See Savannah bug #30975.
* src/cff/cffload.c (cff_charset_compute_cids): Don't increment
max_cid after detecting max CID. The array CFF_Charset->cids
is allocated by max_cid + 1.
(cff_charset_cid_to_gindex): Permit CID is less than or equal
to CFF_Charset->max_cid.
* src/cff/cffobjs.c (cff_face_init): FT_Face->num_glyphs is
calculated as CFF_Charset->max_cid + 1.
* src/truetype/ttpload.c (tt_face_get_location): If `pos1', the
offset to the requested entry in `glyf' exceeds the end of the
table, return offset=0, length=0. If `pos2', the offset to the
next entry in `glyf' exceeds the end of the table, truncate
the entry length at the end of `glyf' table.
See Savannah bug #31040.
* src/sfnt/ttpost.c (load_post_names): Get the length of
`post' table and pass the limit of `post' table to
load_format_20() and load_format_25().
(load_format_20): Stop the parsing when we reached at the
limit of `post' table. If more glyph names are required,
they are filled by NULL names. See Savannah bug #31040.
* src/truetype/ttinterp.c (free_buffer_in_size): Don't duplicate
FT_GlyphZoneRec size->twilight to be freed. If duplicated,
FT_FREE() erases the duplicated pointers only and leave original
pointers. They can cause the double-free crash when the burst
errors occur in TrueType interpreter and free_buffer_in_size()
is invoked repeatedly. See Savannah bug #31040 for detail.
Patch is suggested by Adrian Bunk, to prevent unexpected
reflection of environmental LIBTOOL. See:
http://savannah.nongnu.org/patch/?7290
* builds/unix/unix-cc.in: LIBTOOL is unconditionally set to
$(FT_LIBTOOL_DIR)/libtool. FT_LIBTOOL_DIR is set to $(BUILD_DIR)
by default.
* configure: When configured for the building out of source tee,
FT_LIBTOOL_DIR is set to $(OBJ_DIR).
* src/truetype/ttinterp.c (TT_RunIns): Decrease the trace level
showing the error when the interpreter returns with an error,
from FT_TRACE7() to FT_TRACE1().
* src/truetype/ttinterp.c (free_buffer_in_size): New function to
free the buffer allocated during the interpretation of this glyph.
(TT_RunIns): Unset FT_Face->size->{cvt_ready,bytecode_ready} if
an error occurs in the bytecode interpretation. The interpretation
of invalid bytecode may break the function definitions and referring
them in later interpretation is danger. By unsetting these flags,
`fpgm' and `prep' tables are executed again in next interpretation.
Fix Savannah bug #30798, reported by Robert Swiecki.
* src/cff/cffload.c (cff_charset_load): Fix change from 2009-03-20:
The threshold for SIDs is not applicable here. I misinterpreted the
`SID values 65000 and above are available for implementation use'
sentence in the CFF specification.
Problem reported by Ivan Ninčić <inincic@pdftron.com>.
=========================
Tag sources with `VER-2-4-2'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.2
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.1/2.4.2/, s/241/242/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 2.
* builds/unix/configure.raw (version_info): Set to 12:0:6.
* src/base/ftobjs.c (FT_Done_Library): Specify the order of font
drivers in face closing process. Type42 faces should be closed
before TrueType faces, because a Type42 face refers another
internal TrueType face which is created from sfnt[] array on the
memory.
* src/truetype/ttinterp.c (BOUNDSL): New macro.
Change `BOUNDS' to `BOUNDSL' where appropriate.
* src/truetype/ttinterp.h (TT_ExecContextRec): Fix type of
`cvtSize'.
=========================
Tag sources with `VER-2-4-1'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.1.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.0/2.4.1/, s/240/241/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 1.
* builds/unix/configure.raw (version_info): Set to 11:1:5.
Problem reported by Tobias Wolf <towolf@gmail.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: Sigh. I'm apparently too silly to fix this
correctly in less than three tries.
=========================
Tag sources with `VER-2-4-0'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.0.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.3.12/2.4.0/, s/2312/240/.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 4.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.raw (version_info): Set to 11:0:5.
Permit a face for Type1, Type42 and CFF without charmap,
patch by Tor Andersson.
* src/type1/t1objs.c (T1_Face_Init): Reset the error if it
is FT_Err_No_Unicode_Glyph_Name.
* src/type42/t42objs.c (T42_Face_Init): Ditto.
* src/cff/cffobjs.c (cff_face_init): Ditto.
Too serious check of errors by `FT_CMap_New' since 2010-07-04
is fixed. Reported by Tor Andersson.
* include/freetype/fterrdef.h
(PSnames_Err_No_Unicode_Glyph_Name): New error code to
indicate the Unicode charmap synthesis failed because
no Unicode glyph name is found.
* src/psnames/psmodule.c (ps_unicodes_init): Return
PSnames_Err_No_Unicode_Glyph_Name when no Unicode glyph name
is found in the font.
* src/cff/cffcmap.c (cff_cmap_unicode_init): Return
CFF_Err_No_Unicode_Glyph_Name when no SID is available.
* src/type1/t1objs.c (T1_Face_Init): Proceed if `FT_CMap_New'
is failed by the lack of Unicode glyph name.
