argument.
(bdf_get_font_property): Use `const' for third argument.
Updated all callers.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Set pixel width and height
similar to the PCF driver.
* src/bdf/bdf.h (_hashnode): Use `const' for `key'.
Updated.
* src/gzip/ftgzip.c: C++ doesn't like that the array `inflate_mask'
is declared twice. It is perhaps better to modify the zlip source
files directly instead of this hack.
(zcalloc, zfree, ft_gzip_stream_close, ft_gzip_stream_io): Add casts
to make build with g++ successful.
* README.UNX: removed (now replaced by docs/INSTALL.UNX)
* src/pshinter/pshalgo3.c: the hinter now performs as in 2.1.3 and
will ignore stem quantization only when FT_LOAD_TARGET_SMOOTH is used
* src/base/ftobjs.c: changed the default computations to include rounding
in all cases, this is required to provide accurate kerning data when
native TrueType hinting is enabled.
* src/type1/t1load.c: the Type 1 loader now accepts more general names
according to the Postscript spec (the previous one was too restrictive)
src/autohint/ahhint.c: fixed blue-scale problem
* src/cache/ftccache.c: fixed small bug that could crash the cache
in rare circumstances (mostly with broken fonts)
* include/freetype/internal/ftobjs.h, src/base/ftobjs.c, src/bdf/bdfdrivr.c,
src/pcf/pcfdriver.c, src/pfr/pfrsbit.c, src/sfnt/ttsbit.c,
src/type42/t42objs.c, src/winfonts/winfnt.c: introduced three new functions
to deal with glyph bitmaps within FT_GlyphSlot objects. these are:
ft_glyphslot_free_bitmap
ft_glyphslot_alloc_bitmap
ft_glyphslot_set_bitmap
these are much more convenient to use than managing the FT_GLYPH_OWN_BITMAP
flag manually. the font drivers have been modified to use them as well.
* src/cache/ftlru.c: fixed an invalid assertion check
to control memory debugging with FreeType. See the description of
"FT2_DEBUG_MEMORY", "FT2_ALLOC_TOTAL_MAX" and "FT2_ALLOC_COUNT_MAX"
in DEBUG.TXT
* src/cache/ftccache.c, src/cache/ftccmap.c, src/cache/ftcsbits.c,
ftlru.c: fixed the cache sub-system to correctly deal with out-of-memory
conditions.
* src/pfr/pfrobjs.c, src/pfr/pfrsbits.c: fixing compiler warnings and a
small memory leak
* src/psaux/psobjs.c (t1_reallocate_table): fixed a bug (memory leak) that
only happened when trying to resize an array would end in an OOM.
* src/smooth/ftgrays.c: removed compiler warnings / volatile bug
* src/truetype/ttobjs.c: removed segmentation fault that happened in
tight memory environments.
when available in Asian fonts
* src/sfnt/ttload.c, src/base/ftobjs.c: changed "asian" to "Asian" in
comments
* src/truetype/ttdriver.c (Set_Char_Sizes): fixed a rounding bug when
computing the scale factors for a given character size in points with
resolution.
when trying to read certain compressed gzip files. The following test
could be used to reveal the bug:
touch 0123456789 ; gzip 0123456789 ; ftdump 0123456789.gz
* src/pfr/pfrobjs.c, src/pfr/pfrload.c, src/pfr/pfrtypes.h: several
fixes to the PFR font driver:
- the list of available embedded bitmaps was not correctly set
in the root FT_FaceRec structure describing the face
- the glyph loader always tried to load the outlines when
FT_LOAD_SBITS_ONLY was specified
- the table loaded now scans for *undocumented* elements of a
physical font's auxiliary data record, this is necessary to
retrieve the "real" family and style names.
NOTE THAT THIS CHANGES THE FAMILY NAME OF MANY PFR FONTS !!
src/base/ftbdf.c, src/bdf/bdfdrivr.c, src/pcf/pcfdrivr.c,
src/pcf/pcfread.h:
adding a new API, named FT_Get_BDF_Property to retrieve the BDF
properties of a given PCF or BDF font
--copy' from libtool 1.4.3.
