This line was lost in commit 89ca1fd6 (from 2013-06-25). The effect
is to use a previous darkening amount when producing an unhinted,
unscaled outline. This can cause autohint samples in ftgrid and
ftview to be based on darkened CFF outlines instead of unhinted,
undarkened ones.
The bug was caused by switching to the initial hintmap (the one in
effect when `moveto' executes) just before drawing the final element
in the charstring. This ensured that the path was closed (in both
Character Space and Device Space). But if the final element was a
curve and if the final hintmap was different enough from the initial
one, then the curve was visibly distorted.
The first part of the fix is to draw the final curve using the final
hintmap as specified by the charstring. This corrects the
distortion but does not ensure closing in Device Space. It may
require the rasterizer to automatically generate an extra closing
line. Depending on the hintmap differences, this line could be from
zero to a couple pixels in length.
The second part of the fix covers the case where the charstring
subpath is closed with an explicit line. We now modify that line's
end point to avoid the distortion.
Some glyphs in the bug report font (TexGyreHeros-Regular) that show
the change are:
25ppem S (98)
24ppem eight (52)
25.5ppem p (85)
Curves at the *end* of a subpath are no longer distorted. However,
some of these glyphs have bad hint substitutions in the middle of a
subpath, and these are not affected.
The patch has been tested with a set of 106 fonts that shipped with
Adobe Creative Suite 4, together with 756 Open Source CFF fonts from
Google Fonts. There are 1.5 million glyphs, of which some 20k are
changed with the fix. A sampling of a few hundred of these changes
have been examined more closely, and the changes look good (or at
least acceptable).
* src/cff/cf2hints.h (CF2_GlyphPathRec): New element `pathIsClosing'
to indicate that we synthesize a closepath line.
* src/cff/cf2hints.c (cf2_glyphpath_init): Updated.
(cf2_glyphpath_pushPrevElem): If closing, use first hint map (for
`lineto' operator) and adjust hint zone.
For synthesized closing lines, use end point in first hint zone.
(cf2_glyphpath_lineTo): Take care of synthesized closing lines. In
particular, shift the detection of zero-length lines from character
space to device space.
(cf2_glyphpath_closeOpenPath): Remove assertion.
Updated.
Suggested by Akira Tagoh, see
http://lists.gnu.org/archive/html/freetype/2013-09/msg00030.html
* src/bdf/bdfdrivr.c (BDF_Face_Init): Return Invalid_Argument error
when the font could be opened but non-zero face_index is given.
* src/pcf/pcfdrivr.c (PCF_Face_Init): Ditto.
* src/type42/t42objs.c (T42_Face_Init): Remove unrequired FT_UNUSED
macro for face_index because it is validated in later.
This change introduces a new blue zone property
`AF_BLUE_PROPERTY_LATIN_LONG' to make the auto-hinter ignore short
top segments.
* src/autofit/afblue.dat: Fix Hebrew blue strings.
Use AF_BLUE_PROPERTY_LATIN_LONG for AF_BLUE_STRING_HEBREW_TOP.
* src/autofit/afblue.hin (AF_BLUE_PROPERTY_LATIN_LONG): New macro.
* src/autofit/afblue.c, src/autofit/afblue.h: Updated.
* src/autofit/aflatin.c (af_latin_metrics_init_blues): Handle
`AF_LATIN_IS_LONG_BLUE'.
* src/autofit/aflatin.h (AF_LATIN_IS_LONG_BLUE): New macro.
We simply synthesize a SFNT from the WOFF, create a memory stream
for the new data, and load the SFNT as usual.
Does NOT add any API to access WOFF metadata or private blocks.
* include/freetype/internal/tttypes.h (WOFF_HeaderRec,
WOFF_TableRec): New structures.
* include/freetype/tttags.h (TTAG_wOFF): New macro.
* src/base/ftobjs.c (FT_Open_Face): Set `stream' after calling
`open_face'.
* src/sfnt/sfobjs.c [FT_CONFIG_OPTION_SYSTEM_ZLIB]: Include
`FT_GZIP_H'.
(WRITE_BYTE, WRITE_USHORT, WRITE_ULONG): New temporary macros for
writing to a stream.
(sfnt_stream_close, compare_offsets, woff_open_font): New functions.
(sfnt_open_font): Handle `TTAG_wOFF'.
(sfnt_init_face): Set `stream' after calling `sfnt_open_font'.
* src/truetype/ttobjs.c (tt_face_init): Set `stream' after calling
`sfnt->init_face'.
* src/base/ftobjs.c (open_face): Use a pointer to FT_Stream as an
argument so that a changed stream survives.