* src/type42/t42objs.c (T42_Face_Init): Ditto.
* src/cff/cffobjs.c (cff_face_init): Ditto.
Problem reported by malc <av1474@comtv.ru>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: It is possible that there is just a single byte
after the `hintmask' or `cntrmask', e.g., a `return' instruction.
Fix for Savannah bug #30059.
* src/cache/ftccmap.c (FTC_CMapCache_Lookup): Replace `16' the
minimum character code passed by a legacy rogue client by...
* include/freetype/config/ftoption.h (FT_MAX_CHARMAP_CACHEABLE):
This. It is undefined when FT_CONFIG_OPTION_OLD_INTERNALS is
undefined (thus the rogue client compatibility is not required).
* src/cff/cffobjs.c (cff_face_init): Abort the automatic
selection or synthesis of Unicode cmap subtable when the charmap
index exceeds FT_MAX_CHARMAP_CACHEABLE.
* src/sfnt/ttcmap.c (tt_face_build_cmaps): Issue error message
when the charmap index exceeds FT_MAX_CHARMAP_CACHEABLE.
* src/base/ftobjs.c (find_unicode_charmap): When Unicode charmap
is found after FT_MAX_CHARMAP_CACHEABLE, ignore it and search
earlier one.
(find_variant_selector_charmap): When UVS charmap is found after
FT_MAX_CHARMAP_CACHEABLE, ignore it and search earlier one.
(FT_Select_Charmap): When a charmap matching with requested
encoding but after FT_MAX_CHARMAP_CACHEABLE, ignore and search
earlier one.
(FT_Set_Charmap): When a charmap matching with requested
charmap but after FT_MAX_CHARMAP_CACHEABLE, ignore and search
earlier one.
(FT_Get_Charmap_Index): When a requested charmap is found
after FT_MAX_CHARMAP_CACHEABLE, return the inverted charmap
index.
* src/base/ftobjs.c (Mac_Read_POST_Resource): If the type
of the POST fragment is 0, the segment is completely ignored.
The declared length of the segment is not cared at all.
According to Adobe Technical Note 5040, type 0 segment is
comment only and should not be loaded for the interpreter.
Reported by Robert Swiecki.
* src/base/ftobjs.c (Mac_Read_POST_Resource): Check `rlen'
the length of fragment declared in the POST fragment header
and prevent an underflow in length calculation. Some fonts
set the length to zero in spite of the exist of following
16bit `type'. Reported by Robert Swiecki.
* src/base/ftobjs.c (Mac_Read_POST_Resource): Check the buffer
size during gathering PFB fragments embedded in LaserWriter PS
font for Macintosh. Reported by Robert Swiecki.
* src/smooth/ftgrays.c (gray_render_span): Use cast to `unsigned
int' to avoid integer overflow.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Use smaller
threshold values for `width' and `height'. This is not directly
related to the bug fix but makes sense anyway.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: Ensure that we don't exceed `limit' while parsing
the bit masks of the `hintmask' and `cntrmask' operators.
* src/base/ftstream.c (FT_Stream_EnterFrame): Exit with error
if the frame size is larger than the stream size.
* src/base/ftsystem.c (ft_ansi_stream_io): Exit with error if
seeking a position larger than the stream size.
* src/base/ftobjs.c (Mac_Read_POST_Resource): Check the error during
reading a PFB fragment embedded in LaserWriter PS font for Macintosh.
Reported by Robert Swiecki.
* src/bdf/bdflib.c (_bdf_readstream): Use special error code to
indicate a redo operation.
(_bdf_parse_start): Handle `CHARS' keyword here too and pass current
input line to `_bdf_parse_glyph'.
* include/freetype/fterrdef.h
(BDF_Err_Missing_Fontboundingbox_Field): New error code.
* src/bdf/bdflib.c (_bdf_parse_start): Check for missing
`FONTBOUNDINGBOX' field.
Avoid memory leak if there are multiple `FONT' lines (which is
invalid but doesn't hurt).
Point numbers for FreeType's implementation of hinting masks are
collected before the final number of points of a glyph has been
determined; in particular, the code for handling the `endchar'
opcode can reduce the number of points.
* src/pshinter/pshalgo.c (psh_glyph_find_strong_points): Assure that
`end_point' is not larger than `glyph->num_points'.
This bug has been introduced with commit 2415cbf3.
* src/base/ftobjs.c (FT_Get_First_Char, FT_Get_Next_Char): Protect
against endless loop in case of corrupted font header data.
Suggested by Graham.
* src/autofit/afhints.c (af_glyph_hints_compute_inflections):
Removed.
(af_glyph_hints_reload): Remove third argument.
Update all callers.
Acroread does the same.
* src/truetype/ttgload.c (TT_Process_Composite_Glyph): Call
`Update_Max' to adjust size of instructions array if necessary and
add a rough safety check.
(load_truetype_glyph): Save `loader->byte_len' before recursive
call.
* src/truetype/ttinterp.h, src/truetype/ttinterp.c (Update_Max):
Declare it as FT_LOCAL.
Previously we discovered fonts which used `setcurrentpoint' to set
the initial point of a contour to 0,0. This caused FreeType to
raise an error, because the `setcurrentpoint' operator is only
supposed to be used with the results from an OtherSubr subroutine.
