This line was lost in commit 89ca1fd6 (from 2013-06-25). The effect
is to use a previous darkening amount when producing an unhinted,
unscaled outline. This can cause autohint samples in ftgrid and
ftview to be based on darkened CFF outlines instead of unhinted,
undarkened ones.
The bug was caused by switching to the initial hintmap (the one in
effect when `moveto' executes) just before drawing the final element
in the charstring. This ensured that the path was closed (in both
Character Space and Device Space). But if the final element was a
curve and if the final hintmap was different enough from the initial
one, then the curve was visibly distorted.
The first part of the fix is to draw the final curve using the final
hintmap as specified by the charstring. This corrects the
distortion but does not ensure closing in Device Space. It may
require the rasterizer to automatically generate an extra closing
line. Depending on the hintmap differences, this line could be from
zero to a couple pixels in length.
The second part of the fix covers the case where the charstring
subpath is closed with an explicit line. We now modify that line's
end point to avoid the distortion.
Some glyphs in the bug report font (TexGyreHeros-Regular) that show
the change are:
25ppem S (98)
24ppem eight (52)
25.5ppem p (85)
Curves at the *end* of a subpath are no longer distorted. However,
some of these glyphs have bad hint substitutions in the middle of a
subpath, and these are not affected.
The patch has been tested with a set of 106 fonts that shipped with
Adobe Creative Suite 4, together with 756 Open Source CFF fonts from
Google Fonts. There are 1.5 million glyphs, of which some 20k are
changed with the fix. A sampling of a few hundred of these changes
have been examined more closely, and the changes look good (or at
least acceptable).
* src/cff/cf2hints.h (CF2_GlyphPathRec): New element `pathIsClosing'
to indicate that we synthesize a closepath line.
* src/cff/cf2hints.c (cf2_glyphpath_init): Updated.
(cf2_glyphpath_pushPrevElem): If closing, use first hint map (for
`lineto' operator) and adjust hint zone.
For synthesized closing lines, use end point in first hint zone.
(cf2_glyphpath_lineTo): Take care of synthesized closing lines. In
particular, shift the detection of zero-length lines from character
space to device space.
(cf2_glyphpath_closeOpenPath): Remove assertion.
Updated.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
* src/cff/cffload.c (cff_index_get_pointers): Check for `cur_offset
!= 0'; this stronger test is mandated by the CFF specification.
Fix test for INDEX structures which have one or more empty entries
at the end.
The call was (from the top-level of the FreeType tree):
cppcheck --force \
--enable=all \
-I /usr/include \
-I /usr/local/include \
-I /usr/lib/gcc/i586-suse-linux/4.7/include \
-I include \
-I include/freetype \
-I include/freetype/config \
-I include/freetype/internal \
-DFT2_BUILD_LIBRARY \
. &> cppcheck.log
using cppcheck git commit f7e93f99.
Note that cppcheck still can't handle `#include FOO' (with `FOO' a
macro).
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/gxvalid/*: Comment out redundant code or guard it with
FT_DEBUG_LEVEL_TRACE.
This is for `FT_Get_Advance'.
There are 7 places where the spec says the width can be defined:
hstem/hstemhm
vstem/vstemhm
cntrmask/hintmask
hmoveto
vmoveto
rmoveto
endchar
* src/cff/cf2intrp.c (cf2_doStems): Exit early for width-only calls,
if possible.
(cf2_interpT2CharString) <cf2_cmdHSTEM>, <cf2_cmdVSTEM>,
<cf2_cmdVMOVETO>, <cf2_cmdENDCHAR>, <cf2_cmdHINTMASK>,
<cf2_cmdRMOVETO>, <cf2_cmdHMOVETO>: Exit early for width-only calls.
* src/base/ftobjs.c: Fix typo in MS pragma.
* src/base/bdflib.c (_bdf_set_default_spacing, _bdf_add_property):
`lineno' is only used in debug mode.