Update callers.
This is modeled after zlib's `uncompress' function. We need this
for WOFF support.
* include/freetype/ftgzip.h, src/gzip/ftgzip.c (FT_Gzip_Uncompress):
New function.
* src/gzip/rules.mk: Rewrite to better reflect dependencies.
* src/autofit/afblue.cin, src/autofit/afblue.c: Don't include
`afblue.h' but `aftypes.h'.
* src/autofit/afcjk.c: Don't include `aftypes.h' but `afglobal.h'.
If the font's `clazz->init_face' function wants to swap to new
stream, handling of whether original stream was external could
result to either memory leak or double free. Mark externality into
face flags before calling `init_face' such that the clazz can handle
external streams properly.
* src/base/ftobjs.c (FT_Open_Face): Move code to set
FT_FACE_FLAG_EXTERNAL_STREAM to...
(open_face): This function.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
* src/autofit/afglobal.c (af_face_globals_get_metrics): Use
`AF_SCRIPT_DFLT', not value 0.
Simplify code.
* src/autofit/afscript.h: Sort by script name.
* src/autofit/afcjk.c (AF_CJK_MAX_TEST_CHARACTERS): Removed.
(af_cjk_hani_blue_chars): Removed.
(AF_CJK_BLUE_TYPE_*): Removed.
(af_cjk_metrics_init_blues): Replace AF_CJK_MAX_TEST_CHARACTERS with
AF_BLUE_STRING_MAX_LEN.
Change loops to use offsets (in file `afblue.h') into the new arrays
`af_blue_stringsets' and `af_blue_strings' (in file `afblue.c').
Instead of three dimensions (as used in the old blue string array)
we now use properties to do the same, saving one loop nesting level.
* src/autofit/afcjk.h: Remove old enumeration values superseded by
the new data in `afblue.h'.
(AF_CJK_IS_TOP_BLUE, AF_CJK_IS_HORIZ_BLUE, AF_CJK_IS_FILLED_BLUE,
AF_CJK_IS_RIGHT_BLUE): New macros, to be used in
`af_cjk_metrics_init_blues'.
(AF_CJK_BLUE_IS_RIGHT): Remove this now redundant enum value.
(AF_CJK_BLUE_IS_TOP): Renamed to...
(AF_CJK_BLUE_TOP): This.
(AF_CJK_MAX_BLUES): Remove.
(AF_CJKAxisRec): Updated.
* src/autofit/aflatin.c (AF_LATIN_MAX_TEST_CHARACTERS): Removed.
(af_latin_blue_chars): Removed.
(af_latin_metrics_init_blues): Replace AF_LATIN_MAX_TEST_CHARACTERS
with AF_BLUE_STRING_MAX_LEN.
Change loops to use offsets (in file `afblue.h') into the new arrays
`af_blue_stringsets' and `af_blue_strings' (in file `afblue.c').
Use `AF_LATIN_IS_SMALL_TOP_BLUE' macro.
* src/autofit/aflatin.h: Remove old enumeration values superseded by
the new data in `afblue.h'.
(AF_LATIN_IS_TOP_BLUE): Updated definition.
(AF_LATIN_IS_SMALL_TOP_BLUE): New macro.
(AF_LATIN_MAX_BLUES): Remove.
(AF_LatinAxisRec): Updated.
The idea is to have a central file which gets processed by a Perl
script to create proper `.c' and `.h' files using templates. There
are two other reasons to do that:
. The data file should be easily readable. We use UTF-8 encoding
which then gets converted to single bytes.
. Since the number of supported scripts will increase soon, the
current usage of blue string arrays is a waste of space. Using
the Perl script it is possible to imitate jagged arrays,
defining enumeration constants as offsets into the arrays.
This commit only adds files without changing any functionality.
* src/autofit/afblue.dat: New data file.
* src/tools/afblue.pl: New Perl script for processing `afblue.dat'.
* src/autofit/afblue.cin, src/autofit/afblue.hin: New template files
for...
* src/autofit/afblue.c, src/autofit/afblue.c: New source files.
To avoid a dependency on Perl, we add them too.
* src/base/ftbbox.c (BBox_Conic_Check): Remove redundant checks for
extremum at the segment ends, which are already within the bbox.
Slightly modify calculations.
* src/cff/cffload.c (cff_index_get_pointers): Check for `cur_offset
!= 0'; this stronger test is mandated by the CFF specification.
Fix test for INDEX structures which have one or more empty entries
at the end.