This was fixed by simply ignoring the error and carrying on.
Now we have found a font which uses setcurrentpoint to actually
establish a non-zero point for a contour during the course of a
glyph program. FWIW, these files may be produced by an application
called `Intaglio' on the Mac, when converting TrueType fonts to
Type 1.
The fix allows the new invalid behaviour, the old invalid behaviour
and real proper usage of the operator to work the same way as Adobe
interpreters apparently do.
(t1_decoder_parse_charstrings): Make `setcurrentpoint' use the top
two elements of the stack to establish unconditionally the current x
and y coordinates.
Make the `flex' subroutine handling (OtherSubr 0) put the current
x,y coordinates onto the stack, instead of two dummy uninitialised
values.
This is based on code written by Lifter
<http://unixforum.org/index.php?showuser=11691>. It fixes
FreeDesktop bug #27386.
* src/base/ftlcdfil.c (FT_Library_SetLcdFilterWeights): New
function.
* include/freetype/ftlcdfil.h: Updated.
* docs/CHANGES: Updated.
We do this by avoiding memory allocation and file I/O. This is
Savannah patch #7104.
* src/cff/cfftypes.h: Include PS cmaps service and
FT_INTERNAL_POSTSCRIPT_HINTS_H.
(CFF_SubFontRec): Remove `num_local_subrs'.
(CFF_FontRec): Add `num_strings', `strings', and `string_pool'
fields.
Remove `string_index' and `num_global_subrs' fields.
Use real types instead of `void' for `pshinter' and `psnames' fields.
* src/cff/cffload.c: Don't include PS cmaps service.
(cff_index_get_pointers): Add `pool' parameter which allows to
insert an extra NUL character for each String INDEX entry.
(cff_index_get_name): Make it a local function.
(cff_index_get_string): New function.
(cff_subfont_load): Updated.
(cff_font_load): Initialize `num_strings', `strings', and
`string_pool' fields in the `CFF_FontRec' structure.
(cff_index_get_sid_string): Use `cff_index_get_string' instead of
`cff_index_get_name'.
(cff_font_done): Updated.
* src/cff/cffload.h: Don't include PS cmaps service.
(cff_index_get_string): Added.
(cff_index_get_sid_string): Updated.
* src/cff/cffobjs.c: Don't include PS cmaps service and
FT_INTERNAL_POSTSCRIPT_HINTS_H.
(cff_size_get_globals_funcs, cff_slot_init): Updated.
(cff_face_init): Follow `cff_index_get_name',
`cff_index_get_string', and `cff_index_get_sid_string' changes.
* src/cff/cffcmap.c (cff_sid_free_glyph_name): Removed.
(cff_sid_to_glyph_name): Use `cff_index_get_cid_string'.
(cff_cmap_unicode_init): Updated.
* src/cff/cffdrivr.c: Don't include PS cmap service.
(cff_get_glyph_name): Avoid unnecessary lookup for POSTSCRIPT_CMAPS
service.
(cff_get_glyph_name, cff_ps_get_font_info, cff_get_ros): Follow API
`cff_index_get_sid_string' change.
(cff_get_name_index): Use `cff_index_get_string' instead of
`cff_index_get_name'.
* src/cff/cffgload.c: Don't include FT_INTERNAL_POSTSCRIPT_HINTS_H.
(cff_decoder_init, cff_decoder_prepare): Updated.
Initialize phantom points before calling the incremental interface
to update glyph metrics.
* src/truetype/ttgload.c (tt_get_metrics_incr_overrides)
[FT_CONFIG_OPTION_INCREMENTAL]: New function, split off from...
(tt_get_metrics): This.
Updated.
(load_truetype_glyph): Use tt_get_metrics_incr_overrides.
==========================
Tag sources with `VER-2-3-12'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.12.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.3.11/2.3.12/, s/2311/2312/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 12.
* builds/unix/configure.raw (version_info): Set to 10:0:4.
Since we consider `sbw' for the horizontal direction only, we still have
to synthesize vertical metrics if the user wants to use the vertical
writing direction.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph):
Synthesize vertical metrics (only) if FT_LOAD_VERTICAL_LAYOUT is
set.
After long discussion, we now consider the character width vector
(wx,wy) returned by the `sbw' Type 1 operator as being part of *one*
direction only. For example, if you are using the horizontal
writing direction, you get the horizontal and vertical components of
the advance width for this direction. Note that OpenType and CFF fonts
don't have such a vertical component; instead, the GPOS table can be
used to generate two-dimensional advance widths (but this isn't
handled by FreeType).
* include/freetype/ftincrem.h (FT_Incremental_MetricsRec): Add
`advance_v' field to hold the vertical component of the advance
value.
* src/truetype/ttgload.c (tt_get_metrics), src/cff/cffgload.c
(cff_slot_load), src/type1/t1gload.c
(T1_Parse_Glyph_And_Get_Char_String), src/cid/cidgload.c
(cid_load_glyph): Use it.
Issue #28226 involved a work-around for a font which used the
`setcurrentpoint' operator in an invalid way; this operator is only
supposed to be used with the result of OtherSubrs, and the font used
it directly. The supplied patch removed the block of code which
checked this usage entirely.
