premiere-libtorrent/include/libtorrent/session_settings.hpp

/*

Copyright (c) 2003, Arvid Norberg
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:

    * Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in
      the documentation and/or other materials provided with the distribution.
    * Neither the name of the author nor the names of its
      contributors may be used to endorse or promote products derived
      from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

*/

#ifndef TORRENT_SESSION_SETTINGS_HPP_INCLUDED
#define TORRENT_SESSION_SETTINGS_HPP_INCLUDED

#include "libtorrent/version.hpp"
#include "libtorrent/config.hpp"

namespace libtorrent
{

	struct TORRENT_EXPORT proxy_settings
	{
		proxy_settings() : port(0), type(none) {}

		std::string hostname;
		int port;

		std::string username;
		std::string password;

		enum proxy_type
		{
			// a plain tcp socket is used, and
			// the other settings are ignored.
			none,
			// socks4 server, requires username.
			socks4,
			// the hostname and port settings are
			// used to connect to the proxy. No
			// username or password is sent.
			socks5,
			// the hostname and port are used to
			// connect to the proxy. the username
			// and password are used to authenticate
			// with the proxy server.
			socks5_pw,
			// the http proxy is only available for
			// tracker and web seed traffic
			// assumes anonymous access to proxy
			http,
			// http proxy with basic authentication
			// uses username and password
			http_pw
		};
		
		proxy_type type;
	
	};

	struct TORRENT_EXPORT session_settings
	{
		session_settings(std::string const& user_agent_ = "libtorrent/"
			LIBTORRENT_VERSION)
			: user_agent(user_agent_)
			, tracker_completion_timeout(60)
			, tracker_receive_timeout(20)
			, stop_tracker_timeout(10)
			, tracker_maximum_response_length(1024*1024)
			, piece_timeout(120)
			, request_queue_time(3.f)
			, max_allowed_in_request_queue(250)
			, max_out_request_queue(200)
			, whole_pieces_threshold(20)
			, peer_timeout(120)
			, urlseed_timeout(20)
			, urlseed_pipeline_size(5)
			, file_pool_size(40)
			, allow_multiple_connections_per_ip(false)
			, max_failcount(3)
			, min_reconnect_time(60)
			, peer_connect_timeout(10)
			, ignore_limits_on_local_network(true)
			, connection_speed(20)
			, send_redundant_have(false)
			, lazy_bitfields(true)
			, inactivity_timeout(600)
			, unchoke_interval(20)
#ifndef TORRENT_DISABLE_DHT
			, use_dht_as_fallback(true)
#endif
		{}

		// this is the user agent that will be sent to the tracker
		// when doing requests. It is used to identify the client.
		// It cannot contain \r or \n
		std::string user_agent;

		// the number of seconds to wait until giving up on a
		// tracker request if it hasn't finished
		int tracker_completion_timeout;
		
		// the number of seconds where no data is received
		// from the tracker until it should be considered
		// as timed out
		int tracker_receive_timeout;

		// the time to wait when sending a stopped message
		// before considering a tracker to have timed out.
		// this is usually shorter, to make the client quit
		// faster
		int stop_tracker_timeout;

		// if the content-length is greater than this value
		// the tracker connection will be aborted
		int tracker_maximum_response_length;

		// the number of seconds from a request is sent until
		// it times out if no piece response is returned.
		int piece_timeout;

		// the length of the request queue given in the number
		// of seconds it should take for the other end to send
		// all the pieces. i.e. the actual number of requests
		// depends on the download rate and this number.
		float request_queue_time;
		
		// the number of outstanding block requests a peer is
		// allowed to queue up in the client. If a peer sends
		// more requests than this (before the first one has
		// been sent) the last request will be dropped.
		// the higher this is, the faster upload speeds the
		// client can get to a single peer.
		int max_allowed_in_request_queue;
		
		// the maximum number of outstanding requests to
		// send to a peer. This limit takes precedence over
		// request_queue_time.
		int max_out_request_queue;

		// if a whole piece can be downloaded in this number
		// of seconds, or less, the peer_connection will prefer
		// to request whole pieces at a time from this peer.
		// The benefit of this is to better utilize disk caches by
		// doing localized accesses and also to make it easier
		// to identify bad peers if a piece fails the hash check.
		int whole_pieces_threshold;
		
