David Binderman <dcb314@hotmail.com> reported the following compiler warning,
which is a real bug in ngIRCd, thanks!
conn.c:2077:55: warning: logical not is only applied to the left hand
side of comparison [-Wlogical-not-parentheses]
ngIRCd relaxes its flood protection for users having the user mode "F" set
and allows them to rapidly send data to the daemon. This mode is only
settable by IRC Operators and can cause problems in the network -- so be
careful and only set it on "trusted" clients!
User mode "F" is used by Bahamut for this purpose, for example, see
<http://docs.dal.net/docs/modes.html#4.9>.
ngIRCd uses "command throttling" and "bps throttling" (bytes per second).
The states are detected in different functions, Conn_Handler() and
Read_Request(), but handle the actual "throttling" in a common function:
this enables us to guarantee consistent behavior and to disable throttling
for special connections in only one place, eventually.
Change all #define's to follow the form
#define DEBUG_xxx {0|1}
to disable (0, default) or enable (1) additional debug messages.
And somewhat enhance some DEBUG_BUFFER messages.
The "deheader" tool (<http://www.catb.org/~esr/deheader/>) has been
used to find unused #include directives as well as missing ones.
Tested on:
- A/UX 3.1.1
- ArchLinux (2014-03-17)
- Debian GNU/Hurd
- Debian GNU/Linux 6.0.9
- Debian GNU/Linux 7.4
- Fedora 20
- FreeBSD 9.2
- OpenBSD 4.8
- OpenBSD 5.1
- OS X 10.9
- Solaris 11
C99 states that vsnprintf() "returns the number of characters that
would have been printed if the n were unlimited"; but according to the
Linux manual page "glibc until 2.0.6 would return -1 when the output
was truncated" -- so we have to handle both cases ...
In some error cases conn_id will be left as SERVER_WAIT and
subsequently ignored in Check_Servers(). Ensure conn_id is set to
NONE before returning from New_Server() if we couldn't establish
the connection.
Prompted by a report from gabrielgi-at-gmail-dot-com.
Without this patch, ngIRCd logged the "IDENT lookup for connection X:
no result"-message even when IDENT lookups have been disabled using the
"Ident = no" configuration option, which is a little bit misleading.
Reported by "btwe" in #ngircd.
There have been code paths that ignored the return code of Handle_Write()
when sending "notice auth" messages to new clients connecting to the
server. But because Handle_Write() would have closed the client connection
again if an error occurred, this would have resulted in new errors and
assert()'s later on that could have crashed the server (denial of service).
Only setups having the configuration option "NoticeAuth" enabled are
affected, which is not the default.
CVE-2013-5580.
Fix the cb_clientserver_ssl() callback function to not read in and store SSL
encrypted client data before the asynchronous DNS resolver sub-process has
finished: This could have resulted in discarding the resolved client hostname
and IDENT reply afterwards, because in some situations (timing dependent) the
NICK and USER commands could have already been read in from the client,
stored in the buffer, and been processed.
Thanks to Julian Brost for reporting the issue and testing, and to Federico
G. Schwindt <fgsch@lodoss.net> for helping to debug it!
This fixes the following warning using Apple LLVM version 4.2
(clang-425.0.24) on OS X:
src/ngircd/conn.c:157:9: Implicit conversion loses integer
precision: 'long' to 'int'
This patch makes sure that ngIRCd doesn't try to handle sockets of
unsupported types, for example of AF_INET6 sockets when ngIRCd isn't
compiled with support for IPv6 ...
This patch implements a new configuration option "IdleTimeout" in the
[Limits] section of the configuration file which can be used to set a
timeout (in seconds) after which the whole daemon will shutdown when no
more connections are left active after handling at least one client.
The default is 0, "never".
This can be useful for testing or when ngIRCd is started using "socket
activation" with systemd(8), for example.
This patch enables ngIRCd to work with listening sockets already
initialized and passed-in by systemd(8) and hereby to support on-demand
"socket activation".
systemd(8) uses two environment variables to pass information about the
sockets to ngIRCd, LISTEN_PID and LISTEN_FDS, and this mechanism only
kicks in when both variables are set. In all other cases, and therefore
in most installations out there, nothing changes at all.
Please note:
If socket activation is in effect, ngIRCd will not initialize any (other)
soeckets on its own! All sockets must be configured in the systemd(8)
socket unit configuration file in this case, see ./contrib/ngircd.socket
for example.
Probably it would be interesting to match passed-in sockets to configured
listening sockets and to initialize all the remaining ones not already
set up by systemd(8), but this is kept back for an other patch ...
See
- <http://0pointer.de/blog/projects/socket-activation.html>
- <http://0pointer.de/blog/projects/socket-activation2.html>
- <http://www.freedesktop.org/software/systemd/man/systemd.socket.html>
Make sure that all log messages end with a correct punctuation mark.
The rules for formatting log messages are:
1. Add punctuation marks to all messages passed to the actual logging
functions like Log() and LogDebug().
2. Don't add any punctuation marks to messages that are stored in
variables for later use or are passed over the network.
3. IP addresses, DNS host names and IRC server names should be quoted.
4. Messages originating in the network should be quoted (at least if
they are "untrusted" or variable).
Most probably this patch doesn't fix all mistakes, but it should be a
good starting point ...
If two servers try to link each other, there was a time frame that
could result in one connection overwriting the other, e. g. the incoming
connection overwriting the status of the outgoing one. And this could
lead to all kind of weirdness (even crashes!) later on.
So now such incoming connections are dropped. But this most probably
prevents the two servers from linking until timing changes somehow
(network latency?) because each server drops the incoming connection of
the other one, so no connection survives in the end.
But this has to be addressed by an other patch ...
This fixes the following warning message when building without SSL support:
conn.c: In function "New_Connection":
conn.c:1365: warning: unused parameter "IsSSL"
Introduced by commit 01b62202.
Conn_StartLogin() is called after the connection has been established and
fully innitialized, including the SSL handshake, for example.
Up to this patch, the "NoticeAuth" option broke the SSL handshake ...
This patch series converts the statically allocated password buffer in the
CLIENT structure into a dynamically (and only when needed) allocated buffer
which is referenced by the CONNECTION structure.
This a) saves memory for clients not using passwords at all and b) allows
for "arbitrarily" long passwords.
By Brett Smith (5) and Alexander Barton (2).
* 'move-connection-password' of git://arthur.barton.de/ngircd-alex:
Login_User(): use "conn" insted of calling Client_Conn(Client)
Free already saved password when storing a new one
Indentation and style fixes.
Connection password is not constant.
Implementation clean-ups.
Dynamically allocate memory for connection password.
Move client password from the Client to the Connection struct.
This is a relatively naive implementation, basically doing the bare minimum
necessary to make the switchover go. Subsequent commits can focus on
improving the implementation.
Don't try to establish an outgoing server link after DNS lookup when this
server re-connected on its own in the meantime.
In addition, log a warning message if we try to update the connection
index of an already connected server structure -- and ignore it.
Up to now, both behaviour could lead to a race when the remote server
connects to this daemon while it still prepares the outgoing connection:
- The local server prepares the new outgoing connection ...
- in the meantime the remote server becomes connected and registered.
- Now the new outgoing connection overwrites the (correct) socket handle,
- then the 2nd connection becomes disconnected: "already registered",
- and the 1st connection becomes unhandled ("gets lost") because the
configuration structure is reset because of the wrong socket handle.
This patch hopefully fixes all these problems.
Only alphanumeric characters are allowed in the user name, so ignore
all IDENT replies that would violate this rule and use the one supplied
by the USER command.
Alexander Barton