unused `max_points' and `max_contours'.
* src/cid/cidobjs.c (cid_face_init), src/type1/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init): Update.
* include/freetype/internal/tttypes.h (TT_FaceRec): Remove unused
`max_components'.
* src/truetype/ttinterp.h (TT_ExecContextRec): Remove unused
`loadSize' and `loadStack'.
* src/truetype/ttinterp.c (TT_Done_Context, TT_Load_Context),
src/sfnt/ttload.c (tt_face_load_maxp): Update.
* src/cff/cffobjs.h (cff_size_select), src/sfnt/sfdriver.c
(sfnt_interface), src/truetype/ttdriver.c (tt_size_request): Fix
compiler errors/warnings when TT_CONFIG_OPTION_EMBEDDED_BITMAPS is not
defined.
* src/sfnt/ttmtx.c (tt_face_load_hmtx, tt_face_get_metrics): Fix
possible segment faults for the non-FT_OPTIMIZE_MEMORY'ed versions.
(finally!)
For most OpenType tables, `tt_face_load_xxxx' simply loads the table
and `face->root' is set later in `sfnt_load_face'. Here, we try to
make this work for _all_ tables.
* src/sfnt/ttsbit.c, src/sfnt/ttsbit0.c, src/sfnt/ttload.c,
src/sfnt/ttmtx.c: all `tt_face_load_xxxx' should load the table and
then exit. Error handling or setting face->root is done later in
`sfnt_load_face'.
Pretty trace messages.
* src/sfnt/sfobjs.c (sfnt_load_face): Work harder.
Mac bitmap-only fonts are not scalable.
Check that `face->header.Units_Per_EM' is not zero.
(LOAD_, LOADM_): Pretty trace messages.
* src/sfnt/ttsbit0.c (tt_face_load_strike_metrics): Read metrics from
`eblc'.
* src/sfnt/ttcmap.c (tt_face_build_cmaps), src/sfnt/ttpost.c
(load_format_20, load_format_25, tt_face_get_ps_name): Use
face->max_profile.numGlyphs, instead of face->root.num_glyphs.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
ft_glyphslot_grid_fit_metrics.
* src/truetype/ttgload.c (compute_glyph_metrics): Use
ft_glyphslot_grid_fit_metrics.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph): Use
ft_glyphslot_grid_fit_metrics.
FT_Outline_Get_CBox is called twice.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Modify metrics to more
reasonable values when emboldening outline glyphs. The theoretic
ones are unrealistic.
include/freetype/internal/psnames.h (removed),
include/freetype/internal/internal.h (FT_SERVICE_POSTSCRIPT_NAMES):
added new service to handle glyph name dictionaries, replacing
the old internal header named "psnames.h" by "services/svpsname.h"
note that this is different from "services/svpostnm.h" which only
handles the retrieval of Postscript font name for a given face.
(should we merge these two services into a single header ??)
* include/freetype/internal/ftserv.h: adding
FT_FACE_FIND_GLOBAL_SERVICE (used to lookup a service globally,
instead of only within the current module)
* include/freetype/internal/ftobjs.h, src/base/ftobjs.c: adding
the new base function ft_module_get_service
include/freetype/tttables.h, include/freetype/config/ftconfig.h,
include/freetype/internal/ftobjs.h,
include/freetype/internal/ftserv.h,
include/freetype/internal/internal.h,
include/freetype/internal/sfnt.h,
include/freetype/internal/tttypes.h,
include/freetype/internal/services/bdf.h,
include/freetype/internal/services/glyfdict.h,
include/freetype/internal/services/multmast.h,
include/freetype/internal/services/postname.h,
include/freetype/internal/services/sfnt.h,
include/freetype/internal/services/xf86name.h,
src/base/ftbdf.c, src/base/ftmm.c, src/base/ftobjs.c,
src/base/ftxf86.c, src/bdf/bdfdrivr.c, src/cff/cffdrivr.c,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/sfnt/sfdriver.c,
src/truetype/ttdriver.c, src/type1/t1driver.c, src/type42/t42drivr.c:
heavy internal modifications to introduce the concept of
"module services". This is the first step towards a massive
simplification of the engine's internals, in order to
get rid of various numbers of hacks.
