minimodem-mirror/src/minimodem.1.in

195 lines
6.4 KiB
Groff
Raw Normal View History

2011-06-23 01:10:31 +02:00
.\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH MINIMODEM 1 "August 19, 2012"
2011-06-23 01:10:31 +02:00
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
minimodem \- software audio Bell-type or RTTY FSK modem
.SH SYNOPSIS
.B minimodem --tx
.RI [ options ]
.I {baudmode}
.br
.B minimodem --rx
.RI [ options ]
.I {baudmode}
.SH DESCRIPTION
.B minimodem
2011-07-16 04:33:50 +02:00
is a command-line program which generates (or decodes) audio
modem tones at any specified baud rate, emulating an old Bell-type or
radio-teletype FSK modem. The tones can be played to (or recorded from)
the system audio (PulseAudio or ALSA) or to an audio file.
2011-06-23 01:10:31 +02:00
.PP
.B minimodem
can be used to transfer data between nearby computers using an audio
cable (or just via sound waves), or between remote computers using radio,
telephone, or another audio communications medium.
.SH "TX/RX MODE"
.TP
.B \-t, \-\-tx, \-\-transmit, \-\-write
transmit mode: generate audio tones
.TP
.B \-r, \-\-rx, \-\-receive, \-\-read
receive mode: decode audio tones
.SH OPTIONS
.TP
.B \-a, \-\-auto-carrier
automatically detect mark and space frequences from carrier
.TP
.B \-c, \-\-confidence min-confidence-threshold
Set receive confidence minimum threshold (default 1.5).
The "confidence" value is a metric based primarily on
the SNR (signal-to-noise ratio) of the received signal.
This value acts as an FSK decoder "squelch" control.
Increase to accept only very clean signals (up to INFINITY, but
a value around 5.0 is more practical). Decrease to accept partial
decoding of noisy signals (down to a minimum value of 1.0).
(This option applies to \-\-rx mode only).
.B \-l, \-\-limit max-confidence-search-limit
Set receive confidence maximum search limit (default 2.3).
The "confidence" value is as described above.
This value acts as a performance vs. analysis quality control.
Increase (up to INFINITY) for a more pedantic analysis
and higher CPU usage. Decrease (down to the min-confidence-threshold)
for a sloppier analysis, with lower CPU usage.
(This option applies to \-\-rx mode only).
2011-07-08 22:16:06 +02:00
.TP
2011-06-23 01:10:31 +02:00
.B \-8, \-\-ascii
ASCII 8\-N\-1
.TP
.B \-5, \-\-baudot
Baudot 5\-N\-1.5
.TP
.B \-f, \-\-file filename.wav
encode or decode an audio file (extension sets audio format)
2011-06-23 01:10:31 +02:00
.TP
.B \-b, \-\-bandwidth {rx_bandwidth}
.TP
2012-08-25 09:32:11 +02:00
.B \-v, \-\-volume {tx_amplitude or 'E'}
Sets the generated signal amplitude (default is 1.0). As a special case
useful for testing, the value 'E' sets the amplitude to the very small value
FLT_EPSILON. (This option applies to \-\-tx mode only).
.TP
2011-06-23 01:10:31 +02:00
.B \-M, \-\-mark {mark_freq}
.TP
.B \-S, \-\-space {space_freq}
.TP
2012-09-01 22:33:49 +02:00
.B \-\-startbits {n}
Sets the number of start bits (default is 1 for most baudmodes).
.TP
.B \-\-stopbits {n.n}
Sets the number of stop bits (default is 1.0 for most baudmodes).
2011-07-02 20:22:06 +02:00
.TP
2012-09-01 23:54:32 +02:00
.B \-\-sync-byte {0xXX}
If this option is used, initial carrier acquisition will be suppressed
until after one or more consecutive data frame(s) containing this value
are received. This can be used to synchronize the stream for protocols
which include a fixed preamble byte.
(This option applies to \-\-rx mode only).
.TP
2011-07-09 03:08:52 +02:00
.B \-q, \-\-quiet
Do not report CARRIER / NOCARRIER or signal analysis metrics.
