The SVSNICK command allows other servers (and services on
"pseudo-servers") to forcefully change nicknames of remote users.
Syntax: ":<from> SVSNICK <oldnick> <newnick>"
The SVSNICK command itself doesn't change the nickname, but it becomes
forwarded to the server to which the user is connected to. And then this
server initiates the real nickname changing using regular NICK commands.
This allows to still run networks with old servers not supporting the
SVSNICK command, because SVSNICK commands for nicknames on such servers
are silently ignored and don't cause a desync of the network.
This reverts a not intentional code change and fixes the following compiler
warning message (tested with gcc 4.4.5):
irc-server.c: In function "IRC_SERVER":
irc-server.c:142: warning: suggest parentheses around operand of "!"
or change "&" to "&&" or "!" to "~"
Add randomly up to 15 seconds to the reconnect delay for outgoing server
links when the connection has been "short" and therefore the "ConnectRetry"
delay is being enforced.
This should make it even more unlikely that two servers deadlock each
other when both are trying to connect to the other one at the same time,
for example in test environments.
If two servers try to link each other, there was a time frame that
could result in one connection overwriting the other, e. g. the incoming
connection overwriting the status of the outgoing one. And this could
lead to all kind of weirdness (even crashes!) later on.
So now such incoming connections are dropped. But this most probably
prevents the two servers from linking until timing changes somehow
(network latency?) because each server drops the incoming connection of
the other one, so no connection survives in the end.
But this has to be addressed by an other patch ...
This is how ngIRCd up to release 19.2 behaved; "bug" introduced by commit
67e882, "configure.in: require autoconf 2.67 and automake 1.11", which
changed the "PACKAGE_NAME" to "ngIRCd"; so use "PACKAGE" which still is
the lowercase version for initializing syslog logging.
Remote servers are always allowed to change all channel topics,
and IRC Operators are allowed to change all channel topics if the
configuration option "OperCanUseMode" is enabled.
Bug introduced by commit 7b01bb8 and reported by DNS777.
Currntly ngIRCd supports 13 user and 15 channel modes, because there
have been quite a few additions since our last release. But our data
structures can only hold 15 user and -- even worse! -- only 9 channel
modes! So enlarge the buffers to 20 bytes (actually 21 including NULL)
to allow storing of all mode characters and to have some space left
for more modes to come ...
(cherry picked from commit 8996d777621d88d4bcc439ab4792b2814920687f)
Replaced error message for channel mode +M with ERR_NEEDREGGEDNICK_MSG
(used by Bahamut, inspircd, ircu & Unreal too) and using numeric 477
and the msg simliar like inspircd.
Replaced the error message ERR_CANNOTSENDTONICK_MSG for user mode +b
with ERR_NONONREG_MSG and using numeric 486, similar like unrealircd.
(cherry picked from commit 55a61ab17f63a9e757b7c7598c31b98ce5a132e8
and commit 3737d9ab7da1ea0485cefc07c65dc5308bf0db02)
Don't abort on "single user operating systems" that don't know more than
one user account and therefore can't change user and group IDs.
Currently, the only such system supported by ngIRCd is Haiku, a BeOS
clone.
When a user has set mode "b", all private messages and notices to this
user are blocked if they don't originate from a registered user, an IRC Op,
server or service. The originator gets an error numeric sent back in this
case, ERR_CANNOTSENDTONICK_MSG(976), which is/was(?) used by KineIRCd, too.
This closes bug #144.
This error message is not only used if one can not send to a channel
because it is moderated, but for _all_ reasons when a message can not
be delivered (moderated, banned, no external messages, ...), so strip
the "(+m) -- Moderated" part of the error message again.
Bug introduced by commit 9a82304a.
Not only show RPL_WHOISHOST_MSG to local IRC opreators, but show
it to all IRC operators in the network. And don't show it to anybody
if the "more privacy" configuration option is enabled.
This closes bug #134.
Implement numeric RPL_WHOISMODES_MSG(379) and show user modes in the
reply of the WHOIS command for the user himself or, if MorePrivacy
isn't set, for request initiated by an IRC operator.
Numeric 379 is used by Unreal and InspIRCd for this purpose, too.
Closes bug #129.
