==========================
Tag sources with `VER-2-3-10'.
* builds/toplevel.mk (major, minor, patch): Fix regexp to allow more
than a single digit.
(dist): We now use git.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.10.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.9/2.3.10/, s/239/2310/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 10.
* builds/unix/configure.raw (version_info): Set to 9:21:3.
This was broken since version 2.3.0.
* src/raster/ftraster.c (count_table): Use pre-2.3.0 values (which
were then computed dynamically).
(Vertical_Gray_Sweep_Step): Updated.
(ft_black_render): Initialize `worker->gray_lines' (problem found by
valgrind).
(FT_RASTER_OPTION_ANTI_ALIASING, DEBUG_RASTER): Dont' #undef, just
comment out.
The calculation of `vertBearingX' is not defined in the OTF font
spec so FreeType does a `best effort' attempt. However, this value
is defined in the PDF and PostScript specs, and that algorithm is
better than the one FreeType currently uses:
FreeType: Use the middle of the bounding box as the X coordinate
of the vertical origin.
Adobe PDF spec: Use the middle of the horizontal advance vector as
the X coordinate of the vertical origin.
FreeType's algorithm goes wrong if you have a really small glyph
(like the full-width, circle-like dot at the end of the sentence, as
used in CJK scripts) with large bearings. With the FreeType
algorithm this dot gets centered on the baseline; with the PDF
algorithm it gets the correct location (in the top right). Note
that this is a serious issue, it's like printing the dot at the end
of a Roman sentence at the center of the textline instead of on the
baseline like it should. So i believe the PDF spec's algorithm
should be used in FreeType as well.
The `vertBearingY' value for such small glyphs is also very strange
if no `vmtx' information is present, since the height of the bbox is
not representable for the height of the glyph visually (the
whitespace up to the baseline is part of the glyph). The fix also
includes some code for a better estimate of `vertBearingY'.
* src/base/ftobjs.c (ft_synthesize_vertical_metrics): `vertBearingX'
is now calculated as described by the Adobe PDF Spec. Estimate for
`vertBearingY' now works better for small glyphs completely above or
below the baseline into account.
* src/cff/cffgload.c (cff_slot_load): `vertBearingX' is now
calculated as described by the Adobe PDF Spec. Vertical metrics
information was always ignored when FT_CONFIG_OPTION_OLD_INTERNALS
was not defined.
* src/truetype/ttgload.c (compute_glyph_metrics): `vertBearingX' is
now calculated as described by the Adobe PDF Spec.
* include/freetype/internal/t1types.h (T1_EncodingRecRec_): Update
comment to reflect revised code_last meaning.
* src/type1/t1load.c (T1_Open_Face), src/type42/t42objs.c
(T42_Open_Face): Assign max_char as highest character code + 1 and
use this for T1_EncodingRecRec_::code_last.
* src/psaux/t1cmap.c (t1_cmap_custom_init): Follow revised
T1_EncodingRecRec_::code_last meaning.
Bug reported by Ivan Nincic <inincic@pdftron.com>.
* src/cff/cffgload.c (cff_slot_load): Thinko: Check `xx' element of
`font_matrix' also.
* docs/CHANGES: Updated.
* src/truetype/ttobjs.c (tt_size_init_bytecode): Don't reset x_ppem
and y_ppem. Otherwise the `*_CVT_Stretched' functions in ttinterp.c
get never called.
An anonymous guy suggested this change on Savannah, and it seems to
be the right solution.
This fixes Savannah bug #26867.
Previously, only integers have been used which can lead to serious
rounding errors.
However, fractional values are only used internally; after the
charstrings (of either Type 1 or 2) have been processed, the
resulting coordinates get rounded to integers currently -- before
applying scaling. This should be fixed; at the same time a new load
flag should be introduced, to be used in combination with
FT_LOAD_NO_SCALE, which indicates that font units are returned in
16.16 format. Similarly, the incremental interface should be
extended to allow fractional values for metrics.
* include/freetype/internal/psaux.h (T1_BuilderRec): Remove `shift'
field.
* include/freetype/internal/pshints.h (T1_Hints_SetStemFunc,
T1_Hints_SetStem3Func): Use FT_Fixed for coordinates.
* src/psaux/psobjs.c: Include FT_INTERNAL_CALC_H.
(t1_build_add_point): Always convert fixed to integer.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Use 16.16 format everywhere (except for large integers followed by a
`div').
[CAN_HANDLE_NON_INTEGRAL_T1_OPERANDS]: Remove #ifdef and activate
code uncoditionally.
Add support for random numbers and update remaining code
accordingly; this should work now.
(t1_operator_seac): Updated.
* src/psaux/pshrec.c: Include FT_INTERNAL_CALC_H.
(ps_hints_t1stem3, t1_hints_stem): Updated.
* src/cid/cidgload.c: Include FT_INTERNAL_CALC_H.
(cid_load_glyph) [FT_CONFIG_OPTION_INCREMENTAL],
(cid_face_compute_max_advance, cid_slot_load_glyph): Updated.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String)
[FT_CONFIG_OPTION_INCREMENTAL], (T1_Get_Advances, T1_Load_Glyph):
Updated.
* src/type1/t1load.c: Include FT_INTERNAL_CALC_H.
* src/type1/t1objs.c (T1_Face_Init): Updated.
Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
Two new constraints are introduced to better identify a `stub' -- a
concept which is only vaguely described in the OpenType
specification. The old code was too rigorous and suppressed more
pixel than it should.
. The intersection of the two profiles with the scanline is less
than a half pixel. Code related to this was already present in
the sources but has been commented out.
. The endpoint of the original contour forming a profile has a
distance (`overshoot') less than half a pixel to the scanline.
Note that the two additional conditions fix almost all differences
to the Windows rasterizer, but some problematic cases remain.
* src/raster/ftraster.c (Overshoot_Top, Overshoot_Bottom): New
macros for the `flags' field in the `TProfile' structure.
(IS_BOTTOM_OVERSHOOT, IS_TOP_OVERSHOOT): New macros.
(New_Profile, End_Profile): Pass overshoot flag as an argument and
set it accordingly.
Update callers.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop): Implement the two new
constraints.
* src/raster/ftraster.c (Set_High_Precision): Add two more bits to
the precision. This corrects rendering of some small glyphs, for
example, glyph `xi' in verdana.ttf at 13 ppem. Testing with ftbench
on my GNU/Linux box I don't see a performance degradation.
Suggested by Alexei Podtelezhnikov <apodtele@gmail.com>.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Do it.
* src/raster/ftraster.c (TFlow): Replace enumeration with...
(Flow_Up): This macro.
(TProfile): Replace `flow' member with `flags' bit field.
Update all affected code.
* src/base/ftobjs.c (FT_Load_Glyph): Alter check for permitted
matrices to allow rotations by multiples of 90°, not only unrotated,
possibly slanted matrices.
Reported by Krzysztof Kowalczyk <kkowalczyk@gmail.com>.
* src/autofit/aflatin2.c (af_latin2_hint_edges): Move declaration of
`n_edges' into `#if' block.
Reported by Krzysztof Kowalczyk <kkowalczyk@gmail.com>.
* src/pcf/pcfdrivr.c (PCF_Face_Init) [!FT_CONFIG_OPTION_USE_ZLIB]:
Make it work.
Simplify #ifdef logic.
Problem reported by Krzysztof Kotlenga <pocek@users.sf.net>.
* src/raster/raster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): For smart drop-out mode, if
intersections are equally distant relative to next pixel center,
select the left pixel, not the right one.
This fixes FreeDesktop bug #21197.
* src/autofit/afglobal.c (AF_DIGIT): New macro.
(af_face_globals_compute_script_coverage): Mark ASCII digits in
`glyph_scripts' array.
(af_face_globals_get_metrics): Updated.
(af_face_globals_is_digit): New function.
* src/autofit/afglobal.h: Updated.
(AF_ScriptMetricsRec): Add `digits_have_same_width' flag.
* src/autofit/aflatin.c: Include FT_ADVANCES_H.
(af_latin_metrics_check_digits): New function.
(af_latin_metrics_init): Use it.
* src/autofit/aflatin.h: Updated.
* src/autofit/afcjk.c (af_cjk_metrics_init): Updated.
* src/autofit/aflatin2.c: Similar changes as with aflatin.c.
* src/autofit/afloader.c (af_loader_load_g): Test digit width.
* docs/CHANGES: Document it.
Problems reported by suyu@cooee.cn.
* src/smooth/ftgrays.c (FT_DEFINE_OUTLINE_FUNCS,
FT_DEFINE_RASTER_FUNCS) [_STANDALONE_]: Define.
[!_STANDALONE_]: Include ftspic.h only here.
(ras): Define/declare after definition of `TWorker'.
Use `RAS_VAR_' where necessary.
* include/freetype/internal/autohint.h add macros to init
instances of FT_AutoHinter_ServiceRec.
* src/autofit/afmodule.h declare autofit_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/autofit/afmodule.c when FT_CONFIG_OPTION_PIC is defined
af_autofitter_service and autofit_module_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from afpic.h in order to access them.
* src/autofit/aftypes.h add macros to init and declare
instances of AF_ScriptClassRec.
* src/autofit/afcjk.h declare af_cjk_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afcjk.c when FT_CONFIG_OPTION_PIC is defined
af_cjk_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/afdummy.h declare af_dummy_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afdummy.c when FT_CONFIG_OPTION_PIC is defined
af_dummy_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/afindic.h declare af_indic_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afindic.c when FT_CONFIG_OPTION_PIC is defined
af_indic_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/aflatin.h declare af_latin_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/aflatin.c when FT_CONFIG_OPTION_PIC is defined
af_latin_script_class struct will have function to init it instead of
being allocated in the global scope.
Change af_latin_blue_chars to be PIC-compatible by being a two
dimentional array rather than array of pointers.
* src/autofit/aflatin2.h declare af_latin2_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/aflatin2.c when FT_CONFIG_OPTION_PIC is defined
af_latin2_script_class struct will have function to init it instead of
being allocated in the global scope.
Change af_latin2_blue_chars to be PIC-compatible by being a two
dimentional array rather than array of pointers.
* src/autofit/afglobal.c when FT_CONFIG_OPTION_PIC is defined
af_script_classes array initialization was moved to afpic.c and
is later refered using macros defeined in afpic.h.
New Files:
* src/autofit/afpic.h declare struct to hold PIC globals for autofit
module and macros to access them.
* src/autofit/afpic.c implement functions to allocate, destroy and
initialize PIC globals for autofit module.
* src/autofit/autofit.c add new file to build: afpic.c.
* src/autofit/jamfile add new files to FT2_MULTI build: afpic.c.
* include/freetype/internal/pshints.h add macros to init
instances of PSHinter_Interface.
* src/pshinter/pshmod.h declare pshinter_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/pshinter/pshmod.c when FT_CONFIG_OPTION_PIC is defined
pshinter_interface and pshinter_module_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from pshpic.h in order to access them.
New Files:
* src/pshinter/pshpic.h declare struct to hold PIC globals for pshinter
module and macros to access them.
* src/pshinter/pshpic.c implement functions to allocate, destroy and
initialize PIC globals for pshinter module.
* src/pshinter/pshinter.c add new file to build: pshpic.c.
* src/pshinter/jamfile add new files to FT2_MULTI build: pshpic.c.
* include/freetype/internal/services/svpscmap.h add macros to init
instances of FT_Service_PsCMapsRec.
* src/psnames/psmodule.h declare psnames_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/psnames/psmodule.c when FT_CONFIG_OPTION_PIC is defined
pscmaps_interface and pscmaps_services structs
and psnames_module_class array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from pspic.h in order to access them.
New Files:
* src/psnames/pspic.h declare struct to hold PIC globals for psnames
module and macros to access them.
* src/psnames/pspic.c implement functions to allocate, destroy and
initialize PIC globals for psnames module.
* src/psnames/psnames.c add new file to build: pspic.c.
* src/psnames/jamfile add new files to FT2_MULTI build: pspic.c.
