* include/freetype/config/ftstdlib.h (FT_USHORT_MAX): New macro.
* src/base/ftbitmap.c (FT_Bitmap_Convert): Protect against invalid
value of `target->rows'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Add check for
flex start.
* src/raster/ftrend1.c (ft_raster1_render): Check `width' and
`height'.
* src/truetype/ttgxvar.c (TT_Vary_Get_Glyph_Deltas): Protect against
invalid values in `localpoints' array.
Found with font fuzzying.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Check
`decoder->buildchar'.
* src/type1/t1load.c (t1_load_keyword): Check `blend->num_designs'.
When shifting right a signed value, it is not defined by the
C standard whether one gets a sign extension or not. Use a macro to
do an explicit cast from a signed short (assuming that this is
16bit) to an int.
* src/psaux/t1decode.c (Fix2Int): New macro.
Use it where appropriate.
start_point, check_points, add_point, add_point1, close_contour
macros.
Remove add_contour macro.
Return error code from t1_builder_start_point and
t1_builder_check_points when there was one (instead of returning 0).
Previously we discovered fonts which used `setcurrentpoint' to set
the initial point of a contour to 0,0. This caused FreeType to
raise an error, because the `setcurrentpoint' operator is only
supposed to be used with the results from an OtherSubr subroutine.
This was fixed by simply ignoring the error and carrying on.
Now we have found a font which uses setcurrentpoint to actually
establish a non-zero point for a contour during the course of a
glyph program. FWIW, these files may be produced by an application
called `Intaglio' on the Mac, when converting TrueType fonts to
Type 1.
The fix allows the new invalid behaviour, the old invalid behaviour
and real proper usage of the operator to work the same way as Adobe
interpreters apparently do.
(t1_decoder_parse_charstrings): Make `setcurrentpoint' use the top
two elements of the stack to establish unconditionally the current x
and y coordinates.
Make the `flex' subroutine handling (OtherSubr 0) put the current
x,y coordinates onto the stack, instead of two dummy uninitialised
values.
Issue #28226 involved a work-around for a font which used the
`setcurrentpoint' operator in an invalid way; this operator is only
supposed to be used with the result of OtherSubrs, and the font used
it directly. The supplied patch removed the block of code which
checked this usage entirely.
This turns out to be a Bad Thing. If `setcurrentpoint' is being
used correctly it should reset the flex flag in the decoder. If we
don't do this then the flag never gets reset and we omit any further
contours from the glyph (at least until we close the path or
similar).
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
<op_setcurrentpoint>: Handle `flex_state' correctly.
This fixes Savannah bug #28226.
At least two wild PostScript files of unknown provenance contain
Type 1 fonts, apparently converted from TrueType fonts in earlier
PDF versions of the files, which use the `setcurrentpoint' operator
inappropriately.
FreeType currently throws an error in this case, but Ghostscript and
Adobe Distiller both accept the fonts and ignore the problem. This
commit #ifdefs out the check so PostScript interpreters using
FreeType can render these files.
The specification says `setcurrentpoint' should only be used to set
the point after a `Subr' call, but these fonts use it to set the
initial point to (0,0). Unnecessarily so, as they correctly use an
`hsbw' operation which implicitly sets the initial point.
* include/freetype/internal/t1types.h (T1_EncodingRecRec_): Update
comment to reflect revised code_last meaning.
* src/type1/t1load.c (T1_Open_Face), src/type42/t42objs.c
(T42_Open_Face): Assign max_char as highest character code + 1 and
use this for T1_EncodingRecRec_::code_last.
* src/psaux/t1cmap.c (t1_cmap_custom_init): Follow revised
T1_EncodingRecRec_::code_last meaning.
This fixes Savannah bug #26867.
Previously, only integers have been used which can lead to serious
rounding errors.
However, fractional values are only used internally; after the
charstrings (of either Type 1 or 2) have been processed, the
resulting coordinates get rounded to integers currently -- before
applying scaling. This should be fixed; at the same time a new load
flag should be introduced, to be used in combination with
FT_LOAD_NO_SCALE, which indicates that font units are returned in
16.16 format. Similarly, the incremental interface should be
extended to allow fractional values for metrics.
* include/freetype/internal/psaux.h (T1_BuilderRec): Remove `shift'
field.
* include/freetype/internal/pshints.h (T1_Hints_SetStemFunc,
T1_Hints_SetStem3Func): Use FT_Fixed for coordinates.