Note that this changes will break source & binary compatibility
for authors of external font drivers.
Maybe 2.1.6 will be called 2.2.0 after all :-)
include/freetype/internal/ftobjs.h, include/freetype/internal/tttypes.h,
src/truetype/ttinterp.c, src/truetype/ttobjs.c, src/truetype/ttobjs.h:
changed the name of TT_CONFIG_OPTION_COMPILE_UNPATENTED_HINTING to
the simpler TT_CONFIG_OPTION_UNPATENTED_HINTING
removed the macro TT_CONFIG_OPTION_FORCE_UNPATENTED_HINTING. Instead,
the same effect can be used by setting a debug-hook with
FT_DEBUG_HOOK_UNPATENTED_HINTING globally with FT_Set_Debug_Hook()
#defines for the constants.
(FT_Open_Args): Change type of `flags' to FT_UInt.
(FT_GlyphSlot): Move `flags' to FT_Slot_Internal.
* include/freetype/ftimage.h (FT_Outline_Flags, FT_Raster_Flag):
Replaced with #defines for the constants.
* include/freetype/internal/ftobjs.h (FT_Slot_Internal): New
field `flags' (from FT_GlyphSlot).
Updated all affected source files.
(FT_GLYPH_OWN_BITMAP): New macro (from ftgloadr.h).
* include/freetype/internal/ftgloadr.h (FT_GLYPH_OWN_BITMAP): Moved
to ftobjs.h.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Use dummy
FT_GlyphSlot_Internal object.
ft_glyph_bbox_subpixels, ft_glyph_bbox_gridfit,
ft_glyph_bbox_truncate, ft_glyph_bbox_pixels): Replaced with
FT_GLYPH_BBOX_UNSCALED, FT_GLYPH_BBOX_SUBPIXELS,
FT_GLYPH_BBIX_GRIDFIT, FT_GLYPH_BBOX_TRUNCATE, FT_GLYPH_BBOX_PIXELS.
The lowercase variants are now (deprecated aliases) to the uppercase
versions.
Updated all other files.
* include/freetype/ftmodule.h (ft_module_font_driver,
ft_module_renderer, ft_module_hinter, ft_module_styler,
ft_module_driver_scalable, ft_module_driver_no_outlines,
ft_module_driver_has_hinter): Replaced with FT_MODULE_FONT_DRIVER,
FT_MODULE_RENDERER, FT_MODULE_HINTER, FT_MODULE_STYLER,
FT_MODULE_DRIVER_SCALABLE, FT_MODULE_DRIVER_NO_OUTLINES,
FT_MODULE_DRIVER_HAS_HINTER.
The lowercase variants are now (deprecated aliases) to the uppercase
versions.
Updated all other files.
* src/base/ftglyph.c (FT_Glyph_Get_CBox): Handle bbox_mode better
as enumeration.
* src/pcf/pcfdrivr.c (pcf_driver_class), src/winfonts/winfnt.c
(winfnt_driver_class), src/bdf/bdfdrivr.c (bdf_driver_class): Add
the FT_MODULE_DRIVER_NO_OUTLINES flag.
correctly.
* src/pshinter/pshglob.c (psh_globals_new): Change calculation of
dim->stdw.count to avoid compiler problem.
* src/truetype/ttgload.c (TT_Load_Simple_Glyph): Move the block
variables to the beginning of the function to avoid compiler
problems.
Add casts necessary for 16bit compilers.
* src/pfr/rules.mk (PFR_DRV_SRC): Add pfrsbit.c.
(PFR_DRV_H): Add pfrtypes.h.
* include/freetype/config/ftconfig.h: s/__MWKS__/__MWERKS__/.
* src/pfr/pfrsbit.c (pfr_bitwriter_init): Change type of third
argument to FT_Bool.