This turns out to be a Bad Thing. If `setcurrentpoint' is being
used correctly it should reset the flex flag in the decoder. If we
don't do this then the flag never gets reset and we omit any further
contours from the glyph (at least until we close the path or
similar).
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
<op_setcurrentpoint>: Handle `flex_state' correctly.
Ghostscript requires the incremental font interface for handling
some Postscript documents. It is moving to using FreeType as its
primary renderer; supporting this in the default build makes it
Ghostscript to be linked against the system FreeType when one is
available.
* include/freetype/config/ftoption.h (FT_CONFIG_OPTION_INCREMENTAL):
Uncomment.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap) [FT_CONFIG_OPTION_PIC]:
Declare `library' for FT_BITMAP_GLYPH_CLASS_GET.
* src/base/ftinit.c (ft_destroy_default_module_classes,
ft_create_default_module_classes): Use proper casts (needed for C++
compilation).
* src/sfnt/ttcmap.c (tt_cmap13_class_rec): Use FT_DEFINE_TT_CMAP.
Reported by Sean.
* src/base/ftdbgmem.c [!FT_DEBUG_MEMORY]: ANSI C doesn't like empty
source files; however, some compilers warn about an unused variable
declaration. This is now replaced with a typedef.
There exist corrupt, subsetted fonts (embedded in PDF files) which
contain a private dict that ends with an unterminated floating point
number (no operator following). We now ignore this error (as
acrobat does).
* src/cff/cffparse.c (cff_parser_run): Don't emit a syntax error for
unterminated floating point numbers.
This fixes Savannah bug #28226.
At least two wild PostScript files of unknown provenance contain
Type 1 fonts, apparently converted from TrueType fonts in earlier
PDF versions of the files, which use the `setcurrentpoint' operator
inappropriately.
FreeType currently throws an error in this case, but Ghostscript and
Adobe Distiller both accept the fonts and ignore the problem. This
commit #ifdefs out the check so PostScript interpreters using
FreeType can render these files.
The specification says `setcurrentpoint' should only be used to set
the point after a `Subr' call, but these fonts use it to set the
initial point to (0,0). Unnecessarily so, as they correctly use an
`hsbw' operation which implicitly sets the initial point.
Reported by Sean McBride <sean@rogue-research.com>.
* src/tools/apinames.c (read_header_file)<STATE_TYPE>: Use a cast to
`int', as specified in the printf(3) man page.
* src/cff/cffobjs.c (cff_face_init), src/cid/cidobjs.c
(cid_face_init), src/type1/t1afm.c (T1_Read_Metrics),
src/type1/t1objs.c (T1_Face_Init): Don't use unsigned constant
values for rounding if the argument can be negative.
* src/cff/cffgload.c (CFF_Operator, cff_argument_counts): Handle
`seac', `sbw', and `setcurrentpoint' opcodes.
(cff_compute_bias): Add parameter to indicate the charstring type.
Update all callers.
(cff_operator_seac): Add parameter for side bearing.
(cff_decoder_parse_charstrings): Updated for more Type1 support.
Reported by Jeremy Manson <jeremy.manson@gmail.com>.
src/truetype/ttgload.c (load_truetype_glyph): Add parameter to
quickly load the glyph header only.
Update all callers.
(tt_loader_init): Add parameter to quickly load the `glyf' table
only.
Update all callers.
(TT_Load_Glyph): Compute linear advance values for embedded bitmap
glyphs too.
* src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_get,
cff_op_put>: Appendix B of Adobe Technote #5177 limits the number of
elements for the `get' and `put' operators to 32.
* src/cff/cffgload.h (CFF_MAX_TRANS_ELEMENTS): Define.
(CFF_Decoder): Use it for `buildchar' and remove `len_buildchar'.
Problem and solution reported by Ning Dong <flintning@163.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_dup>:
Increase `args' by 2, not 1.
==========================
Tag sources with `VER-2-3-11'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.11.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.10/2.3.11/, s/2310/2311/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 11.
* builds/unix/configure.raw (version_info): Set to 9:22:3.
==========================
Tag sources with `VER-2-3-10'.
* builds/toplevel.mk (major, minor, patch): Fix regexp to allow more
than a single digit.
(dist): We now use git.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.10.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.9/2.3.10/, s/239/2310/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 10.
* builds/unix/configure.raw (version_info): Set to 9:21:3.
This was broken since version 2.3.0.
* src/raster/ftraster.c (count_table): Use pre-2.3.0 values (which
were then computed dynamically).
(Vertical_Gray_Sweep_Step): Updated.
(ft_black_render): Initialize `worker->gray_lines' (problem found by
valgrind).
(FT_RASTER_OPTION_ANTI_ALIASING, DEBUG_RASTER): Dont' #undef, just
comment out.
The calculation of `vertBearingX' is not defined in the OTF font
spec so FreeType does a `best effort' attempt. However, this value
is defined in the PDF and PostScript specs, and that algorithm is
better than the one FreeType currently uses:
FreeType: Use the middle of the bounding box as the X coordinate
of the vertical origin.
Adobe PDF spec: Use the middle of the horizontal advance vector as
the X coordinate of the vertical origin.