* src/raster/ftrend1.h declare ft_raster1_renderer_class
and ft_raster5_renderer_class
using macros from ftrender.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/smooth/ftrend1.c when FT_CONFIG_OPTION_PIC is defined
ft_raster1_renderer_class and ft_raster5_renderer_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
Macros will be used from rastpic.h in order to access
ft_standard_raster from the pic_container (allocated in ftraster.c).
In ft_raster1_render when PIC is enabled, the last letter of
module_name is used to verfy the renderer class rather than the
class pointer.
* src/raster/ftraster.c when FT_CONFIG_OPTION_PIC is defined
ft_standard_raster struct will have function to init it
instead of being allocated in the global scope.
New Files:
* src/raster/rastpic.h declare struct to hold PIC globals for raster
renderer and macros to access them.
* src/raster/rastpic.c implement functions to allocate, destroy and
initialize PIC globals for raster renderer.
* src/raster/raster.c add new file to build: rastpic.c.
* src/raster/jamfile add new files to FT2_MULTI build: rastpic.c.
* src/smooth/ftsmooth.h declare ft_smooth_renderer_class,
ft_smooth_lcd_renderer_class and ft_smooth_lcd_v_renderer_class
using macros from ftrender.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/smooth/ftsmooth.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
ft_smooth_renderer_class, ft_smooth_lcd_renderer_class
and ft_smooth_lcd_v_renderer_class
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ftspic.h in order to access
ft_grays_raster from the pic_container (allocated in ftgrays.c).
* src/smooth/ftgrays.h include FT_CONFIG_CONFIG_H
* src/smooth/ftgrays.c when FT_CONFIG_OPTION_PIC is NOT defined
func_interface was moved from gray_convert_glyph_inner function
to the global scope.
When FT_CONFIG_OPTION_PIC is defined
func_interface and ft_grays_raster structs
will have functions to init them
instead of being allocated in the global scope.
And func_interface will be allocated on the stack of
gray_convert_glyph_inner.
New Files:
* src/smooth/ftspic.h declare struct to hold PIC globals for smooth
renderer and macros to access them.
* src/smooth/ftspic.c implement functions to allocate, destroy and
initialize PIC globals for smooth renderer.
* src/smooth/smooth.c add new file to build: ftspic.c.
* src/smooth/jamfile add new files to FT2_MULTI build: ftspic.c.
* include/freetype/internal/services/svcid.h add macros to init
instances of FT_Service_CIDRec.
* include/freetype/internal/services/svpsinfo.h add macros to init
instances of FT_Service_PsInfoRec.
* src/cff/cffcmap.h declare cff_cmap_encoding_class_rec
and cff_cmap_unicode_class_rec using macros from
ftobjs.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/cff/cffcmap.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
cff_cmap_encoding_class_rec and cff_cmap_unicode_class_rec
will have functions to init or create and destroy them
instead of being allocated in the global scope.
* src/cff/cffdrivr.h declare cff_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/cff/cffdrivr.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
cff_service_glyph_dict, cff_service_ps_info, cff_service_ps_name
cff_service_get_cmap_info, cff_service_cid_info, cff_driver_class,
and cff_services array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from cffpic.h in order to access them
from the pic_container.
Use macros from cffpic.h in order to access the
structs allocated in cffcmap.c
* src/cff/cffobjs.c Use macros from cffpic.h in order to access the
structs allocated in cffcmap.c
* src/cff/parser.c when FT_CONFIG_OPTION_PIC is defined
implement functions to create and destroy cff_field_handlers array
instead of being allocated in the global scope.
And macros will be used from cffpic.h in order to access it
from the pic_container.
New Files:
* src/cff/cffpic.h declare struct to hold PIC globals for cff
driver and macros to access them.
* src/cff/cffpic.c implement functions to allocate, destroy and
initialize PIC globals for cff driver.
* src/cff/cff.c add new file to build: cffpic.c.
* src/cff/jamfile add new files to FT2_MULTI build: cffpic.c.
* include/freetype/internal/services/svbdf.h add macros to init
instances of FT_Service_BDFRec.
* include/freetype/internal/services/svgldict.h add macros to init
instances of FT_Service_GlyphDictRec.
* include/freetype/internal/services/svpostnm.h add macros to init
instances of FT_Service_PsFontNameRec.
* include/freetype/internal/services/svsfnt.h add macros to init
instances of FT_Service_SFNT_TableRec.
* include/freetype/internal/services/svttcmap.h add macros to init
instances of FT_Service_TTCMapsRec.
* include/freetype/internal/sfnt.h add macros to init
instances of SFNT_Interface.
* src/sfnt/sfdriver.h declare sfnt_module_class using macros from
ftmodapi.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/sfnt/sfdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
sfnt_service_sfnt_table, sfnt_service_glyph_dict, sfnt_service_ps_name
tt_service_get_cmap_info, sfnt_service_bdf, sfnt_interface,
sfnt_module_class, and sfnt_services array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from sfntpic.h in order to access them
from the pic_container.
* src/sfnt/ttcmap.h add macros to init
instances of TT_CMap_ClassRec.
* src/sfnt/ttcmap.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_cmap0_class_rec, tt_cmap2_class_rec, tt_cmap4_class_rec
tt_cmap6_class_rec, tt_cmap8_class_rec, tt_cmap10_class_rec,
tt_cmap12_class_rec, tt_cmap14_class_rec and tt_cmap_classes array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from sfntpic.h in order to access them
from the pic_container.
The content of tt_cmap_classes is now described in the
new file 'ttcmapc.h'.
New Files:
* src/sfnt/sfntpic.h declare struct to hold PIC globals for sfnt
driver and macros to access them.
* src/sfnt/sfntpic.c implement functions to allocate, destroy and
initialize PIC globals for sfnt driver.
* src/sfnt/ttcmapc.h describing the content of
tt_cmap_classes allocated in ttcmap.c
* src/sfnt/sfnt.c add new file to build: sfntpic.c.
* src/sfnt/jamfile add new files to FT2_MULTI build: sfntpic.c.
* include/freetype/internal/services/svmm.h add macros to init
instances of FT_Service_MultiMastersRec.
* include/freetype/internal/services/svttglyf.h add macros to init
instances of FT_Service_TTGlyfRec.
* src/truetype/ttdriver.h declare tt_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/truetype/ttdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_service_gx_multi_masters, tt_service_truetype_glyf, tt_driver_class
and tt_services array,
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ttpic.h in order to access them
from the pic_container.
* src/truetype/ttobjs.c change trick_names array to be
PIC-compatible by being a two dimentional array rather than array
of pointers.
New Files:
* src/truetype/ttpic.h declare struct to hold PIC globals for truetype
driver and macros to access them.
* src/truetype/ttpic.c implement functions to allocate, destroy and
initialize PIC globals for truetype driver.
* src/truetype/truetype.c add new file to build: ttpic.c.
* src/truetype/jamfile add new files to FT2_MULTI build: ttpic.c.
* include/freetype/config/ftoption.h add FT_CONFIG_OPTION_PIC
* include/freetype/internal/ftobjs.h Add pic_container member to
FT_LibraryRec.
Add macros to declare and init instances of FT_CMap_ClassRec.
Add macros to init instances of FT_Outline_Funcs and FT_Raster_Funcs.
Add macros to declare, allocate and initialize modules
(FT_Module_Class).
Add macros to declare, allocate and initialize renderers
(FT_Renderer_Class).
Add macro to init instances of FT_Glyph_Class.
Add macros to declare, allocate and initialize drivers
(FT_Driver_ClassRec).
* include/freetype/internal/ftpic.h new file to declare the
FT_PIC_Container struct and the functions to allocate and detroy it.
* include/freetype/internal/ftserv.h add macros to allocate and
destory arrays of FT_ServiceDescRec.
* include/freetype/internal/internal.h define macro to include
ftpic.h.
New Files:
* src/base/ftpic.c implement functions to allocate and destory the
global pic_container.
* src/base/basepic.h declare struct to hold PIC globals for base and
macros to access them.
* src/base/basepic.c implement functions to allocate, destroy and
initialize PIC globals for base.
* src/base/ftinit.c when FT_CONFIG_OPTION_PIC is defined implement
functions that allocate and destroy ft_default_modules according to
FT_CONFIG_MODULES_H in the pic_container instead of the global scope
and use macro from basepic.h to access it.
* src/base/ftobjs.c add calls to the functions that allocate and
destroy the global pic_container when the library is created and
destroyed.
* src/base/jamfile add new files to FT2_MULTI build:
ftpic.c and basepic.c.
* src/base/ftbase.c add new files to build:
ftpic.c and basepic.c.
* src/base/ftglyph.c when FT_CONFIG_OPTION_PIC is defined
ft_bitmap_glyph_class and ft_outline_glyph_class will be allocated
in the pic_container instead of the global scope and use macros from
basepic.h to access them.
* src/base/ftbbox.c allocate bbox_interface stract on the stack
instead of the global scope when FT_CONFIG_OPTION_PIC is defined.
* src/base/ftstroke.c access ft_outline_glyph_class allocated in
ftglyph.c via macros from basepic.h
* src/cff/cffload.c, src/cff/cffload.h, src/cff/cffobjs.c,
src/cff/cffparse.c, src/cff/cffparse.h: Add library pointer to
'CFF_ParserRec' set by `cff_parser_init'.
Route library pointer from 'cff_face_init' to 'cff_subfont_load'
for `cff_parser_init'.
* src/cff/cffparse.c (CFF_Field_Handler): Move it to...
* src/cff/cffparse.h: This file, to be used by other C files.
Problem reported by Tavis Ormandy <taviso@google.com>.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Don't allow
`width' or `pitch' to be larger than 0xFFFF.
* include/freetype/ftcid.h (FT_Get_CID_Is_Internally_CID_keyed,
FT_Get_CID_From_Glyph_Index): New functions.
* include/freetype/internal/services/svcid.h
(FT_CID_GetIsInternallyCIDKeyedFunc,
FT_CID_GetCIDFromGlyphIndexFunc): New function typedefs.
(CID Service): Use them.
* src/base/ftcid.c: Include FT_CID_H.
(FT_Get_CID_Is_Internally_CID_keyed, FT_Get_CID_From_Glyph_Index):
New functions.
* src/cff/cffdrivr.c (cff_get_is_cid, cff_get_cid_from_glyph_index):
New functions.
(cff_service_cid_info): Add them.
* src/cff/cffload.c (cff_font_load): Don't free `font->charset.sids'
-- it is needed for access as a CID-keyed font. It gets deleted
later on.
* src/cid/cidriver.c (cid_get_is_cid, cid_get_cid_from_glyph_index):
New functions.
(cid_service_cid_info): Add them.
* docs/CHANGES: Updated.
We now simply check for a valid `offset', no longer handling `delta
= 1' specially.
* src/sfnt/ttcmap.c (tt_cmap4_validate): Don't check `delta' for
last segment.
(tt_cmap4_set_range, tt_cmap4_char_map_linear,
tt_cmap4_char_map_binary): Check offset.
* src/builds/win32: Remove files for WinCE.
Move VC 2005 support to a separate directory.
Add directory for VC 2008 support.
* src/builds/wince: New directory hierarchy for WinCE compilers
(VC 2005 and VC 2008).
This patch fixes the following problems in ttsbit0.c:
. Bitmaps for compound glyphs were never allocated.
. `SBitDecoder' refused to load metrics if some other metrics have
already been loaded. This condition certainly makes no sense for
recursive calls, so I've just disabled it. Another possibility
would be resetting `decoder->metrics_loaded' to false before
loading each composite component. However, we must restore the
original metrics after finishing the recursion; otherwise we can
get a misaligned glyph.
. `tt_sbit_decoder_load_bit_aligned' incorrectly handled `x_pos',
causing some glyph components to be shifted too far to the right
(especially noticeable for small sizes).
Note that support for grayscale bitmaps (not necessarily compound) is
completely broken in ttsbit0.c.
* src/sfnt/tt_sbit_decoder_load_metrics: Always load metrics.
(tt_sbit_decoder_load_bit_aligned): Handle `x_pos' correctly in case
of `h == height'.
(tt_sbit_decoder_load_compound): Reset metrics after loading
components.