(pfr_lookup_bitmap_data): Change type of third and fourth argument
to FT_UInt. Updated caller.
(pfr_load_bitmap_bits): Change type of fourth argument to FT_Bool.
include/freetype/internal/ftobjs.h,
include/freetype/internal/psaux.h, src/cid/cidgload.c,
src/psaux/psobjs.c, src/psaux/t1decode.c, src/psaux/psobjs.h,
src/pshinter/pshrec.c, src/pshinter/pshalgo.c,
src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfobjs.c,
src/smooth/ftgrays.c, src/smooth/ftsmooth.c, src/truetype/ttobjs.c,
src/truetype/ttdriver.c, src/truetype/ttgload.c, src/type1/t1afm.c,
src/type1/t1gload.c, src/type1/t1gload.h, src/type1/t1load.c,
src/type1/t1objs.c, src/type42/t42parse.c, src/type42/t42parse.h:
Many casts and slight argument type changes to make it work with
a 16bit compiler.
wrapper for ah_hint_edges.
(ah_hint_edges): Renamed to...
(ah_hinter_hint_edges): This.
* src/base/ftobjs.c (FT_Set_Hint_Flags): Removed. Unused.
* include/freetype/internal/ftobjs.h (FT_Face_InternalRec),
include/freetype/internal/psaux.h (T1_DecoderRec),
src/cff/cffgload.h (CFF_Builder): Remove `hint_flags' field.
Unused.
* src/cff/cffgload.c (cff_builder_init): Updated.
(cff_decoder_parse_charstrings) <cff_op_endchar>: Call hinter->apply
with decoder->hint_mode instead of builder->hint_flags.
* src/psaux/t1decode.c (t1_decoder_init): Updated.
* src/base/ftstroker.c (ft_stroke_border_export): s/index/idx/.
* src/sfnt/sfobjs.c (sfnt_load_face): Commented out code which
increased root->height by 15% if the line gap was zero. There exist
fonts (containing e.g. form drawing characters) which intentionally
have a zero line gap value.
* include/freetype/internal/ftobjs.h, src/base/ftobjs.c, src/bdf/bdfdrivr.c,
src/pcf/pcfdriver.c, src/pfr/pfrsbit.c, src/sfnt/ttsbit.c,
src/type42/t42objs.c, src/winfonts/winfnt.c: introduced three new functions
to deal with glyph bitmaps within FT_GlyphSlot objects. these are:
ft_glyphslot_free_bitmap
ft_glyphslot_alloc_bitmap
ft_glyphslot_set_bitmap
these are much more convenient to use than managing the FT_GLYPH_OWN_BITMAP
flag manually. the font drivers have been modified to use them as well.
* src/cache/ftlru.c: fixed an invalid assertion check
src/base/ftbdf.c, src/bdf/bdfdrivr.c, src/pcf/pcfdrivr.c,
src/pcf/pcfread.h:
adding a new API, named FT_Get_BDF_Property to retrieve the BDF
properties of a given PCF or BDF font
tt_face_get_ps_name): Replace switch statement with if clauses to
make it more portable.
* src/cff/cffobjs.c (cff_face_init): Ditto.
* include/freetype/ftmodule.h (FT_Module_Class): Use `FT_Long' for
`module_size'.
* include/freetype/ftrender.h (FT_Glyph_Class_): Use `FT_Long' for
`glyph_size'.
* src/base/ftobjs.c (FT_Render_Glyph): Change second parameter to
`FT_Render_Mode'.
(FT_Render_Glyph_Internal): Change third parameter to
`FT_Render_Mode'.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Change second parameter
to `FT_Render_Mode'.
* src/raster/ftrend1.c (ft_raster1_render): Change third parameter
to `FT_Render_Mode'.
* src/smooth/ftsmooth.c (ft_smooth_render, ft_smooth_render_lcd,
ft_smooth_render_lcd_v): Ditto.
(ft_smooth_render_generic): Change third and fifth parameter to
`FT_Render_Mode'.
