3 new channel user modes have been added.
Half Op: +h(Prefix: %) can set the channel modes +imntvIbek
and kick all +v and normal users.
Admin: +a(Prefix: &) can set channel modes +imntvIbekoRsz and kick all
+o, +h, +v and normal users.
Owner: +q(Prefix: ~) can set channel modes +imntvIbekoRsz and kick all
+a, +o, +h, +v and normal users
Implemented support for hashed hostnames for CloakHost. The admin can
use '%x' in both the CloakHost and CloakHostModeX setting. The config
option CloakHostModeX was renamed to CloakHostSalt. This salt is used
for both cloaking options.
CloakHostModeX can now contain '%x'. It will be replace by the hash of
the original client hostname. The new config option CloakHostModeXSalt
defines the salt for the hash function. When CloakHostModeXSalt is not
set a random salt will be generated after each server restart.
Spelling fix in defines.h
This patch implements the core functions to support "IRC Capabilities"
and the IRC "CAP" command as used by other servers and specified here:
<http://www.leeh.co.uk/draft-mitchell-irc-capabilities-02.html>.
It enables ngIRCd to support the defined handshake, but it doesn't
implement any capabilities, so "CAP LS" and "CAP LIST" always return
the empty set and "CAP REQ ..." always fails with "CAP NAK".
If the target user of a PRIVMSG or NOTICE command has the user mode 'C'
set, it is required that both sender and receiver are on the same channel.
This prevents private flooding by completely unknown clients.
When "PAMIsOptional" is set, clients not sending a password are still
allowed to connect: they won't become "identified" and keep the "~"
character prepended to their supplied user name.
The default of "PAM" is "yes" when ngIRCd has been configured to use it,
so show the correct default value in the sample configuration file.
Closes#119.
* newconfig:
sample-ngircd.conf: "SyslogFacility" should be commented out
Move SSL-related configuration variables to new [SSL] section
CheckFileReadable(): only check when a filename is given ...
PAM: make clear which "Password" config option is ignored
Really remove [Features] in our manual pages
INSTALL: document changed location of configuration variables
Update sample config file and manual page for new config structure
Testsuite: update configuration files for new config file format
Display configuration errors more prominent on "--configtest"
conf.c: code cleanup
Check for redability of SSL-related files like for MOTD file
Restructure ngIRCd configuration, introduce [Limits] and [Options]
this patch contains:
* Fix for Conf_CloakUserToNick to make it conceal user details
* Adds MorePrivacy-feature
MorePrivacy censors some user information from being reported by the
server. Signon time and idle time is censored. Part and quit messages
are made to look the same. WHOWAS requests are silently dropped. All
of this is useful if one wish to conceal users that access the ngircd
servers from TOR or I2P.
problem is that some clients refuse to connect to severs that only offer
1024. For interoperability it would be best to just use 4096, but that
takes minutes, even on current hardware.
* CloakUserHost:
Add a note not to use a percent sign ("%") in CloakHost variable
Rename ClientHost to CloakHost, and ClientUserNick to CloakUserToNick
Don't use "the.net" in sample-ngircd.conf, use "example.net"
ngircd.conf.5: document "ClientHost" and "ClientUserNick"
Move "ClientHost" and "ClientUserNick" to end of [Global] section
ClientUserNick setting
ClientHost setting
* QuitOnHTTP:
Only "handle" HTTP commands on unregistered connections
Don't use IRC_QUIT_HTTP() if STRICT_RFC is #define'd
IRC_QUIT_HTTP(): enhance error message
Move IRC_QUIT_HTTP() below IRC_QUIT()
quit on HTTP commands: GET & POST
* bug72-WHOIS-List:
Add "whois-test" to testsuite and distribution archive
Add support for up to 3 targets in WHOIS queries.
The percent sign is reserved for future extensions, for example to
expand some variables like %H to a hash value of the real host name ...
Idea by kaFux in #ngircd.
ngircd unfortunately uses several options using double-negation, e.g.
NoIdent = No, NoPam = No, etc.
This renames all options by dropping the "No" prefix, e.g.
"NoIdent = no" becomes "Ident = yes".
The old options will continue to work, but will cause a warning
message.
Also update man pages and default config.
To prevent silly
'Ident = yes' from appearing in --configtest output in the
'ident support not compiled in and Ident Option not used' case,
make default value depend on feature availability.
If feature is available, enable by default, otherwise disable.