Allocate bitmap.
Closes Savannah BUG #25750
* src/sfnt/ttkern.c (tt_face_get_kerning): fix a bug
where a malformed table would be succesfully loaded but
later crash the engine during parsing.
* include/freetype/freetype.h: bump patch version to 9
* docs/CHANGES: document the ABI break in 2.3.8
* docs/VERSION.DLL: update version numbers table for 2.3.9
* builds/unix/configure.ac: update AC_INIT and version_info
numbers.
Instead, we define a new internal PS_FontExtraRec structure to
hold the additionnal field, then place it in various internal
positions of the corresponding FT_Face derived objects.
The main cycle in `blit_sbit' makes too many iterations: it actually
needs the count of lines in the source bitmap rather than in the
target image.
* src/sfnt/ttsbit.c (blit_sbit) [FT_CONFIG_OPTION_OLD_INTERNALS]:
Add parameter `source_height' and use it for main loop.
(Load_SBit_Single) [FT_CONFIG_OPTION_OLD_INTERNALS]: Updated.
* src/sfnt/sfobjs.c (sfnt_load_face): Test for bitmap strikes before
setting metrics and bbox values. This ensures that the check for a
font with neither a `glyf' table nor bitmap strikes can be performed
early enough to set metrics and bbox values too.
* include/freetype/config/ftconfig.h (FT_MulFix_i386): Make
assembler code work with gcc 2.95.3 (as used by the Haiku project).
Add `cc' register to the clobber list.
=========================
Tag sources with `VER-2-3-8'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.8.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.7/2.3.8/, s/237/238/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 8.
* builds/unix/configure.raw (version_info): Set to 9:19:3.
* docs/release: Updated.
* src/psaux/psobjs.c (ps_parser_load_field_table): Don't handle
`count_offset' if it is zero (i.e., unused). Otherwise, the first
element of the structure which holds the data is erroneously
modified. Problem reported by Chi Nguyen <chint@necsv.com>.
* builds/unix/configure.raw: Don't call AC_CANONICAL_BUILD and
AC_CANONICAL_TARGET and use $host_os only. A nice explanation for
this change can be found at
http://blog.flameeyes.eu/s/canonical-target.
From Savannah patch #6712.
src/smooth/ftgrays.c, src/base/ftobjc.s, src/sfobjs.c:
s/_Err_Bad_Argument/_Err_Invalid_Argument/. The former is for
errors in the bytecode interpreter only.
extern const FT_Module_Class
(or similar for C++). However, the actual types of the variables
being declared are often different, e.g., FT_Driver_ClassRec or
FT_Renderer_Class. (Some are, indeed, FT_Module_Class.)
This works with most C compilers (since those structs begin with an
FT_Module_Class struct), but technically it's undefined behavior.
To quote the ISO/IEC 9899:TC2 final committee draft, section 6.2.7
paragraph 2:
All declarations that refer to the same object or function shall
have compatible type; otherwise, the behavior is undefined.
(And they are not compatible types.)
Most C compilers don't reject (or even detect!) code which has this
issue, but the GCC LTO development branch compiler does. (It
outputs the types of the objects while generating .o files, along
with a bunch of other information, then compares them when doing the
final link-time code generation pass.)
Patch from Savannah bug #25133.
* src/base/ftinit.c (FT_USE_MODULE): Include variable type.
* builds/amiga/include/freetype/config/ftmodule.h,
include/freetype/config/ftmodule.h, */module.mk: Updated to declare
pass correct types to FT_USE_MODULE.
FT_FACE_FLAG_TRICKY to indicate that the font format's hinting
engine is necessary for correct rendering.
At the same time, slightly modify the behaviour of tricky fonts:
FT_LOAD_NO_HINTING is now ignored. To really force raw loading
of tricky fonts (without hinting), both FT_LOAD_NO_HINTING and
FT_LOAD_NO_AUTOHINT must be used.
Finally, tricky TrueType fonts always use the bytecode interpreter
even if the patented code is used.
* include/freetype/freetype.h (FT_FACE_FLAG_TRICKY, FT_IS_TRICKY):
New macros.
* src/truetype/ttdriver.c (Load_Glyph): Handle new load flags
semantics as described above.
* src/truetype/ttobjs.c (tt_check_trickyness): New function, using
code of ...
(tt_face_init): This function, now simplified and updated to new
semantics.
* src/base/ftobjs.c (FT_Load_Glyph): Don't use autohinter for tricky
fonts.
* docs/CHANGES: Document it.
nor bitmaps can be considered as containing space `glyphs' only.
* src/truetype/ttpload.c (tt_face_load_loca): Handle the case where
a `glyf' table is missing.
* src/truetype/ttgload.c (load_truetype_glyph): Abort if we have no
`glyf' table but a non-zero `loca' entry.
(tt_loader_init): Handle missing `glyf' table.
* src/base/ftobjs.c (FT_Load_Glyph): Undo change 2008-12-05.
* src/sfnt/sfobjs.c (sfnt_load_face): A font with neither outlines
nor bitmaps is scalable.
0x100 instead of 0x10000; the latter value is already occupied by
FT_LOAD_TARGET_LIGHT. Bug reported by James Cloos.
Handle SFNT with neither outlines nor bitmaps. This fixes Savannah
bug #25010.
* src/base/ftobjs.c (FT_Load_Glyph): Reject fonts with neither
outlines nor bitmaps.
* src/sfnt/sfobjs.c (sfnt_load_face): Don't return an error if there
is no table with glyphs.
* src/sfnt/ttload.c (tt_face_lookup_table): Improve debugging
message.
Other minor cosmetics.
code so that memory allocation problems can be distinguished from
missing table entries. Reported by Graham Asher.
(GET_NAME): New macro.
(sfnt_load_face): Use it.
[TT_CONFIG_OPTION_BYTECODE_INTERPRETER]: Undefine
TT_CONFIG_OPTION_UNPATENTED_HINTING. This fixes the return value of
`FT_Get_TrueType_Engine_Type' (and makes it work as documented).
Reported in bug #441638 of bugzilla.novell.com.
* docs/CHANGES: Document it.
Other minor documentation improvements.
fonts (like HELVI.PFB version 003.001, used on OS/2) which define
some `subrs' elements more than once. Problem reported by Peter
Weilbacher <mozilla@weilbacher.org>.
(cff_face_done), src/pfr/pfrobjs.c (pfr_face_done),
src/pcf/pcfdrivr.c (PCF_Face_Done), src/cid/cidobjs.c
(cid_face_done), src/bdf/bdfdrivr. (BDF_Face_Done),
src/sfnt/sfobjs.c (sfnt_face_done): Protect against face == 0.
Reported by Graham Asher.
* include/freetype/internal/t1types.h (CID_FaceRec),
src/type42/t42types.h (T42_FaceRec): Comment out `afm_data'.
* src/smooth/ftgrays.c (gray_raster_render): Don't dereference
`target_map' if FT_RASTER_FLAG_DIRECT is set. Problem reported by
Stephan T. Lavavej <stl@nuwen.net>.
(FT_Outline_Decompose): Decorate with tracing messages.
* src/smooth/ftgrays.c [DEBUG_GRAYS]: Replace with
FT_DEBUG_LEVEL_TRACE.
[_STANDALONE_ && FT_DEBUG_LEVEL_TRACE]: Include stdio.h and
stdarg.h.
(FT_TRACE) [_STANDALONE_]: Remove.
(FT_Message) [_STANDALONE_ && FT_DEBUG_LEVEL_TRACE]: New function.
(FT_TRACE5, FT_TRACE7) [_STANDALONE_]: New macros.
(FT_ERROR) [_STANDALONE_]: Updated.
(gray_hline) [FT_DEBUG_LEVEL_TRACE]: Fix condition.
Use FT_TRACE7.
(gray_dump_cells): Make it `static void'.
(graay_convert_glyph): Use FT_TRACE7.
(FT_Outline_Decompose) [_STANDALONE_]: Synchronize with version in
ftoutln.c.
* src/base/ftadvanc.c (FT_Get_Advance, FT_Get_Advances): Use
FT_ERROR_BASE.
Other minor modifications.
include/freetype/config/ftconfig.h, builds/unix/ftconfig.in: Minor
beautifying.
* include/freetype/ftadvanc.h, include/freetype/ftgasp.h,
include/freetype/ftlcdfil.h: Protect against FreeType 1.
Some other minor fixes.
* devel/ftoption.h: Synchronize with
include/freetype/config/ftoption.h.
Formatting, documentation improvements.
builds/unix/ftconfig.in, include/freetype/freetype.h,
src/base/ftcalc.c:
Make FT_MulFix an inlined function. Also provide an assembler
implementation for ARM architectures. this is done to speedup
FreeType a little (on x86 3% when loading+hinting, 10% when
rendering, ARM savings are more important though).
Disable this by undefining FT_CONFIG_OPTION_INLINE_MULFIX in
ftconfig.h
include/freetype/config/ftheader.h, include/freetype/freetype.h,
src/base/Jamfile, src/base/rules.mk, src/cff/cffdrivr.c,
src/cff/cffgload.c, src/cff/cffgload.h, src/truetype/ttdriver.c,
src/truetype/ttgload.h, src/truetype/ttgload.c, src/type1/t1driver.c,
src/type1/t1gload.h, src/type1/t1gload.c:
Add a new header named FT_ADVANCES_H declaring some new APIs
to extract the advances of one or more glyphs without necessarily
loading their outlines. Also provide 'fast loaders' for the
TrueType, Type1 and CFF font drivers (more to come later)
* autogen.sh: add checks for minimum version of the 'autotools'
stuff.
assume that the first argument on the stack is the bottom-most
element. Two reasons:
o According to people from Adobe it is missing in the Type 2
specification that pushing of additional, superfluous arguments
on the stack is prohibited.
o Acroread in general handles fonts differently, namely by popping
the number of arguments needed for a particular operand (as a PS
interpreter would do). In case of buggy fonts this causes a
different interpretation which of the elements on the stack are
superfluous and which not.
Since there are CFF subfonts (embedded in PDFs) which rely on
Acroread's behaviour, FreeType now does the same.
tt_cmap4_char_map_binary): Handle fonts which treat the last segment
specially. According to the specification, such fonts would be
invalid but acroread accepts them.
newer.
* configure: zsh doesn't like ${1+"$@"}.
Update needed GNU make version.
* builds/toplevel.mk: Check for `$(eval ...)'.
* docs/INSTALL.GNU, docs/INSTALL.CROSS, docs/INSTALL.UNIX: Document
it.
=========================
Tag sources with `VER-2-3-7'.
* docs/CHANGES, docs/VERSION.DLL: Update documentation and bump
version number to 2.3.7.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.6/2.3.7/, s/236/237/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 7.
* builds/unix/configure.raw (version_info): Set to 9:18:3.
* docs/release: Updated.
Horizontal_Gray_Sweep_Drop): Test for intersections which
degenerate to a single point can be ignored; this has been confirmed
by Greg Hitchcock from Microsoft. (This was commented out code.)
* src/raster/ftraster.c (Render_Glyph, Render_Gray_Glyph,
Draw_Sweep): No-dropout mode is value 2, not value 0.
(Draw_Sweep): Really skip dropout handling for no-dropout mode.
Pass dropout rules from the TT bytecode interpreter to the
rasterizer; temporarily this is enabled only if
`USE_SCAN_CONVERSION_RULES' is defined.
* include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS,
FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the
OpenType specification.
Fix mode 4 computation.
(Render_Glyph, Render_Gray_Glyph): Handle new outline flags.
* src/truetype/ttgload.c (TT_Load_Glyph)
[USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to
FT_OUTLINE_XXX flags.
* src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
`dict->units_per_em' value before assigning it to
`cffface->units_per_EM'. Otherwise, CFFs without subfonts are be
scaled incorrectly if the font matrix is non-standard. This fixes
Savannah bug #23630.
* docs/CHANGES: Updated.
=========================
Tag sources with `VER-2-3-6'.
* docs/CHANGES, docs/VERSION.DLL: Update documentation and bump
version number to 2.3.6.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.5/2.3.6/, s/235/236/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 6.