FreeType's algorithm goes wrong if you have a really small glyph
(like the full-width, circle-like dot at the end of the sentence, as
used in CJK scripts) with large bearings. With the FreeType
algorithm this dot gets centered on the baseline; with the PDF
algorithm it gets the correct location (in the top right). Note
that this is a serious issue, it's like printing the dot at the end
of a Roman sentence at the center of the textline instead of on the
baseline like it should. So i believe the PDF spec's algorithm
should be used in FreeType as well.
The `vertBearingY' value for such small glyphs is also very strange
if no `vmtx' information is present, since the height of the bbox is
not representable for the height of the glyph visually (the
whitespace up to the baseline is part of the glyph). The fix also
includes some code for a better estimate of `vertBearingY'.
* src/base/ftobjs.c (ft_synthesize_vertical_metrics): `vertBearingX'
is now calculated as described by the Adobe PDF Spec. Estimate for
`vertBearingY' now works better for small glyphs completely above or
below the baseline into account.
* src/cff/cffgload.c (cff_slot_load): `vertBearingX' is now
calculated as described by the Adobe PDF Spec. Vertical metrics
information was always ignored when FT_CONFIG_OPTION_OLD_INTERNALS
was not defined.
* src/truetype/ttgload.c (compute_glyph_metrics): `vertBearingX' is
now calculated as described by the Adobe PDF Spec.
* include/freetype/internal/t1types.h (T1_EncodingRecRec_): Update
comment to reflect revised code_last meaning.
* src/type1/t1load.c (T1_Open_Face), src/type42/t42objs.c
(T42_Open_Face): Assign max_char as highest character code + 1 and
use this for T1_EncodingRecRec_::code_last.
* src/psaux/t1cmap.c (t1_cmap_custom_init): Follow revised
T1_EncodingRecRec_::code_last meaning.
Bug reported by Ivan Nincic <inincic@pdftron.com>.
* src/cff/cffgload.c (cff_slot_load): Thinko: Check `xx' element of
`font_matrix' also.
* docs/CHANGES: Updated.
* src/truetype/ttobjs.c (tt_size_init_bytecode): Don't reset x_ppem
and y_ppem. Otherwise the `*_CVT_Stretched' functions in ttinterp.c
get never called.
An anonymous guy suggested this change on Savannah, and it seems to
be the right solution.
This fixes Savannah bug #26867.
Previously, only integers have been used which can lead to serious
rounding errors.
However, fractional values are only used internally; after the
charstrings (of either Type 1 or 2) have been processed, the
resulting coordinates get rounded to integers currently -- before
applying scaling. This should be fixed; at the same time a new load
flag should be introduced, to be used in combination with
FT_LOAD_NO_SCALE, which indicates that font units are returned in
16.16 format. Similarly, the incremental interface should be
extended to allow fractional values for metrics.
* include/freetype/internal/psaux.h (T1_BuilderRec): Remove `shift'
field.
* include/freetype/internal/pshints.h (T1_Hints_SetStemFunc,
T1_Hints_SetStem3Func): Use FT_Fixed for coordinates.
* src/psaux/psobjs.c: Include FT_INTERNAL_CALC_H.
(t1_build_add_point): Always convert fixed to integer.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Use 16.16 format everywhere (except for large integers followed by a
`div').
[CAN_HANDLE_NON_INTEGRAL_T1_OPERANDS]: Remove #ifdef and activate
code uncoditionally.
Add support for random numbers and update remaining code
accordingly; this should work now.
(t1_operator_seac): Updated.
* src/psaux/pshrec.c: Include FT_INTERNAL_CALC_H.
(ps_hints_t1stem3, t1_hints_stem): Updated.
* src/cid/cidgload.c: Include FT_INTERNAL_CALC_H.
(cid_load_glyph) [FT_CONFIG_OPTION_INCREMENTAL],
(cid_face_compute_max_advance, cid_slot_load_glyph): Updated.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String)
[FT_CONFIG_OPTION_INCREMENTAL], (T1_Get_Advances, T1_Load_Glyph):
Updated.
* src/type1/t1load.c: Include FT_INTERNAL_CALC_H.
* src/type1/t1objs.c (T1_Face_Init): Updated.
Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
Two new constraints are introduced to better identify a `stub' -- a
concept which is only vaguely described in the OpenType
specification. The old code was too rigorous and suppressed more
pixel than it should.
. The intersection of the two profiles with the scanline is less
than a half pixel. Code related to this was already present in
the sources but has been commented out.
. The endpoint of the original contour forming a profile has a
distance (`overshoot') less than half a pixel to the scanline.
Note that the two additional conditions fix almost all differences
to the Windows rasterizer, but some problematic cases remain.
* src/raster/ftraster.c (Overshoot_Top, Overshoot_Bottom): New
macros for the `flags' field in the `TProfile' structure.
(IS_BOTTOM_OVERSHOOT, IS_TOP_OVERSHOOT): New macros.
(New_Profile, End_Profile): Pass overshoot flag as an argument and
set it accordingly.
Update callers.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop): Implement the two new
constraints.