We might consider moving these options to a new
[Feature]
section, or something like that, because none of these options are
essential.
Another possible improvement:
'Ident = yes' option in ngircd.conf causes a warning if ngircd was
built without ident support.
This does not happen with e.g. zeroconf....
- Add generated sample-ngircd.conf to new .gitignore file,
- refactor Makefile.am to generate sample-ngircd.conf on "make all",
to clean it up on "make clean", and to install it to the correct place.
- Make sure path names in sample-ngircd.conf are separated by "/".
If ngIRCd is compiled to register its services using ZeroConf (e.g. using
Howl, Avahi or on Mac OS X) this parameter can be used to disable service
registration at runtime.
The new option "SyslogFacility" deines the syslog "facility" to which
ngIRCd should send log messages.
Possible values are system dependant, but most probably "auth", "daemon",
"user" and "local1" through "local7" are possible values; see syslog(3).
Default is "local5" for historical reasons.
previously, the given MotdFile file was read whenever a client
requested it.
Change handling to read the MotdFile contents into memory once
during config file parsing.
Two side effects:
- changes to the MOTD file do not have any effect until ngircds
configuration is reloaded
- MOTD file does no longer have to reside in the chroot directory
(the MOTD contents will then not be re-read on reload in that case)
When the "NoPAM" configuration option is set and ngIRCd is compiled
with support for PAM, ngIRCd will not call any PAM functions: all
connection attemps without password will succeed instead and all
connection attemps with password will fail.
If ngIRCd is compiled without PAM support, this option is a dummy
option and nothing changes: the global server password will still be
in effect.
The WEBIRC command is used by some Web-to-IRC gateways to set the correct
user name and host name of users instead of their own.
Syntax: WEBIRC <password> <username> <hostname> <ip-address>
The <password> must be set using the new configuration variable "WebircPassword" in the [Global] section of ngircd.conf.
Please note that the <ip-address> is currently not used by ngIRCd (we don't store it in the CLIENT structure, only the resolved hostname).
Added new configuration option "AllowRemoteOper" to control whether
remote IRC operators are allowed to use administrative commands that
affect this server or not
This commit introduces the configuration variable, but actually no
function is using it. That's up for the next patches to come ...
This patch introduces the new configuration variable "KeyFile" for
[Channel] sections in ngircd.conf. Here a file can be configured for each
pre-defined channel which contains individual channel keys for different
users. This file is line-based and must have the following syntax:
<user>:<nick>:<key>
<user> and <nick> can contain the wildcard character "*".
Please not that these channel keys are only in effect, when the channel
has a regular key set using channel mode "k"!
- Fix formatting of some log messages, mostly punctuation.
- cb_Connect_to_Server(): don't use string concatenation, because it
is not supported by pre-ANSI C compilers ...
The new configuration option "NoIdent" in ngircd.conf can be used to
disable IDENT lookups even when the ngIRCd daemon is compiled with IDENT
lookups enabled.
The following bits and bytes were not included in distribution archives:
- contrib: ngindent, ngircd.sh
- contrib/Debian: ngircd.postinst
- contrib/MacOSX: preinstall.sh, postinstall.sh
- doc/src: Doxyfile, header.inc.html, footer.inc.html, ngircd-doc.css
- src/portab: splint.h
This patch lets ngIRCd count outgoing connections as well as incoming
connections (up to now only outgoing connections have been counted). This
change is required because the Conn_Close() function doesn't know whether
it closes an outgoing connection or not and therefore would decrement the
counter below zero when an outgoing connection existed -- which would
trigger an assert() call ...
Please note that this patch changes the (so far undocumented but now fixed)
behaviour of the "MaxConnections" configuration option to account the sum
of the in- and outbound connections!
this also obsoletes ListenIPv4 and ListenIPv6 options.
If Listen is unset, it is treated as Listen="::,0.0.0.0".
Note: ListenIPv4 and ListenIPv6 options are still recognized,
but ngircd will print a warning if they are used in the config file.
Also, some plattforms require that ai_socktype
is set in the getaddrinfo() hints structure.
- New configuration option "MaxNickLength" to specify the allowed maximum
length of user nick names. Note: must be unique in an IRC network!
- Enhanced the IRC+ protocol to support an enhanced "server handshake" and
enable server to recognice numeric 005 (ISUPPORT) and 376 (ENDOFMOTD).
See doc/Protocol.txt for details.
Sebastian Köhler