* builds/unix/configure.raw (version_info): Set to 9:17:3.
* include/freetype/internal/psaux.h (T1_BuilderRec): Remove `scale_x'
and `scale_y'.
* src/cff/cffgload.h (CFF_Builder): Remove `scale_x' and `scale_y'.
* src/cff/cffparse.c: Include FT_INTERNAL_DEBUG_H.
* src/cff/cffobjs.h: Include FT_INTERNAL_POSTSCRIPT_HINTS_H.
bug #23497.
* builds/win32/ftdebug.c (OutputDebugStringEx): New function/macro
as a replacement for OutputDebugStringA (which WinCE doesn't have).
Update all callers.
(ft_debug_init) [_WIN32_CE]: WinCE apparently doesn't have
environment variables.
of the graphics state for subglyphs to...
(TT_Hint_Glyph): This function.
Hinting instructions for a composite glyph apparently refer to the
just hinted subglyphs, not the unhinted, unscaled outline. This
seems to fix Savannah bugs #20973 and (at least partially) #23310.
correction for pixel boundary. Without this patch, the effect can
be cumulative under certain circumstances, making glyphs taller and
taller after each call. This fixes Savannah bug #19976.
Improve support for WGL4 encoded fonts.
* src/psnames/psmodule.c (WGL_EXTRA_LIST_SIZE): New macro.
(ft_wgl_extra_unicodes, ft_wgl_extra_glyph_names,
ft_wgl_extra_glyph_name_offsets): New arrays.
(ps_check_wgl_name, ps_check_wgl_unicode): New functions.
(ps_unicodes_init): Use them to add additional Unicode mappings.
* include/freetype/internal/ftcalc.h, src/base/ftcalc.c
(FT_Matrix_Multiply_Scaled, FT_Vector_Transform_Scaled): New
functions.
* src/cff/cffobjs.h (CFF_Internal): New struct. It is used to
provide global hinting data for both the top-font and all subfonts
(with proper scaling).
* src/cff/cffobjs.c (cff_make_private_dict): New function, using
code from `cff_size_init'.
(cff_size_init, cff_size_done, cff_size_select, cff_size_request):
Use CFF_Internal and handle subfonts.
(cff_face_init): Handle top-dict and subfont matrices correctly;
apply some heuristic in case of unlikely matrix concatenation
results. This has been discussed with people from Adobe (thanks
goes mainly to David Lemon) who confirm that the CFF specs are fuzzy
and not correct.
* src/cff/cffgload.h (cff_decoder_prepare): Add `size' argument.
* src/cff/cffgload.c (cff_builder_init): Updated.
(cff_decoder_prepare): Handle hints globals for subfonts.
Update all callers.
(cff_slot_load): Handling scaling of subfonts properly.
* src/cff/cffparse.c (cff_parse_fixed_dynamic): New function.
(cff_parse_font_matrix): Use it.
* src/cff/cfftypes.h (CFF_FontDictRec): Make `units_per_em'
FT_ULong.
* docs/CHANGES: Document it.
reported by Ding Li on 2008/03/28 on freetype-devel.
* src/base/cff/cffparse.c (power_tens): New array.
(cff_parse_real): Rewritten to introduce a fourth parameter which
returns the `scaling' of the real number so that we have no
precision loss. This is not used yet.
Update all callers.
(cff_parse_fixed_thousand): Replace with...
(cff_parse_fixed_scaled): This function. Update all callers.
and `scale_y' as obsolete since they aren't used.
* src/psaux/psobjs.c (t1_builder_init): Updated.
* src/cff/cffgload.h (CFF_Builder): Mark `scale_x' and `scale_y' as
obsolete since they aren't used.
* src/cff/cffgload.c (cff_builder_init): Updated.
targets).
* src/base/ftobjs.c (FT_Open_Face): Don't define a variable in block
which is crossed by a `goto'.
* src/otvalid/otvalid.h (otv_MATH_validate): Add prototype.
* include/freetype/freetype.h (FT_FACE_FLAG_CID_KEYED,
FT_IS_CID_KEYED): New macros.
* src/cff/cffobjs.c (cff_face_init): Set number of glyphs to the
maximum CID value in CID-keyed CFFs.
Handle FT_FACE_FLAG_CID_KEYED flag.
* docs/CHANGES: Document it.
Fix CFF font matrix calculation and improve precision.
* src/cff/cffparse.c (cff_parse_real): Increase precision if integer
part is zero.
(cff_parse_font_matrix): Simplify computation of `units_per_em';
this prevents overflow also.
Support FT_Get_CID_Registry_Ordering_Supplement for PS CID fonts.
* src/cid/cidriver.c: Include FT_SERVICE_CID_H.
(cid_get_ros): New function.
(cid_service_cid_info): New service structure.
(cid_services): Register it.
division too early; otherwise the most significant digit(s) of the
final result are lost as the value is truncated to an integer. This
fixes Savannah bug #21794 (where the patch has been posted too).
expanded). This is needed for options like
--includedir='${prefix}/include'.
* builds/unix/detect.mk, configure: Prevent argument expansion in
call to the (real) `configure' script.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation if
TT_USE_BYTECODE_INTERPRETER isn't defined.
There exist CFFs which contain opcodes for the Type 1 operators
`hsbw' and `closepath' which are both invalid in Type 2 charstrings.
However, it doesn't harm to support them.
* src/cff/cffgload.c (CFF_Operator): Add `cff_op_hsbw' and
`cff_op_closepath.'
(cff_argument_counts): Ditto.
(cff_decoder_parse_charstrings): Handle Type 1 opcodes 9 (closepath)
and 13 (hsbw) which are invalid in Type 2 charstrings.
support for bit 8 in the `OS/2' table. MS is already using this;
hopefully, this becomes part of OpenType 1.5.
Prepare also support for `name' IDs 21 (WWS_FAMILY) and 22
(WWS_SUBFAMILY).
cmap14-related new APIs to the FT_Object_ActionName scheme.
update the documentation for these APIs
* src/sfnt/ttcmap.c: stronger cmap 14 validation, make the
code a little more consistent with FreeType coding conventions
and modify the cmap14 functions that returned a newly allocated
array to use a persistent vector from the TT_CMap14 object
instead.
(otv_Coverage_validate): Add fourth argument to pass an expected
count value. Update all users.
Check glyph IDs.
(otv_ClassDef_validate): Check `StartGlyph'.
* src/otvalid/otvgsub.c (otv_SingleSubst_validate): More glyph ID
checks.
* src/otvalid/otvmath.c (otv_MathConstants_validate): There are only
56 constants.
(otv_GlyphAssembly_validate, otv_MathGlyphConstruction_validate):
Check glyph IDs.
Add new service for getting the ROS from a CID font.
* include/freetype/config/ftheader.h (FT_CID_H): New macro.
* include/freetype/ftcid.h: New file.
* include/freetype/internal/ftserv.h (FT_SERVIVE_CID_H): New macro.
* include/freetype/internal/services/svcid.h: New file.
* src/base/ftcid.c: New file.
* src/cff/cffdrivr.c: Include FT_SERVICE_CID_H.
(cff_get_ros): New function.
(cff_service_cid_info): New service structure.
(cff_services): Register it.
* src/cff/cffload.c (cff_font_done): Free registry and ordering.
* src/cff/cfftypes.h (CFF_FontRec): Add `registry' and `ordering'.
* modules.cfg (BASE_EXTENSIONS): Add ftcid.c.
* src/cff/cffdrivr.c: Include FT_SERVICE_POSTSCRIPT_NAME_H.
(cff_get_ps_name): New function.
(cff_service_ps_name): New service structure.
(cff_services): Register it.
recursion depth of 1. This was the maximum value in TrueType 1.0,
and some older fonts don't set this field correctly.
* src/gxvalid/gxvmort1.c
(gxv_mort_subtable_type1_substTable_validate): Fix tracing message.
FNT_Err_Invalid_File_Format if file format was recognized but
the file doesn't contain any FNT(NE) or RT_FONT(PE) resources.
Add verbose debug logs to make it easier to debug failing load
attempts.
(FNT_Face_Init): A single FNT font can't contain more than 1 face,
so return an error if requested face index is > 0.
Do not do further attempt to load fonts if a previous attempt has
failed but returned error FNT_Err_Invalid_File_Format, i.e., the
file format has been recognized but no fonts found in the file.
logic.
(ps_parser_load_field) <T1_FIELD_TYPE_BBOX>: Skip delimiters
correctly.
(ps_parser_load_field_table): Use `fields->array_max' instead of
T1_MAX_TABLE_ELEMENTS to limit the number of arguments.
parsing.
(WinPE32_HeaderRec): New structure.
(WinPE32_SectionRec): New structure.
(WinPE_RsrcDirRec): New structure.
(WinPE_RsrcDirEntryRec): New structure.
(WinPE_RsrcDataEntryRec): New structure.
(FNT_FontRec): Remove unused `size_shift' field.
* src/winfonts/winfnt.c (fnt_face_get_dll_font): Add support for
loading bitmap .fon files in PE format.
cover all ranges which could possibly be handled by the aflatin
module (since the default fallback for unknown ranges is now the
afcjk module). It might be necessary to fine-tune this further by
splitting off modules for Greek, Cyrillic, or other blocks.
unpatented hinting
* include/freetype/freetype.h, src/base/ftpatent.c, src/truetype/ttdriver.c,
include/freetype/internal/services/svttglyf.h, modules.cfg,:
include/freetype/internal/ftserv.h,:
Fonts without a cmap must be handled correctly by FreeType (anything
Adding the FT_Face_CheckTrueTypePatents API to FT_FREETYPE_H, it is
implemented by the optional src/base/ftpatent.c
Fonts without a cmap must be handled correctly by FreeType (anything
else would be a bug).
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
[FT_DEBUG_LEVEL_TRACE]: Improve tracing message.
tt_sbit_decoder_load_image): Protect against integer overflows.
* src/pfr/pfrgload.c (pfr_glyph_load_simple): More bounding checks
for `x_control' and `y_control'.
(pfr_glyph_load_simple): Convert assertion into normal FreeType
error.
Check `idx'.
(pfr_glyph_load_compound): Convert assertion into normal FreeType
error.
* src/pfr/pfrtypes.h (PFR_GlyphRec): Comment out unused code.
* src/autofit/afglobal.c: change default hinting script to
CJK, since it works well with a larger array of scripts. thanks to
"Rahul Bhalerao" <b.rahul.pm@gmail.com> for pointing this out !
number of points in contours. Problem reported by Victor Stinner
<victor.stinner@haypocalc.com>.
(TT_Process_Simple_Glyph): Synchronize variable types.
=========================
Tag sources with `VER-2-3-4'.
* docs/CHANGES, docs/VERSION.DLL: Update documentation and bump
version number to 2.3.4.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj: s/2.3.3/2.3.4/, s/233/234/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 4.
* builds/unix/configure.raw (version_info): Set to 9:15:3.
gracefully.
(_bdf_set_default_spacing): Increase `name' buffer size to 256 and
issue an error for longer names.
(_bdf_parse_glyphs): Limit allowed number of glyphs in font to the
number of code points in Unicode.
bitmap embolderner when the pitch of the source bitmap is
*much* larger than its width
* src/truetype/ttinterp.c: fixing aliasing-related compilation
warning
builds/win32/visualc/freetype.vcproj, docs/VERSION.DLL,
include/freetype/freetype.h, include/freetype/t1tables.h,
include/freetype/internal/tttypes.h: updating version
number to 2.3.0 !!
* include/freetype/ftchapters.h, include/freetype/ftgasp.h,
include/freetype/ftlcdfil.h: updating reference documentation
with GASP support and LCD filtering sections
new API FT_Get_Gasp to return entries of the GASP table
corresponding to a given character pixel size.