* src/psaux/psobjs.c: Include FT_INTERNAL_CALC_H.
(t1_build_add_point): Always convert fixed to integer.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Use 16.16 format everywhere (except for large integers followed by a
`div').
[CAN_HANDLE_NON_INTEGRAL_T1_OPERANDS]: Remove #ifdef and activate
code uncoditionally.
Add support for random numbers and update remaining code
accordingly; this should work now.
(t1_operator_seac): Updated.
* src/psaux/pshrec.c: Include FT_INTERNAL_CALC_H.
(ps_hints_t1stem3, t1_hints_stem): Updated.
* src/cid/cidgload.c: Include FT_INTERNAL_CALC_H.
(cid_load_glyph) [FT_CONFIG_OPTION_INCREMENTAL],
(cid_face_compute_max_advance, cid_slot_load_glyph): Updated.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String)
[FT_CONFIG_OPTION_INCREMENTAL], (T1_Get_Advances, T1_Load_Glyph):
Updated.
* src/type1/t1load.c: Include FT_INTERNAL_CALC_H.
* src/type1/t1objs.c (T1_Face_Init): Updated.
SEAC (Single Encoding Accented Characters) are composed of (basically) two
indices specifying two other glyphs, and a movement to position the accent
properly with respect to the main glyph.
To make it work with the incremental interface we now demand that the caller
handles the encoding by itself.
* src/psaux/psobjs.c (ps_parser_load_field_table): Don't handle
`count_offset' if it is zero (i.e., unused). Otherwise, the first
element of the structure which holds the data is erroneously
modified. Problem reported by Chi Nguyen <chint@necsv.com>.
extern const FT_Module_Class
(or similar for C++). However, the actual types of the variables
being declared are often different, e.g., FT_Driver_ClassRec or
FT_Renderer_Class. (Some are, indeed, FT_Module_Class.)
This works with most C compilers (since those structs begin with an
FT_Module_Class struct), but technically it's undefined behavior.
To quote the ISO/IEC 9899:TC2 final committee draft, section 6.2.7
paragraph 2:
All declarations that refer to the same object or function shall
have compatible type; otherwise, the behavior is undefined.
(And they are not compatible types.)
Most C compilers don't reject (or even detect!) code which has this
issue, but the GCC LTO development branch compiler does. (It
outputs the types of the objects while generating .o files, along
with a bunch of other information, then compares them when doing the
final link-time code generation pass.)
Patch from Savannah bug #25133.
* src/base/ftinit.c (FT_USE_MODULE): Include variable type.
* builds/amiga/include/freetype/config/ftmodule.h,
include/freetype/config/ftmodule.h, */module.mk: Updated to declare
pass correct types to FT_USE_MODULE.
fonts (like HELVI.PFB version 003.001, used on OS/2) which define
some `subrs' elements more than once. Problem reported by Peter
Weilbacher <mozilla@weilbacher.org>.
and `scale_y' as obsolete since they aren't used.
* src/psaux/psobjs.c (t1_builder_init): Updated.
* src/cff/cffgload.h (CFF_Builder): Mark `scale_x' and `scale_y' as
obsolete since they aren't used.
* src/cff/cffgload.c (cff_builder_init): Updated.
logic.
(ps_parser_load_field) <T1_FIELD_TYPE_BBOX>: Skip delimiters
correctly.
(ps_parser_load_field_table): Use `fields->array_max' instead of
T1_MAX_TABLE_ELEMENTS to limit the number of arguments.
Fonts without a cmap must be handled correctly by FreeType (anything
else would be a bug).
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
[FT_DEBUG_LEVEL_TRACE]: Improve tracing message.
add T1_TOKEN_TYPE_KEY. (struct T1_FieldRec_) add `dict'. Add macros
T1_FIELD_DICT_FONTDICT and T1_FIELD_DICT_PRIVATE. Change T1_NEW_XXX and
T1_FIELD_XXX macros to take the dictionary where the PS keywords is
expected as an additional argument.
* freetype2/src/cid/cidload.c: (T1_FieldRec): Adjust invocations
of T1_FIELD_XXX.
* freetype2/src/cid/cidtoken.h: Adjust invocations of T1_FIELD_XXX.
* freetype2/src/psaux/psobjs.c: Add macro FT_COMPONENT for tracing.
(ps_parser_to_token): Report a PostScript key as T1_TOKEN_TYPE_KEY
instead as T1_TOKEN_TYPE_ANY. (ps_parser_load_field): Make sure a token
that should be a string or name is a string or name indeed. Avoid
memory leak if a keyword has been already encountered and its value
is overwritten.
