/***************************************************************************/ /* */ /* ttgload.c */ /* */ /* TrueType Glyph Loader (body). */ /* */ /* Copyright 1996-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 by */ /* David Turner, Robert Wilhelm, and Werner Lemberg. */ /* */ /* This file is part of the FreeType project, and may only be used, */ /* modified, and distributed under the terms of the FreeType project */ /* license, LICENSE.TXT. By continuing to use, modify, or distribute */ /* this file you indicate that you have read the license and */ /* understand and accept it fully. */ /* */ /***************************************************************************/ #include #include FT_INTERNAL_DEBUG_H #include FT_INTERNAL_CALC_H #include FT_INTERNAL_STREAM_H #include FT_INTERNAL_SFNT_H #include FT_TRUETYPE_TAGS_H #include FT_OUTLINE_H #include "ttgload.h" #include "ttpload.h" #ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT #include "ttgxvar.h" #endif #include "tterrors.h" /*************************************************************************/ /* */ /* The macro FT_COMPONENT is used in trace mode. It is an implicit */ /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */ /* messages during execution. */ /* */ #undef FT_COMPONENT #define FT_COMPONENT trace_ttgload /*************************************************************************/ /* */ /* Composite font flags. */ /* */ #define ARGS_ARE_WORDS 0x0001 #define ARGS_ARE_XY_VALUES 0x0002 #define ROUND_XY_TO_GRID 0x0004 #define WE_HAVE_A_SCALE 0x0008 /* reserved 0x0010 */ #define MORE_COMPONENTS 0x0020 #define WE_HAVE_AN_XY_SCALE 0x0040 #define WE_HAVE_A_2X2 0x0080 #define WE_HAVE_INSTR 0x0100 #define USE_MY_METRICS 0x0200 #define OVERLAP_COMPOUND 0x0400 #define SCALED_COMPONENT_OFFSET 0x0800 #define UNSCALED_COMPONENT_OFFSET 0x1000 /*************************************************************************/ /* */ /* Returns the horizontal metrics in font units for a given glyph. If */ /* `check' is true, take care of monospaced fonts by returning the */ /* advance width maximum. */ /* */ static void Get_HMetrics( TT_Face face, FT_UInt idx, FT_Bool check, FT_Short* lsb, FT_UShort* aw ) { ( (SFNT_Service)face->sfnt )->get_metrics( face, 0, idx, lsb, aw ); if ( check && face->postscript.isFixedPitch ) *aw = face->horizontal.advance_Width_Max; } /*************************************************************************/ /* */ /* Returns the vertical metrics in font units for a given glyph. */ /* Greg Hitchcock from Microsoft told us that if there were no `vmtx' */ /* table, typoAscender/Descender from the `OS/2' table would be used */ /* instead, and if there were no `OS/2' table, use ascender/descender */ /* from the `hhea' table. But that is not what Microsoft's rasterizer */ /* apparently does: It uses the ppem value as the advance height, and */ /* sets the top side bearing to be zero. */ /* */ /* The monospace `check' is probably not meaningful here, but we leave */ /* it in for a consistent interface. */ /* */ static void Get_VMetrics( TT_Face face, FT_UInt idx, FT_Bool check, FT_Short* tsb, FT_UShort* ah ) { FT_UNUSED( check ); if ( face->vertical_info ) ( (SFNT_Service)face->sfnt )->get_metrics( face, 1, idx, tsb, ah ); #if 1 /* Empirically determined, at variance with what MS said */ else { *tsb = 0; *ah = face->root.units_per_EM; } #else /* This is what MS said to do. It isn't what they do, however. */ else if ( face->os2.version != 0xFFFFU ) { *tsb = face->os2.sTypoAscender; *ah = face->os2.sTypoAscender - face->os2.sTypoDescender; } else { *tsb = face->horizontal.Ascender; *ah = face->horizontal.Ascender - face->horizontal.Descender; } #endif } /*************************************************************************/ /* */ /* Translates an array of coordinates. */ /* */ static void translate_array( FT_UInt n, FT_Vector* coords, FT_Pos delta_x, FT_Pos delta_y ) { FT_UInt k; if ( delta_x ) for ( k = 0; k < n; k++ ) coords[k].x += delta_x; if ( delta_y ) for ( k = 0; k < n; k++ ) coords[k].y += delta_y; } #undef IS_HINTED #define IS_HINTED( flags ) ( ( flags & FT_LOAD_NO_HINTING ) == 0 ) /*************************************************************************/ /* */ /* The following functions are used by default with TrueType fonts. */ /* However, they can be replaced by alternatives if we need to support */ /* TrueType-compressed formats (like MicroType) in the future. */ /* */ /*************************************************************************/ FT_CALLBACK_DEF( FT_Error ) TT_Access_Glyph_Frame( TT_Loader loader, FT_UInt glyph_index, FT_ULong offset, FT_UInt byte_count ) { FT_Error error; FT_Stream stream = loader->stream; /* for non-debug mode */ FT_UNUSED( glyph_index ); FT_TRACE5(( "Glyph %ld\n", glyph_index )); /* the following line sets the `error' variable through macros! */ if ( FT_STREAM_SEEK( offset ) || FT_FRAME_ENTER( byte_count ) ) return error; loader->cursor = stream->cursor; loader->limit = stream->limit; return TT_Err_Ok; } FT_CALLBACK_DEF( void ) TT_Forget_Glyph_Frame( TT_Loader loader ) { FT_Stream stream = loader->stream; FT_FRAME_EXIT(); } FT_CALLBACK_DEF( FT_Error ) TT_Load_Glyph_Header( TT_Loader loader ) { FT_Byte* p = loader->cursor; FT_Byte* limit = loader->limit; if ( p + 10 > limit ) return TT_Err_Invalid_Outline; loader->n_contours = FT_NEXT_SHORT( p ); loader->bbox.xMin = FT_NEXT_SHORT( p ); loader->bbox.yMin = FT_NEXT_SHORT( p ); loader->bbox.xMax = FT_NEXT_SHORT( p ); loader->bbox.yMax = FT_NEXT_SHORT( p ); FT_TRACE5(( " # of contours: %d\n", loader->n_contours )); FT_TRACE5(( " xMin: %4d xMax: %4d\n", loader->bbox.xMin, loader->bbox.xMax )); FT_TRACE5(( " yMin: %4d yMax: %4d\n", loader->bbox.yMin, loader->bbox.yMax )); loader->cursor = p; return TT_Err_Ok; } FT_CALLBACK_DEF( FT_Error ) TT_Load_Simple_Glyph( TT_Loader load ) { FT_Error error; FT_Byte* p = load->cursor; FT_Byte* limit = load->limit; FT_GlyphLoader gloader = load->gloader; FT_Int n_contours = load->n_contours; FT_Outline* outline; TT_Face face = (TT_Face)load->face; FT_UShort n_ins; FT_Int n_points; FT_Byte *flag, *flag_limit; FT_Byte c, count; FT_Vector *vec, *vec_limit; FT_Pos x; FT_Short *cont, *cont_limit, prev_cont; FT_Int xy_size = 0; /* check that we can add the contours to the glyph */ error = FT_GLYPHLOADER_CHECK_POINTS( gloader, 0, n_contours ); if ( error ) goto Fail; /* reading the contours' endpoints & number of points */ cont = gloader->current.outline.contours; cont_limit = cont + n_contours; /* check space for contours array + instructions count */ if ( n_contours >= 0xFFF || p + ( n_contours + 1 ) * 2 > limit ) goto Invalid_Outline; prev_cont = FT_NEXT_USHORT( p ); if ( n_contours > 0 ) cont[0] = prev_cont; for ( cont++; cont < cont_limit; cont++ ) { cont[0] = FT_NEXT_USHORT( p ); if ( cont[0] <= prev_cont ) { /* unordered contours: this is invalid */ error = FT_Err_Invalid_Table; goto Fail; } prev_cont = cont[0]; } n_points = 0; if ( n_contours > 0 ) { n_points = cont[-1] + 1; if ( n_points < 0 ) goto Invalid_Outline; } /* note that we will add four phantom points later */ error = FT_GLYPHLOADER_CHECK_POINTS( gloader, n_points + 4, 0 ); if ( error ) goto Fail; /* we'd better check the contours table right now */ outline = &gloader->current.outline; for ( cont = outline->contours + 1; cont < cont_limit; cont++ ) if ( cont[-1] >= cont[0] ) goto Invalid_Outline; /* reading the bytecode instructions */ load->glyph->control_len = 0; load->glyph->control_data = 0; if ( p + 2 > limit ) goto Invalid_Outline; n_ins = FT_NEXT_USHORT( p ); FT_TRACE5(( " Instructions size: %u\n", n_ins )); if ( n_ins > face->max_profile.maxSizeOfInstructions ) { FT_TRACE0(( "TT_Load_Simple_Glyph: Too many instructions (%d)\n", n_ins )); error = TT_Err_Too_Many_Hints; goto Fail; } if ( ( limit - p ) < n_ins ) { FT_TRACE0(( "TT_Load_Simple_Glyph: Instruction count mismatch!\n" )); error = TT_Err_Too_Many_Hints; goto Fail; } #ifdef TT_USE_BYTECODE_INTERPRETER if ( IS_HINTED( load->load_flags ) ) { load->glyph->control_len = n_ins; load->glyph->control_data = load->exec->glyphIns; FT_MEM_COPY( load->exec->glyphIns, p, (FT_Long)n_ins ); } #endif /* TT_USE_BYTECODE_INTERPRETER */ p += n_ins; /* reading the point tags */ flag = (FT_Byte*)outline->tags; flag_limit = flag + n_points; FT_ASSERT( flag != NULL ); while ( flag < flag_limit ) { if ( p + 1 > limit ) goto Invalid_Outline; *flag++ = c = FT_NEXT_BYTE( p ); if ( c & 8 ) { if ( p + 1 > limit ) goto Invalid_Outline; count = FT_NEXT_BYTE( p ); if ( flag + (FT_Int)count > flag_limit ) goto Invalid_Outline; for ( ; count > 0; count-- ) *flag++ = c; } } /* reading the X coordinates */ vec = outline->points; vec_limit = vec + n_points; flag = (FT_Byte*)outline->tags; x = 0; if ( p + xy_size > limit ) goto Invalid_Outline; for ( ; vec < vec_limit; vec++, flag++ ) { FT_Pos y = 0; FT_Byte f = *flag; if ( f & 2 ) { if ( p + 1 > limit ) goto Invalid_Outline; y = (FT_Pos)FT_NEXT_BYTE( p ); if ( ( f & 16 ) == 0 ) y = -y; } else if ( ( f & 16 ) == 0 ) { if ( p + 2 > limit ) goto Invalid_Outline; y = (FT_Pos)FT_NEXT_SHORT( p ); } x += y; vec->x = x; *flag = f & ~( 2 | 16 ); } /* reading the Y coordinates */ vec = gloader->current.outline.points; vec_limit = vec + n_points; flag = (FT_Byte*)outline->tags; x = 0; for ( ; vec < vec_limit; vec++, flag++ ) { FT_Pos y = 0; FT_Byte f = *flag; if ( f & 4 ) { if ( p + 1 > limit ) goto Invalid_Outline; y = (FT_Pos)FT_NEXT_BYTE( p ); if ( ( f & 32 ) == 0 ) y = -y; } else if ( ( f & 32 ) == 0 ) { if ( p + 2 > limit ) goto Invalid_Outline; y = (FT_Pos)FT_NEXT_SHORT( p ); } x += y; vec->y = x; *flag = f & FT_CURVE_TAG_ON; } outline->n_points = (FT_UShort)n_points; outline->n_contours = (FT_Short) n_contours; load->cursor = p; Fail: return error; Invalid_Outline: error = TT_Err_Invalid_Outline; goto Fail; } FT_CALLBACK_DEF( FT_Error ) TT_Load_Composite_Glyph( TT_Loader loader ) { FT_Error error; FT_Byte* p = loader->cursor; FT_Byte* limit = loader->limit; FT_GlyphLoader gloader = loader->gloader; FT_SubGlyph subglyph; FT_UInt num_subglyphs; num_subglyphs = 0; do { FT_Fixed xx, xy, yy, yx; FT_UInt count; /* check that we can load a new subglyph */ error = FT_GlyphLoader_CheckSubGlyphs( gloader, num_subglyphs + 1 ); if ( error ) goto Fail; /* check space */ if ( p + 4 > limit ) goto Invalid_Composite; subglyph = gloader->current.subglyphs + num_subglyphs; subglyph->arg1 = subglyph->arg2 = 0; subglyph->flags = FT_NEXT_USHORT( p ); subglyph->index = FT_NEXT_USHORT( p ); /* check space */ count = 2; if ( subglyph->flags & ARGS_ARE_WORDS ) count += 2; if ( subglyph->flags & WE_HAVE_A_SCALE ) count += 2; else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE ) count += 4; else if ( subglyph->flags & WE_HAVE_A_2X2 ) count += 8; if ( p + count > limit ) goto Invalid_Composite; /* read arguments */ if ( subglyph->flags & ARGS_ARE_WORDS ) { subglyph->arg1 = FT_NEXT_SHORT( p ); subglyph->arg2 = FT_NEXT_SHORT( p ); } else { subglyph->arg1 = FT_NEXT_CHAR( p ); subglyph->arg2 = FT_NEXT_CHAR( p ); } /* read transform */ xx = yy = 0x10000L; xy = yx = 0; if ( subglyph->flags & WE_HAVE_A_SCALE ) { xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; yy = xx; } else if ( subglyph->flags & WE_HAVE_AN_XY_SCALE ) { xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; } else if ( subglyph->flags & WE_HAVE_A_2X2 ) { xx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; yx = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; xy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; yy = (FT_Fixed)FT_NEXT_SHORT( p ) << 2; } subglyph->transform.xx = xx; subglyph->transform.xy = xy; subglyph->transform.yx = yx; subglyph->transform.yy = yy; num_subglyphs++; } while ( subglyph->flags & MORE_COMPONENTS ); gloader->current.num_subglyphs = num_subglyphs; #ifdef TT_USE_BYTECODE_INTERPRETER { FT_Stream stream = loader->stream; /* we must undo the FT_FRAME_ENTER in order to point to the */ /* composite instructions, if we find some. */ /* we will process them later... */ /* */ loader->ins_pos = (FT_ULong)( FT_STREAM_POS() + p - limit ); } #endif loader->cursor = p; Fail: return error; Invalid_Composite: error = TT_Err_Invalid_Composite; goto Fail; } FT_LOCAL_DEF( void ) TT_Init_Glyph_Loading( TT_Face face ) { face->access_glyph_frame = TT_Access_Glyph_Frame; face->read_glyph_header = TT_Load_Glyph_Header; face->read_simple_glyph = TT_Load_Simple_Glyph; face->read_composite_glyph = TT_Load_Composite_Glyph; face->forget_glyph_frame = TT_Forget_Glyph_Frame; } static void tt_prepare_zone( TT_GlyphZone zone, FT_GlyphLoad load, FT_UInt start_point, FT_UInt start_contour ) { zone->n_points = (FT_UShort)( load->outline.n_points - start_point ); zone->n_contours = (FT_Short) ( load->outline.n_contours - start_contour ); zone->org = load->extra_points + start_point; zone->cur = load->outline.points + start_point; zone->orus = load->extra_points2 + start_point; zone->tags = (FT_Byte*)load->outline.tags + start_point; zone->contours = (FT_UShort*)load->outline.contours + start_contour; zone->first_point = (FT_UShort)start_point; } /*************************************************************************/ /* */ /* */ /* TT_Hint_Glyph */ /* */ /* */ /* Hint the glyph using the zone prepared by the caller. Note that */ /* the zone is supposed to include four phantom points. */ /* */ static FT_Error TT_Hint_Glyph( TT_Loader loader, FT_Bool is_composite ) { TT_GlyphZone zone = &loader->zone; FT_Pos origin; #ifdef TT_USE_BYTECODE_INTERPRETER FT_UInt n_ins; #else FT_UNUSED( is_composite ); #endif #ifdef TT_USE_BYTECODE_INTERPRETER n_ins = loader->glyph->control_len; #endif origin = zone->cur[zone->n_points - 4].x; origin = FT_PIX_ROUND( origin ) - origin; if ( origin ) translate_array( zone->n_points, zone->cur, origin, 0 ); #ifdef TT_USE_BYTECODE_INTERPRETER /* save original point position in org */ if ( n_ins > 0 ) FT_ARRAY_COPY( zone->org, zone->cur, zone->n_points ); #endif /* round pp2 and pp4 */ zone->cur[zone->n_points - 3].x = FT_PIX_ROUND( zone->cur[zone->n_points - 3].x ); zone->cur[zone->n_points - 1].y = FT_PIX_ROUND( zone->cur[zone->n_points - 1].y ); #ifdef TT_USE_BYTECODE_INTERPRETER if ( n_ins > 0 ) { FT_Bool debug; FT_Error error; error = TT_Set_CodeRange( loader->exec, tt_coderange_glyph, loader->exec->glyphIns, n_ins ); if ( error ) return error; loader->exec->is_composite = is_composite; loader->exec->pts = *zone; debug = FT_BOOL( !( loader->load_flags & FT_LOAD_NO_SCALE ) && ((TT_Size)loader->size)->debug ); error = TT_Run_Context( loader->exec, debug ); if ( error && loader->exec->pedantic_hinting ) return error; } #endif /* save glyph phantom points */ if ( !loader->preserve_pps ) { loader->pp1 = zone->cur[zone->n_points - 4]; loader->pp2 = zone->cur[zone->n_points - 3]; loader->pp3 = zone->cur[zone->n_points - 2]; loader->pp4 = zone->cur[zone->n_points - 1]; } return TT_Err_Ok; } /*************************************************************************/ /* */ /* */ /* TT_Process_Simple_Glyph */ /* */ /* */ /* Once a simple glyph has been loaded, it needs to be processed. */ /* Usually, this means scaling and hinting through bytecode */ /* interpretation. */ /* */ static FT_Error TT_Process_Simple_Glyph( TT_Loader loader ) { FT_GlyphLoader gloader = loader->gloader; FT_Error error = TT_Err_Ok; FT_Outline* outline; FT_Int n_points; outline = &gloader->current.outline; n_points = outline->n_points; /* set phantom points */ outline->points[n_points ] = loader->pp1; outline->points[n_points + 1] = loader->pp2; outline->points[n_points + 2] = loader->pp3; outline->points[n_points + 3] = loader->pp4; outline->tags[n_points ] = 0; outline->tags[n_points + 1] = 0; outline->tags[n_points + 2] = 0; outline->tags[n_points + 3] = 0; n_points += 4; #ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT if ( ((TT_Face)loader->face)->doblend ) { /* Deltas apply to the unscaled data. */ FT_Vector* deltas; FT_Memory memory = loader->face->memory; FT_Int i; error = TT_Vary_Get_Glyph_Deltas( (TT_Face)(loader->face), loader->glyph_index, &deltas, n_points ); if ( error ) return error; for ( i = 0; i < n_points; ++i ) { outline->points[i].x += deltas[i].x; outline->points[i].y += deltas[i].y; } FT_FREE( deltas ); } #endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */ if ( IS_HINTED( loader->load_flags ) ) { tt_prepare_zone( &loader->zone, &gloader->current, 0, 0 ); FT_ARRAY_COPY( loader->zone.orus, loader->zone.cur, loader->zone.n_points + 4 ); } /* scale the glyph */ if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 ) { FT_Vector* vec = outline->points; FT_Vector* limit = outline->points + n_points; FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale; FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale; for ( ; vec < limit; vec++ ) { vec->x = FT_MulFix( vec->x, x_scale ); vec->y = FT_MulFix( vec->y, y_scale ); } loader->pp1 = outline->points[n_points - 4]; loader->pp2 = outline->points[n_points - 3]; loader->pp3 = outline->points[n_points - 2]; loader->pp4 = outline->points[n_points - 