23 KiB
Why not supply a disk image download?
Shipping a Freedombone disk image ready to install on a flash disk would be easy, but disk images are relatively opaque. It would be quite easy to hide something nasty within a disk image and the user might never know. To guard against that possibility installing via the freedombone command is a lot more transparent, since it's really just a bash script. You can check the script code to see exactly what it's doing, and the packages are all downloaded from standard Debian repos (you can even choose which one you trust) or git repos. Doing it this way the system is fully auditable, whereas when shipping a disk image it's harder to be confident that no nefarious extras have been added.
I don't have a static IP address. Can I still install this system?
Yes. The minimum requirements are to have some hardware that you can install Debian onto and also that you have administrator access to your internet router so that you can forward ports to the system which has Freedombone installed.
The lack of a static IP address can be worked around by using a dynamic DNS service. Freedombone uses inadyn, which supports a variety of dynamic DNS providers.
What is the best hardware to run this system on?
It was originally designed to run on the Beaglebone Black, but that should be regarded as the most minimal system, because it's single core and has by today's standards a small amount of memory. Obviously the more powerful the hardware is the faster things like web pages (blog, social networking, etc) will be served but the more electricity such a system will require if you're running it 24/7. A good compromise between performance and energy consumption is something like an old netbook. The battery of an old netbook or laptop even gives you UPS capability to keep the system going during brief power outages or cable re-arrangements, and that means using full disk encryption on the server also becomes more practical.
Out of fashion but still working computer hardware tends to be cheap and readily available, yet still good for providing internet services.
Can I add more users to the system?
Like any other GNU/Linux system you can add more users. It's easy to add users to Owncloud, XMPP or Hubzilla. However, Freedombone is designed primarily to be a single user system (i.e. a personal server) and if there are multiple users then the number of them is expected to be small - perhaps five or less. Freedombone is not intended to be "web scale" in terms of supporting tens or hundreds of users on a single server. Instead, each server can host a small number of users and then the servers federate together as a network of peers.
How do I reset the tripwire?
You will get a daily email which indicates which files on the system have changed recently. Once per week the system will install any updates and those may also show up on the list, along with any changes due to installed packages or changed settings. Watch out for any files which change unexpectedly, which could indicate an intruder. To reset the tripwire:
ssh username@mydomain -p 2222
su
reset-tripwireYou will need to press enter a couple of times. Doing this typically once per week may be a chore, and it's not completely foolproof, but it at least provides some degree of confidence that there have been no intrusions.
Is metadata protected?
Even when using Freedombone metadata analysis by third parties is still possible. They might have a much harder time knowing what the content is, but they can potentially construct extensive dossiers based upon who communicated with your server when. Metadata leakage is a general problem with most current web systems and it is hoped that more secure technology will become available in future. But for now if metadata protection is your main concern using Freedombone won't help.
How do I create email processing rules?
You can administer email in the traditional manner by editing folders or procmail rules, but for convenience some commands are available to make that process simpler. See the relevant manpages for more details.
| freedombone-addlist | Adds a mailing list |
| freedombone-rmlist | Removes a mailing list |
| freedombone-addemail | Transfers emails from an address to a given folder |
| freedombone-rmemail | Removes an email transferal rule |
| freedombone-ignore | Ignores email from an address or with a subject line containing text |
| freedombone-unignore | Removes an ignore rule |
Spamassassin is also available and within Mutt you can use the S (shift+s) key to mark an email as spam or the H (shift+h) key to mark an email as not being spam. So by using a combination of email rules and spam filtering you should be able to avoid any spammers or trolls.
Why isn't dynamic DNS working?