* include/freetype/freetype.h, include/freetype/internal/ftobjs.h,
include/freetype/ftglyph.h: Updated.
* src/cff/cffdrivr.c (Load_Glyph), src/pcf/pcfdriver.c
(PCF_Glyph_Load), src/pfr/pfrobjs.c (pfr_slot_load),
src/winfonts/winfnt.c (FNT_Load_Glyph), src/t42/t42objs.c
(T42_GlyphSlot_Load), src/bdf/bdfdrivr.c (BDF_Glyph_Load): Change
fourth parameter to `FT_Int32'.
* src/pfr/pfrobjs.c (pfr_face_init): Add two missing parameters
and declare them as unused.
* src/cid/cidparse.h (CID_Parser): Use FT_Long for `postscript_len'.
* src/psnames/psnames.h (PS_Unicode_Value_Func): Change return
value to FT_UInt32.
* src/psnames/psmodule.c (ps_unicode_value, ps_build_unicode_table):
Updated accordingly.
* src/cff/cffdrivr.c (Get_Kerning): Use FT_Long for `middle'.
(cff_get_glyph_name): Use cast for result of ft_strlen.
* src/cff/cffparse.c (cff_parse_real): User cast for assigning
`exp'.
* src/cff/cffload.c (cff_index_get_pointers): Use FT_ULong for
some local variables.
(cff_charset_load, cff_encoding_load): Use casts to FT_UInt for some
switch statements.
(cff_font_load): Use cast in call to CFF_Load_FD_Select.
* src/cff/cffobjs.c (cff_size_init): Use more casts.
(cff_face_init): Use FT_Int32 for `flags'.
* src/cff/cffgload.c (cff_operator_seac): Use cast for assigning
`adx' and `ady'.
(cff_decoder_parse_charstrings): Use FT_ULong for third parameter.
Use more casts.
* src/cff/cffcmap.c (cff_cmap_unicode_init): Use cast for `count'.
* src/cid/cidload.c (cid_read_subrs): Use FT_ULong for `len'.
* src/cid/cidgload.c (cid_load_glyph): Add missing cast for
`cid_get_offset'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings) <18>: Use
cast for `num_points'.
(t1_decoder_init): Use cast for assigning `decoder->num_glyphs'.
* src/base/ftdebug.c (ft_debug_init): Use FT_Int.
* include/freetype/internal/ftdriver.h (FT_Slot_LoadFunc): Use
`FT_Int32' for fourth parameter.
* src/base/ftobjs.c (open_face): Use cast for calling
clazz->init_face.
* src/raster/ftraster.c (Set_High_Precision): Use `1' instead of
`1L'.
(Finalize_Profile_Table, Line_Up, ft_black_init): Use casts.
* src/raster/ftrend1.c (ft_raster1_render): Ditto.
* src/sfnt/sfnt_dir_check: Compare `magic' with unsigned long
constant.
* builds/amiga/include/freetype/config/ftmodule.h: Updated.
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
preferences. The header freetype.h is not now affected, the interface is
specified via an FT_Parameter, the pointer to the interface is hidden in an
internal part of the face record, and all the definitions are in ftincrem.h.
freetype/internal/ftobjs.h, freetype/internal/psaux.h,
freetype/internal/pshints.h, src/psaux/t1decode.c, src/cff/cffgload.h,
src/cff/cffgload.c, src/pshinter/pshalgo1.h, src/pshinter/pshalgo1.c,
src/pshinter/pshalgo2.h, src/pshinter/pshalgo2.c, src/pshinter/pshalgo3.h,
src/pshinter/pshalgo3.c: Adding support for hinter-specific bit flags,
and the new FT_Set_Hint_Flags high-level API
src/base/ftobjs.c, src/objs/fttype1.c, src/sfnt/ttcmap0.c,
src/smooth/ftgrays.c: changed uses of "setjmp" and "longjmp"
to "ft_setjmp" and "ft_lonjmp". Removed direct references to
<stdio.h> and <setjmp.h> when appropriate, to eventually replace
them with a FT_CONFIG_STANDARD_LIBRARY_H. Useful for the XFree86
Font Server backend based on FT2.
warn about the GNU Make requirement at compile time..