1]; } if ( IS_HINTED( loader->load_flags ) ) { loader->zone.n_points += 4; error = TT_Hint_Glyph( loader, 0 ); } return error; } /*************************************************************************/ /* */ /* */ /* TT_Process_Composite_Component */ /* */ /* */ /* Once a composite component has been loaded, it needs to be */ /* processed. Usually, this means transforming and translating. */ /* */ static FT_Error TT_Process_Composite_Component( TT_Loader loader, FT_SubGlyph subglyph, FT_UInt start_point, FT_UInt num_base_points ) { FT_GlyphLoader gloader = loader->gloader; FT_Vector* base_vec = gloader->base.outline.points; FT_UInt num_points = gloader->base.outline.n_points; FT_Bool have_scale; FT_Pos x, y; have_scale = FT_BOOL( subglyph->flags & ( WE_HAVE_A_SCALE | WE_HAVE_AN_XY_SCALE | WE_HAVE_A_2X2 ) ); /* perform the transform required for this subglyph */ if ( have_scale ) { FT_UInt i; for ( i = num_base_points; i < num_points; i++ ) FT_Vector_Transform( base_vec + i, &subglyph->transform ); } /* get offset */ if ( !( subglyph->flags & ARGS_ARE_XY_VALUES ) ) { FT_UInt k = subglyph->arg1; FT_UInt l = subglyph->arg2; FT_Vector* p1; FT_Vector* p2; /* match l-th point of the newly loaded component to the k-th point */ /* of the previously loaded components. */ /* change to the point numbers used by our outline */ k += start_point; l += num_base_points; if ( k >= num_base_points || l >= num_points ) return TT_Err_Invalid_Composite; p1 = gloader->base.outline.points + k; p2 = gloader->base.outline.points + l; x = p1->x - p2->x; y = p1->y - p2->y; } else { x = subglyph->arg1; y = subglyph->arg2; if ( !x && !y ) return TT_Err_Ok; /* Use a default value dependent on */ /* TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED. This is useful for old TT */ /* fonts which don't set the xxx_COMPONENT_OFFSET bit. */ if ( have_scale && #ifdef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED !( subglyph->flags & UNSCALED_COMPONENT_OFFSET ) ) #else ( subglyph->flags & SCALED_COMPONENT_OFFSET ) ) #endif { #if 0 /*************************************************************************/ /* */ /* This algorithm is what Apple documents. But it doesn't work. */ /* */ int a = subglyph->transform.xx > 0 ? subglyph->transform.xx : -subglyph->transform.xx; int b = subglyph->transform.yx > 0 ? subglyph->transform.yx : -subglyph->transform.yx; int c = subglyph->transform.xy > 0 ? subglyph->transform.xy : -subglyph->transform.xy; int d = subglyph->transform.yy > 0 ? subglyph->transform.yy : -subglyph->transform.yy; int m = a > b ? a : b; int n = c > d ? c : d; if ( a - b <= 33 && a - b >= -33 ) m *= 2; if ( c - d <= 33 && c - d >= -33 ) n *= 2; x = FT_MulFix( x, m ); y = FT_MulFix( y, n ); #else /* 0 */ /*************************************************************************/ /* */ /* This algorithm is a guess and works much better than the above. */ /* */ FT_Fixed mac_xscale = FT_SqrtFixed( FT_MulFix( subglyph->transform.xx, subglyph->transform.xx ) + FT_MulFix( subglyph->transform.xy, subglyph->transform.xy ) ); FT_Fixed mac_yscale = FT_SqrtFixed( FT_MulFix( subglyph->transform.yy, subglyph->transform.yy ) + FT_MulFix( subglyph->transform.yx, subglyph->transform.yx ) ); x = FT_MulFix( x, mac_xscale ); y = FT_MulFix( y, mac_yscale ); #endif /* 0 */ } if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) ) { FT_Fixed x_scale = ((TT_Size)loader->size)->metrics.x_scale; FT_Fixed y_scale = ((TT_Size)loader->size)->metrics.y_scale; x = FT_MulFix( x, x_scale ); y = FT_MulFix( y, y_scale ); if ( subglyph->flags & ROUND_XY_TO_GRID ) { x = FT_PIX_ROUND( x ); y = FT_PIX_ROUND( y ); } } } if ( x || y ) translate_array( num_points - num_base_points, base_vec + num_base_points, x, y ); return TT_Err_Ok; } /*************************************************************************/ /* */ /* */ /* TT_Process_Composite_Glyph */ /* */ /* */ /* This is slightly different from TT_Process_Simple_Glyph, in that */ /* its sole purpose is to hint the glyph. Thus this function is */ /* only available when bytecode interpreter is enabled. */ /* */ static FT_Error TT_Process_Composite_Glyph( TT_Loader loader, FT_UInt start_point, FT_UInt start_contour ) { FT_Error error; FT_Outline* outline; FT_UInt i; outline = &loader->gloader->base.outline; /* make room for phantom points */ error = FT_GLYPHLOADER_CHECK_POINTS( loader->gloader, outline->n_points + 4, 0 ); if ( error ) return error; outline->points[outline->n_points ] = loader->pp1; outline->points[outline->n_points + 1] = loader->pp2; outline->points[outline->n_points + 2] = loader->pp3; outline->points[outline->n_points + 3] = loader->pp4; outline->tags[outline->n_points ] = 0; outline->tags[outline->n_points + 1] = 0; outline->tags[outline->n_points + 2] = 0; outline->tags[outline->n_points + 3] = 0; #ifdef TT_USE_BYTECODE_INTERPRETER { FT_Stream stream = loader->stream; FT_UShort n_ins; /* TT_Load_Composite_Glyph only gives us the offset of instructions */ /* so we read them here */ if ( FT_STREAM_SEEK( loader->ins_pos ) || FT_READ_USHORT( n_ins ) ) return error; FT_TRACE5(( " Instructions size = %d\n", n_ins )); /* check it */ if ( n_ins > ((TT_Face)loader->face)->max_profile.maxSizeOfInstructions ) { FT_TRACE0(( "TT_Process_Composite_Glyph: Too many instructions (%d)\n", n_ins )); return TT_Err_Too_Many_Hints; } else if ( n_ins == 0 ) return TT_Err_Ok; if ( FT_STREAM_READ( loader->exec->glyphIns, n_ins ) ) return error; loader->glyph->control_data = loader->exec->glyphIns; loader->glyph->control_len = n_ins; } #endif tt_prepare_zone( &loader->zone, &loader->gloader->base, start_point, start_contour ); /* Some points are likely touched during execution