If you run the command:
service inadyn statusAnd see some error related to checking for changes in the IP address then you can try other external IP services. Edit /etc/inadyn.conf and change the domain for the checkip-url parameter. Possible sites are:
https://check.torproject.org/
https://www.whatsmydns.net/whats-my-ip-address.html
https://www.privateinternetaccess.com/pages/whats-my-ip/
http://checkip.two-dns.de
http://ip.dnsexit.com
http://ifconfig.me/ip
http://ipecho.net/plain
http://checkip.dyndns.org/plain
http://ipogre.com/linux.php
http://whatismyipaddress.com/
http://ip.my-proxy.com/
http://websiteipaddress.com/WhatIsMyIp
http://getmyipaddress.org/
http://www.my-ip-address.net/
http://myexternalip.com/raw
http://www.canyouseeme.org/
http://www.trackip.net/
http://icanhazip.com/
http://www.iplocation.net/
http://www.howtofindmyipaddress.com/
http://www.ipchicken.com/
http://whatsmyip.net/
http://www.ip-adress.com/
http://checkmyip.com/
http://www.tracemyip.org/
http://checkmyip.net/
http://www.lawrencegoetz.com/programs/ipinfo/
http://www.findmyip.co/
http://ip-lookup.net/
http://www.dslreports.com/whois
http://www.mon-ip.com/en/my-ip/
http://www.myip.ru
http://ipgoat.com/
http://www.myipnumber.com/my-ip-address.asp
http://www.whatsmyipaddress.net/
http://formyip.com/
http://www.displaymyip.com/
http://www.bobborst.com/tools/whatsmyip/
http://www.geoiptool.com/
http://checkip.dyndns.com/
http://myexternalip.com/
http://www.ip-adress.eu/
http://www.infosniper.net/
http://wtfismyip.com/
http://ipinfo.io/
http://httpbin.org/ipHow do I change my encryption settings?
Suppose that some new encryption vulnerability has been announced and that you need to change your encryption settings. Maybe an algorithm thought to be secure is now no longer so and you need to remove it. You can change your settings by doing the following:
ssh myusername@mydomain -p 2222
su
freedombone-secYou will then be able to edit the crypto settings for all of the installed applications. Be very careful when editing, since any mistake could make your system less secure rather than more.
How do I get a domain name?
Suppose that you have bought a domain name (rather than using a free subdomain on freedns) and you want to use that instead.
Remove any existing nameservers for your domain (or select "custom" nameservers), then add:
NS1.AFRAID.ORG
NS2.AFRAID.ORG
NS3.AFRAID.ORG
NS4.AFRAID.ORGIt might take a few minutes for the above change to take effect. Within freedns click on "Domains" and add your domains (this might only be available to paid members). Make sure that they're marked as "private".
Select "Subdomains" from the menu on the left then select the MX entry for your domain and change the destination to 10:mydomainname rather than 10:mail.mydomainname.
To route email to one of your freedns domains:
editor /etc/mailnameAdd any extra domains which you own, then save and exit.
editor /etc/exim4/update-exim4.conf.confWithin dc_other_hostnames add your extra domain names, separated by a colon ':' character.
Save and exit, then restart exim.
update-exim4.conf.template -r
update-exim4.conf
service exim4 restartYou should now be able to send an email from postmaster@mynewdomainname and it should arrive in your inbox.
How do I get a "real" SSL certificate?
You can obtain a free "official" (as in recognised by default by web browsers) SSL certificate from StartSSL. You will first need to have bought a domain name, since it's not possible to obtain one for a freedns subdomain, so see Using your own domain for details of how to do that. You should also have tested that you can send email to the domain and receive it on the Freedombone (via Mutt or any other email client).
When creating a SSL certificate it's important that the private key (the private component of the public/private pair in public key cryptography) be generated on the Freedombone and remain there. Don't generate the private key via the StartSSL certificate wizard because this means that potentially they may retain a copy of it which could then be exfiltrated either via Lavabit style methodology, "implants", compromised sysadmins or other "side channel" methods. So that the private key isn't broadcast on the internet we can instead generate a certificate request, which is really just a request for authorisation of a public key.
Within StartSSL under the validations wizard validate your domain, which means sending an email to it and confirming a code.
Now we can generate the certificate request as follows.
export HOSTNAME=mydomainname.com
openssl genrsa -out /etc/ssl/private/$HOSTNAME.key 2048
chown root:ssl-cert /etc/ssl/private/$HOSTNAME.key
chmod 440 /etc/ssl/private/$HOSTNAME.key
mkdir /etc/ssl/requestsNow make a certificate request as follows. You should copy and paste the whole of this, not just line by line.
openssl req -new -sha256 -key /etc/ssl/private/$HOSTNAME.key -out /etc/ssl/requests/$HOSTNAME.csrFor the email address it's a good idea to use postmaster@mydomainname.
Use a random 20 character password, and keep a note of it. We'll remove this later.
View the request with:
cat /etc/ssl/requests/$HOSTNAME.csrYou can then click on "skip" within the StartSSL certificates wizard and copy and paste the encrypted request into the text entry box. A confirmation will be emailed back to you normally within a few hours.