* freetype2/src/type1/t1load.c: (T1_FieldRec): Adjust invocations of
T1_FIELD_XXX. (parse_dict): Ignore keywords that occur in the wrong
dictionary (e.g., in Private instead of FontDict).
* freetype2/src/type1/t1tokens.h: Adjust invocations of T1_FIELD_XXX.
`t1_decoder_init' and let the caller of `t1_decoder_init' take care
of it.
Call the finisher for T1_Decoder in `cid_face_compute_max_advance'
and `T1_Compute_Max_Advance'.
* freetype2/include/freetype/internal/psaux.h (T1_DecoderRec):
Remove field `face', add `len_buildchar'.
* freetype2/include/freetype/internal/t1types.h (T1_FaceRec): Add
field `buildchar'.
* freetype2/src/cid/cidgload.c (cid_face_compute_max_advance): Call
finisher for T1_Decoder.
(cid_slot_load_glyph): Do not ignore failure when initializing the
T1_Decoder.
* freetype2/src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Updated.
(t1_decoder_init): Remove initialization of fields `buildchar' and
`len_buildchar'.
(t1_decoder_done): Remove deallocation of field `buildchar'.
* freetype/src/type1/t1gload.c (T1_Compute_Max_Advance): Initialize
T1_Decoder's `buildchar' and `len_buildchar'; call finisher for
T1_Decoder.
(T1_Load_Glyph): Initialize T1_Decoder's `buildchar' and
`len_buildchar'; make sure to call finisher for T1_Decoder even in
case of error.
* freetype2/src/type1/t1load.c (T1_Open_Face): Allocate new field
`buildchar' of T1_FaceRec.
* freetype2/src/type1/t1objs.c (T1_Face_Done): Free new field
`buildchar' of T1_FaceRec.
IS_PS_NEWLINE, IS_PS_SPACE, IS_PS_SPECIAL, IS_PS_DELIM, IS_PS_DIGIT,
IS_PS_XDIGIT, and IS_PS_BASE85 (from freetype2/src/psaux/psconv.h).
(T1_FieldLocation): Add T1_FIELD_LOCATION_LOADER,
T1_FIELD_LOCATION_FACE, and T1_FIELD_LOCATION_BLEND.
(T1_DecoderRec): New fields `buildchar' and `face'.
(IS_PS_TOKEN): New macro.
* freetype2/include/freetype/internal/t1types.h (T1_FaceRec): New
fields `ndv_idx', `cdv_idx', and `len_buildchar'.
* freetype2/include/freetype/t1tables.h (PS_BlendRec): New fields
`default_design_vector' and `num_default_design_vector'.
* freetype2/src/psaux/psconv.h: Move macros IS_PS_NEWLINE,
IS_PS_SPACE, IS_PS_SPECIAL, IS_PS_DELIM, IS_PS_DIGIT, IS_PS_XDIGIT,
and IS_PS_BASE85 to freetype2/include/freetype/internal/psaux.h.
* freetype2/src/psaux/psobjs.c (ps_parser_to_token_array): Allow
`token' argument to be NULL if we want only to count the number of
tokens.
(ps_tocoordarray): Allow `coords' argument to be NULL if we just
want to skip the array.
(ps_tofixedarray): Allow `values' argument to be NULL if we just
want to skip the array.
* freetype2/src/psaux/t1decode.c (t1_decoder_parse_charstrings): Add
support for (partially commented out) othersubrs 19-25, 27, and 28.
(t1_decoder_init): Initialize new fields `face' and `buildchar'.
(t1_decoder_done): Release new field `buildchar'.
* freetype2/src/type1/t1load.c (parse_buildchar, parse_private): New
functions.
(t1_keywords): Register them.
(t1_allocate_blend): Updated.
(t1_load_keyword): Handle field types T1_FIELD_LOCATION_LOADER,
T1_FIELD_LOCATION_FACE and T1_FIELD_LOCATION_BLEND.
(parse_dict): Remove `keyword_flags' argument.
Use new macro IS_PS_TOKEN.
Changed function so that later PostScript definitions override
earlier ones.
(t1_init_loader): Initialize new field `keywords_encountered'.
(T1_Open_Face): Initialize new fields `ndv_idx', `cdv_idx', and
`len_buildchar'.
Remove `keywords_flags'.