* builds/unix/aclocal.m4: Regenerated with `aclocal -I .' from
automake 1.7.1.
* builds/unix/configure: Regenerated with autoconf 2.54.
* builds/unix/config.guess, builds/unix/config.sub: Updated from
`config' CVS module at subversions.gnu.org.
* builds/unix/install-sh, builds/unix/mkinstalldirs: Updated from
`automake' CVS module at subversions.gnu.org.
include/freetype/ftwinfnt.h, src/base/winfnt.c, src/winfonts/winfnt.c,
src/base/Jamfile, src/base/rules.mk, src/base/descrip.mms:
added a Windows .FNT specific API (mostly for Wine). Also fixed a nasty
bug in the header loader which would cause invalid memory overwrites
* include/freetype/config/ftoption.h, src/autohint/ahglobal.h,
src/autohint/ahglobal.c, src/autohint/ahglyph.c,
src/autohint/ahtypes.h:
included David Chester's patches to the auto-hinter in order to
slightly improve the output. Note that everything is controlled
through the new FT_CONFIG_OPTION_CHESTER_HINTS defined at the
end of "ftoption.h", there are also individual FT_CONFIG_CHESTER_XXX
macros to control individual "features".
Note that all improvements are enabled by default, but can be
tweaked for optimization and testing purpose. The configuration
macros will most likely disappear in the short future.
2003-01-11 David Turner <david@freetype.org>
* include/freetype/internal/fnttypes.h: fixed a structure field
definition to avoid memory overwrites
the API is likely to change however.
* src/base/fttrigon.c (FT_Angle_Diff): fixing function, it returned
invalid values for large negative angle differences (resulting in
incorrect stroker computations, among other things)
* src/cache/ftccache.c (ftc_node_unlink): removing incorrect
assertion, and changing code to avoid hash table size contraction
* src/base/Jamfile, src/base/rules.mk, src/base/descrip.mms:
adding "ftstroker.obj" to default build, as optional component
src/gzip/inftrees.c, src/gzip/zconf.h, src/gzip/zlib.h,
src/gzip/zutil.h: updates to allow compilation without compiler
warnings with LCC-Win32
* include/freetype/freetype.h, docs/VERSION.DLL,
builds/unix/configure.ac: updates for the upcoming 2.1.4 release
src/gzip/inftrees.c, src/gzip/zconf.h, src/gzip/zlib.h,
src/gzip/zutil.h: updates to allow compilation without compiler
warnings with LCC-Win32
* include/freetype/freetype.h, docs/VERSION.DLL,
builds/unix/configure.ac: updates for the upcoming 2.1.4 release
better explain what's happening there
* src/base/ftobjs.c (open_face): included Graham Asher's fix to
prevent faces without Unicode charmaps from loading
* docs/VERSION.DLL: updating document to better explain the differences between
the three version numbers being used on Unix, as well as provide the AutoConf
fragment provided by Lars Clausen
* src/smooth/ftgrays.c (gray_render_conic): fixed small bug that
prevented bezier arcs with negative vertical coordinates to be rendered
appropriately
2002-11-27 Vincent Caron <v.caron@zerodeux.net>
* builds/unix/unix-def.in, builds/unix/freetype-config.in,
builds/unix/configure.ac, src/gzip/rules.mk, src/gzip/ftgzip.c:
adding support for system zlib installations when available on the
target platform (Unix only)
Now it loads UCS-4 charmaps when there is one.
* src/base/ftobjs.c (find_unicode_charmap): new function.
* src/base/ftobjs.c (open_face): refer to the above one.
* src/base/ftobjs.c (FT_Select_Charmap): idem.
accept pre-defined charsets, even when the font contains fewer glyphs.
also enforced more checks to ensure that we never overflow the
character codes array in the encoding.
src/otlayout/otlgsub.c, src/otlayout/otlgsub.h, src/otlayout/otlparse.c,
src/otlayout/otlparse.h, src/otlayout/otlutils.h:
updating the OpenType Layout code, adding support fot the first
GSUB lookups. Nothing that really compiles for now though
* src/autohint/ahhint.c: disabled serif stem width quantization. It
produces slightly better shapes though this is not distinguishable
with many fonts.