Log into your StartSSL account and select Retrieve Certificate from the Tool Box tab. Copy the text.
editor /etc/ssl/certs/$HOSTNAME.crtPaste the public key, then save and exit. Then on the Freedombone.
mkdir /etc/ssl/roots
mkdir /etc/ssl/chains
wget "http://www.startssl.com/certs/ca.pem" --output-document="/etc/ssl/roots/startssl-root.ca"
wget "http://www.startssl.com/certs/sub.class1.server.ca.pem" --output-document="/etc/ssl/chains/startssl-sub.class1.server.ca.pem"
wget "http://www.startssl.com/certs/sub.class2.server.ca.pem" --output-document="/etc/ssl/chains/startssl-sub.class2.server.ca.pem"
wget "http://www.startssl.com/certs/sub.class3.server.ca.pem" --output-document="/etc/ssl/chains/startssl-sub.class3.server.ca.pem"
ln -s "/etc/ssl/roots/startssl-root.ca" "/etc/ssl/roots/$HOSTNAME-root.ca"
ln -s "/etc/ssl/chains/startssl-sub.class1.server.ca.pem" "/etc/ssl/chains/$HOSTNAME.ca"
cp "/etc/ssl/certs/$HOSTNAME.crt" "/etc/ssl/certs/$HOSTNAME.crt+chain+root"
test -e "/etc/ssl/chains/$HOSTNAME.ca" && cat "/etc/ssl/chains/$HOSTNAME.ca" >> "/etc/ssl/certs/$HOSTNAME.crt+chain+root"
test -e "/etc/ssl/roots/$HOSTNAME-root.ca" && cat "/etc/ssl/roots/$HOSTNAME-root.ca" >> "/etc/ssl/certs/$HOSTNAME.crt+chain+root"To avoid any possibility of the certificates being accidentally overwritten by self-signed ones at a later date you can create backups.
mkdir /etc/ssl/backups
mkdir /etc/ssl/backups/certs
mkdir /etc/ssl/backups/private
cp /etc/ssl/certs/$HOSTNAME* /etc/ssl/backups/certs/
cp /etc/ssl/private/$HOSTNAME* /etc/ssl/backups/private/
chmod -R 400 /etc/ssl/backups/certs/*
chmod -R 400 /etc/ssl/backups/private/*Remove the certificate password, so if the server is rebooted then it won't wait indefinitely for a non-existant keyboard user to type in a password.
openssl rsa -in /etc/ssl/private/$HOSTNAME.key -out /etc/ssl/private/$HOSTNAME.new.key
cp /etc/ssl/private/$HOSTNAME.new.key /etc/ssl/private/$HOSTNAME.key
shred -zu /etc/ssl/private/$HOSTNAME.new.keyCreate a bundled certificate which joins the certificate and chain file together.
cat /etc/ssl/certs/$HOSTNAME.crt /etc/ssl/chains/startssl-sub.class1.server.ca.pem > /etc/ssl/certs/$HOSTNAME.bundle.crtAnd also add it to the overall bundle of certificates for the Freedombone. This will allow you to easily install the certificates onto other systems.
mkdir /etc/ssl/mycerts
cp /etc/ssl/certs/$HOSTNAME.bundle.crt /etc/ssl/mycerts
cat /etc/ssl/mycerts/*.crt > /etc/ssl/freedombone-bundle.crt
tar -czvf /etc/ssl/freedombone-certs.tar.gz /etc/ssl/mycerts/*.crtEdit your configuration file.
editor /etc/nginx/sites-available/$HOSTNAMEAdd the following to the section which starts with listen 443
ssl_certificate /etc/ssl/certs/mydomainname.com.bundle.crt;Save and exit, then restart the web server.
service nginx restartNow visit your web site at https://mydomainname.com and you should notice that there is no certificate warning displayed. You will now be able to install systems which don't allow the use of self-signed certificates, such as Hubzilla.
How do I renew a StartSSL certificate?
The StartSSL certificates last for a year. You can check the expiry date of your current certificate/s by going to your site and if you're using Firefox then click on the lock icon, select "more information" then "view certificate".
Before changing any certificates it's a good idea to make a backup of the existing system. Plug in a USB drive, log into the Freedombone and become the root user, then run the command backup. Backing up may take a while, but it ensures that if anything goes wrong and you mess up the certificates then there is a way to restore the previous ones.
Make sure that you have the StartSSL certificate which was created when you initially made an account. You did save it somewhere safe, didn't you? If it's not installed into your browser then in Firefox go to Menu/Preferences/Advanced/View Certificates. Make sure the "Your Cerificates" tab is selected and click "import", then import the StartSSL certificate.
