On LLP64 platforms (e.g. Win64), unsigned long (32-bit)
cannot cover the memory address (64-bit). FT_MEM_VAL() is
used for hashing only and not dereferred, so using signed
type FT_PtrDist is safe.
* src/base/ftdbgmem.c (FT_MEM_VAL): Change the type of the
return value from FT_ULong to FT_PtrDist.
(ft_mem_table_resize): The type of hash is changed to
FT_PtrDist. (ft_mem_table_get_nodep): Ditto.
On LLP64 platforms (e.g. Win64), long (32-bit) cannot cover
the memory address (64-bit). Also the casts from the pointer
type to long int should be removed to preserve the address
correctly.
* src/raster/ftraster.c (New_Profile): Replace "%lx" by "%p".
(End_Profile) Ditto.
* src/truetype/ttinterp.c (Init_Context): Ditto.
FT_MAX_CURVE_DEVIATION is dependent on the value of ONE_PIXEL.
* src/smooth/ftgrays.c (FT_MAX_CURVE_DEVIATION): Remove it and
replace it everywhere with ONE_PIXEL/8.
When a resource fork access rule by Darwin VFS could open the
resource fork but no font is found in it, the rest of rules
by Darwin VFS are skipped. It reduces the warnings of the
deprecated resource fork access method by recent Darwin kernel.
Fix MacPorts ticket #18859:
http://trac.macports.org/ticket/18859
* src/base/ftobjs.c (load_face_in_embedded_rfork):
When FT_Stream_New() returns FT_Err_Cannot_Open_Stream, it
means that the file is possible to be fopen()-ed but zero-sized.
Also there is a case that the resource fork is not zero-sized,
but no supported font exists in it. If a rule by Darwin VFS
falls into such cases, there is no need to try other Darwin VFS
rules anymore. Such cases are marked by vfs_rfork_has_no_font.
If it is TRUE, the Darwin VFS rules are skipped.
MacOS X/Darwin kernel supports a few tricky methods to access
a resource fork via ANSI C or POSIX interface. Current resource
fork accessor tries all possible methods to support all kernels.
But if a method could open a resource fork but no font is found,
there is no need to try other methods older than tested method.
To determine whether the rule index is for Darwin VFS, a local
function ftrfork.c::raccess_rule_by_darwin_vfs() is introduced.
To use this function in ftobjs.c etc but it should be inlined,
it is exposed by ftbase.h.
* src/base/ftrfork.c (FT_RFork_Rule): New enum type to identify
the rules to access the resource fork.
(raccess_guess_rec): New structure to bind the rule function and
rule enum type.
(FT_Raccess_Guess): The list of the rule functions is replaced by
(raccess_guess_table): This. This is exposed to be used by other
intra module functions.
(raccess_rule_by_darwin_vfs): A function to return a boolean
if the rule specified by the rule index is based on Darwin VFS.
builds/unix/ftsystem.c prevents to open an useless stream from
zero-sized file and returns FT_Err_Cannot_Open_Stream, but the
stream drivers for ANSI C, Amiga and VMS return useless streams.
For cross-platform consistency, all stream drivers should act
same.
* src/base/ftsystem.c (FT_Stream_Open): If the size of the opened
file is zero, FT_Err_Cannot_Open_Stream is returned.
* builds/amiga/src/base/ftsystem.c (FT_Stream_Open): Ditto.
* src/vms/ftsystem.c (FT_Stream_Open): Ditto.
=========================
Tag sources with `VER-2-4-3'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.3
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.2/2.4.3/, s/242/243/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 3.
* builds/unix/configure.raw (version_info): Set to 12:1:6.
Based on a patch from Alexander Stohr <Alexander.Stohr@gmx.de>.
* configure: Compare directories using `ls -id'.
Check existence of `reference' subdirectory before creating it.
This fixes the flattening of cubic, S-shaped curves and speeds up
the handling of both the conic and cubic arcs.
See the discussions on the freetype-devel mailing list in late
August and September 2010 for details.
* src/smooth/ftgrays.c (FT_MAX_CURVE_DEVIATION): New macro.
(TWorker): Remove `conic_level' and `cubic_level' elements.
(gray_render_conic): Simplify algorithm.
(gray_render_cubic): New algorithm; details are given in the code
comments.
(gray_convert_glyph): Remove heuristics.
* src/cff/cffload.c (cff_charset_compute_cids): `charset->sids[i]'
is `FT_UShort'.