* src/raster/ftraster.c (Set_High_Precision): Add two more bits to
the precision. This corrects rendering of some small glyphs, for
example, glyph `xi' in verdana.ttf at 13 ppem. Testing with ftbench
on my GNU/Linux box I don't see a performance degradation.
Suggested by Alexei Podtelezhnikov <apodtele@gmail.com>.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Do it.
* src/raster/ftraster.c (TFlow): Replace enumeration with...
(Flow_Up): This macro.
(TProfile): Replace `flow' member with `flags' bit field.
Update all affected code.
* src/base/ftobjs.c (FT_Load_Glyph): Alter check for permitted
matrices to allow rotations by multiples of 90°, not only unrotated,
possibly slanted matrices.
Reported by Krzysztof Kowalczyk <kkowalczyk@gmail.com>.
* src/autofit/aflatin2.c (af_latin2_hint_edges): Move declaration of
`n_edges' into `#if' block.
Reported by Krzysztof Kowalczyk <kkowalczyk@gmail.com>.
* src/pcf/pcfdrivr.c (PCF_Face_Init) [!FT_CONFIG_OPTION_USE_ZLIB]:
Make it work.
Simplify #ifdef logic.
Problem reported by Krzysztof Kotlenga <pocek@users.sf.net>.
* src/raster/raster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): For smart drop-out mode, if
intersections are equally distant relative to next pixel center,
select the left pixel, not the right one.
This fixes FreeDesktop bug #21197.
* src/autofit/afglobal.c (AF_DIGIT): New macro.
(af_face_globals_compute_script_coverage): Mark ASCII digits in
`glyph_scripts' array.
(af_face_globals_get_metrics): Updated.
(af_face_globals_is_digit): New function.
* src/autofit/afglobal.h: Updated.
(AF_ScriptMetricsRec): Add `digits_have_same_width' flag.
* src/autofit/aflatin.c: Include FT_ADVANCES_H.
(af_latin_metrics_check_digits): New function.
(af_latin_metrics_init): Use it.
* src/autofit/aflatin.h: Updated.
* src/autofit/afcjk.c (af_cjk_metrics_init): Updated.
* src/autofit/aflatin2.c: Similar changes as with aflatin.c.
* src/autofit/afloader.c (af_loader_load_g): Test digit width.
* docs/CHANGES: Document it.
Problems reported by suyu@cooee.cn.
* src/smooth/ftgrays.c (FT_DEFINE_OUTLINE_FUNCS,
FT_DEFINE_RASTER_FUNCS) [_STANDALONE_]: Define.
[!_STANDALONE_]: Include ftspic.h only here.
(ras): Define/declare after definition of `TWorker'.
Use `RAS_VAR_' where necessary.
* include/freetype/internal/autohint.h add macros to init
instances of FT_AutoHinter_ServiceRec.
* src/autofit/afmodule.h declare autofit_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/autofit/afmodule.c when FT_CONFIG_OPTION_PIC is defined
af_autofitter_service and autofit_module_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from afpic.h in order to access them.
* src/autofit/aftypes.h add macros to init and declare
instances of AF_ScriptClassRec.
* src/autofit/afcjk.h declare af_cjk_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afcjk.c when FT_CONFIG_OPTION_PIC is defined
af_cjk_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/afdummy.h declare af_dummy_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afdummy.c when FT_CONFIG_OPTION_PIC is defined
af_dummy_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/afindic.h declare af_indic_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afindic.c when FT_CONFIG_OPTION_PIC is defined
af_indic_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/aflatin.h declare af_latin_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/aflatin.c when FT_CONFIG_OPTION_PIC is defined
af_latin_script_class struct will have function to init it instead of
being allocated in the global scope.
Change af_latin_blue_chars to be PIC-compatible by being a two
dimentional array rather than array of pointers.
* src/autofit/aflatin2.h declare af_latin2_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/aflatin2.c when FT_CONFIG_OPTION_PIC is defined
af_latin2_script_class struct will have function to init it instead of
being allocated in the global scope.
Change af_latin2_blue_chars to be PIC-compatible by being a two
dimentional array rather than array of pointers.
* src/autofit/afglobal.c when FT_CONFIG_OPTION_PIC is defined
af_script_classes array initialization was moved to afpic.c and
is later refered using macros defeined in afpic.h.
New Files:
* src/autofit/afpic.h declare struct to hold PIC globals for autofit
module and macros to access them.
* src/autofit/afpic.c implement functions to allocate, destroy and
initialize PIC globals for autofit module.
* src/autofit/autofit.c add new file to build: afpic.c.
* src/autofit/jamfile add new files to FT2_MULTI build: afpic.c.
* include/freetype/internal/pshints.h add macros to init
instances of PSHinter_Interface.
* src/pshinter/pshmod.h declare pshinter_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/pshinter/pshmod.c when FT_CONFIG_OPTION_PIC is defined
pshinter_interface and pshinter_module_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from pshpic.h in order to access them.
New Files:
* src/pshinter/pshpic.h declare struct to hold PIC globals for pshinter
module and macros to access them.
* src/pshinter/pshpic.c implement functions to allocate, destroy and
initialize PIC globals for pshinter module.
* src/pshinter/pshinter.c add new file to build: pshpic.c.
* src/pshinter/jamfile add new files to FT2_MULTI build: pshpic.c.
