Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
Pass dropout rules from the TT bytecode interpreter to the
rasterizer; temporarily this is enabled only if
`USE_SCAN_CONVERSION_RULES' is defined.
* include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS,
FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the
OpenType specification.
Fix mode 4 computation.
(Render_Glyph, Render_Gray_Glyph): Handle new outline flags.
* src/truetype/ttgload.c (TT_Load_Glyph)
[USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to
FT_OUTLINE_XXX flags.
* src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
boundary markers.
* src/tools/docmaker/content.py (re_field): Allow `.' in field names
(but not at the beginning or end).
* include/freetype/*: Many minor documentation improvements (adding
links, spelling errors, etc.).
* include/freetype/*: s/scale/scaling value/ where appropriate.
Many other minor documentation improvements.
* src/tools/docmaker/sources.py (re_italic, re_bold): Handle
trailing punctuation.
* src/tools/docmaker/tohtml.py (HtmlFormatter::make_html_word): Add
warning message for undefined cross references.
Update handling of re_italic and re_bold.
halved.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Change the default
strength.
Don't increase slot->advance.y.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 2.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.ac (version_info): Set to 9:9:3.
Currently, we are still binary compatible.
* builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj: s/219/2110/, s/2.1.9/2.1.10/.
* builds/freetype.mk (refdoc), README, Jamfile (RefDoc):
s/2.1.9/2.1.10/.
* docs/CHANGES, docs/VERSION.DLL: Updated.
* ChangeLog: Split off older entries into...
* ChangeLog.20, ChangeLog.21: These new files.
The next release will be 2.2.0, so don't worry about source code
backwards compatibility.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineToFunc, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc, FT_SpanFunc, FT_Raster_RenderFunc),
include/freetype/ftrender.h (FT_Glyph_TransformFunc,
FT_Renderer_RenderFunc, FT_Renderer_TransformFunc): Decorate
parameters with `const' where appropriate.
* src/sfnt/ttsbit.c (tt_face_load_sbit_image): Compute vertBearingY
to make glyphs centered vertically.
* src/truetype/ttgload.c (compute_glyph_metrics): Compute
vertBearingY to make glyphs centered vertically.
Fix some bugs in vertical metrics:
. loader->pp3.y and loader->pp4.y are in 26.6 format, not in font
units.
. As we use the glyph's cbox to calculate the top bearing now
there iss no need to adjust `top'.
* src/otvalid/otvcommn.h (OTV_OPTIONAL_TABLE): Use FT_UShort to be
in sync with OTV_OPTIONAL_OFFSET. Reported by YAMATO Masatake.
* docs/release: Update.
Exclude debug info for `Release' versions to reduce library size.
* src/base/ftobjs.c (FT_Open_Face): Make it work as documented, this
is, ignore `aface' completely if face_index < 0. Reported by David
Osborn <spam@habitualhiatus.com>.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineTo_Func, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc), src/smooth/ftgrays.c (gray_render_conic,
gray_render_cubic, gray_move_to, gray_line_to, gray_conic_to,
gray_cubic_to, gray_render_span, gray_sweep): Decorate parameters
with `const' where appropriate.
(unfinished) `otlayout' module but has been heavily modified to make
it much more compact.
* src/otvalid/*: New module.
* include/freetype/ftotval.h, src/base/ftotval.c,
include/freetype/internal/services/svotval.h: New files.
* include/freetype/config/ftmodule.h: Add otv_module_class.
* include/freetype/config/ftheader.h (FT_OPENTYPE_VALIDATE_H): New
macro.
* include/freetype/internal/ftserv.h
(FT_SERVICE_OPENTYPE_VALIDATE_H): New macro.
* include/freetype/internal/fttrace.h (otvmodule, otvcommon,
otvbase, otvgdef, otvgpos, otvgsub, otvjstf): New trace components.
* include/freetype/ftchapters.h: Updated.
* src/base/Jamfile (Library), src/base/descrip.mms (OBJS),
src/base/rules.mk (BASE_EXT_SRC): Updated.
* docs/CHANGES: Updated.
=========================
* builds/unix/ft2unix.h: Fix comments.
* builds/unix/ftconfig.in: Synchronized with ANSI version.
Use `#undef' in templates as recommended in the autoconf
documentation.
Since real `#undef' lines don't survive during configuration, use
`/undef' instead; the postprocessing facility of the
AC_CONFIG_HEADERS autoconf macro converts them to `#undef'.
* builds/unix/install.mk (install): Install Unix version of
`ftconfig.h'.
* builds/unix/unix-cc.in (CFLAGS): Set FT_CONFIG_CONFIG_H macro
to include the correct `ftconfig.h' file.
* builds/unix/ft-munmap.m4 (FT_MUNMAP_DECL): Removed.
(FT_MUNMAP_PARAM): Updated syntax to autoconf 2.59.
