Fix some wording, use spellchecker ;-)

This commit is contained in:
Alexander Barton 2011-06-28 13:12:06 +02:00
parent 29c49f643f
commit bd118c65fd
6 changed files with 24 additions and 24 deletions

View File

@ -13,13 +13,13 @@ ngIRCd Release 18
ngIRCd 18~rc1 (2011-06-27)
- PAM warning message: make clear which "Password" config option is ignored.
- New configuration opion "MorePrivacy" to "censor" some user information.
When enabled, signon time and idle time is censored. Part and quit
- New configuration option "MorePrivacy" to "censor" some user information.
When enabled, signon time and idle time is left out. Part and quit
messages are made to look the same. WHOWAS requests are silently dropped.
All of this is useful if one wish to conceal users that access the ngircd
servers from TOR or I2P.
- New configuration option "ScrubCTCP" to scrub incoming CTCP commands. If
activated, the server silently drops incomming CTCP requests from both
activated, the server silently drops incoming CTCP requests from both
other servers and from users. The server that scrubs CTCP will not forward
the CTCP requests to other servers in the network either, which can spell
trouble if not every oper knows about the CTCP-scrubbing. Scrubbing CTCP
@ -43,7 +43,7 @@ ngIRCd Release 18
would be best to just use 4096 bits, but that takes minutes, even on
current hardware ...
- contrib/platformtest.sh: fix gcc version detection.
- Avoid needlesly scary 'buffer overflow' messages: When the write buffer
- Avoid needlessly scary 'buffer overflow' messages: When the write buffer
space grows too large, ngIRCd has to disconnect the client to avoid
wasting too much memory, which is logged with a scary 'write buffer
overflow' message. Change this to a more descriptive wording.
@ -59,8 +59,8 @@ ngIRCd Release 18
like e.g. snircd (QuakeNet) does.
- Generate WALLOPS message on SQUIT from IRC operators; so SQUIT now behaves
like CONNECT and DISCONNECT commands, when called by an IRC operator.
- Allow servers to send more commands in the first 10 secods ("burst"). This
helps to speed up server login and network synchronisation.
- Allow servers to send more commands in the first 10 seconds ("burst"). This
helps to speed up server login and network synchronization.
- Add support for up to 3 targets in WHOIS queries, also allow up to one
wildcard query from local hosts. Follows ircd 2.10 implementation rather
than RFC 2812. At most 10 entries are returned per wildcard expansion.
@ -83,7 +83,7 @@ ngIRCd Release 18
- Don't access possibly free'd CLIENT structure. Ooops.
- Allow "Port = 0" in [Server] blocks. Port number 0 marks remote servers
that try to connect to this daemon, but where this daemon never tries to
establis a connection on its own: only incoming connections are allowed.
establish a connection on its own: only incoming connections are allowed.
- Configuration: fix 'Value of "..." is not a number!' for negative values.
- Enable WHOIS command to return information about services.
- Implement channel mode 'O': "IRC operators only". This channel mode is
@ -100,9 +100,9 @@ ngIRCd Release 18
in [Global] are still accepted, so there is no functional change.
- Fix confusing "adding to invite list" debug messages: adding entries to
ban list produced 'invite list' debug output ...
- Don't throttle services and servers beeing registered.
- Don't throttle services and servers being registered.
- Xcode: correctly sort files :-)
- Don't assert() when serching a client for an invalid server token (this is
- Don't assert() when searching a client for an invalid server token (this is
only relevant when a trusted server on a server-server link sends invalid
commands).
@ -113,7 +113,7 @@ ngIRCd Release 17.1 (2010-12-19)
- Reset ID of outgoing server link on DNS error correctly
- Don't log critical (or worse) messages to stderr
- Manual page ngircd(8): add SIGNALS section
- Manual pages: update and simplyfy AUTHORS section
- Manual pages: update and simplify AUTHORS section
- Remove "error file" when compiled with debug code enabled
- README: Updated list of implemented commands
- add doc/README-Interix.txt and doc/Bopm.txt to distribution tarball

View File

@ -134,7 +134,7 @@ Again: "end users" do not need this step!
The configure-script is used to detect local system dependencies.
In the perfect case, configure should recognise all needed libraries, header
In the perfect case, configure should recognize all needed libraries, header
files and so on. If this shouldn't work, "./configure --help" shows all
possible options.