.TP
.B \-R, \-\-samplerate {rate}
Set the audio sample rate (default rate is 48000 Hz).
.TP
.B \-A, \-\-alsa
Use ALSA as the audio output system instead of the default
PulseAudio (depending on build configuration options).
.TP
.B \-\-lut={tx_sin_table_len}
Minimodem uses a precomputed sine wave lookup table of 1024 elements,
or the size specified here. Use \-\-lut=0 to disable the use of
the sine wave lookup table. (This option applies to \-\-tx mode only).
.TP
.B \-\-float-samples
Generate 32-bit floating-point format audio samples, instead of the
default 16-bit signed integer format (applies to \-\-tx mode only;
\-\-rx mode always uses 32-bit floating-point).
.TP
.B \-\-rx-one
Quit after the first carrier/no-carrier event (applies to \-\-rx mode only).
.TP
.B \-\-benchmarks
Run and report internal performance tests (all other flags are ignored).
.TP
2011-07-02 20:22:06 +02:00
.B \-V, \-\-version
print program version
2011-06-23 01:10:31 +02:00
.SH {baudmode}
The required \fI{baudmode}\fR parameter may be any floating-point value to
specify a baud rate, or either of the strings "rtty" or "same".
2011-06-23 01:10:31 +02:00
The \fI{baudmode}\fR also implies certain other parameter defaults
2011-07-16 04:17:31 +02:00
depending on the rate, including standard (or at least reasonable)
default mark and space tone frequencies.
2011-06-23 01:10:31 +02:00
.TP
.B {any floating point value N}
: Bell-syle N bps \-\-ascii
.TP
2011-06-23 01:10:31 +02:00
.B 1200
: Bell202 1200 bps \-\-ascii
2011-06-23 01:10:31 +02:00
.TP
.B 300
: Bell103 300 bps \-\-ascii
2011-06-23 01:10:31 +02:00
.TP
.B rtty
: RTTY 45.45 bps \-\-baudot \-\-stopbits 1.5
2011-07-16 04:17:31 +02:00
.TP
.B same
: SAME 520.83 bps \-\-startbits 0 \-\-stopbits 0 \-\-sync-byte 0xAB
.br
NOAA Specific Area Message Encoding (SAME) protocol
2011-06-23 01:10:31 +02:00
.SH EXAMPLES
.TP
.B minimodem --tx 100
Transmit 100 baud tones from one computer ...
.TP
.B minimodem --rx 100
and receive 100 baud tones on another nearby computer.
.TP
.B minimodem --rx -a rtty
2011-06-23 01:10:31 +02:00
Decode amateur radio RTTY signals (listen near 14.085 MHz).
2011-07-16 04:17:31 +02:00
.TP
.B minimodem --rx same
Decode NOAA SAME protocol emergency alert transmissions, e.g.
.br
http://en.wikipedia.org/wiki/Specific_Area_Message_Encoding
.TP
2011-07-16 04:17:31 +02:00
.B minimodem --tx 0.5
Experiment with very low baud rates (works in noisy conditions).
.TP
.B minimodem --tx 12000
2012-08-09 04:58:05 +02:00
Experiment with very high baud rates (works with audio files).
2011-06-23 01:10:31 +02:00
.SH NOTES
2011-07-03 17:48:47 +02:00
.B minimodem
does not decode AX.25 framed packets.
2011-06-23 01:10:31 +02:00
.PP
.B minimodem
does not support modem control ("AT") commands, nor does it produce
DTMF telephone dialing tones.
2011-07-16 04:17:31 +02:00
.SH VERSION
This page documents
.B minimodem
version @PACKAGE_VERSION@.
The latest version is available at <http://www.whence.com/minimodem>.
2011-06-23 01:10:31 +02:00
.SH AUTHOR
.B minimodem
was written by Kamal Mostafa <kamal@whence.com>.
.SH COPYRIGHT
Copyright \(co 2011-2012 by Kamal Mostafa <kamal@whence.com>.
2011-06-23 01:10:31 +02:00
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
.br
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.