* include/freetype/internal/services/svpscmap.h add macros to init
instances of FT_Service_PsCMapsRec.
* src/psnames/psmodule.h declare psnames_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/psnames/psmodule.c when FT_CONFIG_OPTION_PIC is defined
pscmaps_interface and pscmaps_services structs
and psnames_module_class array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from pspic.h in order to access them.
New Files:
* src/psnames/pspic.h declare struct to hold PIC globals for psnames
module and macros to access them.
* src/psnames/pspic.c implement functions to allocate, destroy and
initialize PIC globals for psnames module.
* src/psnames/psnames.c add new file to build: pspic.c.
* src/psnames/jamfile add new files to FT2_MULTI build: pspic.c.
* src/raster/ftrend1.h declare ft_raster1_renderer_class
and ft_raster5_renderer_class
using macros from ftrender.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/smooth/ftrend1.c when FT_CONFIG_OPTION_PIC is defined
ft_raster1_renderer_class and ft_raster5_renderer_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
Macros will be used from rastpic.h in order to access
ft_standard_raster from the pic_container (allocated in ftraster.c).
In ft_raster1_render when PIC is enabled, the last letter of
module_name is used to verfy the renderer class rather than the
class pointer.
* src/raster/ftraster.c when FT_CONFIG_OPTION_PIC is defined
ft_standard_raster struct will have function to init it
instead of being allocated in the global scope.
New Files:
* src/raster/rastpic.h declare struct to hold PIC globals for raster
renderer and macros to access them.
* src/raster/rastpic.c implement functions to allocate, destroy and
initialize PIC globals for raster renderer.
* src/raster/raster.c add new file to build: rastpic.c.
* src/raster/jamfile add new files to FT2_MULTI build: rastpic.c.
* src/smooth/ftsmooth.h declare ft_smooth_renderer_class,
ft_smooth_lcd_renderer_class and ft_smooth_lcd_v_renderer_class
using macros from ftrender.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/smooth/ftsmooth.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
ft_smooth_renderer_class, ft_smooth_lcd_renderer_class
and ft_smooth_lcd_v_renderer_class
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ftspic.h in order to access
ft_grays_raster from the pic_container (allocated in ftgrays.c).
* src/smooth/ftgrays.h include FT_CONFIG_CONFIG_H
* src/smooth/ftgrays.c when FT_CONFIG_OPTION_PIC is NOT defined
func_interface was moved from gray_convert_glyph_inner function
to the global scope.
When FT_CONFIG_OPTION_PIC is defined
func_interface and ft_grays_raster structs
will have functions to init them
instead of being allocated in the global scope.
And func_interface will be allocated on the stack of
gray_convert_glyph_inner.
New Files:
* src/smooth/ftspic.h declare struct to hold PIC globals for smooth
renderer and macros to access them.
* src/smooth/ftspic.c implement functions to allocate, destroy and
initialize PIC globals for smooth renderer.
* src/smooth/smooth.c add new file to build: ftspic.c.
* src/smooth/jamfile add new files to FT2_MULTI build: ftspic.c.
* include/freetype/internal/services/svcid.h add macros to init
instances of FT_Service_CIDRec.
* include/freetype/internal/services/svpsinfo.h add macros to init
instances of FT_Service_PsInfoRec.
* src/cff/cffcmap.h declare cff_cmap_encoding_class_rec
and cff_cmap_unicode_class_rec using macros from
ftobjs.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/cff/cffcmap.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
cff_cmap_encoding_class_rec and cff_cmap_unicode_class_rec
will have functions to init or create and destroy them
instead of being allocated in the global scope.
* src/cff/cffdrivr.h declare cff_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/cff/cffdrivr.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
cff_service_glyph_dict, cff_service_ps_info, cff_service_ps_name
cff_service_get_cmap_info, cff_service_cid_info, cff_driver_class,
and cff_services array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from cffpic.h in order to access them
from the pic_container.
Use macros from cffpic.h in order to access the
structs allocated in cffcmap.c
* src/cff/cffobjs.c Use macros from cffpic.h in order to access the
structs allocated in cffcmap.c
* src/cff/parser.c when FT_CONFIG_OPTION_PIC is defined
implement functions to create and destroy cff_field_handlers array
instead of being allocated in the global scope.
And macros will be used from cffpic.h in order to access it
from the pic_container.
New Files:
* src/cff/cffpic.h declare struct to hold PIC globals for cff
driver and macros to access them.
* src/cff/cffpic.c implement functions to allocate, destroy and
initialize PIC globals for cff driver.
* src/cff/cff.c add new file to build: cffpic.c.
* src/cff/jamfile add new files to FT2_MULTI build: cffpic.c.
* include/freetype/internal/services/svbdf.h add macros to init
instances of FT_Service_BDFRec.
* include/freetype/internal/services/svgldict.h add macros to init
instances of FT_Service_GlyphDictRec.
* include/freetype/internal/services/svpostnm.h add macros to init
instances of FT_Service_PsFontNameRec.
* include/freetype/internal/services/svsfnt.h add macros to init
instances of FT_Service_SFNT_TableRec.
* include/freetype/internal/services/svttcmap.h add macros to init
instances of FT_Service_TTCMapsRec.