* src/cff/cf2ft.c (cf2_builder_moveTo): `params' is only used in
debug mode.
http://cppcheck.sourceforge.net/
Note that the current version heavily chokes on FreeType, delivering
even wrong results. I will report those issues to the cppcheck team
so that a newer version gives improved results hopefully.
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/base/ftmac.c ,builds/mac/ftmac.c (count_faces_scalable):
Remove unused variable.
* src/base/ftdbgmem.c (ft_mem_table_destroy): `table' can't be zero.
* src/gxvalid/gxvkern.c (gxv_kern_subtable_fmt1_entry_validate):
Remove functionless code.
* src/tools/ftrandom.c (main): Fix memory leak.
This controls whether the old FreeType CFF engine gets compiled into
FreeType. It is now disabled by default.
* devel/ftoption.h, include/freetype/config/ftoption.h
(CFF_CONFIG_OPTION_OLD_ENGINE): New macro.
* src/cff/cffdrivr.c (cff_property_set), src/cff/cffgload.c
(CFF_Operator, cff_argument_counts, cff_builder_add_point,
cff_operator_seac, cff_decoder_parse_charstrings, cff_slot_load),
src/cff/cffgload.h, src/cff/cffobjs.c (cff_driver_init): Use
CFF_CONFIG_OPTION_OLD_ENGINE to guard the affected code.
* docs/CHANGES: Updated.
Reported by numerous people on the `freetype-devel' list. Without
this fix, glyphs aren't properly aligned on a common baseline.
On 64bit systems, `FT_Pos' expands to `long int', having a width of
64bit. `CF2_Fixed' expands to `int' which is normally 32bit wide on
64bit hosts also. Wrong casts filled up the blues arrays with
incorrect values. Note that all blues values are accessed with the
`cf2_blueToFixed' macro which handles the 64bit to 32bit conversion.
* src/cff/cf2ft.h (cf2_getBlueValues, cf2_getOtherBlues,
cf2_getFamilyBlues, cf2_getFamilyOtherBlues): Use `FT_Pos' for
`data', not `CF2_Fixed'.
* src/cff/cf2ft.c (cf2_getBlueValues, cf2_getOtherBlues,
cf2_getFamilyBlues, cf2_getFamilyOtherBlues): Updated.
* src/cff/cf2blues.c (cf2_blues_init): Updated.
* src/base/ftcalc.c (FT_DivFix): Use unsigned values for
computations which use the left shift operator and convert to signed
as the last step.
* src/base/fttrigon.c (ft_trig_prenorm, FT_Vector_Rotate,
FT_Vector_Length, FT_Vector_Polarize): Ditto.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Simplify.
* src/cff/cffload.c (cff_subfont_load): Fix constant.
* src/cff/cffparse.c (cff_parse_integer, cff_parse_real, do_fixed,
cff_parse_fixed_dynamic): Use unsigned values for computations which
use the left shift operator and convert to signed as the last step.
* src/cid/cidload.c (cid_get_offset): Ditto.
* src/psaux/psconv.c (PS_Conv_ToFixed): Ditto.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Ditto.
* src/truetype/ttinterp.c (TT_MulFix14, TT_DotFix14): Ditto.
* include/freetype/internal/ftstream.h: Simplify and fix integer
extraction macros.
(FT_INT8_, FT_BYTE_I16, FT_BYTE_I32, FT_INT8_I16, FT_INT8_I32,
FT_INT8_I32, FT_INT8_U32): Removed.
(FT_PEEK_SHORT, FT_PEEK_LONG, FT_PEEK_OFF3, FT_PEEK_SHORT_LE,
FT_PEEK_LONG_LE, FT_PEEK_OFF3_LE): Use unsigned values for
computations and convert to signed as the last step.
* src/cff/cf2fixed.h (cf2_intToFixed, cf2_fixedToInt,
cf2_fracToFixed): Avoid shifts of negative values.
(cf2_intToFrac, cf2_fixedToFrac, cf2_fixedTo26Dot6): Removed,
unused.