of */ /* instructions on components. So let's untouch them. */ for ( i = start_point; i < loader->zone.n_points; i++ ) loader->zone.tags[i] &= ~( FT_CURVE_TAG_TOUCH_X | FT_CURVE_TAG_TOUCH_Y ); loader->zone.n_points += 4; return TT_Hint_Glyph( loader, 1 ); } /* Calculate the four phantom points. */ /* The first two stand for horizontal origin and advance. */ /* The last two stand for vertical origin and advance. */ #define TT_LOADER_SET_PP( loader ) \ do { \ (loader)->pp1.x = (loader)->bbox.xMin - (loader)->left_bearing; \ (loader)->pp1.y = 0; \ (loader)->pp2.x = (loader)->pp1.x + (loader)->advance; \ (loader)->pp2.y = 0; \ (loader)->pp3.x = 0; \ (loader)->pp3.y = (loader)->top_bearing + (loader)->bbox.yMax; \ (loader)->pp4.x = 0; \ (loader)->pp4.y = (loader)->pp3.y - (loader)->vadvance; \ } while ( 0 ) /*************************************************************************/ /* */ /* */ /* load_truetype_glyph */ /* */ /* */ /* Loads a given truetype glyph. Handles composites and uses a */ /* TT_Loader object. */ /* */ static FT_Error load_truetype_glyph( TT_Loader loader, FT_UInt glyph_index, FT_UInt recurse_count ) { FT_Error error; FT_Fixed x_scale, y_scale; FT_ULong offset; TT_Face face = (TT_Face)loader->face; FT_GlyphLoader gloader = loader->gloader; FT_Bool opened_frame = 0; #ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT FT_Vector* deltas = NULL; #endif #ifdef FT_CONFIG_OPTION_INCREMENTAL FT_StreamRec inc_stream; FT_Data glyph_data; FT_Bool glyph_data_loaded = 0; #endif /* some fonts have an incorrect value of `maxComponentDepth', */ /* thus we allow depth 1 to catch the majority of them */ if ( recurse_count > 1 && recurse_count > face->max_profile.maxComponentDepth ) { error = TT_Err_Invalid_Composite; goto Exit; } /* check glyph index */ if ( glyph_index >= (FT_UInt)face->root.num_glyphs ) { error = TT_Err_Invalid_Glyph_Index; goto Exit; } loader->glyph_index = glyph_index; if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 ) { x_scale = ((TT_Size)loader->size)->metrics.x_scale; y_scale = ((TT_Size)loader->size)->metrics.y_scale; } else { x_scale = 0x10000L; y_scale = 0x10000L; } /* get metrics, horizontal and vertical */ { FT_Short left_bearing = 0, top_bearing = 0; FT_UShort advance_width = 0, advance_height = 0; Get_HMetrics( face, glyph_index, (FT_Bool)!( loader->load_flags & FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ), &left_bearing, &advance_width ); Get_VMetrics( face, glyph_index, (FT_Bool)!( loader->load_flags & FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ), &top_bearing, &advance_height ); #ifdef FT_CONFIG_OPTION_INCREMENTAL /* If this is an incrementally loaded font see if there are */ /* overriding metrics for this glyph. */ if ( face->root.internal->incremental_interface && face->root.internal->incremental_interface->funcs->get_glyph_metrics ) { FT_Incremental_MetricsRec metrics; metrics.bearing_x = left_bearing; metrics.bearing_y = 0; metrics.advance = advance_width; error = face->root.internal->incremental_interface->funcs->get_glyph_metrics( face->root.internal->incremental_interface->object, glyph_index, FALSE, &metrics ); if ( error ) goto Exit; left_bearing = (FT_Short)metrics.bearing_x; advance_width = (FT_UShort)metrics.advance; #if 0 /* GWW: Do I do the same for vertical metrics? */ metrics.bearing_x = 0; metrics.bearing_y = top_bearing; metrics.advance = advance_height; error = face->root.internal->incremental_interface->funcs->get_glyph_metrics( face->root.internal->incremental_interface->object, glyph_index, TRUE, &metrics ); if ( error ) goto Exit; top_bearing = (FT_Short)metrics.bearing_y; advance_height = (FT_UShort)metrics.advance; #endif /* 0 */ } #endif /* FT_CONFIG_OPTION_INCREMENTAL */ loader->left_bearing = left_bearing; loader->advance = advance_width; loader->top_bearing = top_bearing; loader->vadvance = advance_height; if ( !loader->linear_def ) { loader->linear_def = 1; loader->linear = advance_width; } } /* Set `offset' to the start of the glyph relative to the start of */ /* the `glyf' table, and `byte_len' to the length of the glyph in */ /* bytes. */ #ifdef FT_CONFIG_OPTION_INCREMENTAL /* If we are loading glyph data via the incremental interface, set */ /* the loader stream to a memory stream reading the data returned */ /* by the interface. */ if ( face->root.internal->incremental_interface ) { error = face->root.internal->incremental_interface->funcs->get_glyph_data( face->root.internal->incremental_interface->object, glyph_index, &glyph_data ); if ( error ) goto Exit; glyph_data_loaded = 1; offset = 0; loader->byte_len = glyph_data.length; FT_MEM_ZERO( &inc_stream, sizeof ( inc_stream ) ); FT_Stream_OpenMemory( &inc_stream, glyph_data.pointer, glyph_data.length ); loader->stream = &inc_stream; } else #endif /* FT_CONFIG_OPTION_INCREMENTAL */ offset = tt_face_get_location( face, glyph_index, (FT_UInt*)&loader->byte_len ); if ( loader->byte_len > 0 ) { error = face->access_glyph_frame( loader, glyph_index, loader->glyf_offset + offset, loader->byte_len ); if ( error ) goto Exit; opened_frame = 1; /* read first glyph header */ error = face->read_glyph_header( loader ); if ( error ) goto Exit; } if ( loader->byte_len == 0 || loader->n_contours == 0 ) { loader->bbox.xMin = 0; loader->bbox.xMax = 0; loader->bbox.yMin = 0; loader->bbox.yMax = 0; TT_LOADER_SET_PP( loader ); #ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT if ( ((TT_Face)(loader->face))->doblend ) { /* this must be done before scaling */ FT_Memory memory = loader->face->memory; error = TT_Vary_Get_Glyph_Deltas( (TT_Face)(loader->face), glyph_index, &deltas, 4 ); if ( error ) goto Exit; loader->pp1.x += deltas[0].x; loader->pp1.y += deltas[0].y; loader->pp2.x += deltas[1].x; loader->pp2.y += deltas[1].y; loader->pp3.x += deltas[2].x; loader->pp3.y += deltas[2].y; loader->pp4.x += deltas[3].x; loader->pp4.y += deltas[3].y; FT_FREE( deltas ); } #endif if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 ) { loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale ); loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale ); loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale ); loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale ); } error = TT_Err_Ok; goto Exit; } TT_LOADER_SET_PP( loader ); /***********************************************************************/ /***********************************************************************/ /***********************************************************************/ /* if it is a simple glyph, load it */ if ( loader->n_contours > 0 ) { error = face->read_simple_glyph( loader ); if ( error ) goto Exit; /* all data have been read */ face->forget_glyph_frame( loader ); opened_frame = 0; error = TT_Process_Simple_Glyph( loader ); if ( error ) goto Exit; FT_GlyphLoader_Add( gloader ); } /***********************************************************************/ /***********************************************************************/ /***********************************************************************/ /* otherwise, load a composite! */ else if ( loader->n_contours == -1 ) { FT_UInt start_point; FT_UInt start_contour; FT_ULong ins_pos; /* position of composite instructions, if any */ start_point = gloader->base.outline.n_points; start_contour = gloader->base.outline.n_contours; /* for each subglyph, read composite header */ error = face->read_composite_glyph( loader ); if ( error ) goto Exit; /* store the offset of instructions */ ins_pos = loader->ins_pos; /* all data we need are read */ face->forget_glyph_frame( loader ); opened_frame = 0; #ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT if ( face->doblend ) { FT_Int i, limit; FT_SubGlyph subglyph; FT_Memory memory = face->root.memory; /* this provides additional offsets */ /* for each component's translation */ if ( ( error = TT_Vary_Get_Glyph_Deltas( face, glyph_index, &deltas, gloader->current.num_subglyphs + 4 )) != 0 ) goto Exit; subglyph = gloader->current.subglyphs + gloader->base.num_subglyphs; limit = gloader->current.num_subglyphs; for ( i = 0; i < limit; ++i, ++subglyph ) { if ( subglyph->flags & ARGS_ARE_XY_VALUES ) { subglyph->arg1 += deltas[i].x; subglyph->arg2 += deltas[i].y; } } loader->pp1.x += deltas[i + 0].x; loader->pp1.y += deltas[i + 0].y; loader->pp2.x += deltas[i + 1].x; loader->pp2.y += deltas[i + 1].y; loader->pp3.x += deltas[i + 2].x; loader->pp3.y += deltas[i + 2].y; loader->pp4.x += deltas[i + 3].x; loader->pp4.y += deltas[i + 3].y; FT_FREE( deltas ); } #endif /* TT_CONFIG_OPTION_GX_VAR_SUPPORT */ if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 ) { loader->pp1.x = FT_MulFix( loader->pp1.x, x_scale ); loader->pp2.x = FT_MulFix( loader->pp2.x, x_scale ); loader->pp3.y = FT_MulFix( loader->pp3.y, y_scale ); loader->pp4.y = FT_MulFix( loader->pp4.y, y_scale ); } /* if the flag FT_LOAD_NO_RECURSE is set, we return the subglyph */ /* `as is' in the glyph slot (the client application will be */ /* responsible for interpreting these data)... */ if ( loader->load_flags & FT_LOAD_NO_RECURSE ) { FT_GlyphLoader_Add( gloader ); loader->glyph->format = FT_GLYPH_FORMAT_COMPOSITE; goto Exit; } /*********************************************************************/ /*********************************************************************/ /*********************************************************************/ { FT_UInt n, num_base_points; FT_SubGlyph subglyph = 0; FT_UInt num_points = start_point; FT_UInt num_subglyphs = gloader->current.num_subglyphs; FT_UInt num_base_subgs = gloader->base.num_subglyphs; FT_Stream old_stream = loader->stream; #ifdef TT_USE_BYTECODE_INTERPRETER TT_GraphicsState saved_GS; if ( loader->exec ) saved_GS = loader->exec->GS; #endif FT_GlyphLoader_Add( gloader ); /* read each subglyph independently */ for ( n = 0; n < num_subglyphs; n++ ) { FT_Vector pp[4]; #ifdef TT_USE_BYTECODE_INTERPRETER /* reinitialize graphics state */ if ( loader->exec ) loader->exec->GS = saved_GS; #endif /* Each time we call load_truetype_glyph in this loop, the */ /* value of `gloader.base.subglyphs' can change due to table */ /* reallocations. We thus need to recompute the subglyph */ /* pointer on each iteration. */ subglyph = gloader->base.subglyphs + num_base_subgs + n; pp[0] = loader->pp1; pp[1] = loader->pp2; pp[2] = loader->pp3; pp[3] = loader->pp4; num_base_points = gloader->base.outline.n_points; error = load_truetype_glyph( loader, subglyph->index, recurse_count + 1 ); if ( error ) goto Exit; /* restore subglyph pointer */ subglyph = gloader->base.subglyphs + num_base_subgs + n; if ( !