* src/truetype/ttinterp.c (TT_MulFix14_long_long,
TT_DotFix14_long_long): `#pragma gcc diagnostic {push,pop}' has been
introduced with gcc version 4.6.
* builds/unix/ftconfig.h: Synchronize with
`include/freetype/config/ftconfig.h'.
* builds/vms/ftconfig.h: Ditto.
Make the differences to the master `ftconfig.h' file as small as
possible for easier maintainance.
Points which are very near to each other are now marked as such.
The `weak' flag is then computed by using the `in' vector of the
first and the `out' vector of the last point of a group of near
points.
For example, this fixes the rendering of glyph `Oslash' in
`Roboto-Thin.ttf'.
* src/autofit/afhints.h (AF_Flags): New value `AF_FLAGS_NEAR'.
* src/autofit/afhints.c (af_glyph_hints_reload): Introduce
the heuristic value `near_limit' to decide whether the current point
is near to the previous one, then set `AF_FLAG_NEAR' accordingly.
Store good `in' vector (of last non-near point) in
`last_good_in_{x,y}' and use it as an argument to
`ft_corner_is_flat' if necessary.
This has the benefit that we don't need to duplicate the data at
different places.
* src/autofit/afscript.h: New file.
* src/autofit/aftypes.h (AF_Script): Include `afscript.h' to define
the enumeration values.
* src/autofit/afglobal.c: Include `afscript.h' to get the script
specific header files.
(af_script_classes): Include `afscript.h' to fill this array.
* src/autofit/afpic.c: Include `afscript.h' to get the script
specific header files.
(autofit_module_class_pic_init): Include `afscript.h' for
initialization.
* src/autofit/afpic.h (AF_SCRIPT_CLASSES_COUNT,
AF_SCRIPT_CLASSES_REC_COUNT): Removed. Use `AF_SCRIPT_MAX' instead.
* src/autofit/rules.mk (AUTOF_DRV_H): Updated.
This has the benefit that we don't need to duplicate the data at
different places.
* src/autofit/afwrtsys.h: New file.
* src/autofit/aftypes.h (AF_WritingSystem): Include `afwrtsys.h' to
define the enumeration values.
* src/autofit/afglobal.c: Include `afwrtsys.h' to get the writing
system specific header files.
Include `afpic.h'.
(af_writing_system_classes): Include `afwrtsys.h' to fill this
array.
* src/autofit/afpic.c: Include `afwrtsys.h' to get the writing
system specific header files.
(autofit_module_class_pic_init): Include `afwrtsys.h' for
initialization.
* src/autofit/afpic.h (AF_WRITING_SYSTEM_CLASSES_COUNT,
AF_WRITING_SYSTEM_CLASSES_REC_COUNT): Removed. Use
`AF_WRITING_SYSTEM_MAX' instead.
The call was (from the top-level of the FreeType tree):
cppcheck --force \
--enable=all \
-I /usr/include \
-I /usr/local/include \
-I /usr/lib/gcc/i586-suse-linux/4.7/include \
-I include \
-I include/freetype \
-I include/freetype/config \
-I include/freetype/internal \
-DFT2_BUILD_LIBRARY \
. &> cppcheck.log
using cppcheck git commit f7e93f99.
Note that cppcheck still can't handle `#include FOO' (with `FOO' a
macro).
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/gxvalid/*: Comment out redundant code or guard it with
FT_DEBUG_LEVEL_TRACE.
This patch adds a new top level to the auto-hinter's script class
hierarchy. It defines `writing systems' which can contain multiple
scripts.
For example, the `latin' writing system (in file `aflatin.c') is
able to support scripts like Latin, Cyrillic, Armenian, etc., which
can be handled similarly.
Scripts are now named using four-letter OpenType tags.
* src/autofit/aftypes.h (AF_ScriptClassRec): Move relevant members
to...
(AF_WritingSystemClassRec): This new structure. It holds pointers
to functions which can be shared among related scripts.
(AF_WritingSystem): New enumeration.
(AF_Script): Revised values using four-letter tags.
(AF_DEFINE_WRITING_SYSTEM_CLASS): New macro.
(AF_DEFINE_SCRIPT_CLASS): Updated.
* src/autofit/afglobal.c (af_writing_system_classes): New global,
constant array.
(af_script_classes): Updated.
(af_face_globals_free): Updated.
Remove assertion.
(af_face_globals_get_metrics): Updated.
* src/autofit/afglobal.h (AF_SCRIPT_FALLBACK)
[!AF_CONFIG_OPTION_CJK]: Handle this case.
* src/autofit/afloader.c (af_loader_load_g, af_loader_load_glyph):
Updated.