* include/freetype/config/ftstdlib.h,
include/freetype/config/ftconfig.h,
include/freetype/config/ftheader.h,
include/freetype/internal/ftmemory.h,
include/freetype/internal/ftobjs.h,
src/autohint/ahoptim.c,
src/base/ftdbgmem.c, src/base/ftdebug.c,
src/base/ftmac.c, src/base/ftobjs.c,
src/base/ftsystem.c,
src/cache/ftcimage.c, src/cache/ftcsbits.c,
src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c,
src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c,
src/pcf/pcfdriver.c, src/pcf/pcfread.c,
src/psaux/t1cmap.c, src/psaux/t1decode.c,
src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c,
src/pshinter/pshrec.c,
src/psnames/psmodule.c,
src/raster/ftraster.c,
src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c,
src/smooth/ftgrays.c,
src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c,
src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c:
added the new configuration file "ftstdlib.h" used to define
aliases for all ISO C library functions used by the engine
(e.g. strlen, qsort, setjmp, etc...)
this eases the porting of FreeType 2 to exotic environments like
XFree86 modules/extensions..
also removed many #include <string.h>, #include <stdlib.h>, etc...
from the engine's sources where they're not needed..
src/sfnt/Jamfile, src/sfnt/rules.mk,
src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttcmap0.c, src/sfnt/ttcmap0.h:
updated the SFNT charmap support to use FT_CMaps
include/freetype/internal/ftobjs.h,
src/base/ftapi.c, src/base/ftobjs.c,
src/cff/cffdrivr.c, src/cff/cffdrivr.h,
src/cid/cidriver.c, src/cid/cidriver.h,
src/pcf/pcfdriver.c, src/pcf/pcfdriver.h,
src/truetype/ttdriver.c, src/truetype/ttdriver.h,
src/type1/t1driver.c, src/type1/t1driver.h,
src/winfonts/winfnt.c, src/winfonts/winfnt.h:
updating the type definitions for font font drivers
the debug sub-system initialization. trace levels can now be specified
within the "FT2_DEBUG" environment variable. See the comments within
"ftdebug.c" for more details
* include/freetype/internal/fttrace.h: new file to define the trace
levels used for debugging. it is used both to define enums and
toggle names for FT2_DEBUG
* src/base/ftobjs.c, src/base/ftstream.c: FT_Assert renamed to
FT_ASSERT
* include/freetype/internal/ftextend.h, src/base/ftextend.c,
src/base/Jamfile, src/base/rules.mk: removing "ftextend" from the
library, since it is now completely obsolete..
correct glyph names tables. This resulted in the unavailability of
certain glyphs like `Cacute', `cacute' and `lslash' in Unicode
charmaps, even if these were present in the font (causing problems
for Polish users).
* src/tools/glnames.py (mac_standard_names): Fixed.
(t1_standard_strings): Some fixes and renamed to ...
(sid_standard_names): This.
(t1_expert_encoding): Fixed.
(the_adobe_glyph_list): Renamed to ...
(adobe_glyph_names): This.
(the_adobe_glyphs): Renamed to ...
(adobe_glyph_values): This.
(dump_mac_indices, dump_glyph_list, dump_unicode_values, main):
Updated.
* src/psnames/pstables.h: Regenerated.
* src/psnames/psmodule.c (PS_Unicode_Value): Fix offset.
Fix return value.
Use `sid_standard_table' and `ps_names_to_unicode' instead of
`t1_standard_glyphs' and `names_to_unicode'.
(PS_Macintosh_Name): Use `ps_glyph_names' instead of
`standard_glyph_names'.
(PS_Standard_Strings): Use `sid_standard_names' instead of
`t1_standard_glyphs'.
* doc/BUGS, doc/TODO: New documents.