* src/sfnt/ttload.c: add version check for the GASP table,
in order to be better future-proof
* include/freetype/config/ftheader.h: add definition of
FT_GASP_H, corresponding to <freetype/ftgasp.h>
* src/base/rules.mk, src/base/Jamfile, modules.cfg,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj: Adding src/base/ftgasp.c
to the default build
src/cff/cfftypes.h: formatting + do not load the CFF index
offsets into memory, since this wastes a *lot* of heap memory
with large Asian CFF fonts. There is no significant performance
loss
hinting and a memory leak with some large Asian CFF fonts
* src/base/ftobjs.c (FT_Done_Library): remove a subtle memory leak
which happens when FT_Done_Library is called with opened CFF_Faces in
it. We need to close all faces before destroying the modules, or else
some bad things (memory leaks) may happen.
or `type'.
* builds/freetype.mk (version): Extracted from freetype.h, using
GNU make's built-in string functions.
(refdoc): Use $(version) instead of static version number.
encoded in UTF-16BE. Patch from Rajeev Pahuja <rpahuja@esri.com>.
(tt_name_entry_ascii_from_ucs4): Removed.
* include/freetype/ftxf86.h: Fix and extend comment so that it
appears in the documentation.
* include/freetype/ftchapters.h: Add `font_format' section.
* src/tools/docmaker/tohtml.py (HtmlFormatter::index_exit): Add link
to TOC in index page.
Formatting.
* src/truetype/ttgload.c (tt_loader_init): Re-execute the CVT
program after a change from mono to grayscaling (and vice versa).
Use correct constant for comparison to get `exec->grayscale'.
test for a valid glyph index must be deferred to the font drivers.
This patch fixes Savannah bug #18301.
* src/base/ftobjs.c (FT_Load_Glyph): Don't check `glyph_index'.
* src/bdf/bdfdrivr.c (BDF_Glyph_Load), src/cff/cffgload.c
(cff_slot_load), src/cid/cidgload.c (cid_slot_load_glyph),
src/pcf/pcfdrivr.c (PCF_Glyph_Load), src/pfr/pfrobjs.c
(pfr_slot_load), src/truetype/ttdriver.c (Load_Glyph),
src/type1/t1gload.c (T1_Load_Glyph), src/winfonts/winfnt.c
(FNT_Load_Glyph): Check validity of `glyph_index'.
and FT_FORCE_LEGACY_LCD_FILTER at compile time. Define these macros
when building the library to change the default LCD filter to be
used. This is only useful for experimentation
src/base/ftlcdfilt.c, src/smooth/ftsmooth.c: API change for
the LCD filter, the FT_LcdFilter value is a enum describing
which filter to apply, new values FT_LCD_FILTER_LIGHT and
FT_LCD_FILTER_LEGACY (the latter implements the LibXft original
algorithm which produces incredible color fringes for everything
except very-well hinted text)
* src/autofit/aflatin.c: various tiny improvements that drastically
improve the handling of serif fonts and of LCD/LCD_V hinting modes.
* include/freetype/config/ftstdlib.h: Cast away volatileness from
argument to ft_setjmp.
* include/freetype/internal/ftvalid.h: Add comment that
ft_validator_run must not be used.
src/base/ftobjs.c: fixed a bug in the automatic unpatented
hinting support which prevented normal bytecode hinting to
work properly
* src/autofit/aftypes.h: undefining AF_DEBUG to get rid of
traces
for an upcoming 2.2.2 release
* include/freetype/ftlcdfil.h, src/freetype/ftlcdfil.c:
added a new API to support color filtering of subpixel glyph
bitmaps. In default build, the function FT_Library_SetLcdFilter
returns FT_Err_Unimplemented_Feature; you need to #define
FT_CONFIG_OPTION_SUBPIXEL_RENDERING in ftoption.h to compile
the real implementation
* src/smooth/ftsmooth.c: adding support for sub-pixel color
filtering; simplifying a few function calls
* include/freetype/config/ftheader.h: adding FT_LCD_FILTER_H
macro that points to <freetype/ftlcdfil.h>
I. IMPORTANT BUG FIXES
- Various integer overflows have been fixed.
- PFB fonts with MacOS resource fork weren't handled correctly on
non-MacOS platforms.
- The PCF font loarder has been seriously hardened against malformed
font files.
II. IMPORTANT CHANGES
- the unpatented hinter is now part of the default build of the
library, and we added code to automatically support "tricky"
fonts that need it.
what this means is that FreeType should "just work" with certain
Asian fonts, like MingLiu, which cannot properly load without a
bytecode interpreter, but fortunately do not use any of the
patented bytecode opcodes.
Note that the API didn't change, so you can still force
unpatented hinting with a special parameter to FT_Open_Face
as well.
if you're an embedded systems developer, you might want to
*disable* the feature to save code space by undefining
TT_CONFIG_OPTION_UNPATENTED_HINTING in ftoption.h.
- LCD-optimized rendering is now disabled in all default builds
of the library, mainly due to patent reasons. For more information
see:
http://lists.gnu.org/archive/html/freetype/2006-09/msg00064.html
a new configuration macro FT_CONFIG_OPTION_SUBPIXEL_RENDERING has
been introduced in ftoption.h; manually define it in this file
if you want to re-enable the feature.
the change only affects the implementation, not the FreeType API.
This means that clients don't need to be modified, because the
library still generates LCD decimated bitmaps, but with the added
constraint that R=G=B on each triplet.
- Some computation bugs in the TrueType bytecode interpreter were found,
which allow us to get rid of very subtle and rare differences we had
with the Windows renderer.
III. MISCELLANEOUS
- TrueType glyph loading is now about 25% faster.
- the anti-aliased rasterizer has been optimized and is now 15% to 25%
percent faster than the previous one, depending on content
- the Type 1 loader has been improved; as an example, it now skips
over top-level dictionaries properly
======================================================================
which report their English names through an Apple Roman
(platform,encoding) pair, with language_id != English
if the font uses another name entry with language_id == English,
it will be selected correctly though.
* src/truetype/ttobjs.c: add unpatent-hinting selection for
"mingli.ttf"
values which have the upper two bytes set to 0xFF instead of 0xFF
(as it happens in at least two CJKV fonts, `HAN NOM A.ttf' and
`HAN NOM B.ttf').
* src/smooth/ftgrays.c [GRAYS_USE_GAMMA]: Really remove all code.
Formatting.
Fix miscellaneous compiler warnings.
* freetype2/include/freetype/internal/ftobjs.h: close
comment with `*/' to avoid `/* in comment' compiler warning.
* freetype2/src/base/ftdbgmem.c (ft_mem_table_get_source): Turn
cast `(FT_UInt32)(void*)' into `(FT_UInt32)(FT_PtrDist)(void*)'
since on 64-bit platforms void* is larger than FT_UInt32.
* freetype2/src/base/ftobjs.c (t_validator_error): cast
away volatileness of argument to ft_longjmp. Spotted by
Werner `Putzfrau' Lemberg.
* freetype2/src/bdf/bdflib.c (bdf_load_font): initialize
local variable `lineno'.
* freetype2/src/gxvalid/gxvmod.c (classic_kern_validate):
mark local variable `error' volatile.
Fix for previous commit, which caused many compiler warnings/errors
about addresses of volatile objects passed as function arguments
as non-volatile pointers.
* freetype2/include/freetype/internal/ftvalid.h: Make
FT_Validator typedef a pointer to a volatile object.
* freetype2/src/gxvalid/gxvmod.c (gxv_load_table): Make function
argument `table' a pointer to a volatile object.
* freetype2/src/otvalid/otvmod.c (otv_load_table): Make function
argument `table' a pointer to a volatile object.
* freetype2/src/gxvalid/gxvmod.c (GXV_TABLE_DECL): Mark local
variable `_sfnt' as volatile since it must keep its value across
a call to ft_setjmp.
(gxv_validate): Same for local variables `memory' and `valid'.
(classic_kern_validate): Same for local variables `memory',
`ckern', and `valid'.
* freetype2/src/otvalid/otvmod.c (otv_validate): Same for function
parameter `face' and local variables `base', `gdef', `gpos', `gsub',
`jstf', and 'valid'.
* freetype2/src/sfnt/ttcmap.c (tt_face_build_cmaps): Same for
local variable `cmap'.
include/freetype/internal/tttypes.h, src/base/ftgloadr.c,
src/base/ftobjs.c, src/truetype/ttgload.c, src/truetype/ttinterp.c,
src/truetype/ttobjs.c: improvements to native TrueType hinting,
this is a first try, controlled by the FIX_BYTECODE macro in
src/truetype/ttinterp.c
add T1_TOKEN_TYPE_KEY. (struct T1_FieldRec_) add `dict'. Add macros
T1_FIELD_DICT_FONTDICT and T1_FIELD_DICT_PRIVATE. Change T1_NEW_XXX and
T1_FIELD_XXX macros to take the dictionary where the PS keywords is
expected as an additional argument.
* freetype2/src/cid/cidload.c: (T1_FieldRec): Adjust invocations
of T1_FIELD_XXX.
* freetype2/src/cid/cidtoken.h: Adjust invocations of T1_FIELD_XXX.
* freetype2/src/psaux/psobjs.c: Add macro FT_COMPONENT for tracing.
(ps_parser_to_token): Report a PostScript key as T1_TOKEN_TYPE_KEY
instead as T1_TOKEN_TYPE_ANY. (ps_parser_load_field): Make sure a token
that should be a string or name is a string or name indeed. Avoid
memory leak if a keyword has been already encountered and its value
is overwritten.
* freetype2/src/type1/t1load.c: (T1_FieldRec): Adjust invocations of
T1_FIELD_XXX. (parse_dict): Ignore keywords that occur in the wrong
dictionary (e.g., in Private instead of FontDict).
* freetype2/src/type1/t1tokens.h: Adjust invocations of T1_FIELD_XXX.
`t1_decoder_init' and let the caller of `t1_decoder_init' take care
of it.
Call the finisher for T1_Decoder in `cid_face_compute_max_advance'
and `T1_Compute_Max_Advance'.
* freetype2/include/freetype/internal/psaux.h (T1_DecoderRec):
Remove field `face', add `len_buildchar'.
* freetype2/include/freetype/internal/t1types.h (T1_FaceRec): Add
field `buildchar'.
* freetype2/src/cid/cidgload.c (cid_face_compute_max_advance): Call
finisher for T1_Decoder.
(cid_slot_load_glyph): Do not ignore failure when initializing the
T1_Decoder.
* freetype2/src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Updated.
(t1_decoder_init): Remove initialization of fields `buildchar' and
`len_buildchar'.
(t1_decoder_done): Remove deallocation of field `buildchar'.
* freetype/src/type1/t1gload.c (T1_Compute_Max_Advance): Initialize
T1_Decoder's `buildchar' and `len_buildchar'; call finisher for
T1_Decoder.
(T1_Load_Glyph): Initialize T1_Decoder's `buildchar' and
`len_buildchar'; make sure to call finisher for T1_Decoder even in
case of error.
* freetype2/src/type1/t1load.c (T1_Open_Face): Allocate new field
`buildchar' of T1_FaceRec.
* freetype2/src/type1/t1objs.c (T1_Face_Done): Free new field
`buildchar' of T1_FaceRec.
IS_PS_NEWLINE, IS_PS_SPACE, IS_PS_SPECIAL, IS_PS_DELIM, IS_PS_DIGIT,
IS_PS_XDIGIT, and IS_PS_BASE85 (from freetype2/src/psaux/psconv.h).
(T1_FieldLocation): Add T1_FIELD_LOCATION_LOADER,
T1_FIELD_LOCATION_FACE, and T1_FIELD_LOCATION_BLEND.
(T1_DecoderRec): New fields `buildchar' and `face'.
(IS_PS_TOKEN): New macro.
* freetype2/include/freetype/internal/t1types.h (T1_FaceRec): New
fields `ndv_idx', `cdv_idx', and `len_buildchar'.
* freetype2/include/freetype/t1tables.h (PS_BlendRec): New fields
`default_design_vector' and `num_default_design_vector'.
* freetype2/src/psaux/psconv.h: Move macros IS_PS_NEWLINE,
IS_PS_SPACE, IS_PS_SPECIAL, IS_PS_DELIM, IS_PS_DIGIT, IS_PS_XDIGIT,
and IS_PS_BASE85 to freetype2/include/freetype/internal/psaux.h.