* builds/unix/freetype2.m4: Updated syntax to autoconf 2.59.
* builds/unix/configure.ac: Use AC_CONFIG_HEADERS instead of
AC_CONFIG_HEADER to create ftconfig.h, and use second argument
to replace `/undef' with `#undef'.
Don't use FT_MUNMAP_DECL but AC_CHECK_DECLS to check for munmap.
Use AS_HELP_STRING in AC_ARG_WITH.
Update syntax to autoconf 2.59.
* builds/unix/ltmain.sh: Regenerated with `libtoolize --force
--copy' from libtool 1.5.
* builds/unix/aclocal.m4: Regenerated with `aclocal -I .' from
automake 1.7.8.
* builds/unix/configure: Regenerated with autoconf 2.59.
* builds/unix/config.guess, builds/unix/config.sub: Updated from
`config' CVS module at subversions.gnu.org
* builds/unix/install-sh, builds/unix/mkinstalldirs: Updated from
`texinfo' CVS module at subversions.gnu.org.
* builds/vms/ftconfig.h: Synchronized with ANSI version.
* docs/CUSTOMIZE: Fix documentation error.
* docs/CHANGES, docs/VERSION.DLL, docs/release: Updated.
* builds/freetype.mk (refdoc): Updated --title.
include/freetype/freetype.h (FT_Bitmap_Size): `height' is now
defined to return the baseline-to-baseline distance. This was
already the value returned by the BDF and PCF drivers.
The `width' field now gives the average width. I wasn't able to
find something better. It should be taken as informative only.
New fields `size', `x_ppem', and `y_ppem'.
* src/pcf/pcfread.c (pcf_load_font): Updated to properly fill
FT_Bitmap_Size.
Do proper rounding and conversion from 72.27 to 72 points.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Updated to properly fill
FT_Bitmap_Size.
Do proper rounding and conversion from 72.27 to 72 points.
* src/sfnt/sfobjs.c (sfnt_load_face): Updated to properly fill
FT_Bitmap_Size.
* src/winfonts/winfnt.c (FNT_Face_Init): Updated to properly fill
FT_Bitmap_Size.
Redesigning the FNT driver to return multiple faces, not multiple
strikes. At least one font (app850.fon from WinME) contains
different FNT charmaps for its subfonts. Consequently, the previous
design of having multiple bitmap strikes in a single font face fails
since we have only one charmap per face.
* include/freetype/internal/fnttypes.h (FNT_Size_Rec): Removed.
(FNT_FaceRec): Remove `num_fonts' field and replace `fonts' with
`font'.
* src/base/ftwinfnt.c (FT_Get_WinFNT_Header): Updated.
* src/winfonts/winfnt.c (fnt_font_load): Don't set pixel_width equal
to pixel_height.
(fnt_face_done_fonts): Removed.
(fnt_face_get_dll_fonts): Renamed to...
(fnt_face_get_dll_font): This. Add second function argument to
select face index.
Updated to load just one subfont.
(fnt_font_done, FNT_Face_Done): Updated.
(FNT_Face_Init): Handle `face_index'.
Updated.
(FNT_Size_Set_Pixels): Simplified; similar to BDF and PCF, the
bitmap width is now ignored.
(FNT_Load_Glyph): Updated.
Fix glyph index computation.
(winfnt_driver_class): Updated.
#defines for the constants.
(FT_Open_Args): Change type of `flags' to FT_UInt.
(FT_GlyphSlot): Move `flags' to FT_Slot_Internal.
* include/freetype/ftimage.h (FT_Outline_Flags, FT_Raster_Flag):
Replaced with #defines for the constants.
* include/freetype/internal/ftobjs.h (FT_Slot_Internal): New
field `flags' (from FT_GlyphSlot).
Updated all affected source files.
(FT_GLYPH_OWN_BITMAP): New macro (from ftgloadr.h).
* include/freetype/internal/ftgloadr.h (FT_GLYPH_OWN_BITMAP): Moved
to ftobjs.h.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Use dummy
FT_GlyphSlot_Internal object.
include/freetype/ftstroker.h, include/freetype/ftsysio.h,
include/freetype/ftsysmem.h, include/freetype/ttnameid.h:
updating the in-source documentation
* src/tools/docmaker/tohtml.py: updating the HTML formatter in the
DocMaker tool
* src/tools/docmaker.py: removing obsolete file
debug mode of template instantiation
* src/cff/cffparse.c: fixed the CFF table loader. It didn't accept
empty arrays, and this prevented the loading of certain fonts.
* src/pshinter/pshalgo2.c, src/pshinter/pshalgo3.c: adding fix to
prevent seg fault when hints are provided in an empty glyph !!
* include/freetype/ftimage.h: removed incorrect "zft_" definitions
and updated constants documentation comments
* include/freetype/freetype.h (FT_FaceRec): updating documentation
comment. The "descender" value is always *negative*, not positive !
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
Werner Lemberg