* src/autofit/afpic.c (autofit_module_class_pic_init): Updated;
initialize structures for both writing systems and scripts.
* src/autofit/afpic.h: Updated.
(AF_WRITING_SYSTEM_CLASSES_GET): New macro.
* src/autofit/afcjk.c (af_cjk_writing_system_class): New writing
system.
(af_cjk_uniranges): Renamed to...
(af_hani_uniranges): This.
(af_cjk_script_class): Reduced and renamed to...
(af_hani_script_class): This.
* src/autofit/afcjk.h: Updated.
* src/autofit/afdummy.c (af_dummy_writing_system_class): New writing
system.
(af_dummy_script_class): Reduced and renamed to...
(af_dflt_script_class): This.
* src/autofit/afdummy.h: Updated.
* src/autofit/afindic.c (af_indic_writing_system_class): New writing
system.
(af_indic_uniranges): Renamed to...
(af_deva_uniranges): This.
(af_indic_script_class): Reduced and renamed to...
(af_deva_script_class): This.
* src/autofit/afcjk.h: Updated.
* src/autofit/aflatin.c (af_latin_writing_system_class): New writing
system.
(af_latin_uniranges): Renamed to...
(af_latn_uniranges): This.
(af_latin_script_class): Reduced and renamed to...
(af_latn_script_class): This.
* src/autofit/aflatin.h: Updated.
* src/autofit/aflatin2.c (af_latin2_writing_system_class): New
writing system.
(af_latin2_uniranges): Renamed to...
(af_ltn2_uniranges): This.
Synchronize ranges with `latin'.
(af_latin2_script_class): Reduced and renamed to...
(af_ltn2_script_class): This.
* src/autofit/aflatin2.h: Updated.
Prevent division by zero by a transparent color.
* src/base/ftbitmap.c (ft_gray_for_premultiplied_srgb_bgra):
Return 0 immediately, when alpha channel is zero.
The old code (essentially unchanged since the very beginning)
incorrectly handled this configuration
x -o- x
/ \
/ \
/ \
o o
as flat and this
o o
/ /
x| x|
| |
o---------------o
as round. (`o' and `x' are on and off points, respectively).
This is a major change which should improve the rendering results
enormously for many TrueType fonts, especially in the range approx.
20-40ppem, fixing the appearance of many overshoots.
* src/autofit/aflatin.c (af_latin_metrics_init_blues): Look at the
first and last points of the segment, not the points right before
and after.
* src/sfnt/sfobjs.c (sfnt_load_face): Apple's `sbix' color bitmaps
are rendered scaled and then the `glyf' outline rendered on top. We
don't support that yet, so just ignore the `glyf' outline and
advertise it as a bitmap-only font.
* src/sfnt/ttsbit.c (tt_face_load_strike_metrics)
[TT_SBIT_TABLE_TYPE_SBIX]: Return metrics in 26.6 units.
(tt_face_load_sbix_image): Typo.
Other font engines seem to ignore it also. Problem reported by
Hin-Tak Leung <htl10@users.sourceforge.net>.
* src/sfnt/ttload.c (check_table_dir): Don't abort but warn only if
we have an invalid magic number.
Provide a work-around for an ARM-specific performance bug in GCC.
This speeds up the rasterizer by more than 5%.
Also slightly optimize `set_gray_cell' and `gray_record_cell' (which
also improves performance on other platforms by a tiny bit (<1%).
* src/smooth/ftgrays.c (FT_DIV_MOD): New macro.
Use it where appropriate.
(gray_record_cell, gray_set_cell, gray_move_to,
gray_convert_glyph_inner): Streamline condition handling.
This patch provides slightly optimized versions for ARM, x86, and
x86_64 CPUs if built with GCC.
Also remove some dead code.
* src/truetype/ttinterp.c (TT_MulFix14_arm, TT_MulFix14_long_long,
TT_DotFix14_long_long): New functions.
When building for ARMv7 with thumb2 instructions, the optimized
`FT_MulFix_arm' assembly routine was not being used.
The reason for this is in the `ftconfig.h' header, namely:
- The assembly routine uses the `smull' instruction which is not
available when generating Thumb-1 machine code. It is available
in Thumb-2 mode, though.
- The header was written a long time ago before Thumb-2 became
widely popular (e.g. with Android). So it simply doesn't use the
assembly routine if the `__thumb__' built-in macro is defined.
- When compiling in Thumb-2 mode, the compiler will define both
`__thumb__' and `__thumb2__'.
