MulAdd_Fix` delta
retrieval implementation consistent with the previous implementation, which
used `FT_fixedToInt` and included rounding.
* src/base/ftcalc.c (FT_MulAdd_Fix): Implement it.
Also fix remaining `temp` initialization compilation issue.
Fixes#1169.
* include/freetype/internal/ftmmtypes.h (FT_ItemVarDelta): Make type
explicitly 32-bit.
* include/freetype/internal/services/svmm.h
(FT_Var_Get_Item_Delta_Func): Change return type to `FT_ItemVarDelta`
* truetype/ttgxvar.h (tt_var_get_item_delta): Change return type to
`FT_ItemVarDelta`.
* truetype/ttgxvar.c (tt_var_get_item_delta): Store scalars and deltas
to intermediate array, perform computation using new method
`FT_MulAddFix`.
This function, based on the code of `FT_MulFix`, uses 64-bit precision
internally for intermediate computations.
* include/freetype/internal/ftcalc.h, base/ftcalc.c (FT_MulAddFix):
Implement it.
This avoids cyclic subproject configuration when the 'harfbuzz' feature is
enabled, or `--wrap-mode=forcefallback` is used, but HarfBuzz is built as a
subproject. HarfBuzz does the same and disables HarfBuzz support when
configuring FreeType as a subproject.
* meson.build (harfbuzz_dep): Implement it.
* subprojects/harfbuzz.wrap: New file.
* .gitlab-ci.yml [windows meson]: Use latest version of the meson 0.59
series, which has a necessary bug fix to make CI work.
This formalizes that the phantom points appended in the outline
do not increase its point count, nor are they tagged or included
in any additional contours. Only their coordinates are stored.
They are counted in the glyph zone, however.
* src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): Infer `n_points`
from the outline size plus four phantom points.
* src/truetype/ttgxvar.h (TT_Vary_Apply_Glyph_Deltas): Remove this
argument.
* src/truetype/ttgload.c (tt_prepare_zone): Add phantom four.
(TT_Process_Simple_Glyph, load_truetype_glyph): Update all callers.
This moves phantom point and advance variation adjustment next to
calculations. The logic stays the same, HVAR and VVAR take priority.
* src/truetype/ttgload.c (load_truetype_glyph): Move it from here...
* src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): ... to here
and check for HVAR and VVAR presence outside the main loop.
`FT_READ_LONG`, `FT_GET_LONG`, and related macros did not return
negative values when `long` is more than 32 bits. `FT_Stream_ReadULong`
would read four bytes into the LSB of an `FT_ULong` and return that.
Since this can never set the MSb of the `FT_ULong` when `FT_ULong` is
more than 32 bits the cast to `FT_Long` never resulted in a negative
value.
Fix this by modifying `FT_Stream_Read*` to return a type of the same
size as the bytes it is reading and changing the `FT_READ_*` and
`FT_GET_*` macros to cast to the same type returned by `FT_Stream_Read*`
but with the correctly signed type (instead of casting to what is
assumed to be the type of `var` which will happen automatically anyway).
There exist a few cases like with the `OFF3` variants where there isn't
generally a type with the correct size. `FT_PEEK_OFF3` works around this
loading the bytes into the three most significant bits and then doing a
signed shift down. `FT_NEXT_OFF3` also already worked correctly by
casting this signed value to another signed type. `FT_Stream_GetUOffset`
works correctly but one must be careful not to attempt to cast the
returned value to a signed type. Fortunately there is only
`FT_GET_UOFF3` and no `FT_GET_OFF3`.
All of these cases are handled correctly when reading values through
`FT_Stream_ReadFields` since it generically computes the signed value
through an `FT_Int32`. This change is essentially doing the same for
these macros.
* include/freetype/internal/ftstream.h (FT_NEXT_*, FT_GET_*, FT_READ*):
Update macros and return types to use fixed size types for fixed size
values.
* src/base/ftstream.c (FT_StreamGet*, FT_StreamRead*): Dito.
Issue: #1161
This code originally just searched for `eexec`. This was later modified
to check that the `eexec` found is valid (not in a string or comment).
This was done by searching for `eexec` as before and then, for each
`eexec` found, searching from the beginning using the correct parsing to
see if the `eexec` was still found. If the private dictionary is large
and contains many copies of `eexec` which are not valid, the initial
part of the private dictionary is scanned once for each, potentially
leading to n^2 parsing time.
Instead of finding an initial `eexec` and then re-parsing to discover if
it is valid, drop the initial search for `eexec` and just parse to find
a valid `eexec`. This is strictly faster since the validation must
happen anyway and avoids restarting from the beginning each time an
`eexec` is found in the data.
* src/type1/t1parse.c (T1_Get_Private_Dict): avoid n^2 parsing
Bug: https://bugs.chromium.org/p/chromium/issues/detail?id=1328883
* src/truetype/ttgload.c (TT_Process_Simple_Glyph, load_truetype_glyph):
Move the advance adjustment from here...
* src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): ... to here and
simplify arguments.
* src/truetype/ttgxvar.h (TT_Vary_Apply_Glyph_Deltas): Update prototype
with fewer arguments.
When `inflate` returns `Z_NEED_DICT` this is currently not reported as
an error and callers may assume that the decompression succeeded when it
did not. In particular, a compressed table in a woff file may not
actually be decompressed and written as expected, leaving the backing
memory for the expanded table uninitialized.
* src/gzlip/ftgzip.c (FT_Gzip_Uncompress): treat `Z_NEED_DICT` as
indicating invalid data since there is no means to provide a dictionary.
Bug: https://bugs.chromium.org/p/chromium/issues/detail?id=1335712
Fixes#1164 by using a volatile variable around `setjmp`. It is hard to
say how this fixes crashes related to certain link-time optimizations.
This does not decrease the rendering performance.
* src/smooth/ftgrays.c (gray_convert_glyph_inner): Use volatile `error`.
* include/freetype/freetype.h (FT_GlyphSlotRec_): update doc
* src/cff/cffgload.c (cff_slot_load): do it
* src/truetype/ttgload.c (TT_Load_Glyph): do it
Fixes: #1156
This issue was discovered with an SVG based font with some documents
compressed and other uncompressed. After loading the first compressed
document the ownership flag on the glyph slot was set to true but never
set to false. As a result after loading a compressed document a glyph
from an uncompressed document would load fine, but when this glyph slot
was cleared it would try to free its document resulting in a wild free.
* src/base/ftobjs.c (ft_glyphslot_clear): clear correct flags
Fixes: #1162
Anurag Thakur