If the new channel mode "V" is set, the INVITE command becomes invalid
and all clients get the new ERR_NOINVITE_MSG(518) reply.
Unreal and InspIRCd uses this mode, too.
This closes bug #143.
This patch fixes unsetting of channel user mode "+a" (channel admin)
and adds a better error message: without this patch, a channel admin is
unable to unset this mode.
This closes bug #142.
This closes bug #109.
* bug109-CHARCONV:
Debian: require "telnet" or "telnet-ssl" for building
Debian ngircd-full[-dbg]: enable CHARCONV
Add "CHARCONV" to "feature string" when enabled
Implement new IRC+ "CHARCONV" command
Added new configure option "--with-iconv"
Conflicts:
src/ngircd/messages.h
Both modes protect users from channel kicks: only IRC operators and
servers can kick users having mode "q" or in channels with mode "Q".
Original patch by DNS777 <dns@rbose.org>, thanks!
This closes bug #141.
Patches from Federico G. Schwindt, thanks!
(cherry picked from commit a44b7126227ba1118ec02b399e31b08102af5e8c
and 6fbe9583753b2620da275676cde46a89cb4d06c2)
Allow users to "cloak" their hostname only when the configuration
variable "CloakHostModeX" (introduced in 19.2) is set. Otherwise, only
IRC opertators, other servers, and services are allowed to set mode +x.
This prevents regular users from changing their hostmask to the name
of the IRC server itself, which confused quite a few people ;-)
This fixes bug #133.
If disabled, IRC operators don't become channel operators in persistent
channels when joining. Enabled by default, which has been the behavior
of ngIRCd up to this patch.
Closes bug #135.
(Cosmetic fixes by Alex.)
As long as 'MorePrivacy' isn't enabled in the configuration file, local
IRC operators can see secret (+s) channels when using the LIST command.
Closes bug #136.
* automake-am11-am12:
autogen.sh: detect automake version format a.b.c and a.b
configure.ng: don't require GIT tree to detect version string
Include .mailmap file in distribution archives
Include all build-system files into distribution archives
Change build system to support new and old GNU automake
By Alexander Barton (5) and Sebastian Köhler (2)
* bug92-xop:
Fix NAMES/WHO response when client has multi-prefix
Fix prefix of "halfop" when "multi-prefix" is active
Clean up doc/.gitignore
doc/Modes.txt: add version number to new channel modes
Fix some "whitespace glitches"
Tests and documentation for xop
Implemented xop support
Conflicts (because of "multi-prefix fix"):
src/ngircd/irc-info.c
This fixes bug #92 "ngircd does not support XOP usermodes".
Starting with GNU automake 1.12, the "de-ANSI-fication support" has been
removed, which ngIRCd used to enable building itself on very old systems.
Now the problem is, that using automake >= 1.12 isn't working because of
the now unsupported M4 macros. Therefore the solution that this patch
implements is to dynamically generate the automake input files with our
own ./autogen.sh script:
configure.ng => configure.in
Makefile.ng => Makefile.am
This is quite an ugly approach, but it works and enables us to:
1. use current automake >= 1.12 for development and "private builds",
2. still build distribution archives using automake 1.11.x that have
"de-ANSI-fication support" enabled in the generated Makefile's.
And if you are using Makefile's generated with a automake version newer
than 1.11.x (without "de-ANSI-fication support"), the ./configure script
warns you not to use this generated build system to generate distribution
archives.
Drawback of this patch: you MUST use our autogen.sh script, you can't call
the autoconf/automake commands directly any more; but autoreconf should
still work ...
With this patch, the SSL subsystem will only be initialized if at least
one SSL ports is configured; so you won't get "SSL initialization failed"
messages if you didn't configured it at all.
And if SSL initialization fails, no SSL listen ports will be enabled
later which never could establish a working SSL connection at all ...
Update GNU autoconf and automake infrastructure.