By checking for `(__thumb2__ || !__thumb__)', we ensure that the
assembly routine is only avoided when generating Thumb-1 code.
Given that this is performance-sensitive function, this improves
`ftbench' as follows on a Galaxy Nexus:
Before (us/op) After (us/op)
- loading Arial.ttf glyphs at 14 ppem [1]
Load 34.285 33.098
- same operation with the light auto-hinter [2]
Load 31.317 29.590
- same operation without hinting [3]
Load 6.143 5.376
- loading Arial.ttf advances at 14 ppem [4]
Load_Advances (normal) 34.216 33.016
Load_Advances (fast) 0.176 0.176
[1] ftbench -t 5 -p -s 14 -b a -f 0008 Arial.ttf
[2] ftbench -t 5 -p -s 14 -b a -r 1 -f 0028 Arial.ttf
[3] ftbench -t 5 -p -s 14 -b a -f 000a Arial.ttf
[4] ftbench -t 5 -p -s 14 -b b -f 0008 Arial.ttf
* builds/unix/ftconfig.in, include/freetype/config/ftconfig.h
(FT_MULFIX_ASSEMBLER): Fix handling for ARMv7.
If memory allocations fail at certain points while opening a font,
FreeType can either crash due to a NULL dereference or leak memory.
* include/freetype/internal/ftobjs.c (FT_Face_InternalRec,
FT_LibraryRec): Make `refcount' a signed integer. If, for example,
FT_Open_Face() fails in a memory allocation before the face's
reference count is set to 1, a subsequent `FT_Done_Library' call
would otherwise loop over `FT_Done_Face' 2^32 times before freeing
the face.
* src/base/ftobjs.c (open_face): Initialize `stream' and friends
earlier.
(FT_Open_Face) <Fail>: Behave correctly if `node' is NULL.
(FT_Destroy_Module) <Fail>: Check that `renderer_clazz' is valid.
* include/freetype/internal/ftdebug.h: Move pragmas to...
* include/freetype/internal/internal.h: ... this file since it gets
included by all source files.
* include/freetype/internal/ftserv.h: Remove pragma which has no
effect.
* src/truetype/ttgload.c (TT_Load_Glyph): Use the glyph's (scaled)
`linearHoriAdvance' if the sbit's `horiAdvance' value is zero.
Cf. font `Fixedsys Excelsior' v3.01 (FSEX300.ttf), glyph A, 16ppem.
This code, present since eight(!) years in the unused `CACHE'
branch, has been forgotten to apply to the master branch. It's
really amazing that noone has ever complained since
`FTC_Manager_Reset' is pretty useless without flushing the cache.
* include/freetype/internal/ftdebug.h: Remove pragmas.
* include/freetype/internal/ftserv.h: Use push and pop for pragmas.
* include/freetype/internal/ftvalid.h: Handle warning C4324.
* src/base/ftobjs.c: Use push and pop for pragmas.
* src/gzip/ftgzip.c: Handle warning C4244.
This is for `FT_Get_Advance'.
There are 7 places where the spec says the width can be defined:
hstem/hstemhm
vstem/vstemhm
cntrmask/hintmask
hmoveto
vmoveto
rmoveto
endchar
* src/cff/cf2intrp.c (cf2_doStems): Exit early for width-only calls,
if possible.
(cf2_interpT2CharString) <cf2_cmdHSTEM>, <cf2_cmdVSTEM>,
<cf2_cmdVMOVETO>, <cf2_cmdENDCHAR>, <cf2_cmdHINTMASK>,
<cf2_cmdRMOVETO>, <cf2_cmdHMOVETO>: Exit early for width-only calls.
* src/base/ftobjs.c: Fix typo in MS pragma.
* src/base/bdflib.c (_bdf_set_default_spacing, _bdf_add_property):
`lineno' is only used in debug mode.
* src/cff/cf2ft.c (cf2_builder_moveTo): `params' is only used in
debug mode.
http://cppcheck.sourceforge.net/
Note that the current version heavily chokes on FreeType, delivering
even wrong results. I will report those issues to the cppcheck team
so that a newer version gives improved results hopefully.
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/base/ftmac.c ,builds/mac/ftmac.c (count_faces_scalable):
Remove unused variable.
* src/base/ftdbgmem.c (ft_mem_table_destroy): `table' can't be zero.
* src/gxvalid/gxvkern.c (gxv_kern_subtable_fmt1_entry_validate):
Remove functionless code.
* src/tools/ftrandom.c (main): Fix memory leak.
This controls whether the old FreeType CFF engine gets compiled into
FreeType. It is now disabled by default.