* include/freetype/config/ftoption.h, src/gzip/ftgzip.c: added
support for the FT_CONFIG_OPTION_SYSTEM_ZLIB option, used to specify
the use of system-wide zlib.
Note that this macro, as well as FT_CONFIG_OPTION_BYTECODE_INTERPRETER,
is not #undef-ed anymore. This allows the build system to define them
depending on the configuration (typically by adding -D flags at
compile time).
* src/sfnt/ttcmap0.c (tt_face_build_cmaps): removed compiler warnings
in optimized mode relative to the "volatile" local variables. This was
not a compiler bug after all, but the fact that a pointer to a volatile
variable is not the same than a volatile pointer to a variable :-)
the fix was to change "volatile FT_Byte* p"
into "FT_Byte* volatile p"
* src/pfr/pfrload.c, src/pfr/pfrdrivr.c, src/gzip/inftrees.c: removed
compiler warnings in optimized modes
* src/gzip/*.[hc]: modified our ZLib copy in order to prevent exporting
any zlib function names outside of the component. This prevents linking
problems on some platforms, when applications want to link FreeType
_and_ ZLib together.
2002-11-05 Juliusz <jch@pps.jussieu.fr>
* src/psaux/psobjs.c (ps_table_add): modified increment loop in
order to implement exponential behaviour
src/pfr/pfrgload.c, src/pfr/pfrobjs.c, src/pfr/pfrtypes.h,
Jamfile, src/base/ftobjs.c: adding support for embedded bitmaps to
the PFR driver, and rewriting its kerning loader / handler to use all
kerning pairs in a physical font (and not just the first item).
* src/tools/docmaker/content.py, src/tools/docmaker/sources.py,
src/tools/docmaker/tohtml.py: fixing a few nasty bugs
* src/sfnt/ttcmap0.c: the validator for format 4 sub-tables is
now capable of dealing with invalid "length" fields at the start
of the sub-table. This allows fonts like "mg______.ttf" (i.e.
Marriage) to return accurate charmaps.
Update all callers.
(TRUNC): Add cast to `TCoord'.
Update all callers.
(TRaster): Use `TPos' for min_ex, max_ex, min_ey, max_ey, and
last_ey.
Update all casts.
(gray_render_line): Fix casts for `p' and `first'.
tt_face_get_ps_name): Replace switch statement with if clauses to
make it more portable.
* src/cff/cffobjs.c (cff_face_init): Ditto.
* include/freetype/ftmodule.h (FT_Module_Class): Use `FT_Long' for
`module_size'.
* include/freetype/ftrender.h (FT_Glyph_Class_): Use `FT_Long' for
`glyph_size'.
* src/base/ftobjs.c (FT_Render_Glyph): Change second parameter to
`FT_Render_Mode'.
(FT_Render_Glyph_Internal): Change third parameter to
`FT_Render_Mode'.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Change second parameter
to `FT_Render_Mode'.
* src/raster/ftrend1.c (ft_raster1_render): Change third parameter
to `FT_Render_Mode'.
* src/smooth/ftsmooth.c (ft_smooth_render, ft_smooth_render_lcd,
ft_smooth_render_lcd_v): Ditto.
(ft_smooth_render_generic): Change third and fifth parameter to
`FT_Render_Mode'.
* include/freetype/freetype.h, include/freetype/internal/ftobjs.h,
include/freetype/ftglyph.h: Updated.
* src/cff/cffdrivr.c (Load_Glyph), src/pcf/pcfdriver.c
(PCF_Glyph_Load), src/pfr/pfrobjs.c (pfr_slot_load),
src/winfonts/winfnt.c (FNT_Load_Glyph), src/t42/t42objs.c
(T42_GlyphSlot_Load), src/bdf/bdfdrivr.c (BDF_Glyph_Load): Change
fourth parameter to `FT_Int32'.
* src/pfr/pfrobjs.c (pfr_face_init): Add two missing parameters
and declare them as unused.
* src/cid/cidparse.h (CID_Parser): Use FT_Long for `postscript_len'.
* src/psnames/psnames.h (PS_Unicode_Value_Func): Change return
value to FT_UInt32.