Tested on modern systems as well as Apple A/UX :-)
* autoconf-update:
AUTOMAKE_OPTIONS: fix ansi2knr option, include path
Don't use AC_FUNC_MALLOC and AC_FUNC_REALLOC
Make our own targets "silent", if enabled
configure.in: use AC_CHECK_{FUNCS|HEADERS}_ONCE
Updated config.{guess|sub} to version 2012-08-14
Make autogen.sh more verbose when VERBOSE=1 is set
configure.in: use AC_SEARCH_LIBS (not AC_CHECK_LIB)
configure.in: use AS_HELP_STRING macro
configure.in: use AC_CANONICAL_HOST (not AC_CANONICAL_TARGET)
configure.in: inttypes.h is an optional header file
Use HAVE_SETSID #define when testing for setsid()
Don't include <stdint.h>, it is included by "portab.h"
Don't check type.h availability, it is required
configure.in: Use AC_CONFIG_FILES macro
configure.in: Don't use AC_C_PROTOTYPES
configure.in: Update checks for required and optional features
configure.in: require autoconf 2.67 and automake 1.11
configure.in: sort some lists (templates, output, ...)
This fixes the following warning message when building without SSL support:
conn.c: In function "New_Connection":
conn.c:1365: warning: unused parameter "IsSSL"
Introduced by commit 01b62202.
* 'xop' of https://github.com/kart0ffelsack/ngircd:
Tests and documentation for xop
Implemented xop support
Conflicts (because of merge of the 'cmode-M' branch):
src/ngircd/channel.c
src/ngircd/defines.h
src/ngircd/messages.h
ngIRCd is a long-running process and changes its working directory to "/" to
not block mounted filesystems and the like when running as daemon ("not in the
foreground"); therefore the path to the configuration file must be relative to
"/" (or the chroot() directory), which basically is "not relative", to ensure
that "kill -HUP" and the "REHASH" command work as expected later on.
This fixes parts of bug #127.
It makes no sense to limit the list size when doing WHO for a channel
and not to return all the users in that channel, so I removed the check.
But if there are more than MAX_RPL_WHO(25) replies, the client requesting
the list will be "penalized" one second more (then 2 in total).
This fixes bug #125.
Some systems, notably FreeBSD 4.x, do have the kqueue() function but
lack the definition of EV_SET() in their header files -- but don't
worry, we can #define it on our own ;-)
Definition taken from /usr/include/sys/event.h of FreeBSD 8.1.
Patch tested on FreeBSD 4.1 by Götz Hoffart. Thanks!
Conn_StartLogin() is called after the connection has been established and
fully innitialized, including the SSL handshake, for example.
Up to this patch, the "NoticeAuth" option broke the SSL handshake ...
This numeric is sent to the client each time it changes its displayed
hostname using "MODE +/-x", and if "CloakHost" is set right after the
MOTD has been sent.
Not only cloak the hostname in Client_MaskCloaked(), but also in
Client_HostnameCloaked() -- so move the actual cloaking to this function
and call it in Client_MaskCloaked() to get the (cloaked) hostname.
This fixes USERHOST not displaying the correctly cloaked hostname,
for example.
This patch series allows ngIRCd to support the user mode "B" ("Bot flasg"):
it is settable and unsettable by every (non-restricted) client.
According to DNS777, this is how Unreal and InspIRCd do behave, so do we :-)
By Alexander Barton (1) and DNS777 (1)
* umode-B:
Add new user mode "B" to doc/Modes.txt
Implement an Unreal-like user mode "B" ("Bot mode")
By Alexander Barton (2) and DNS777 (1)
* cmode-M:
Add new channel mode "M" to doc/Modes.txt
Remove Can_Send_To_Channel_Identified()
Implement channel mode "M"
Two fixes here: IRC_Send_NAMES was checking the capability of the
wrong client when responding, and it didn't return any prefix for
clients that had either +v or +o but not both.
By Alexander Barton (1) and DNS777 (1)
* better-chan-errors:
Remove unused ERR_CANNOTSENDTOCHAN2_MSG message
Add some more information to channel error numerics
This patch series converts the statically allocated password buffer in the
CLIENT structure into a dynamically (and only when needed) allocated buffer
which is referenced by the CONNECTION structure.
This a) saves memory for clients not using passwords at all and b) allows
for "arbitrarily" long passwords.
By Brett Smith (5) and Alexander Barton (2).
* 'move-connection-password' of git://arthur.barton.de/ngircd-alex:
Login_User(): use "conn" insted of calling Client_Conn(Client)
Free already saved password when storing a new one
Indentation and style fixes.
Connection password is not constant.
Implementation clean-ups.
Dynamically allocate memory for connection password.