* freetype2/src/type1/t1load.h (T1_LoaderRect): New field
`keywords_encountered'.
(T1_PRIVATE, T1_FONTDIR_AFTER_PRIVATE): New macros.
* freetype2/src/type1/t1tokens.h [!T1_CONFIG_OPTION_NO_MM_SUPPORT]:
New entries for parsing /NDV, /CDV, and /DesignVector.
(t1_decoder_parse_charstrings): Operator with
opcode 15 pops its two arguments.
Handle the case where the pops of an othersubr may be part of a
subroutine.
Handle unknown othersubrs gracefully: count their operands and let
the following pop operators push the operands as the results onto
the Type1 stack.
Improve handling of setcurrentpoint opcode.
for a `Simplified Parser'. This makes the parser more robust as it
doesn't poke around in PostScript code. Additionally, it makes the
FontDirectory hackery in src/type1/t1load.c unnecessary.
* src/psaux/psobjs.c (IS_OCTAL_DIGIT): New macro.
(skip_literal_string): Add FT_Error as return value.
Handle escapes better.
(skip_string): Add FT_Error as return value.
Don't set `parser->error' but return error code directly.
(skip_procedure): New function.
(ps_parser_skip_PS_token): Handle procedures.
Update code.
(ps_parser_to_token): Update code.
(ps_parser_load_field_table): Handle bbox entries also.
* src/type1/t1load.c (parse_dict): Remove FontDirectory hackery.
Add commented-out code for synthetic fonts.
src/psaux/t1cmap.c, src/psnames/psmodule.c: Fix for the memory
leak described in bug #16759.
We change 'ps_unicodes_init' so that it also takes a 'free_glyph_name'
callback to release the glyph names returned by 'get_glyph_name'
src/autofit/afcjk.c, src/autofit/afhints.c, src/autofit/aflatin.c,
src/autofit/aftypes.h, src/base/ftcalc.c, src/base/ftoutln.c,
src/gzip/ftgzip.c, src/psaux/psconv.c, src/truetype/ttgload.c,
src/type1/t1gload.c:
this is a major patch used to drastically improve the performance
of loading glyphs. This both speeds up loading the glypn vector
themselves and the auto-fitter.
note that we've started using inline assembler with GCC to
implement FT_MulFix, given that this function is so damn
important for the engine's performance.
the resulting speed-up is about 25%.
src/base/ftobjs.c, src/base/ftutil.c, src/cff/cffobjs.c,
src/psaux/afmparse.c, src/sfnt/ttbdf.c, src/tools/apinames.c,
src/truetype/ttdriver.c:
solved compiler warnings as well as C++ compilation problems
sufficient to modify a single file, `modules.cfg', to control the
inclusion of modules and base extension files.
This change also fixes the creation of ftmodule.h; it now depends on
`modules.cfg' and thus is rebuilt only if necessary.
Finally, a version of `ftoption.h' in OBJ_DIR is preferred over the
default location.
* modules.cfg: New file.
* builds/freetype.mk: Don't include `modules.mk'.
Include all `rules.mk' files as specified in `modules.cfg'.
(FTOPTION_FLAG, FTOPTION_H): New variables.
(FT_CFLAGS): Add macro definition for FT_CONFIG_MODULES_H.
Add FTOPTION_FLAG.
($(FT_INIT_OBJ)): Don't use FT_MODULE_LIST.
(CONFIG_H): Add FTMODULE_H and FTOPTION_H.
(INCLUDES): Add DEVEL_DIR.
(INCLUDE_FLAGS, FTSYS_SRC, FTSYS_OBJ, FTDEBUG_SRC, FTDEBUG_OBJ,
OBJ_M, OBJ_S): Use `:=', not `='.
(remove_ftmodule_h): New phony target to delete `ftmodule.h'.
(distclean): Add remove_ftmodule_h.
* builds/modules.mk: (MODULE_LIST): Removed.
(make_module_list, clean_module_list): Replace targets
with...
(FTMODULE_H_INIT, FTMODULE_H_CREATE, FTMODULE_H_DONE): New
variables. Reason for the change is that it is not possible to have
a phony prerequisite which is run only if the target file must be
rebuilt (phony prerequisites act like subroutines and are *always*
executed). We only want to rebuild `ftmodule.h' if `module.cfg' is
changed.
Update all callers.
($FTMODULE_H)): Rule to create `ftmodule.h', depending on
`modules.cfg'.