* src/psnames/psmodule.c (ps_unicode_value, ps_build_unicode_table):
Updated accordingly.
* src/cff/cffdrivr.c (Get_Kerning): Use FT_Long for `middle'.
(cff_get_glyph_name): Use cast for result of ft_strlen.
* src/cff/cffparse.c (cff_parse_real): User cast for assigning
`exp'.
* src/cff/cffload.c (cff_index_get_pointers): Use FT_ULong for
some local variables.
(cff_charset_load, cff_encoding_load): Use casts to FT_UInt for some
switch statements.
(cff_font_load): Use cast in call to CFF_Load_FD_Select.
* src/cff/cffobjs.c (cff_size_init): Use more casts.
(cff_face_init): Use FT_Int32 for `flags'.
* src/cff/cffgload.c (cff_operator_seac): Use cast for assigning
`adx' and `ady'.
(cff_decoder_parse_charstrings): Use FT_ULong for third parameter.
Use more casts.
* src/cff/cffcmap.c (cff_cmap_unicode_init): Use cast for `count'.
* src/cid/cidload.c (cid_read_subrs): Use FT_ULong for `len'.
* src/cid/cidgload.c (cid_load_glyph): Add missing cast for
`cid_get_offset'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings) <18>: Use
cast for `num_points'.
(t1_decoder_init): Use cast for assigning `decoder->num_glyphs'.
* src/base/ftdebug.c (ft_debug_init): Use FT_Int.
* include/freetype/internal/ftdriver.h (FT_Slot_LoadFunc): Use
`FT_Int32' for fourth parameter.
* src/base/ftobjs.c (open_face): Use cast for calling
clazz->init_face.
* src/raster/ftraster.c (Set_High_Precision): Use `1' instead of
`1L'.
(Finalize_Profile_Table, Line_Up, ft_black_init): Use casts.
* src/raster/ftrend1.c (ft_raster1_render): Ditto.
* src/sfnt/sfnt_dir_check: Compare `magic' with unsigned long
constant.
* builds/amiga/include/freetype/config/ftmodule.h: Updated.
* src/autohint/ahtypes.h: disabling metrics hinting in the auto-hinter.
this produces much better anti-aliased text
2002-09-25 Anthony Fok <anthony@thizlinux.com>
* src/sfnt/ttcmap0.c: added support for opens___.ttf (it contains
a charmap that uses offset=0xFFFFU instead of 0x0000 to indicate a
missing glyph)
* src/autohint/ahglobal.c (sort_values): Use FT_Pos for `swap'.
(ah_hinter_compute_widths): Use FT_Pos for `dist'.
Use AH_MAX_WIDTHS.
* src/autohint/ahglyph.c (ah_outline_scale_blue_edges): Use FT_Pos
for `delta'.
(ah_outline_compute_edges): Replace some ints with FT_Int and
FT_Pos.
(ah_test_extrema): Clean up code.
(ah_get_orientation): Use 4 FT_Int variables instead of FT_BBox to
hold indices.
* src/autohint/ahtypes.h (AH_SegmentRec): Change type of `score'
to FT_Pos.
include/freetype/ftstroker.h, include/freetype/ftsysio.h,
include/freetype/ftsysmem.h, include/freetype/ttnameid.h:
updating the in-source documentation
* src/tools/docmaker/tohtml.py: updating the HTML formatter in the
DocMaker tool
* src/tools/docmaker.py: removing obsolete file
* src/type1/t1parse.h (T1_ParserRec): Change type of `base_len'
and `private_len' to FT_Long.
* src/type1/t1parse.c (T1_Get_Private_Dict): Remove cast for
`private_len'.
* src/type1/t1load.c: Use FT_Int cast for most calls of T1_ToInt.
Use FT_PtrDist where appropriate.
(parse_encoding): Use FT_Long for `count' and `n'.
(read_binary_data): Use FT_Long* for second parameter.
* src/type1/t1afm.c (afm_atoindex): Use FT_PtrDist.
* src/cache/ftcsbits.c (ftc_sbit_node_load): Remove unused label.
* src/pshinter/pshalgo3.c (psh3_hint_align): Remove unused variable.
Werner Lemberg