		// the number of seconds to wait for any activity on
		// the peer wire before closing the connectiong due
		// to time out.
		int peer_timeout;
		
		// same as peer_timeout, but only applies to url-seeds.
		// this is usually set lower, because web servers are
		// expected to be more reliable.
		int urlseed_timeout;
		
		// controls the pipelining size of url-seeds
		int urlseed_pipeline_size;
		
		// sets the upper limit on the total number of files this
		// session will keep open. The reason why files are
		// left open at all is that some anti virus software
		// hooks on every file close, and scans the file for
		// viruses. deferring the closing of the files will
		// be the difference between a usable system and
		// a completely hogged down system. Most operating
		// systems also has a limit on the total number of
		// file descriptors a process may have open. It is
		// usually a good idea to find this limit and set the
		// number of connections and the number of files
		// limits so their sum is slightly below it.
		int file_pool_size;
		
		// false to not allow multiple connections from the same
		// IP address. true will allow it.
		bool allow_multiple_connections_per_ip;

		// the number of times we can fail to connect to a peer
		// before we stop retrying it.
		int max_failcount;
		
		// the number of seconds to wait to reconnect to a peer.
		// this time is multiplied with the failcount.
		int min_reconnect_time;

		// this is the timeout for a connection attempt. If
		// the connect does not succeed within this time, the
		// connection is dropped. The time is specified in seconds.
		int peer_connect_timeout;

		// if set to true, upload, download and unchoke limits
		// are ignored for peers on the local network.
		bool ignore_limits_on_local_network;

		// the number of connection attempts that
		// are made per second.
		int connection_speed;

		// if this is set to true, have messages will be sent
		// to peers that already have the piece. This is
		// typically not necessary, but it might be necessary
		// for collecting statistics in some cases. Default is false.
		bool send_redundant_have;

		// if this is true, outgoing bitfields will never be fuil. If the
		// client is seed, a few bits will be set to 0, and later filled
		// in with have messages. This is to prevent certain ISPs
		// from stopping people from seeding.
		bool lazy_bitfields;

		// if a peer is uninteresting and uninterested for longer
		// than this number of seconds, it will be disconnected.
		// default is 10 minutes
		int inactivity_timeout;

		// the number of seconds between chokes/unchokes
		int unchoke_interval;

		// if this is set, this IP will be reported do the
		// tracker in the ip= parameter.
		address announce_ip;

#ifndef TORRENT_DISABLE_DHT
		// while this is true, the dht will note be used unless the
		// tracker is online
		bool use_dht_as_fallback;
#endif
	};
	
#ifndef TORRENT_DISABLE_DHT
	struct dht_settings
	{
		dht_settings()
			: max_peers_reply(50)
			, search_branching(5)
			, service_port(0)
			, max_fail_count(20)
		{}
		
		// the maximum number of peers to send in a
		// reply to get_peers
		int max_peers_reply;

		// the number of simultanous "connections" when
		// searching the DHT.
		int search_branching;
		
		// the listen port for the dht. This is a UDP port.
		// zero means use the same as the tcp interface
		int service_port;
		
		// the maximum number of times a node can fail
		// in a row before it is removed from the table.
		int max_fail_count;
	};
#endif

#ifndef TORRENT_DISABLE_ENCRYPTION

	struct pe_settings
	{
		pe_settings()
			: out_enc_policy(enabled)
			, in_enc_policy(enabled)
			, allowed_enc_level(both)
			, prefer_rc4(false)
		{}

		enum enc_policy
		{
			forced,  // disallow non encrypted connections
			enabled, // allow encrypted and non encrypted connections
			disabled // disallow encrypted connections
		};

		enum enc_level
		{
			plaintext, // use only plaintext encryption
			rc4, // use only rc4 encryption 
			both // allow both
		};

		enc_policy out_enc_policy;
		enc_policy in_enc_policy;

		enc_level allowed_enc_level;
		// if the allowed encryption level is both, setting this to
		// true will prefer rc4 if both methods are offered, plaintext
		// otherwise
		bool prefer_rc4;
	};
#endif

}

#endif