Move client password from the Client to the Connection struct.
The "ServiceMask" variable in "Server" blocks now can handle more than
one mask using the new MatchCaseInsensitiveList() function.
This makes marking "service clients" much more specific, which is a
good thing per se, but which is the prerequisite for reasonably
blocking these nick names, too (see commit a6dd2e3 for details).
This patch introduces the new function Conf_NickIsBlocked() which checks
if a given nick name matches with the "service mask" of a configured server.
And Client_CheckNick() uses this information to deny such names for regular
IRC users.
So nick names intended for IRC services are more protected and can't be used
by regular users even when the "services pseudo-server" isn't connected to
the network.
But please note:
Up to now, there can be only one "ServiceMask" pattern per server, which
most probably blocks much more nick names than really required ...
So "ServiceMask" should allow more than one pattern which can be more
specific, and most probably it should be possible to block nick names in
the global server configuration as well.
Nick names introduced by other servers/services are never restricted.
This is a relatively naive implementation, basically doing the bare minimum
necessary to make the switchover go. Subsequent commits can focus on
improving the implementation.
3 new channel user modes have been added.
Half Op: +h(Prefix: %) can set the channel modes +imntvIbek
and kick all +v and normal users.
Admin: +a(Prefix: &) can set channel modes +imntvIbekoRsz and kick all
+o, +h, +v and normal users.
Owner: +q(Prefix: ~) can set channel modes +imntvIbekoRsz and kick all
+a, +o, +h, +v and normal users
Implemented support for hashed hostnames for CloakHost. The admin can
use '%x' in both the CloakHost and CloakHostModeX setting. The config
option CloakHostModeX was renamed to CloakHostSalt. This salt is used
for both cloaking options.
CloakHostModeX can now contain '%x'. It will be replace by the hash of
the original client hostname. The new config option CloakHostModeXSalt
defines the salt for the hash function. When CloakHostModeXSalt is not
set a random salt will be generated after each server restart.
Spelling fix in defines.h
Don't try to establish an outgoing server link after DNS lookup when this
server re-connected on its own in the meantime.
In addition, log a warning message if we try to update the connection
index of an already connected server structure -- and ignore it.
Up to now, both behaviour could lead to a race when the remote server
connects to this daemon while it still prepares the outgoing connection:
- The local server prepares the new outgoing connection ...
- in the meantime the remote server becomes connected and registered.
- Now the new outgoing connection overwrites the (correct) socket handle,
- then the 2nd connection becomes disconnected: "already registered",
- and the 1st connection becomes unhandled ("gets lost") because the
configuration structure is reset because of the wrong socket handle.
This patch hopefully fixes all these problems.
Only alphanumeric characters are allowed in the user name, so ignore
all IDENT replies that would violate this rule and use the one supplied
by the USER command.
Only alphanumeric characters are allowed in the user name, so terminate
the connection if any "strage" characters have been supplied by the user.
This is how other IRC daemons (like ircd2.11 and ircd-seven) behave ...
This fixes the following warnings with GCC 4.4.5 on Linux:
irc-login.c: In function ‘IRC_PASS’:
irc-login.c:92: warning: implicit declaration of function ‘strlen’
irc-login.c:92: warning: incompatible implicit declaration of built-in function ‘strlen’
irc-login.c:113: warning: incompatible implicit declaration of built-in function ‘strlen’
irc-login.c:129: warning: implicit declaration of function ‘strchr’
irc-login.c:129: warning: incompatible implicit declaration of built-in function ‘strchr’
irc-login.c:133: warning: implicit declaration of function ‘strcmp’
irc-login.c: In function ‘IRC_SERVICE’:
irc-login.c:556: warning: incompatible implicit declaration of built-in function ‘strchr’
login.c: In function ‘Login_User’:
login.c:131: warning: implicit declaration of function ‘strcmp’
* capabilities:
"multi-prefix" capability 2/2: adjust NAME and WHO handlers
"multi-prefix" capability 1/2: implement complete CAP infrastructure
IRC_Send_NAMES(): Code cleanup
New function Client_CapSet() in addition to Client_Cap{Add|Del}
"CAP REQ" starts capability negotiation and delays user registration
Correctly handle "CAP END", new client type CLIENT_WAITCAPEND
Implement core IRC capability handling and "CAP" command
New "login" source file
Introduce_Client() => Client_Introduce(), and move it to client.c
Now ngIRCd is able to handle "CAP LS", "CAP REQ", "CAP LIST", and
"CAP CLEAR" commands.