* freetype2/src/psaux/psobjs.c (ps_parser_to_token_array): Allow
`token' argument to be NULL if we want only to count the number of
tokens.
(ps_tocoordarray): Allow `coords' argument to be NULL if we just
want to skip the array.
(ps_tofixedarray): Allow `values' argument to be NULL if we just
want to skip the array.
* freetype2/src/psaux/t1decode.c (t1_decoder_parse_charstrings): Add
support for (partially commented out) othersubrs 19-25, 27, and 28.
(t1_decoder_init): Initialize new fields `face' and `buildchar'.
(t1_decoder_done): Release new field `buildchar'.
* freetype2/src/type1/t1load.c (parse_buildchar, parse_private): New
functions.
(t1_keywords): Register them.
(t1_allocate_blend): Updated.
(t1_load_keyword): Handle field types T1_FIELD_LOCATION_LOADER,
T1_FIELD_LOCATION_FACE and T1_FIELD_LOCATION_BLEND.
(parse_dict): Remove `keyword_flags' argument.
Use new macro IS_PS_TOKEN.
Changed function so that later PostScript definitions override
earlier ones.
(t1_init_loader): Initialize new field `keywords_encountered'.
(T1_Open_Face): Initialize new fields `ndv_idx', `cdv_idx', and
`len_buildchar'.
Remove `keywords_flags'.
* freetype2/src/type1/t1load.h (T1_LoaderRect): New field
`keywords_encountered'.
(T1_PRIVATE, T1_FONTDIR_AFTER_PRIVATE): New macros.
* freetype2/src/type1/t1tokens.h [!T1_CONFIG_OPTION_NO_MM_SUPPORT]:
New entries for parsing /NDV, /CDV, and /DesignVector.
* src/pcf/pcfdrivr.c (PCF_Face_Done): Protect against NULL pointers.
(PCF_Face_Init): Add calls to PCF_Face_Done in case of errors.
* src/pcf/pcfread.c (pcf_read_TOC): Protect against malformed table
data and check that tables don't overlap (using a simple
bubblesort).
(PCF_METRIC_SIZE, PCF_COMPRESSED_METRIC_SIZE, PCF_PROPERTY_SIZE):
New macros which give the size of data structures in the data
stream.
(pcf_get_properties): Use rough estimates to get array size limits.
Assign `face->nprops' and `face->properties' earlier so that a call
to PCF_Face_Done can do the clean-up in case of error.
Protect against invalid string offsets.
(pcf_get_metrics): Clean up code.
Adjust tracing message levels.
Use rough estimate to get array size limit.
(pcf_get_bitmaps): Clean up code.
Adjust tracing message levels.
Use rough estimates to get offset limits.
(pcf_get_encodings): Adjust tracing message level.
(pcf_get_accel): Clean up code.
(t1_decoder_parse_charstrings): Operator with
opcode 15 pops its two arguments.
Handle the case where the pops of an othersubr may be part of a
subroutine.
Handle unknown othersubrs gracefully: count their operands and let
the following pop operators push the operands as the results onto
the Type1 stack.
Improve handling of setcurrentpoint opcode.
for a `Simplified Parser'. This makes the parser more robust as it
doesn't poke around in PostScript code. Additionally, it makes the
FontDirectory hackery in src/type1/t1load.c unnecessary.
* src/psaux/psobjs.c (IS_OCTAL_DIGIT): New macro.
(skip_literal_string): Add FT_Error as return value.
Handle escapes better.
(skip_string): Add FT_Error as return value.
Don't set `parser->error' but return error code directly.
(skip_procedure): New function.
(ps_parser_skip_PS_token): Handle procedures.
Update code.
(ps_parser_to_token): Update code.
(ps_parser_load_field_table): Handle bbox entries also.
* src/type1/t1load.c (parse_dict): Remove FontDirectory hackery.
Add commented-out code for synthetic fonts.
src/psaux/t1cmap.c, src/psnames/psmodule.c: Fix for the memory
leak described in bug #16759.
We change 'ps_unicodes_init' so that it also takes a 'free_glyph_name'
callback to release the glyph names returned by 'get_glyph_name'
of 'face->num_glyphs' which missed the last glyph, due to
the offset-by-1 computation, since the PFR format doesn't
guarantee that glyph index 0 corresponds to the "missing
glyph"
should fix bug #16668
src/autofit/afcjk.c, src/autofit/afhints.c, src/autofit/aflatin.c,
src/autofit/aftypes.h, src/base/ftcalc.c, src/base/ftoutln.c,
src/gzip/ftgzip.c, src/psaux/psconv.c, src/truetype/ttgload.c,
src/type1/t1gload.c:
this is a major patch used to drastically improve the performance
of loading glyphs. This both speeds up loading the glypn vector
themselves and the auto-fitter.
note that we've started using inline assembler with GCC to
implement FT_MulFix, given that this function is so damn
important for the engine's performance.
the resulting speed-up is about 25%.
used to detect rogue clients from 4 to 16. This is to prevent
some segmentation faults with fonts like KozMinProVI-Regular.otf
which comes from the Japanese Adobe Reader Asian Font pack.
boundary markers.
* src/tools/docmaker/content.py (re_field): Allow `.' in field names
(but not at the beginning or end).
* include/freetype/*: Many minor documentation improvements (adding
links, spelling errors, etc.).
* include/freetype/*: s/scale/scaling value/ where appropriate.
Many other minor documentation improvements.
* src/tools/docmaker/sources.py (re_italic, re_bold): Handle
trailing punctuation.
* src/tools/docmaker/tohtml.py (HtmlFormatter::make_html_word): Add
warning message for undefined cross references.
Update handling of re_italic and re_bold.
directory to suppress generation of .pyc files. According to the
Python docs there isn't a more elegant solution (currently).
* builds/toplevel.mk (dist): New target which builds .tar.gz,
.tar.bz2, and .zip files. Note that the version number is still
hard-coded.
(do-dist): Sub-target of `dist'.
(CONFIG_GUESS, CONFIG_SUB): New variables.
(.PHONY): Updated.
Watson <pwatson@redlinepy.com>.
* builds/unix/configure.ac: Renamed to...
* builds/unix/configure.raw: This which now serves (with appropriate
modifications) as a template for configure.ac.
* version.sed: New script.
* autogen.sh: Generate configure.ac from configure.raw, using
FREETYPE_MAJOR, FREETYPE_MINOR, and FREETYPE_PATCH from freetype.h.
src/base/ftmac.c, src/base/ftrfork.c, src/lzw/ftzopen.c,
src/raster/ftrend1.c, src/sfnt/ttpost.c, src/truetype/ttgxvar.c,
src/type42/t42parse.c, src/winfonts/winfnt.c: hardening the code
against out-of-bounds conditions when allocating arrays. This is
for the cases where FT_NEW_ARRAY and FT_RENEW_ARRAY are not used
already. Introducing the new FT_ALLOC_MULT and FT_REALLOC_MULT
macros.
include/freetype/internal/ftmemory.h, src/base/ftdbgmem.c,
src/base/ftutil.c: udpating the memory management functions and
macros to safely deal with array size buffer overflows, this
corresponds to attemps to allocate arrays that are too large. For
an example, consider the following code:
count = read_uint32_from_file();
array = malloc( sizeof(Item) * count );
for ( nn = 0; nn < count; nn++ )
array[nn] = read_item_from_file();
if 'count' is larger than FT_UINT_MAX/sizeof(Item), the multiplication
will overflow and the array allocated will be smaller than the data
read from the file. In this case, the heap will be trashed, and this
can be used as a denial-of-service, or make the engine crash later.
the FT_ARRAY_NEW and FT_ARRAY_RENEW macro now check that the new
count is no more than FT_INT_MAX/item_size, otherwise, a new error,
named 'FT_Err_Array_Too_Large' will be returned.
note that the memory debugger now works again when FT_DEBUG_MEMORY
is defined, and FT_STRICT_ALIASING has disappeared, the corresponding
code being now the default.
msn2@bidyut.com.
* include/freetype/config/ftstdlib.h (FT_CHAR_BIT, FT_FILE,
ft_fopen, ft_fclose, ft_fseek, ft_ftell, ft_fread, ft_smalloc,
ft_scalloc, ft_srealloc, ft_sfree, ft_labs): New wrapper macros for
C library functions. Update all users accordingly (and catch some
other places where the C library function was used instead of the
wrapper functions).
* src/base/ftsystem.c: Don't include stdio.h and stdlib.h.
* src/gzip/zutil.h [MSDOS && !(__TURBOC__ || __BORLANDC__)]: Don't
include malloc.h.
* src/cff/cffload.c (cff_charset_load): Set `charset->max_cid'.
* src/cff/cffgload.c (cff_slot_load): Change type of third parameter
to `FT_UInt'.
Check range of `glyph_index'.
* src/cff/cffgload.h: Updated.
include/freetype/cache/ftccmap.h,
include/freetype/cache/ftcglyph.h
include/freetype/cache/ftcimage.h
include/freetype/cache/ftcmanag.h
include/freetype/cache/ftcmru.h
include/freetype/cache/ftcsbits.h:
removing these header files from the public include directory.
* include/freetype/config/ftheader.h:
changing the definition of FT_CACHE_INTERNAL_XXX_H macros to
redirect to FT_CACHE_H instead
* src/cache/ftcbasic.c, src/cache/ftccache.c, src/cache/ftccache.h,
src/cache/ftccback.h, src/cache/ftccmap.c, src/cache/ftcglyph.c,
src/cache/ftcglyph.h, src/cache/ftcimage.c, src/cache/ftcimage.h,
src/cache/ftcmanag.c, src/cache/ftcmanag.h, src/cache/ftcmru.c,
src/cache/ftcmru.h, src/cache/ftcsbits.c, src/cache/ftcsbits.h:
modifications to prevent using the FT_CACHE_INTERNAL_XXX_H macros,
and grab the headers in 'src/cache' instead (see below).
src/cache/ftcsbits.h, src/cache/ftcmanag.h, src/cache/ftccmap.h,
src/cache/ftcmru.h: copying the cache's internal header files which
were located in 'include/freetype/cache' to the 'src/cache' directory
instead.
Note that these files are not used by FreeType clients, all cache
public APIs have been already moved to include/freetype/ftcache.h,
and the FT_CACHE_INTERNAL_XXXX_H macros all resolve to it.
the move is to allow us to modify the internals without intereference
from rogue clients. Note that there are no known client that accesses
the cache internals at the moment.
error if a negative size is passed in parameters.
* src/cache/ftccache.c: make ftc_node_destroy FT_BASE_DEF, it needs to
be exported for rogue clients
* src/pshinter/pshglob.c: prevent problems with malformed fonts which
have an odd number of blue values (these are broken according to the
specs).
* src/cff/cffload.c, src/type1/t1load.c: modify the loaders to force
even-ness of 'num_blue_values'. Also change the CFF loader so that
invalid entries in index files are ignored.
Re-enable glyph metrics grid-fitting. It is now done in the base
layer.
(FT_Set_Char_Size, FT_Set_Pixel_Sizes): Make sure the width and height
are not too small or too large, just like we were doing in 2.1.10.
* src/autofit/afloader.c (af_loader_load_g): The vertical metrics are
not scaled.
src/base/ftobjs.c, src/base/ftutil.c, src/cff/cffobjs.c,
src/psaux/afmparse.c, src/sfnt/ttbdf.c, src/tools/apinames.c,
src/truetype/ttdriver.c:
solved compiler warnings as well as C++ compilation problems
ft_contour_enclosed, ft_outline_get_orientation): Commented out. We
have to wait until `FT_GlyphSlot_Own_Bitmap' is stabilized.
(FT_Outline_Embolden): Use `FT_Outline_Get_Orientation'.
documentation.
* include/freetype/ftsynth.h (FT_GlyphSlot_Own_Bitmap),
src/base/ftsynth.c (FT_GlyphSlot_Own_Bitmap): New function to make
sure a glyph slot owns its bitmap. It is also marked experimental and
due to change.
(FT_GlyphSlot_Embolden): Undo the last change. It turns out rendering
the outline confuses some applications.
`width' and `height' to `FT_Long'.