Now go to startssl.com and click on the keys icon on the right hand side to log in. Select the Control panel then Validations Wizard and choose Email address validation. Enter your email address, then wait for the validation email to show up in your inbox. It will contain a code when you can then enter.
Once your email is validated then go to Validations Wizard and choose Domain name validation. Enter your domain name and select postmaster@yourdomainname. After a while you should receive a validation email and you can then enter the code.
Log in to the Freedombone, become the root user, then issue the renew command:
ssh username@mydomainname -p 2222
su
freedombone-renew-cert -h mydomainnameFor the email address it's a good idea to use postmaster@mydomainname.
Use a random 20 character password, and keep a note of it. We'll remove this later.
On the StartSSL site select Certificates Wizard then Web server SSL/TLS Certificate. You can then click on "skip" and then copy and paste the certificate request into the text entry box. You may now need to wait a few hours for a confirmation email indicating that the new certificate was created.
Select Tool Box and then Retrieve Certificate from the list. Make sure to choose the one with the correct expiration date. Copy the text, then on the Freedombone.
editor /etc/ssl/certs/mydomainname.new.crtPaste the public key from the StartSSL site. Save and exit. Then run the renew command again:
freedombone-renew-cert -h mydomainnameThe new certificate will then be installed.
Why use self-signed certificates?
Almost everywhere on the web you will read that self-signed certificates are worthless. They bring up scary looking browser warnings and gurus will advise you not to use them. Self-signed certificates are quite useful though. What the scary warnings mean - and it would be good if they explained this more clearly - is that you have an encrypted connection established but there is no certainty about who that connection is with. The usual solution to this is to get a "real" SSL certificate from one of the certificate authorities, but it's far from clear that such authorities can be trusted. There have been various scandals involving such organisations, and it does not seem plausible to assume that they are somehow immune to the sort of treatment which Lavabit received. So although most internet users have been trained to look for the lock icon as an indication that the connection is secured that belief may not always be well founded.
Security of web sites on the internet is still a somewhat unsolved problem, and what we have now is a less than ideal but good enough to fool most of the people most of the time kind of arrangement. Long term a better solution might be to have a number of certificate authorities in a number of different jurisdictions vote on whether a given certificate actually belongs to a given domain name. Experimental systems like this exist, but they're not widely used. Since the current certificate system has an enormous amount of inertia behind it change could be slow in arriving.
For now a self-signed certificate will probably in most cases protect your communications from "bulk" passive surveillance. Once you've got past the scary browser warning and accepted the certificate under most conditions (except when starting up the Tor browser) you should not repeatedly see that warning. If you do then someone may be trying to meddle with your connection to the server. You can also take a note of the fingerprint of the certificate and verify that if you are especially concerned. If the fingerprint remains the same then you're probably ok.
Why not use the services of $company instead? They took the Seppuku pledge
That pledge is utterly worthless. Years ago people trusted Google in the same sort of way, because they promised not be be evil and because a lot of the engineers working for them seemed like honest types who were "on our side". Post-nymwars and post-PRISM we know exactly how much Google cared about the privacy and security of its users. But Google is only one particular example. In general don't trust pledges made by companies, even if the people running them seem really sincere.
Why does my email keep getting rejected as spam by Gmail/etc?
Welcome to the world of email. Email is really the archetypal decentralized service, developed during the early days of the internet. In principle anyone can run an email server, and that's exactly what you're doing with Freedombone. Email is very useful, but it has a big problem, and that's that the protocols are totally insecure. That made it easy for spammers to do their thing, and in response highly elaborate spam filtering and blocking systems were developed. Chances are that your emails are being blocked in this way. Sometimes the blocking is so indisciminate that entire countries are excluded. What can you do about it? Unless you control the block list at the receiving end probably you can't do anything. There is zero accountability for such blocking, and you can't just contact someone and say "hey, I'm not a spammer". This system works well for the big internet companies because it effectively centralises email to a few well-known brand names and keeps any independent servers out.
So the situation with email presently is pretty bad, and there's a clear selection pressure against decentralization and towards only a few companies controlling all email services. Longer term the solution is to have more secure protocols which make spamming hard or expensive. Bitmessage is one such system. As an immediate practical workaround you could try buying a domain name and then linking it to your dynamic DNS account (freeDNS, etc) in the hope that the blocking is against dynamic DNS domain names, but there is no guarantee that will work and often blocking may be based upon IP address ranges about which there is little you can do.