"multi-prefix" can be set/unset, but has no functionality - yet!
This fixes the following warning of clang:
/src/ngircd/lists.c:152:44:
warning: size argument in 'strlcpy' call appears to be size of the
source; expected the size of the destination [-Wstrlcpy-strlcat-size]
But it isn't a real problem, because the size of the source always is the
same than the size of the destination ...
This patch implements the core functions to support "IRC Capabilities"
and the IRC "CAP" command as used by other servers and specified here:
<http://www.leeh.co.uk/draft-mitchell-irc-capabilities-02.html>.
It enables ngIRCd to support the defined handshake, but it doesn't
implement any capabilities, so "CAP LS" and "CAP LIST" always return
the empty set and "CAP REQ ..." always fails with "CAP NAK".
Rename Hello_User[_PostAuth] to Login_User[_PostAuth] and move it to the
new login.c; and move cb_Read_Auth_Result(), too. This will enable further
code to easily call Login_User() when required.
Up to now, ngIRCd silently ignored permission denied errors when trying
to enable a chroot setup: only the "not running chrooted" message became
logged later on.
This patch lets ngIRCd exit with a fatal error when the chroot can't
be enabled on startup -- this is the much safer bevahiour!
This fixes the following warning with gcc 4.6.3.:
irc-mode.c: In function "Channel_Mode":
irc-mode.c:947:26: error: "list" may be used uninitialized
in this function
irc-mode.c:884:25: error: "list" may be used uninitialized
in this function
(The variable has never been used uninitialized, so don't worry)
Start "regular" logging not until the configuration file has been read in
and "SyslolgFacility" is set, and log all configuration errors using the
generic "daemon" facility.
So if there are no configuration errors, logging starts right after parsing
the configuration and we log the configuration file used _after_ reading it.
But this is no problem because every configuration error message includes
the configuration file name as well.
(The "double hello" has been introduced by commit 3641e51109)
Syslog logging has been initialized before reading the configuraton
file, so ngIRCd always used the default facility and ignored the
"SyslogFacility" configuration option.
Thanks to Patrik Schindler for reporting this issue!
This patch updates the limits for handling commands from a remote server:
- "<user count> / 5 + <min>" using "<min>=10" during normal operation,
- the above count multiplied with 5 while servers are syncing.
The intention is to a) make the limit dependent of the number of users
in the network (the more users, the more commands required to sync) and
b) to significantly rise this limit while servers are joining the network
to make the login and synchronization faster.
At the end of sending all "state" to the remote server, a PING command
is sent to request a PONG reply. Until then, no "regual" PING was sent,
so Conn_LastPing(<connection>) is null and now becomes non-null in the
PONG command handler.
So the servers are still synchronizing when Conn_LastPing(<connection>)
is 0, which could easily be tested.
The numeric RPL_WHOISHOST_MSG(378) returns the DNS hostname (if
available) and the IP address of a client in the WHOIS reply.
Only the user itself and local IRC operators get this numeric.
This allows to use "*!<user>@<host>" or "*!*@<host>" masks to reject
clients even before receiving PASS, NICK and USER commands and before
forking authentication child processes which reduces resource usage.
This allows a channel operator to define exception masks that allow users
to join the channel even when a "ban" would match and prevent them from
joining: the exception list (e) overrides the ban list (b).
If the target user of a PRIVMSG or NOTICE command has the user mode 'C'
set, it is required that both sender and receiver are on the same channel.
This prevents private flooding by completely unknown clients.
- Check correct list for duplicates when adding items.
- Don't generate any messages when adding duplicates or removing
non-existing items (this is how ircd-seven and ircu behave).
- Code cleanup: Add_Ban_Invite(), Del_Ban_Invite().
Commit 565523cb allowed processing of further channel names given to the
JOIN command when a single name was invalid.
After this patch, the JOIN command handler continues to process channel
name lists even after errors like "channel is full", "too many channels",
and the like and generates appropriate error messages for all the
channels given by the client.