(enum FT_Size_Request_Type), src/base/ftobjs.c (FT_Request_Metrics):
New request type `FT_SIZE_REQUEST_TYPE_SCALES' to specify the scales
directly.
`FT_ORIENTATION_NONE'.
* src/base/ftoutln.c (FT_OUTLINE_GET_CONTOUR, ft_contour_has,
ft_contour_enclosed, ft_outline_get_orientation): Another version of
`FT_Outline_Get_Orientation'. This version differs from the public
one in that each part (contour not enclosed in another contour) of the
outline is checked for orientation.
(FT_Outline_Embolden): Use `ft_outline_get_orientation'.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Render the outline and
use bitmap's embolden routine when the outline one failed.
include/internal/services/svtteng.h, src/base/ftobjs.c,
src/truetype/ttdriver.c:
adding a new API named FT_Get_TrueType_Engine_Type to determine
wether we have a patented, unpatented or unimplemented TrueType
bytecode interpreter.
the FT_Get_Module_Flags API was removed consequently.
src/sfnt/ttsbit.h, src/sfnt/ttsbit.c: moving the definition
of 'set_sbit_strike' and 'load_sbit_metrics' to their 2.1.8
location. This is used to support binary compatibility with
the X.Org server's libXfont library.
note that this disables memory optimizations for the embedded
bitmap loader.Sigh....
anymore, this is used to ensure that all FT_BASE internal
functions are available for dynamic linking
* include/freetype/ftcache.h, src/cache/ftcbasic.c,
src/cache/ftccmap.c: try to revive old functions of the
cache sub-system. We also try to support FTC_ImageCache_Lookup
and FTC_ImageCache_SBit with legacy signatures through a gross
hack (hope it works)
unused `max_points' and `max_contours'.
* src/cid/cidobjs.c (cid_face_init), src/type1/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init): Update.
* include/freetype/internal/tttypes.h (TT_FaceRec): Remove unused
`max_components'.
* src/truetype/ttinterp.h (TT_ExecContextRec): Remove unused
`loadSize' and `loadStack'.
* src/truetype/ttinterp.c (TT_Done_Context, TT_Load_Context),
src/sfnt/ttload.c (tt_face_load_maxp): Update.
* src/cff/cffobjs.h (cff_size_select), src/sfnt/sfdriver.c
(sfnt_interface), src/truetype/ttdriver.c (tt_size_request): Fix
compiler errors/warnings when TT_CONFIG_OPTION_EMBEDDED_BITMAPS is not
defined.
* src/sfnt/ttmtx.c (tt_face_load_hmtx, tt_face_get_metrics): Fix
possible segment faults for the non-FT_OPTIMIZE_MEMORY'ed versions.
(finally!)
For most OpenType tables, `tt_face_load_xxxx' simply loads the table
and `face->root' is set later in `sfnt_load_face'. Here, we try to
make this work for _all_ tables.
* src/sfnt/ttsbit.c, src/sfnt/ttsbit0.c, src/sfnt/ttload.c,
src/sfnt/ttmtx.c: all `tt_face_load_xxxx' should load the table and
then exit. Error handling or setting face->root is done later in
`sfnt_load_face'.
Pretty trace messages.
* src/sfnt/sfobjs.c (sfnt_load_face): Work harder.
Mac bitmap-only fonts are not scalable.
Check that `face->header.Units_Per_EM' is not zero.
(LOAD_, LOADM_): Pretty trace messages.
* src/sfnt/ttsbit0.c (tt_face_load_strike_metrics): Read metrics from
`eblc'.
* src/sfnt/ttcmap.c (tt_face_build_cmaps), src/sfnt/ttpost.c
(load_format_20, load_format_25, tt_face_get_ps_name): Use
face->max_profile.numGlyphs, instead of face->root.num_glyphs.
documentation that negative strength values are possible.
Give an example call.
* include/freetype/freetype.h (FT_GlyphSlotRec): Improve
documentation of `outline' field.
* src/sfnt/sfobjc.s: Inckude FT_INTERNAL_DEBUG_H.
* src/sfnt/sfdriver.c: Include ttmtx.h.
* src/autofit/afcjk.c: Include aftypes.h and aflatin.h.
return error if table is missing.
Check table length in non-FT_OPTIMIZE_MEMORY'ed `tt_face_load_hmtx'.
* src/sfnt/sfobjs.c (sfnt_load_face): Take care of missing metrics
tables. The last change makes Mac bitmap-only font not load and this
fixes it.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation error
when FT_CONFIG_OPTION_INCREMENTAL is defined.
directory (offset table and table directory) as a normal table like
the others. This also means that TTC is no longer recognized there,
but in `init_face'.
* include/freetype/internal/sfnt.h (SFNT_Interface),
src/sfnt/sfdriver.c: `load_sfnt_header' and `load_directory' are
combined and renamed to `load_font_dir'.
* src/sfnt/ttload.h, src/sfnt/ttload.c:
s/sfnt_dir_check/check_table_dir/.
`sfnt_init' is moved to sfobjs.c and renamed to `sfnt_open_font'.
`tt_face_load_sfnt_header' and `tt_face_load_directory' are combined
and renamed to `tt_face_load_font_dir'.
* src/sfnt/sfobjs.c (sfnt_init_face): Recognize TTC here.
after the tables' tags; `hdmx' is TrueType-specific and thus the code
is moved to the truetype module; `get_metrics' is moved here from the
truetype module so that the code can be shared with the cff module.
This pass involves no real changes. That is, the code is moved
verbatim mostly. The only exception is the return value of
`tt_face_get_metrics'.
* include/freetype/internal/sfnt.h, src/sfnt/rules.mk,
src/sfnt/sfdriver.c, src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttload.h, src/sfnt/ttsbit.c,
src/sfnt/ttsbit.h, src/sfnt/ttsbit0.c: Clean up the SFNT_Interface.
* src/sfnt/ttmtx.c, src/sfnt/ttmtx.h: Metrics-related tables' loading
and parsing code is moved here.
Move `tt_face_get_metrics' here from the truetype module. The return
value is changed from `void' to `FT_Error'.
* include/freetype/internal/fttrace.h: New trace: ttmtx.
* src/truetype/ttpload.c, src/truetype/ttpload.h: `hdmx' loading and
parsing code is moved here.
New function `tt_face_load_prep' splitted from `tt_face_load_fpgm'.
`tt_face_load_fpgm' returns `FT_Err_Ok' if `fpgm' doesn't exist.
* src/cff/cffgload.c, src/cff/cffobjs.c: Update.
* src/truetype/ttgload.c, src/truetype/ttobjs.c: Update.
* src/autofit/aflatin.c (af_latin_metrics_init_widths): Use
AF_LatinMetricsRec as the dummy metrics because we cast the metrics to
it later in `af_latin_hints_link_segments'.
to enable autofit CJK script support. (#define'd by default)
* src/autofit/aflatin.h (AF_LATIN_CONSTANT): New macro.
* src/autofit/aflatin.c (af_latin_metrics_init_widths): Make sure that
`edge_distance_threshold' is always set.
(af_latin_hints_link_segments): Potential divide by 0 bug.
Use latin constant in the scoring formula.
* src/autofit/afcjk.c: Minor updates due to the above three changes.
* docs/TODO, docs/CHANGES: Updated.
patch. You need to #define AF_MOD_CJK in afcjk.c to enable it.
* src/autofit/afglobal.c, src/autofit/afcjk.h, src/autofit/afcjk.c,
src/autofit/rules.mk, src/autofit/autofit.c, src/autofit/aftypes.h:
Add CJK module based on akito's autohint patch.
* src/autofit/afhints.h (AF_SegmentRec): New field `len' for the
overlap length of the segments. (AF_SEGMENT_LEN, AF_SEGMENT_DIST):
New macros.
* src/autofit/aflatin.h (af_latin_metrics_init_widths),
src/autofit/aflatin.c (af_latin_metrics_init_widths): Made `FT_LOCAL'.
Use the character given by the caller.
(af_latin_metrics_init_widths, af_latin_hints_link_segments): Scale
the thresholds.
* src/autofit/afloader.c (af_loader_load_g): Respect
AF_SCALER_FLAG_NO_ADVANCE.
sufficient to modify a single file, `modules.cfg', to control the
inclusion of modules and base extension files.
This change also fixes the creation of ftmodule.h; it now depends on
`modules.cfg' and thus is rebuilt only if necessary.
Finally, a version of `ftoption.h' in OBJ_DIR is preferred over the
default location.
* modules.cfg: New file.
* builds/freetype.mk: Don't include `modules.mk'.
Include all `rules.mk' files as specified in `modules.cfg'.
(FTOPTION_FLAG, FTOPTION_H): New variables.
(FT_CFLAGS): Add macro definition for FT_CONFIG_MODULES_H.
Add FTOPTION_FLAG.
($(FT_INIT_OBJ)): Don't use FT_MODULE_LIST.
(CONFIG_H): Add FTMODULE_H and FTOPTION_H.
(INCLUDES): Add DEVEL_DIR.
(INCLUDE_FLAGS, FTSYS_SRC, FTSYS_OBJ, FTDEBUG_SRC, FTDEBUG_OBJ,
OBJ_M, OBJ_S): Use `:=', not `='.
(remove_ftmodule_h): New phony target to delete `ftmodule.h'.
(distclean): Add remove_ftmodule_h.
* builds/modules.mk: (MODULE_LIST): Removed.
(make_module_list, clean_module_list): Replace targets
with...
(FTMODULE_H_INIT, FTMODULE_H_CREATE, FTMODULE_H_DONE): New
variables. Reason for the change is that it is not possible to have
a phony prerequisite which is run only if the target file must be
rebuilt (phony prerequisites act like subroutines and are *always*
executed). We only want to rebuild `ftmodule.h' if `module.cfg' is
changed.
Update all callers.
($FTMODULE_H)): Rule to create `ftmodule.h', depending on
`modules.cfg'.
* builds/toplevel.mk: Rewrite and simplify module handling.
(MODULES_CFG, FTMODULE_H): New variables.
Include MODULES_CFG.
(MODULES): New variable to include all `module.mk' and `rules.mk'
files. We no longer use make's `wildcard' function for this.
* Makefile (USE_MODULES): Remove. Update all users.
(OBJ_DIR): Define it here.
* src/*/module.mk: Change
make_module_list: foo
foo: ...
to
FTMODULE_H_COMMANDS += FOO
define FOO
...
endef
in all files. `FTMODULE_H_COMMANDS' is used in `FTMODULE_H_CREATE'.
* src/base/rules.mk (BASE_EXT_SRC): Use BASE_EXTENSIONS.
* builds/unix/detect.mk (setup): Always execute `configure' script.
(have_mk): Rename to...
(have_Makefile): This.
Don't use `strip' function.
* builds/unix/unix.mk: Include `install.mk' only if BUILD_PROJECT is
defined.
(have_mk): Don't use `strip' function.
Test for unix-def.mk in OBJ_DIR, not BUILD_DIR (and invert the test
accordingly).
* builds/unix/install.mk (install, uninstall): Handle `ftmodule.h'.
* builds/os2/os2-dev.mk, builds/unix/unix-dev.mk,
builds/win32/w32-bccd.mk, builds/win32/w32-dev.mk: Don't define
BUILD_DIR but DEVEL_DIR for development header files.
* builds/ansi/ansi-def.mk (TOP_DIR, OBJ_DIR),
builds/beos/beos-def.mk (TOP_DIR, OBJ_DIR), builds/unix/unix-def.in
(TOP_DIR, OBJ_DIR): Removed. Defined elsewhere.
* builds/dos/dos-def.mk (OBJ_DIR), builds/os2/os2-def.mk (OBJ_DIR),
builds/win32/win32-def.mk (OBJ_DIR): Removed. Defined elsewhere.
* builds/unix/unixddef.mk: Don't define BUILD_DIR but DEVEL_DIR for
development header files.
Don't define PLATFORM.
* configure: Copy `modules.cfg' to builddir if builddir != srcdir.
Update snippet taken from autoconf's m4sh.m4 to current CVS version.
Be more verbose.