* devel/ftoption.h, include/freetype/config/ftoption.h
(CFF_CONFIG_OPTION_OLD_ENGINE): New macro.
* src/cff/cffdrivr.c (cff_property_set), src/cff/cffgload.c
(CFF_Operator, cff_argument_counts, cff_builder_add_point,
cff_operator_seac, cff_decoder_parse_charstrings, cff_slot_load),
src/cff/cffgload.h, src/cff/cffobjs.c (cff_driver_init): Use
CFF_CONFIG_OPTION_OLD_ENGINE to guard the affected code.
* docs/CHANGES: Updated.
A new load flag, FT_LOAD_COLOR, makes FreeType load color
embedded-bitmaps, following this draft specification
https://color-emoji.googlecode.com/git/specification/v1.html
which defines two new SFNT tables, `CBDT' and `CBLC' (named and
modeled after `EBDT' and `EBLC', respectively). The color bitmaps
are stored in the new FT_PIXEL_MODE_BGRA format to represent BGRA
pre-multiplied sRGB images. If PNG support is available, PNG color
images as defined in the same proposed specification are supported
also.
Note that color bitmaps are converted to grayscale if client didn't
ask for color.
* builds/unix/configure.raw: Search for libpng.
Add `--without-png' option.
* devel/ftoption.h, include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_PNG): New macro.
* include/freetype/freetype.h (FT_LOAD_COLOR): New load flag.
* include/freetype/ftimage.h (FT_Pixel_Mode): Add
`FT_PIXEL_MODE_BGRA'.
* include/freetype/tttags.h (TTAG_CBDT, TTAG_CBLC): New tags.
* src/base/ftbitmap.c (FT_Bitmap_Embolden): Updated.
(ft_gray_for_premultiplied_srgb_bgra): New function.
(FT_Bitmap_Convert): Handle FT_PIXEL_MODE_BGRA.
* src/sfnt/pngshim.c, src/sfnt/pngshim.h: New files.
* src/sfnt/sfnt.c: Include `pngshim.c'.
* src/sfnt/ttsbit.c: Include FT_BITMAP_H and `pngshim.h'
(tt_face_load_eblc): Load `CBLC'.
(tt_sbit_decoder_init): Load `CBDT'.
(tt_sbit_decoder_alloc_bitmap): Pass load flags to select between
color and grayscale bitmaps.
Set `num_grays'. This is used by `ftview' to choose the blending
algorithm.
(tt_sbit_decoder_load_byte_aligned,
tt_sbit_decoder_load_bit_aligned, tt_sbit_decoder_load_compound,
tt_sbit_decoder_load_image): Pass load flag.
s/write/pwrite/.
Don't call `tt_sbit_decoder_alloc_bitmap'.
Updated.
(tt_sbit_decoder_load_png) [FT_CONFIG_OPTION_USE_PNG]: New function.
(tt_sbit_decoder_load_bitmap): Pass load flag.
Handle new glyph formats 17, 18, and 19.
Call `tt_sbit_decoder_alloc_bitmap'.
Flatten color bitmaps if necessary.
(tt_face_load_sbit_image): Updated.
* src/sfnt/rules.mk (SFNT_DRV_SRC): Add `pngshim.c'.
* docs/CHANGES: Updated.
Make `apinames' create an import file for NetWare.
* src/tools/apinames.c (PROGRAM_VERSION): Set to 0.2.
(OutputFormat): Add `OUTPUT_NETWARE_IMP'.
(names_dump): Handle it.
(usage): Updated.
(main): Handle new command line flag `-wN'.
Some small enhancements have allowed the removal of many macros and
the simplification of existing rules in `ttsubpix.c'.
* src/truetype/ttsubpix.h (SPH_TWEAK_ALLOW_X_DMOVEX,
SPH_TWEAK_ALLOW_X_MOVE_ZP2,
SPH_TWEAK_DELTAP_SKIP_EXAGGERATED_VALUES,
SPH_TWEAK_SKIP_INLINE_DELTAS, SPH_TWEAK_MIRP_CVT_ZERO): Removed.
(SPH_TWEAK_SKIP_NONPIXEL_Y_MOVES_DELTAP): New rule macro.
* src/truetype/ttsubpix.c: Updated affected rules.
* src/truetype/ttinterp.c (Direct_Move_X): Updated.
(INS_FDEF): Add additional function detection.
(INS_ENDF): Set runtime flag.
(Ins_CALL): Skip the call under certain conditions.
Remove bad code.
(Ins_LOOPCALL): Skip the call under certain conditions.
Remove bad code.