* builds/toplevel.mk: Rewrite and simplify module handling.
(MODULES_CFG, FTMODULE_H): New variables.
Include MODULES_CFG.
(MODULES): New variable to include all `module.mk' and `rules.mk'
files. We no longer use make's `wildcard' function for this.
* Makefile (USE_MODULES): Remove. Update all users.
(OBJ_DIR): Define it here.
* src/*/module.mk: Change
make_module_list: foo
foo: ...
to
FTMODULE_H_COMMANDS += FOO
define FOO
...
endef
in all files. `FTMODULE_H_COMMANDS' is used in `FTMODULE_H_CREATE'.
* src/base/rules.mk (BASE_EXT_SRC): Use BASE_EXTENSIONS.
* builds/unix/detect.mk (setup): Always execute `configure' script.
(have_mk): Rename to...
(have_Makefile): This.
Don't use `strip' function.
* builds/unix/unix.mk: Include `install.mk' only if BUILD_PROJECT is
defined.
(have_mk): Don't use `strip' function.
Test for unix-def.mk in OBJ_DIR, not BUILD_DIR (and invert the test
accordingly).
* builds/unix/install.mk (install, uninstall): Handle `ftmodule.h'.
* builds/os2/os2-dev.mk, builds/unix/unix-dev.mk,
builds/win32/w32-bccd.mk, builds/win32/w32-dev.mk: Don't define
BUILD_DIR but DEVEL_DIR for development header files.
* builds/ansi/ansi-def.mk (TOP_DIR, OBJ_DIR),
builds/beos/beos-def.mk (TOP_DIR, OBJ_DIR), builds/unix/unix-def.in
(TOP_DIR, OBJ_DIR): Removed. Defined elsewhere.
* builds/dos/dos-def.mk (OBJ_DIR), builds/os2/os2-def.mk (OBJ_DIR),
builds/win32/win32-def.mk (OBJ_DIR): Removed. Defined elsewhere.
* builds/unix/unixddef.mk: Don't define BUILD_DIR but DEVEL_DIR for
development header files.
Don't define PLATFORM.
* configure: Copy `modules.cfg' to builddir if builddir != srcdir.
Update snippet taken from autoconf's m4sh.m4 to current CVS version.
Be more verbose.
* include/freetype/config/ftmodule.h: Add comments -- this file is
no longer used if FreeType is built with GNU make.
* docs/CHANGES, docs/CUSTOMIZE, docs/INSTALL, docs/INSTALL.ANY,
docs/INSTALL.GNU, docs/INSTALL.UNX: Document new build mechanism.
Other minor updates.
* modules.txt: Removed. Contents included in `modules.cfg'.
* include/freetype/internal/ftmemory.h (FT_QAlloc_Debug,
FT_Free_Debug) [FT_STRICT_ALIASING]: Fix typos.
* src/base/ftdbgmem.c (FT_Alloc_Debug, FT_Realloc_Debug,
FT_QAlloc_Debug, FT_QRealloc_Debug, FT_Free_Debug)
[FT_STRICT_ALIASING]: Implement.
src/psaux/afmparse.c, src/tools/test_afm.c: Read `FontBBox',
`Ascender', and `Descender' from an AFM.
* src/type1/t1afm.c (T1_Read_Metrics): Use the metrics from the AFM.
* include/freetype/freetype.h (FT_FaceRec): Mention that fields may be
changed after file attachment.
the warp hinter isn't active (it shouldn't, still experimental)
* Jamfile, include/freetype/config/ftmodule.h: removed "gxvalid"
and "otvalid" from the list of modules that are linked statically
to a given FreeType library. Functionality has been moved to the
"ftvalid" CVS module.
note also that current Make-based build system still compiles the
modules though...
* include/freetype/config/ftoption.h: added FT_STRICT_ALIASING,
which controls the definitions of the memory management functions
to avoid warnings with recent versions of GCC. this macro is
only here to be disabled, in case we detect problems with the
new scheme.
NOTE: disable macro to use the memory debugger. this will be fixed
later !!
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
implement an AFM parser. It is used to parse an AFM file.
* src/psaux/psconv.c, src/psaux/psconv.h: New files to provide
conversion functions (e.g, PS real number => FT_Fixed) for the
PS_Parser and AFM_Parser. Some of the functions are taken, with some
modifications, from the psobjs.c
* src/psaux/psobjs.c: Use functions from psconv.c.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c:: Add
`AFM_Parser' to the `psaux' service.