* include/freetype/internal/sfnt.h add macros to init
instances of SFNT_Interface.
* src/sfnt/sfdriver.h declare sfnt_module_class using macros from
ftmodapi.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/sfnt/sfdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
sfnt_service_sfnt_table, sfnt_service_glyph_dict, sfnt_service_ps_name
tt_service_get_cmap_info, sfnt_service_bdf, sfnt_interface,
sfnt_module_class, and sfnt_services array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from sfntpic.h in order to access them
from the pic_container.
* src/sfnt/ttcmap.h add macros to init
instances of TT_CMap_ClassRec.
* src/sfnt/ttcmap.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_cmap0_class_rec, tt_cmap2_class_rec, tt_cmap4_class_rec
tt_cmap6_class_rec, tt_cmap8_class_rec, tt_cmap10_class_rec,
tt_cmap12_class_rec, tt_cmap14_class_rec and tt_cmap_classes array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from sfntpic.h in order to access them
from the pic_container.
The content of tt_cmap_classes is now described in the
new file 'ttcmapc.h'.
New Files:
* src/sfnt/sfntpic.h declare struct to hold PIC globals for sfnt
driver and macros to access them.
* src/sfnt/sfntpic.c implement functions to allocate, destroy and
initialize PIC globals for sfnt driver.
* src/sfnt/ttcmapc.h describing the content of
tt_cmap_classes allocated in ttcmap.c
* src/sfnt/sfnt.c add new file to build: sfntpic.c.
* src/sfnt/jamfile add new files to FT2_MULTI build: sfntpic.c.
* include/freetype/internal/services/svmm.h add macros to init
instances of FT_Service_MultiMastersRec.
* include/freetype/internal/services/svttglyf.h add macros to init
instances of FT_Service_TTGlyfRec.
* src/truetype/ttdriver.h declare tt_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/truetype/ttdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_service_gx_multi_masters, tt_service_truetype_glyf, tt_driver_class
and tt_services array,
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ttpic.h in order to access them
from the pic_container.
* src/truetype/ttobjs.c change trick_names array to be
PIC-compatible by being a two dimentional array rather than array
of pointers.
New Files:
* src/truetype/ttpic.h declare struct to hold PIC globals for truetype
driver and macros to access them.
* src/truetype/ttpic.c implement functions to allocate, destroy and
initialize PIC globals for truetype driver.
* src/truetype/truetype.c add new file to build: ttpic.c.
* src/truetype/jamfile add new files to FT2_MULTI build: ttpic.c.
* include/freetype/config/ftoption.h add FT_CONFIG_OPTION_PIC
* include/freetype/internal/ftobjs.h Add pic_container member to
FT_LibraryRec.
Add macros to declare and init instances of FT_CMap_ClassRec.
Add macros to init instances of FT_Outline_Funcs and FT_Raster_Funcs.
Add macros to declare, allocate and initialize modules
(FT_Module_Class).
Add macros to declare, allocate and initialize renderers
(FT_Renderer_Class).
Add macro to init instances of FT_Glyph_Class.
Add macros to declare, allocate and initialize drivers
(FT_Driver_ClassRec).
* include/freetype/internal/ftpic.h new file to declare the
FT_PIC_Container struct and the functions to allocate and detroy it.
* include/freetype/internal/ftserv.h add macros to allocate and
destory arrays of FT_ServiceDescRec.
* include/freetype/internal/internal.h define macro to include
ftpic.h.
New Files:
* src/base/ftpic.c implement functions to allocate and destory the
global pic_container.
* src/base/basepic.h declare struct to hold PIC globals for base and
macros to access them.
* src/base/basepic.c implement functions to allocate, destroy and
initialize PIC globals for base.
* src/base/ftinit.c when FT_CONFIG_OPTION_PIC is defined implement
functions that allocate and destroy ft_default_modules according to
FT_CONFIG_MODULES_H in the pic_container instead of the global scope
and use macro from basepic.h to access it.
* src/base/ftobjs.c add calls to the functions that allocate and
destroy the global pic_container when the library is created and
destroyed.
* src/base/jamfile add new files to FT2_MULTI build:
ftpic.c and basepic.c.
* src/base/ftbase.c add new files to build:
ftpic.c and basepic.c.
* src/base/ftglyph.c when FT_CONFIG_OPTION_PIC is defined
ft_bitmap_glyph_class and ft_outline_glyph_class will be allocated
in the pic_container instead of the global scope and use macros from
basepic.h to access them.
* src/base/ftbbox.c allocate bbox_interface stract on the stack
instead of the global scope when FT_CONFIG_OPTION_PIC is defined.
* src/base/ftstroke.c access ft_outline_glyph_class allocated in
ftglyph.c via macros from basepic.h
* src/cff/cffload.c, src/cff/cffload.h, src/cff/cffobjs.c,
src/cff/cffparse.c, src/cff/cffparse.h: Add library pointer to
'CFF_ParserRec' set by `cff_parser_init'.
Route library pointer from 'cff_face_init' to 'cff_subfont_load'
for `cff_parser_init'.
* src/cff/cffparse.c (CFF_Field_Handler): Move it to...
* src/cff/cffparse.h: This file, to be used by other C files.
suzuki toshiya