(Move_Zp2_Point): Updated.
(Ins_SHPIX): Updated.
Skip the move under some situations.
(Ins_MIAP): Improve conditions.
(Ins_MIRP): Updated.
(Ins_DELTAP): Skip move under certain conditions.
Simplify conditions.
(TT_RunIns): Updated.
Add code to handle new function detection.
Trace messages.
This makes the option TT_CONFIG_OPTION_SUBPIXEL_HINTING controllable
at runtime.
* src/truetype/ttdriver.c: Include FT_TRUETYPE_DRIVER_H.
(tt_property_set, tt_property_get): Fill templates.
* src/truetype/ttobjs.h (TT_DriverRec): Add `interpreter_version'
member.
Remove unused `extension_component' member.
* src/truetype/ttgload.c: Include FT_TRUETYPE_DRIVER_H.
(tt_get_metrics, TT_Hint_Glyph, TT_Process_Simple_Glyph,
compute_glyph_metrics, tt_loader_init): Use `interpreter_version'.
* src/truetype/ttinterp.c: Include FT_TRUETYPE_DRIVER_H.
(SUBPIXEL_HINTING): New macro to check `interpreter_version' flag.
Update all affected functions to use it.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
* src/truetype/ttobjs.c: Include FT_TRUETYPE_DRIVER_H.
(tt_driver_init): Initialize `interpreter_version'.
* src/truetype/ttsubpix.c: Include FT_TRUETYPE_DRIVER_H.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
* src/truetype/ttdrivr.c: Include FT_SERVICE_PROPERTIES_H.
(tt_property_set, tt_property_get): New functions, still empty.
Define `tt_service_properties' service.
Update `tt_services'.
* src/truetype/ttpic.h: Include FT_SERVICE_PROPERTIES_H.
(TT_SERVICE_PROPERTIES_GET): New macro.
(TTModulePIC): Add `tt_service_properties'.
==========================
Tag sources with `VER-2-4-12'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.12.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/vc2010/freetype.vcxproj, builds/win32/vc2010/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.11/2.4.12/, s/2411/2412/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 12.
* builds/unix/configure.raw (version_info): Set to 16:1:10.
Reported by numerous people on the `freetype-devel' list. Without
this fix, glyphs aren't properly aligned on a common baseline.
On 64bit systems, `FT_Pos' expands to `long int', having a width of
64bit. `CF2_Fixed' expands to `int' which is normally 32bit wide on
64bit hosts also. Wrong casts filled up the blues arrays with
incorrect values. Note that all blues values are accessed with the
`cf2_blueToFixed' macro which handles the 64bit to 32bit conversion.
* src/cff/cf2ft.h (cf2_getBlueValues, cf2_getOtherBlues,
cf2_getFamilyBlues, cf2_getFamilyOtherBlues): Use `FT_Pos' for
`data', not `CF2_Fixed'.
* src/cff/cf2ft.c (cf2_getBlueValues, cf2_getOtherBlues,
cf2_getFamilyBlues, cf2_getFamilyOtherBlues): Updated.
* src/cff/cf2blues.c (cf2_blues_init): Updated.
* src/base/ftcalc.c (FT_DivFix): Use unsigned values for
computations which use the left shift operator and convert to signed
as the last step.
* src/base/fttrigon.c (ft_trig_prenorm, FT_Vector_Rotate,
FT_Vector_Length, FT_Vector_Polarize): Ditto.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Simplify.
* src/cff/cffload.c (cff_subfont_load): Fix constant.
* src/cff/cffparse.c (cff_parse_integer, cff_parse_real, do_fixed,
cff_parse_fixed_dynamic): Use unsigned values for computations which
use the left shift operator and convert to signed as the last step.
* src/cid/cidload.c (cid_get_offset): Ditto.
* src/psaux/psconv.c (PS_Conv_ToFixed): Ditto.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Ditto.
* src/truetype/ttinterp.c (TT_MulFix14, TT_DotFix14): Ditto.
* include/freetype/internal/ftstream.h: Simplify and fix integer
extraction macros.
(FT_INT8_, FT_BYTE_I16, FT_BYTE_I32, FT_INT8_I16, FT_INT8_I32,
FT_INT8_I32, FT_INT8_U32): Removed.
(FT_PEEK_SHORT, FT_PEEK_LONG, FT_PEEK_OFF3, FT_PEEK_SHORT_LE,
FT_PEEK_LONG_LE, FT_PEEK_OFF3_LE): Use unsigned values for
computations and convert to signed as the last step.