(cff_index_access_element): Don't use additions in comparison.
* src/sfnt/ttpost.c (load_format_20): Make `post_limit' of type
`FT_Long'.
Don't use additions in comparison.
Improve tracing messages.
(load_format_25, load_post_names): Make `post_limit' of type
`FT_Long'.
See Savannah bug #30975.
* src/cff/cffload.c (cff_index_access_element): `off2', the
offset to the next element is truncated at the end of the
stream to prevent invalid I/O. As `off1', the offset to the
requested element has been checked by FT_STREAM_SEEK(),
`off2' should be checked similarly.
See Savannah bug #30975.
* src/cff/cffload.c (cff_charset_compute_cids): Ignore CID if
greater than 0xFFFFU. CFF font spec does not mention about
maximum CID in the font, but PostScript and PDF spec define
that maximum CID is 0xFFFFU.
See Savannah bug #30975.
* src/cff/cffload.c (cff_charset_compute_cids): Don't increment
max_cid after detecting max CID. The array CFF_Charset->cids
is allocated by max_cid + 1.
(cff_charset_cid_to_gindex): Permit CID is less than or equal
to CFF_Charset->max_cid.
* src/cff/cffobjs.c (cff_face_init): FT_Face->num_glyphs is
calculated as CFF_Charset->max_cid + 1.
* src/truetype/ttpload.c (tt_face_get_location): If `pos1', the
offset to the requested entry in `glyf' exceeds the end of the
table, return offset=0, length=0. If `pos2', the offset to the
next entry in `glyf' exceeds the end of the table, truncate
the entry length at the end of `glyf' table.
See Savannah bug #31040.
* src/sfnt/ttpost.c (load_post_names): Get the length of
`post' table and pass the limit of `post' table to
load_format_20() and load_format_25().
(load_format_20): Stop the parsing when we reached at the
limit of `post' table. If more glyph names are required,
they are filled by NULL names. See Savannah bug #31040.
* src/truetype/ttinterp.c (free_buffer_in_size): Don't duplicate
FT_GlyphZoneRec size->twilight to be freed. If duplicated,
FT_FREE() erases the duplicated pointers only and leave original
pointers. They can cause the double-free crash when the burst
errors occur in TrueType interpreter and free_buffer_in_size()
is invoked repeatedly. See Savannah bug #31040 for detail.
Patch is suggested by Adrian Bunk, to prevent unexpected
reflection of environmental LIBTOOL. See:
http://savannah.nongnu.org/patch/?7290
* builds/unix/unix-cc.in: LIBTOOL is unconditionally set to
$(FT_LIBTOOL_DIR)/libtool. FT_LIBTOOL_DIR is set to $(BUILD_DIR)
by default.
* configure: When configured for the building out of source tee,
FT_LIBTOOL_DIR is set to $(OBJ_DIR).
* src/truetype/ttinterp.c (TT_RunIns): Decrease the trace level
showing the error when the interpreter returns with an error,
from FT_TRACE7() to FT_TRACE1().
* src/truetype/ttinterp.c (free_buffer_in_size): New function to
free the buffer allocated during the interpretation of this glyph.
(TT_RunIns): Unset FT_Face->size->{cvt_ready,bytecode_ready} if
an error occurs in the bytecode interpretation. The interpretation
of invalid bytecode may break the function definitions and referring
them in later interpretation is danger. By unsetting these flags,
`fpgm' and `prep' tables are executed again in next interpretation.
Fix Savannah bug #30798, reported by Robert Swiecki.
* src/cff/cffload.c (cff_charset_load): Fix change from 2009-03-20:
The threshold for SIDs is not applicable here. I misinterpreted the
`SID values 65000 and above are available for implementation use'
sentence in the CFF specification.
Problem reported by Ivan Ninčić <inincic@pdftron.com>.
=========================
Tag sources with `VER-2-4-2'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.2
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.1/2.4.2/, s/241/242/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 2.
* builds/unix/configure.raw (version_info): Set to 12:0:6.
* src/base/ftobjs.c (FT_Done_Library): Specify the order of font
drivers in face closing process. Type42 faces should be closed
before TrueType faces, because a Type42 face refers another
internal TrueType face which is created from sfnt[] array on the
memory.
* src/truetype/ttinterp.c (BOUNDSL): New macro.
Change `BOUNDS' to `BOUNDSL' where appropriate.
* src/truetype/ttinterp.h (TT_ExecContextRec): Fix type of
`cvtSize'.
suzuki toshiya