Limit the MODE command to handle a maximum of MAX_CMODES_ARG (5) channel
modes that require an argument (+Ibkl) per call.
Please note: Further modes that require arguments are silently ignored
and end the handling of any further modes.
This is similar to the behavior of ircd2.11 (silently ignores but seems
to handle other modes) as well as ircd-seven (silently ignores but handles
some(!) other modes) ...
The assert(client != NULL) got triggered during our tests, so there is
an error path that resulted in the connection being still established
(sock >= 0) but the client structure already freed.
So Conn_Write() should handle it!
This reduces the possibility of flooding channels with commands like
"PRIVMSG/NOTICE #a,#n,#c,... :message" a little bit.
Problem noticed by Cahata -- thanks!
Until now, the penalty time has only been set when longer as the
already set one, so it didn't accumulate.
And add documentation for and clean up code in Conn_SetPenalty() and
Conn_ResetPenalty() functions.
This partly closes bug #118. ngIRCd still starts up even when
Server{UID|GID} is invalid: then the daemon falls back to "nobody"
when running with root(0) privileges (as before).
commit 15fec92ed7
(Update list item, if it already exists) can make ngircd
crash because 'Reason' can be NULL, as reported by
Cahata on the ngircd mailing list.
Doesn't affect any released ngircd versions.
Also, make sure that we do not pass NULL as arguments
to a '%s' printf-like function.
When JOIN is received with more than one channel name, don't stop
processing on the first error (e.g. bad name, wrong channel key, ...)
but report an error and continue with the other given channel names.
Reported by Cahata -- thanks!
When "PAMIsOptional" is set, clients not sending a password are still
allowed to connect: they won't become "identified" and keep the "~"
character prepended to their supplied user name.
This fixes two bugs:
- "WHO <nick>" returned nothing at all if the user was "+i"
(reported by Cahata, thanks).
- "WHO <nick|nickmask>" returned channel names instead of "*"
when the user was member of a (visible) channel.
Clean up code and add documentation as well.
Rename Channel_Count() to Channel_CountVisible() and only count channels
that are visible to the requesting client, so the existence of secret
channels is no longer revealed by using LUSERS.
Reported by Cahata -- thanks!
Unknown user and channel modes no longer stop the mode parser, but are
simply ignored. Therefore modes after the unknown one are now handled.
This is how ircd2.10/ircd2.11/ircd-seven behave, at least.
Reported by Cahata -- thanks!
This fixes:
irc-oper.c: In function ‘IRC_xLINE’:
irc-oper.c:429: warning: ‘class’ may be used uninitialized in this function
irc-oper.c:430: warning: ‘class_c’ may be used uninitialized in this function
This fixes the problem that ngIRCd can't do any IDENT lookups because
of the socket has already been closed in the child process.
The bug has been introduced starting with ngIRCd 17 ... :-(
(commit ID 6ebb31ab35)
- User mode "R": indicates that the nick name of this user is "registered".
This mode isn't handled by ngIRCd itself, but must be set and unset by
IRC services like Anope.
- Channel mode "R": only registered users (having the user mode "R" set)
are allowed to join this channel.
DEBUG_BUFFER is off by default and therefore disables these messages:
- "Handle_Write() called for connection XX, YY bytes pending ..."
- "Connection XX: ZZ bytes left in read buffer."
* ServerMode:
Handle channel user modes 'a', 'h', and 'q' from remote servers
Handle unknown channel modes on server links
Handle unknown user modes on server links
IRC_MODE(), Client_Mode(): code cleanup [2/2]
Enlarge client user mode buffer, reduce client flags buffer
Infom clients when other servers change their user modes
IRC_MODE(), Client_Mode(): code cleanup [1/2]
These channel user modes aren't used for anything at the moment, but
ngIRCd knows that these three modes are "channel user modes" and not
"channel modes", that is that these modes take an "nick name" argument.
Like unknown user and channel modes, these modes are saved and forwarded,
but ignored otherwise.
We have to enlage our user mode buffer, so we can handle even unknown
user modes in the future; and reduce the client flags buffer, because
I can't imagine why we ever would need ~100 flags!?
Now we support up to 15 user modes (was: 8) and up to 15 flags (was: 99).
So in the end, we even save 99-15+8-15=77 bytes for each client structure!
Alexander Barton