* src/cff/cf2fixed.h (cf2_intToFixed, cf2_fixedToInt,
cf2_fracToFixed): Avoid shifts of negative values.
(cf2_intToFrac, cf2_fixedToFrac, cf2_fixedTo26Dot6): Removed,
unused.
* src/cff/cf2intrp.c (cf2_interpT2CharString) <cf2_cmdEXTENDEDNMBR,
default>: Use unsigned values for computations and convert to signed
as the last step.
Use proper types in tracing messages.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Use unsigned
values for computation of operands and convert to signed as the last
step.
Use proper type in tracing message.
This work, written by Dave Arnold <darnold@adobe.com> and fully
integrated into FreeType by me, is a donation by Adobe in
collaboration with Google. It is vastly superior to the old CFF
engine, and it will replace it soon. Right now, it is still off by
default, and you have to explicitly select it using the new
`hinting-engine' property of the cff driver.
For convenience, (most of) the new files are committed separately.
* include/freetype/config/ftheader.h (FT_CFF_DRIVER_H): New macro.
* include/freetype/ftcffdrv.h: New file to access CFF driver
properties.
* include/freetype/fterrdef.h (FT_Err_Glyph_Too_Big): New error
code.
* include/freetype/internal/fttrace.h: Add `cf2blues', `cf2hints',
and `cf2interp'.
* src/cff/cffgload.h (CFF_SubFont): New member `current_subfont'.
* src/cff/cffobjs.h (CFF_DriverRec): New members `hinting_engine'
and `no_stem_darkening'.
* src/cff/cfftypes.h (CFF_FontRec): New member `cf2_instance'.
* src/cff/cff.c: Include new files.
* src/cff/cffdrivr.c (cff_property_set, cff_property_get): Handle
`hinting-engine' and `no-stem-darkening' properties (only the Adobe
engine listens to them).
* src/cff/cffgload.c: Include `cf2ft.h'.
(cff_decoder_prepare): Initialize `current_subfont'.
(cff_build_add_point): Handle Adobe engine which uses 16.16
coordinates.
(cff_slot_load): Handle FT_LOAD_NO_SCALE and FT_LOAD_NO_HINTING
separately.
Choose rendering engine based on `hinting_engine' property.
* src/cff/cffload.c (cff_font_done): Call finalizer of the Adobe
engine.
* src/cff/cffobjs.c: Include FT_CFF_DRIVER_H.
(cff_driver_init): Set default property values.
* src/cff/rules.mk (CFF_DRV_SRC, CFF_DRV_H): Add new files.
* src/cff/cf2*.*: New files, containing the Adobe engine.
* src/cff/cffgload.c (check_points): Rename to...
(cff_check_points): ...this and make it FT_LOCAL.
(cff_builder_add_point, cff_builder_add_point1,
cff_builder_start_point, cff_builder_close_contour,
cff_lookup_glyph_by_stdcharcode, cff_get_glyph_data,
cff_free_glyph_data): Make them FT_LOCAL.
* src/cff/cffgload.h: Updated.
Use `FT2_DEBUG=bitmap:3' for tracing.
* src/base/md5.c, src/base/md5.h: New files, taken from
http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
* include/freetype/internal/fttrace.h: Add `bitmap'.
* src/base/ftobjs.c [FT_DEBUG_LEVEL_TRACE]: Include `md5.c'
(FT_Render_Glyph_Internal) [FT_DEBUG_LEVEL_TRACE]: For tracing,
convert resulting bitmap to a uniform format and compute a checksum.
Use `bitmap' category for the tracing message.
* src/base/rules.mk (BASE_H): Updated.
* docs/LICENSE.TXT: Updated.
* include/freetype/internal/ftserv.h (FT_DEFINE_SERVICEDESCREC7):
New macro.
* src/cff/cffdrivr.c: Include FT_SERVICE_PROPERTIES_H.
(cff_property_set, cff_property_get): New function, still empty.
Define `cff_service_properties' service.
Update `cff_services'.
* src/cff/cffpic.h: Include FT_SERVICE_PROPERTIES_H.
(CFF_SERVICE_PROPERTIES_GET): New macro.
CffModulePIC: Add `cff_service_properties'.
Some large packages using FreeType have to use a broken (deficient)
/bin/sh. The configure scripts (as generated by Autoconf) are
clever enough to find a better shell and put that one into the
environment variable CONFIG_SHELL. If that environment variable is
already set the script skips the test and assumes to be already
running under a good shell.
* builds/unix/detect.mk: Honour CONFIG_SHELL.
* builds/unix/unix-def.in (SHELL): Define.
Dave Arnold