10
NEWS
View File

@ -11,13 +11,13 @@
ngIRCd Release 18
ngIRCd 18~rc1 (2011-06-27)
- New configuration opion "MorePrivacy" to "censor" some user information.
When enabled, signon time and idle time is censored. Part and quit
- New configuration option "MorePrivacy" to "censor" some user information.
When enabled, signon time and idle time is left out. Part and quit
messages are made to look the same. WHOWAS requests are silently dropped.
All of this is useful if one wish to conceal users that access the ngircd
servers from TOR or I2P.
- New configuration option "ScrubCTCP" to scrub incoming CTCP commands. If
activated, the server silently drops incomming CTCP requests from both
activated, the server silently drops incoming CTCP requests from both
other servers and from users. The server that scrubs CTCP will not forward
the CTCP requests to other servers in the network either, which can spell
trouble if not every oper knows about the CTCP-scrubbing. Scrubbing CTCP
@ -34,7 +34,7 @@ ngIRCd Release 18
the [Global] section are deprecated now, but are still recognized.
=> Don't forget to check your configuration, use "ngircd --configtest"!
- New documentation "how to contribute": doc/Contributing.txt.
- Avoid needlesly scary 'buffer overflow' messages: When the write buffer
- Avoid needlessly scary 'buffer overflow' messages: When the write buffer
space grows too large, ngIRCd has to disconnect the client to avoid
wasting too much memory, which is logged with a scary 'write buffer
overflow' message. Change this to a more descriptive wording.
@ -63,7 +63,7 @@ ngIRCd Release 18
the moment. This enhances reliability on slow links.
- Allow "Port = 0" in [Server] blocks. Port number 0 marks remote servers
that try to connect to this daemon, but where this daemon never tries to
establis a connection on its own: only incoming connections are allowed.
establish a connection on its own: only incoming connections are allowed.
- Enable WHOIS command to return information about services.
- Implement channel mode 'O': "IRC operators only". This channel mode is
used on DALnet (bahamut), for example.

View File

@ -57,7 +57,7 @@
# This tells ngIRCd to write its current process ID to a file.
# Note that the pidfile is written AFTER chroot and switching the
# user ID, e.g. the directory the pidfile resides in must be
# writeable by the ngIRCd user and exist in the chroot directory.
# writable by the ngIRCd user and exist in the chroot directory.
;PidFile = /var/run/ngircd/ngircd.pid
# Ports on which the server should listen. There may be more than
@ -110,7 +110,7 @@
[Options]
# Optional features and configuration options to further tweak the
# behavior of ngIRCd. If you wan't to get started quickly, you most
# behavior of ngIRCd. If you want to get started quickly, you most
# probably don't have to make changes here -- they are all optional.
# Are remote IRC operators allowed to control this server, e.g.
@ -170,7 +170,7 @@
# "PONG" reply.
;RequireAuthPing = no
# Silently drop all incomming CTCP requests.
# Silently drop all incoming CTCP requests.
;ScrubCTCP = no
# Syslog "facility" to which ngIRCd should send log messages.

View File

@ -26,7 +26,7 @@ there are good chances that it also supports other UNIX-based operating
systems as well. By default, ngIRCd writes diagnostic and informational messages using
the syslog mechanism.
.SH OPTIONS
The default behaviour of
The default behavior of
.BR ngircd
is to read its standard configuration file (see below), to detach from the
controlling terminal and to wait for clients.
@ -68,7 +68,7 @@ Default "message of the day" (MOTD).
The daemon understands the following signals:
.TP
\fBTERM\fR
Shut down all conections and terminate the daemon.
Shut down all connections and terminate the daemon.
.TP
\fBHUP\fR
Shut down all listening sockets, re-read the configuration file and

View File

@ -128,7 +128,7 @@ if ngIRCd is using PAM!
\fBPidFile\fR (string)
This tells ngIRCd to write its current process ID to a file. Note that the
pidfile is written AFTER chroot and switching the user ID, e.g. the directory
the pidfile resides in must be writeable by the ngIRCd user and exist in the
the pidfile resides in must be writable by the ngIRCd user and exist in the
chroot directory (if configured, see above).
.TP
\fBPorts\fR (list of numbers)
@ -192,7 +192,7 @@ If a client fails to answer a PING with a PONG within <PongTimeout>
seconds, it will be disconnected by the server. Default: 20.
.SH [OPTIONS]
Optional features and configuration options to further tweak the behavior of
ngIRCd. If you wan't to get started quickly, you most probably don't have to
ngIRCd. If you want to get started quickly, you most probably don't have to
make changes here -- they are all optional.
.TP
\fBAllowRemoteOper\fR (boolean)
@ -291,7 +291,7 @@ Default: no.
If set to true, ngIRCd will silently drop all CTCP requests sent to it from
both clients and servers. It will also not forward CTCP requests to any
other servers. CTCP requests can be used to query user clients about which
software they are using and which versions said softare is. CTCP can also be
software they are using and which versions said software is. CTCP can also be
used to reveal clients IP numbers. ACTION CTCP requests are not blocked,
this means that /me commands will not be dropped, but please note that
blocking CTCP will disable file sharing between users!