( subglyph->flags & USE_MY_METRICS ) ) { loader->pp1 = pp[0]; loader->pp2 = pp[1]; loader->pp3 = pp[2]; loader->pp4 = pp[3]; } num_points = gloader->base.outline.n_points; if ( num_points == num_base_points ) continue; /* gloader->base.outline consists of three parts: */ /* 0 -(1)-> start_point -(2)-> num_base_points -(3)-> n_points. */ /* */ /* (1): exists from the beginning */ /* (2): components that have been loaded so far */ /* (3): the newly loaded component */ TT_Process_Composite_Component( loader, subglyph, start_point, num_base_points ); } loader->stream = old_stream; /* process the glyph */ loader->ins_pos = ins_pos; if ( IS_HINTED( loader->load_flags ) && #ifdef TT_USE_BYTECODE_INTERPRETER subglyph->flags & WE_HAVE_INSTR && #endif num_points > start_point ) TT_Process_Composite_Glyph( loader, start_point, start_contour ); } } else { /* invalid composite count (negative but not -1) */ error = TT_Err_Invalid_Outline; goto Exit; } /***********************************************************************/ /***********************************************************************/ /***********************************************************************/ Exit: if ( opened_frame ) face->forget_glyph_frame( loader ); #ifdef FT_CONFIG_OPTION_INCREMENTAL if ( glyph_data_loaded ) face->root.internal->incremental_interface->funcs->free_glyph_data( face->root.internal->incremental_interface->object, &glyph_data ); #endif return error; } static FT_Error compute_glyph_metrics( TT_Loader loader, FT_UInt glyph_index ) { FT_BBox bbox; TT_Face face = (TT_Face)loader->face; FT_Fixed y_scale; TT_GlyphSlot glyph = loader->glyph; TT_Size size = (TT_Size)loader->size; y_scale = 0x10000L; if ( ( loader->load_flags & FT_LOAD_NO_SCALE ) == 0 ) y_scale = size->root.metrics.y_scale; if ( glyph->format != FT_GLYPH_FORMAT_COMPOSITE ) FT_Outline_Get_CBox( &glyph->outline, &bbox ); else bbox = loader->bbox; /* get the device-independent horizontal advance; it is scaled later */ /* by the base layer. */ { FT_Pos advance = loader->linear; /* the flag FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH was introduced to */ /* correctly support DynaLab fonts, which have an incorrect */ /* `advance_Width_Max' field! It is used, to my knowledge, */ /* exclusively in the X-TrueType font server. */ /* */ if ( face->postscript.isFixedPitch && ( loader->load_flags & FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ) == 0 ) advance = face->horizontal.advance_Width_Max; /* we need to return the advance in font units in linearHoriAdvance, */ /* it will be scaled later by the base layer. */ glyph->linearHoriAdvance = advance; } glyph->metrics.horiBearingX = bbox.xMin; glyph->metrics.horiBearingY = bbox.yMax; glyph->metrics.horiAdvance = loader->pp2.x - loader->pp1.x; /* Now take care of vertical metrics. In the case where there is */ /* no vertical information within the font (relatively common), make */ /* up some metrics by `hand'... */ { FT_Pos top; /* scaled vertical top side bearing */ FT_Pos advance; /* scaled vertical advance height */ /* Get the unscaled top bearing and advance height. */ if ( face->vertical_info && face->vertical.number_Of_VMetrics > 0 ) { top = (FT_Short)FT_DivFix( loader->pp3.y - bbox.yMax, y_scale ); if ( loader->pp3.y <= loader->pp4.y ) advance = 0; else advance = (FT_UShort)FT_DivFix( loader->pp3.y - loader->pp4.y, y_scale ); } else { FT_Pos height; /* XXX Compute top side bearing and advance height in */ /* Get_VMetrics instead of here. */ /* NOTE: The OS/2 values are the only `portable' ones, */ /* which is why we use them, if there is an OS/2 */ /* table in the font. Otherwise, we use the */ /* values defined in the horizontal header. */ height = (FT_Short)FT_DivFix( bbox.yMax - bbox.yMin, y_scale ); if ( face->os2.version != 0xFFFFU ) advance = (FT_Pos)( face->os2.sTypoAscender - face->os2.sTypoDescender ); else advance = (FT_Pos)( face->horizontal.Ascender - face->horizontal.Descender ); top = ( advance - height ) / 2; } #ifdef FT_CONFIG_OPTION_INCREMENTAL { FT_Incremental_InterfaceRec* incr; FT_Incremental_MetricsRec metrics; FT_Error error; incr = face->root.internal->incremental_interface; /* If this is an incrementally loaded font see if there are */ /* overriding metrics for this glyph. */ if ( incr && incr->funcs->get_glyph_metrics ) { metrics.bearing_x = 0; metrics.bearing_y = top; metrics.advance = advance; error = incr->funcs->get_glyph_metrics( incr->object, glyph_index, TRUE, &metrics ); if ( error ) return error; top = metrics.bearing_y; advance = metrics.advance; } } /* GWW: Do vertical metrics get loaded incrementally too? */ #endif /* FT_CONFIG_OPTION_INCREMENTAL */ glyph->linearVertAdvance = advance; /* scale the metrics */ if ( !( loader->load_flags & FT_LOAD_NO_SCALE ) ) { top = FT_MulFix( top, y_scale ); advance = FT_MulFix( advance, y_scale ); } /* XXX: for now, we have no better algorithm for the lsb, but it */ /* should work fine. */ /* */ glyph->metrics.vertBearingX = ( bbox.xMin - bbox.xMax ) / 2; glyph->metrics.vertBearingY = top; glyph->metrics.vertAdvance = advance; } /* adjust advance width to the value contained in the hdmx table */ if ( !face->postscript.isFixedPitch && IS_HINTED( loader->load_flags ) ) { FT_Byte* widthp; widthp = tt_face_get_device_metrics( face, size->root.metrics.x_ppem, glyph_index ); if ( widthp ) glyph->metrics.horiAdvance = *widthp << 6; } /* set glyph dimensions */ glyph->metrics.width = bbox.xMax - bbox.xMin; glyph->metrics.height = bbox.yMax - bbox.yMin; return 0; } #ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS static FT_Error load_sbit_image( TT_Size size, TT_GlyphSlot glyph, FT_UInt glyph_index, FT_Int32 load_flags ) { TT_Face face; SFNT_Service sfnt; FT_Stream stream; FT_Error error; TT_SBit_MetricsRec metrics; face = (TT_Face)glyph->face; sfnt = (SFNT_Service)face->sfnt; stream = face->root.stream; error = sfnt->load_sbit_image( face, size->strike_index, glyph_index, (FT_Int)load_flags, stream, &glyph->bitmap, &metrics ); if ( !error ) { glyph->outline.n_points = 0; glyph->outline.n_contours = 0; glyph->metrics.width = (FT_Pos)metrics.width << 6; glyph->metrics.height = (FT_Pos)metrics.height << 6; glyph->metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6; glyph->metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6; glyph->metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6; glyph->metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6; glyph->metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6; glyph->metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6; glyph->format = FT_GLYPH_FORMAT_BITMAP; if ( load_flags & FT_LOAD_VERTICAL_LAYOUT ) { glyph->bitmap_left = metrics.vertBearingX; glyph->bitmap_top = metrics.vertBearingY; } else { glyph->bitmap_left = metrics.horiBearingX; glyph->bitmap_top = metrics.horiBearingY; } } return error; } #endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */ static FT_Error tt_loader_init( TT_Loader loader, TT_Size size, TT_GlyphSlot glyph, FT_Int32 load_flags ) { TT_Face face; FT_Stream stream; face = (TT_Face)glyph->face; stream = face->root.stream; FT_MEM_ZERO( loader, sizeof ( TT_LoaderRec ) ); #ifdef TT_USE_BYTECODE_INTERPRETER /* load execution context */ if ( IS_HINTED( load_flags ) ) { TT_ExecContext exec; FT_Bool grayscale; if ( !size->cvt_ready ) { FT_Error error = tt_size_ready_bytecode( size ); if ( error ) return error; } /* query new execution context */ exec = size->debug ? size->context : ( (TT_Driver)FT_FACE_DRIVER( face ) )->context; if ( !exec ) return TT_Err_Could_Not_Find_Context; grayscale = FT_BOOL( FT_LOAD_TARGET_MODE( load_flags ) != FT_RENDER_MODE_MONO ); TT_Load_Context( exec, face, size ); /* a change from mono to grayscale rendering (and vice versa) */ /* requires a re-execution of the CVT program */ if ( grayscale != exec->grayscale ) { FT_UInt i; exec->grayscale = grayscale; for ( i = 0; i < size->cvt_size; i++ ) size->cvt[i] = FT_MulFix( face->cvt[i], size->ttmetrics.scale ); tt_size_run_prep( size ); } /* see whether the cvt program has disabled hinting */ if ( exec->GS.instruct_control & 1 ) load_flags |= FT_LOAD_NO_HINTING; /* load default graphics state -- if needed */ if ( exec->GS.instruct_control & 2 ) exec->GS = tt_default_graphics_state; exec->pedantic_hinting = FT_BOOL( load_flags & FT_LOAD_PEDANTIC ); loader->exec = exec; loader->instructions = exec->glyphIns; } #endif /* TT_USE_BYTECODE_INTERPRETER */ /* seek to the beginning of the glyph table -- for Type 42 fonts */ /* the table might be accessed from a Postscript stream or something */ /* else... */ #ifdef FT_CONFIG_OPTION_INCREMENTAL if ( face->root.internal->incremental_interface ) loader->glyf_offset = 0; else #endif { FT_Error error = face->goto_table( face, TTAG_glyf, stream, 0 ); if ( error ) { FT_ERROR(( "TT_Load_Glyph: could not access glyph table\n" )); return error; } loader->glyf_offset = FT_STREAM_POS(); } /* get face's glyph loader */ { FT_GlyphLoader gloader = glyph->internal->loader; FT_GlyphLoader_Rewind( gloader ); loader->gloader = gloader; } loader->load_flags = load_flags; loader->face = (FT_Face)face; loader->size = (FT_Size)size; loader->glyph = (FT_GlyphSlot)glyph; loader->stream = stream; return TT_Err_Ok; } /*************************************************************************/ /* */ /* */ /* TT_Load_Glyph */ /* */ /* */ /* A function used to load a single glyph within a given glyph slot, */ /* for a given size. */ /* */ /* */ /* glyph :: A handle to a target slot object where the glyph */ /* will be loaded. */ /* */ /* size :: A handle to the source face size at which the glyph */ /* must be scaled/loaded. */ /* */ /* glyph_index :: The index of the glyph in the font file. */ /* */ /* load_flags :: A flag indicating what to load for this glyph. The */ /* FT_LOAD_XXX constants can be used to control the */ /* glyph loading process (e.g., whether the outline */ /* should be scaled, whether to load bitmaps or not, */ /* whether to hint the outline, etc). */ /* */ /* */ /* FreeType error code. 0 means success. */ /* */ FT_LOCAL_DEF( FT_Error ) TT_Load_Glyph( TT_Size size, TT_GlyphSlot glyph, FT_UInt glyph_index, FT_Int32 load_flags ) { TT_Face face; FT_Error error; TT_LoaderRec loader; face = (TT_Face)glyph->face; error = TT_Err_Ok; #ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS /* try to load embedded bitmap if any */ /* */ /* XXX: The convention should be emphasized in */ /* the documents because it can be confusing. */ if ( size->strike_index != 0xFFFFFFFFUL && ( load_flags & FT_LOAD_NO_BITMAP ) == 0 ) { error = load_sbit_image( size, glyph, glyph_index, load_flags ); if ( !error ) return TT_Err_Ok; } #endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */ /* if FT_LOAD_NO_SCALE is not set, `ttmetrics' must be valid */ if ( !( load_flags & FT_LOAD_NO_SCALE ) && !size->ttmetrics.valid ) return TT_Err_Invalid_Size_Handle; if ( load_flags & FT_LOAD_SBITS_ONLY ) return TT_Err_Invalid_Argument; error = tt_loader_init( &loader, size, glyph, load_flags ); if ( error ) return error; glyph->format = FT_GLYPH_FORMAT_OUTLINE; glyph->num_subglyphs = 0; glyph->outline.flags = 0; /* main loading loop */ error = load_truetype_glyph( &loader, glyph_index, 0 ); if ( !error ) { if ( glyph->format == FT_GLYPH_FORMAT_COMPOSITE ) { glyph->num_subglyphs = loader.gloader->base.num_subglyphs; glyph->subglyphs = loader.gloader->base.subglyphs; } else { glyph->outline = loader.gloader->base.outline; glyph->outline.flags &= ~FT_OUTLINE_SINGLE_PASS; /* In case bit 1 of the `flags' field in the `head' table isn't */ /* set, translate array so that (0,0) is the glyph's origin. */ if ( ( face->header.Flags & 2 ) == 0 && loader.pp1.x ) FT_Outline_Translate( &glyph->outline, -loader.pp1.x, 0 ); } compute_glyph_metrics( &loader, glyph_index ); } /* Set the `high precision' bit flag. */ /* This is _critical_ to get correct output for monochrome */ /* TrueType glyphs at all sizes using the bytecode interpreter. */ /* */ if ( !( load_flags & FT_LOAD_NO_SCALE ) && size->root.metrics.y_ppem < 24 ) glyph->outline.flags |= FT_OUTLINE_HIGH_PRECISION; return error; } /* END */