* include/freetype/config/ftmodule.h: Add comments -- this file is
no longer used if FreeType is built with GNU make.
* docs/CHANGES, docs/CUSTOMIZE, docs/INSTALL, docs/INSTALL.ANY,
docs/INSTALL.GNU, docs/INSTALL.UNX: Document new build mechanism.
Other minor updates.
* modules.txt: Removed. Contents included in `modules.cfg'.
* include/freetype/internal/ftmemory.h (FT_QAlloc_Debug,
FT_Free_Debug) [FT_STRICT_ALIASING]: Fix typos.
* src/base/ftdbgmem.c (FT_Alloc_Debug, FT_Realloc_Debug,
FT_QAlloc_Debug, FT_QRealloc_Debug, FT_Free_Debug)
[FT_STRICT_ALIASING]: Implement.
src/psaux/afmparse.c, src/tools/test_afm.c: Read `FontBBox',
`Ascender', and `Descender' from an AFM.
* src/type1/t1afm.c (T1_Read_Metrics): Use the metrics from the AFM.
* include/freetype/freetype.h (FT_FaceRec): Mention that fields may be
changed after file attachment.
* builds/unix/install.mk: the installation now avoids installing
the internal headers, and removes existing ones if finds in the
target install directory
the warp hinter isn't active (it shouldn't, still experimental)
* Jamfile, include/freetype/config/ftmodule.h: removed "gxvalid"
and "otvalid" from the list of modules that are linked statically
to a given FreeType library. Functionality has been moved to the
"ftvalid" CVS module.
note also that current Make-based build system still compiles the
modules though...
* include/freetype/config/ftoption.h: added FT_STRICT_ALIASING,
which controls the definitions of the memory management functions
to avoid warnings with recent versions of GCC. this macro is
only here to be disabled, in case we detect problems with the
new scheme.
NOTE: disable macro to use the memory debugger. this will be fixed
later !!
when compiling the library.
* include/freetype/config/ftheader.h: remove inclusions of
internal headers, except if the macro FT2_BUILD_LIBRARY is defined.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
src/autofit/aftypes.h, src/autofit/afloader.c, src/autofit/autofit.c:
adding experimental implementation of "warp hinting" (new hinting
algorithm for gray-level and LCD rendering). It is disabled by default,
you need to #define AF_USE_WARPER in aftypes.h to enable it.
implement an AFM parser. It is used to parse an AFM file.
* src/psaux/psconv.c, src/psaux/psconv.h: New files to provide
conversion functions (e.g, PS real number => FT_Fixed) for the
PS_Parser and AFM_Parser. Some of the functions are taken, with some
modifications, from the psobjs.c
* src/psaux/psobjs.c: Use functions from psconv.c.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c:: Add
`AFM_Parser' to the `psaux' service.
* src/psaux/psaux.c, src/psaux/rules.mk: Include those new files.
* src/tools/test_afm.c: A test program for AFM parser.
* include/freetype/internal/services/svkern.h,
include/freetype/internal/ftserv.h: New service `Kerning'. It is
currently only used to get the track kerning information.
* src/type1/t1driver.c, src/type1/t1objs.c, src/type1/t1afm.c,
src/type1/t1afm.h: Update to use the AFM parser.
Provide the `Kerning' service.
* include/freetype/freetype.h, src/base/ftobjs.c: New API
`FT_Get_Track_Kerning'.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
(PCF_Glyph_Load), src/winfonts/winfnt.c (FNT_Load_Glyph): Don't set
the linear advance fields as they are only for the outline glyphs.
* include/freetype/freetype.h: Documentation updates/clarificatoins.
The meaning of FT_LOAD_FORCE_AUTOHINT is changed so that no real
change need be made to the code.
* src/base/ftobjs.c (FT_Load_Glyph): Resolve flag dependencies and
decide whether to use the auto-hinter according to documentation.
There should to be no real difference.
Some checks (e.g., is text height positve?) after the glyph is loaded.
(FT_Select_Size, FT_Request_Size): Scales are set to wrong values.
Be careful that scales won't be negative.
* src/bdf/bdfdrivr.c (BDF_Size_Request, BDF_Size_Select),
src/pcf/pcfdrivr.c (PCF_Size_Request, PCF_Size_Select),
src/winfonts/winfnt.c (FNT_Size_Request, FNT_Size_Select): Do size
matching for request of type NOMINAL and REAL_DIM.
* src/winfonts/winfnt.c (FNT_Face_Init): Print trace message when
`pixel_height' is used for nominal height.
* src/base/ftobjs.c (FT_Request_Size): Call `FT_Match_Size' if the
face is bitmap only and driver doesn't provide `request_size'. This
is added merely for completion as no driver satisfies the conditions.
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
* include/freetype/internal/services/svpscmap.h: Include
FT_INTERNAL_OBJECTS_H.
(PS_Unicode_Index_Func): Removed. Unused.
(PS_Macintosh_Name_Func): Renamed to...
(PS_Macintosh_NameFunc): This.
Update all callers.
(PS_Adobe_Std_Strings_Func): Renamed to...
(PS_Adobe_Std_StringsFunc): This.
Update all callers.
(PS_UnicodesRec): This is the former `PS_Unicodes' structure.
Add `cmap' member.
Update all callers.
(PS_Unicodes): This is now a typedef'd pointer to PS_UnicodesRec.
Update all callers.
(PS_Glyph_NameFunc): New typedef.
(PS_Unicodes_InitFunc): Change arguments to expect a function
and generic data pointer which returns a glyph name from a given
index.
* src/psnames/psmodule.c (ps_unicodes_init, ps_unicodes_char_index,
ps_unicodes_char_next, pscmaps_interface): Updated.
* include/freetype/internal/t1types.h (T1_FaceRec): Updated.
* src/psaux/t1cmap.h (T1_CmapStdRec): Updated.
(T1_CmapUnicode, T1_CmapUnicodeRec): Removed.
* src/psaux/t1cmap.c (t1_get_glyph_name): New callback function.
(t1_cmap_unicode_init, t1_cmap_unicode_done,
t1_cmap_unicode_char_index, t1_cmap_unicode_char_next,
t1_cmap_unicode_class_rec): Updated.
* src/type42/t42types.h (T42_FaceRec): Updated.
* include/freetype/internal/services/svpscmap.h (PS_UniMap): Use
FT_UInt32 for `glyph_index'.
(PS_Unicodes_InitFunc): Use FT_String for `glyph_names'.
(PS_Unicodes_CharIndexFunc): Use FT_UInt32 for `unicode'.
(PS_Unicodes_CharNextFunc): Make second argument a pointer to
FT_UInt32.
* src/psnames/psmodule.c (VARIANT_BIT, BASE_GLYPH): New macros.
(ps_unicode_value): Set VARIANT_BIT in return value if glyph is a
variant glyph (this is, it has non-leading `.' in its name).
(compare_uni_maps): Sort base glyphs before variant glyphs.
(ps_unicodes_init): Use FT_String for `glyph_names' argument.
Reallocate only if number of used entries is much smaller.
Updated to handle variant glyphs.
(ps_unicodes_char_index, ps_unicodes_char_next): Prefer base glyphs
over variant glyphs.
Simplify code.
* src/psaux/t1cmap.c (t1_cmap_uni_pair_compare): Removed.
(t1_cmap_unicode_init, t1_cmap_unicode_char_index,
t1_cmap_unicode_char_next): Use pscmap service.
(t1_cmap_unicode_done): Updated.
* src/psaux/t1cmap.h (T1_CMapUniPair): Removed.
(T1_CMapUnicode): Use PS_Unicodes structure.
correctly to generate the API reference in 'docs/reference'
* src/tools/docmaker/tohtml.py: update to output nicer fields lists
in the API reference
* src/base/ftobjs.c (FT_Load_Glyph): FT_LOAD_TARGET_LIGHT now
forces auto-hinting
* freetype/freetype.h: updating the documentation for
FT_LOAD_TARGET_XXX and FT_Render_Mode values
include/freetype/config/ftstdlib.h,
include/freetype/internal/tttypes.h,
src/sfnt/Jamfile, src/sfnt/rules.mk, src/sfnt/sfdriver.c,
src/sfnt/ttbdf.h, src/sfnt/ttbdf.c, src/sfnt/sfobjs.c:
Added support for an embedded 'BDF ' table within SFNT-based
bitmap font files. This is used to store atoms & properties from
the original BDF fonts that were used to generate the font file.
the feature is controled by TT_CONFIG_OPTION_BDF within 'ftoption.h'
and is used to implement FT_Get_BDF_Property for these font files.
At the moment, this is still experimental, the BDF table format isn't
cast into stone yet.
implementation of the LIGHT hinting mode to completely disable
horizontal hinting. This is an experimental effort to integrate
David Chester's latest patch without fucking the other hinting
modes as well.
Note that this doesn't force auto-hinting for all fonts however.
for cmap format 4. For overlapped but sorted segments, which is
previously considered unsorted, we still use binary search.
* src/sfnt/ttcmap.h (struct TT_CMapRec_): Replace `unsorted' by
`flags'.
(TT_CMAP_FLAG_UNSORTED, TT_CMAP_FLAG_OVERLAPPED): New macros.
* src/sfnt/ttcmap.c (OPT_CMAP4): Removed as it is always defined.
(struct TT_CMap4Rec_): Remove `old_charcode' and `table_length'.
(tt_cmap4_reset): Removed.
(tt_cmap4_init): Updated accordingly.
(tt_cmap4_next): Updated accordingly.
Take care of overlapped segments.
(tt_cmap4_validate): Make sure the subtable is large enough.
Do not check glyph_ids because some fonts set the length wrongly.
Also, when all segments have offset 0, glyph_ids is always invalid. It
does not cause any problem so far only because the check misses
equality.
Distinguish between unsorted and overlapped segments.
(tt_cmap4_char_map_linear, tt_cmap4_char_map_binary): New functions to
do "charcode => glyph index" by linear/binary search.
(tt_cmap4_char_index, tt_cmap4_char_next): Use
tt_cmap4_char_map_linear and tt_cmap4_char_map_binary.
(tt_face_build_cmaps): Treat the return value of validator as flags
for cmap.
tt_cmap12_next): New struct/function for fast "next char".
(tt_cmap12_char_map_binary): New function to do "charcode => glyph
index" by binary search.
(tt_cmap12_char_index, tt_cmap12_char_next): Use
tt_cmap12_char_map_binary.
(tt_face_build_cmaps): Check table and offset correctly (equality is
missing).
* builds/amiga/smakefile: Adjusted the compiler options
to the current sources, now really builds the gxvalid, gzip
and psnames modules.
* builds/amiga/src/base/ftsystem.c: The assumed Seek() position
in the file cache was off by one byte which could cause false
errors in font files.
before loading the table directory.
* src/sfnt/ttload.c (tt_face_load_sfnt_header,
tt_face_load_directory): Delay sfnt_dir_check from
tt_face_load_sfnt_header to tt_face_load_directory.
error code.
(sfnt_init): New function to fill in face->ttc_header. A non-TTC font
is synthesized into a TTC font with one offset table.
(tt_face_load_sfnt_header): Use sfnt_init.
Fix an invalid access when the font is TTC and face_index is -1.
of metrics instead of aborting. Patch suggested by Derek Noonburg.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph): Scale
the glyph properly if no hinter is available.
* docs/CHANGES: Mention scaling bug.
patch from Mike Moening <MikeM@RetekSolutions.com>
* src/cff/cffgload.c (cff_face_get_vertical_metrics): New function.
(cff_slot_load): Use cff_face_get_vertical_metrics.
* docs/CHANGES: Updated.
invalid computations, resulting in very weird bugs in TrueType
bytecode hinted fonts
* src/truetype/ttinterp.c: redefined FT_UNUSED_EXEC to not perform
a structure copy each time. Wooot. !
Make compiling instructions in docs/CUSTOMIZE work again.
* builds/unix/unix-cc.in (CPPFLAGS): New variable.
(CFLAGS): Don't include @CPPFLAGS@.
* builds/freetype.mk (FT_CFLAGS): Add CPPFLAGS.