* src/cache/ftlru.c (FT_Lru_Lookup_Node): Fixed a bug that prevented
correct LRU behaviour.
setjmp() and longjmp() are now used for rollback (i.e. when memory
pool overflow occurs).
Function names are now all uniformly prefixed with `gray_'.
* src/smooth/ftgrays.c: Include <setjmp.h>.
(ErrRaster_MemoryOverflow): New macro.
(TArea): New type to store area values in each cell (using `int' was
too small on 16-bit systems). <limits.h> is included to properly
get the needed data type.
(TCell, TRaster): Use it.
(TRaster): New element `jump_buffer'.
(gray_compute_cbox): Use `RAS_ARG' as the only parameter and get
`outline' from it.
(gray_record_cell): Use longjmp().
(gray_set_cell): Use gray_record_cell() for error handling.
(gray_render_line, gray_render_conic, gray_render_cubic): Simplify.
(gray_convert_glyph_inner): New function, using setjmp().
(gray_convert_glyph): Use it.
Provide a public API to manage multiple size objects for a given
FT_Face in the new header file `ftsizes.h'.
* include/freetype/ftsizes.h: New header file,
* include/freetype/internal/ftobjs.h: Use it.
Remove declarations of FT_New_Size and FT_Done_Size (moved to
ftsizes.h).
* include/freetype/config/ftheader.h (FT_SIZES_H): New macro.
* src/base/ftobjs.c (FT_Activate_Size): New function.
* src/cache/ftcmanag.c: Include ftsizes.h.
(ftc_manager_init_size, ftc_manager_flush_size): Use
FT_Activate_Size.
`__' (those which haven't converted yet). Fixed minor conversion
issues.
* src/winfonts/winfnt.c: Updated to new header inclusion scheme.
* */*.[ch]: Changed source files to adhere to the new
* src/cff/cff.c, src/cff/rules.mk: Updated.
* */*.[ch]: Now using <ft2build.h> as the default build and setup
default..
- created "builds/devel" to hold developer builds options
for both Win32 and Unix
- fixed a bug in the winfonts driver, where the glyph image format
wasn't set correctly..
objects:
FT_Face_Internal, FT_Size_Internal, FT_Slot_Internal
these contain some fields that may change between releases
of FreeType, without affecting the size of FT_FaceRec,
FT_SizeRec, FT_GlyphSlotRec, etc.., which means that
drivers wouldn't need to be recompiled if we only add new
fields to an internal structure..
I plan to hack a few things related to the auto-hinter and
I need this move to ensure that we will not break binary
compatibility between 2.0 and 2.1 :-)
- David
to access individual glyph names. Changed some
drivers to support it through a new interface named
"glyph_name".
- introduced FT_Get_Sfnt_Name (see ftnames.h)
to access the SFNT name table in a TrueType/OpenType
file..
Moving some internal structures and constants from freetype.h to ftobjs.h.
Finally removing FT_LOAD_ANTI_ALIAS.
Cleaning up all error codes. Only the used ones have survived :-)
Removed unused FT_MAX_GLYPH_FORMATS constant.
T2 error codes are now in the range 0x500-0x5FF (instead of `TrueDoc').
Some minor improvements of error return values.
Finally fixing error code values in ftraster and ftgrays to be compliant
with all other FT error codes.
C++ programs easier:
Renamed FT_WordXX to FT_UIntXX.
Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType
always accesses streams byte-wise, so this makes sense IMHO.
Added a lot of #ifdef __cplusplus to header files (and removed a few).
Other minor syntax fixes (mostly casts).
Replaced the variable `private' with `private_dict' -- `private' is
reserved in C++.
It is now really the "glyph factory" that Stefan was probably
dreaming about..
fixed some recent formatting errors from Werner ;-)
cleaned up the demonstration programs from most of the
rust that they had, though I'm sure someone is going to
re-format them really soon !!
"ftstring" now uses the new ftglyph.h API, and is now
faster and smaller.. yep..