* src/cff/cf2intrp.c (cf2_interpT2CharString) <cf2_cmdEXTENDEDNMBR,
default>: Use unsigned values for computations and convert to signed
as the last step.
Use proper types in tracing messages.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Use unsigned
values for computation of operands and convert to signed as the last
step.
Use proper type in tracing message.
This work, written by Dave Arnold <darnold@adobe.com> and fully
integrated into FreeType by me, is a donation by Adobe in
collaboration with Google. It is vastly superior to the old CFF
engine, and it will replace it soon. Right now, it is still off by
default, and you have to explicitly select it using the new
`hinting-engine' property of the cff driver.
For convenience, (most of) the new files are committed separately.
* include/freetype/config/ftheader.h (FT_CFF_DRIVER_H): New macro.
* include/freetype/ftcffdrv.h: New file to access CFF driver
properties.
* include/freetype/fterrdef.h (FT_Err_Glyph_Too_Big): New error
code.
* include/freetype/internal/fttrace.h: Add `cf2blues', `cf2hints',
and `cf2interp'.
* src/cff/cffgload.h (CFF_SubFont): New member `current_subfont'.
* src/cff/cffobjs.h (CFF_DriverRec): New members `hinting_engine'
and `no_stem_darkening'.
* src/cff/cfftypes.h (CFF_FontRec): New member `cf2_instance'.
* src/cff/cff.c: Include new files.
* src/cff/cffdrivr.c (cff_property_set, cff_property_get): Handle
`hinting-engine' and `no-stem-darkening' properties (only the Adobe
engine listens to them).
* src/cff/cffgload.c: Include `cf2ft.h'.
(cff_decoder_prepare): Initialize `current_subfont'.
(cff_build_add_point): Handle Adobe engine which uses 16.16
coordinates.
(cff_slot_load): Handle FT_LOAD_NO_SCALE and FT_LOAD_NO_HINTING
separately.
Choose rendering engine based on `hinting_engine' property.
* src/cff/cffload.c (cff_font_done): Call finalizer of the Adobe
engine.
* src/cff/cffobjs.c: Include FT_CFF_DRIVER_H.
(cff_driver_init): Set default property values.
* src/cff/rules.mk (CFF_DRV_SRC, CFF_DRV_H): Add new files.
* src/cff/cf2*.*: New files, containing the Adobe engine.
* src/cff/cffgload.c (check_points): Rename to...
(cff_check_points): ...this and make it FT_LOCAL.
(cff_builder_add_point, cff_builder_add_point1,
cff_builder_start_point, cff_builder_close_contour,
cff_lookup_glyph_by_stdcharcode, cff_get_glyph_data,
cff_free_glyph_data): Make them FT_LOCAL.
* src/cff/cffgload.h: Updated.
* include/freetype/internal/ftserv.h (FT_DEFINE_SERVICEDESCREC7):
New macro.
* src/cff/cffdrivr.c: Include FT_SERVICE_PROPERTIES_H.
(cff_property_set, cff_property_get): New function, still empty.
Define `cff_service_properties' service.
Update `cff_services'.
* src/cff/cffpic.h: Include FT_SERVICE_PROPERTIES_H.
(CFF_SERVICE_PROPERTIES_GET): New macro.
CffModulePIC: Add `cff_service_properties'.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
* src/cff/cffload.c (cff_font_load): Separate subfont and face
index handling to load both pure CFFs with multiple subfonts and
OTCs (with multiple faces where each face holds exactly one
subfont).
* src/cff/cffobjs.c (cff_face_init): Updated.
* src/cff/cffparse.c (cff_parse_integer): Emit tracing message in
case of error.
(cff_parse_real): Handle and trace overflow, underflow, and bad data
consistently.
(do_fixed): New helper function, handling and tracing overflow.
(cff_parse_fixed, cff_parse_fixed_scaled): Use `do_fixed'.
Werner Lemberg