A lot of internal modifications have been performed lately on the
source in order to provide the following enhancements:
- more generic module support:
The FT_Module type is now defined to represent a handle to a given
module. The file <freetype/ftmodule.h> contains the FT_Module_Class
definition, as well as the module-loading public API
The FT_Driver type is still defined, and still represents a pointer
to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module,
FT_Get_Driver by FT_Get_Module, etc..
- support for generic glyph image types:
The FT_Renderer type is a pointer to a module used to perform various
operations on glyph image.
Each renderer is capable of handling images in a single format
(e.g. ft_glyph_format_outline). Its functions are used to:
- transform an glyph image
- render a glyph image into a bitmap
- return the control box (dimensions) of a given glyph image
The scan converters "ftraster.c" and "ftgrays.c" have been moved
to the new directory "src/renderer", and are used to provide two
default renderer modules.
One corresponds to the "standard" scan-converter, the other to the
"smooth" one.
The current renderer can be set through the new function
FT_Set_Renderer.
The old raster-related function FT_Set_Raster, FT_Get_Raster and
FT_Set_Raster_Mode have now disappeared, in favor of the new:
FT_Get_Renderer
FT_Set_Renderer
see the file <freetype/ftrender.h> for more details..
These changes were necessary to properly support different scalable
formats in the future, like bi-color glyphs, etc..
- glyph loader object:
A new internal object, called a 'glyph loader' has been introduced
in the base layer. It is used by all scalable format font drivers
to load glyphs and composites.
This object has been created to reduce the code size of each driver,
as each one of them basically re-implemented its functionality.
See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for
more information..
- FT_GlyphSlot had new fields:
In order to support extended features (see below), the FT_GlyphSlot
structure has a few new fields:
linearHoriAdvance: this field gives the linearly scaled (i.e.
scaled but unhinted) advance width for the glyph,
expressed as a 16.16 fixed pixel value. This
is useful to perform WYSIWYG text.
linearVertAdvance: this field gives the linearly scaled advance
height for the glyph (relevant in vertical glyph
layouts only). This is useful to perform
WYSIWYG text.
Note that the two above field replace the removed "metrics2" field
in the glyph slot.
advance: this field is a vector that gives the transformed
advance for the glyph. By default, it corresponds
to the advance width, unless FT_LOAD_VERTICAL_LAYOUT
was specified when calling FT_Load_Glyph or FT_Load_Char
bitmap_left: this field gives the distance in integer pixels from
the current pen position to the left-most pixel of
a glyph image WHEN IT IS A BITMAP. It is only valid
when the "format" field is set to
"ft_glyph_format_bitmap", for example, after calling
the new function FT_Render_Glyph.
bitmap_top: this field gives the distance in integer pixels from
the current pen position (located on the baseline) to
the top-most pixel of the glyph image WHEN IT IS A
BITMAP. Positive values correspond to upwards Y.
loader: this is a new private field for the glyph slot. Client
applications should not touch it..
- support for transforms and direct rendering in FT_Load_Glyph:
Most of the functionality found in <freetype/ftglyph.h> has been
moved to the core library. Hence, the following:
- a transform can be specified for a face through FT_Set_Transform.
this transform is applied by FT_Load_Glyph to scalable glyph images
(i.e. NOT TO BITMAPS) before the function returns, unless the
bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags..
- once a glyph image has been loaded, it can be directly converted to
a bitmap by using the new FT_Render_Glyph function. Note that this
function takes the glyph image from the glyph slot, and converts
it to a bitmap whose properties are returned in "face.glyph.bitmap",
"face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original
native image might be lost after the conversion.
- when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph
and FT_Load_Char functions will call FT_Render_Glyph automatically
when needed.
rid of most of the basic types redefinitions (i.e. FT_Int instead
of "FT_Int", etc..)
The format-specific prefixs like "TT_", "T1_", "T2_" & 'CID_"
are now only used in relevant structures..
fixed Werner's fix to t2gload.c :-)
other small bug fixes