* src/psaux/psaux.c, src/psaux/rules.mk: Include those new files.
* src/tools/test_afm.c: A test program for AFM parser.
* include/freetype/internal/services/svkern.h,
include/freetype/internal/ftserv.h: New service `Kerning'. It is
currently only used to get the track kerning information.
* src/type1/t1driver.c, src/type1/t1objs.c, src/type1/t1afm.c,
src/type1/t1afm.h: Update to use the AFM parser.
Provide the `Kerning' service.
* include/freetype/freetype.h, src/base/ftobjs.c: New API
`FT_Get_Track_Kerning'.
* include/freetype/internal/services/svpscmap.h: Include
FT_INTERNAL_OBJECTS_H.
(PS_Unicode_Index_Func): Removed. Unused.
(PS_Macintosh_Name_Func): Renamed to...
(PS_Macintosh_NameFunc): This.
Update all callers.
(PS_Adobe_Std_Strings_Func): Renamed to...
(PS_Adobe_Std_StringsFunc): This.
Update all callers.
(PS_UnicodesRec): This is the former `PS_Unicodes' structure.
Add `cmap' member.
Update all callers.
(PS_Unicodes): This is now a typedef'd pointer to PS_UnicodesRec.
Update all callers.
(PS_Glyph_NameFunc): New typedef.
(PS_Unicodes_InitFunc): Change arguments to expect a function
and generic data pointer which returns a glyph name from a given
index.
* src/psnames/psmodule.c (ps_unicodes_init, ps_unicodes_char_index,
ps_unicodes_char_next, pscmaps_interface): Updated.
* include/freetype/internal/t1types.h (T1_FaceRec): Updated.
* src/psaux/t1cmap.h (T1_CmapStdRec): Updated.
(T1_CmapUnicode, T1_CmapUnicodeRec): Removed.
* src/psaux/t1cmap.c (t1_get_glyph_name): New callback function.
(t1_cmap_unicode_init, t1_cmap_unicode_done,
t1_cmap_unicode_char_index, t1_cmap_unicode_char_next,
t1_cmap_unicode_class_rec): Updated.
* src/type42/t42types.h (T42_FaceRec): Updated.
* include/freetype/internal/services/svpscmap.h (PS_UniMap): Use
FT_UInt32 for `glyph_index'.
(PS_Unicodes_InitFunc): Use FT_String for `glyph_names'.
(PS_Unicodes_CharIndexFunc): Use FT_UInt32 for `unicode'.
(PS_Unicodes_CharNextFunc): Make second argument a pointer to
FT_UInt32.
* src/psnames/psmodule.c (VARIANT_BIT, BASE_GLYPH): New macros.
(ps_unicode_value): Set VARIANT_BIT in return value if glyph is a
variant glyph (this is, it has non-leading `.' in its name).
(compare_uni_maps): Sort base glyphs before variant glyphs.
(ps_unicodes_init): Use FT_String for `glyph_names' argument.
Reallocate only if number of used entries is much smaller.
Updated to handle variant glyphs.
(ps_unicodes_char_index, ps_unicodes_char_next): Prefer base glyphs
over variant glyphs.
Simplify code.
* src/psaux/t1cmap.c (t1_cmap_uni_pair_compare): Removed.
(t1_cmap_unicode_init, t1_cmap_unicode_char_index,
t1_cmap_unicode_char_next): Use pscmap service.
(t1_cmap_unicode_done): Updated.
* src/psaux/t1cmap.h (T1_CMapUniPair): Removed.
(T1_CMapUnicode): Use PS_Unicodes structure.
- fixing apinames.c, adding support for Watcom and Borland compilers
- adding generation of exported symbols list to the build system, including the Unix one !!
sorry Werner, I have no time to document this in ChangeLog at the moment
return the FreeType version. Suggested by George Williams
<gww@silcom.com>.
* docs/CHANGES: Updated.
* src/otvalid/otvmod.c (otv_validate): Deallocate arrays in case
of error. Reported by YAMANO-UCHI Hidetoshi <mer@din.or.jp>.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
<op_closepath>: Accept `T1_Parse_Have_Moveto' state also which can
happen in empty glyphs. Reported by Ian Brown
<ian.brown@printsoft.de>.
enumeration.
(T1_BuilderRec): Replace `path_begun' with `parse_state'.
Remove `error'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Replace
`Memory_Error' with `Fail' and update all users.
Don't use `builder->error'.
Replace `path_begun' with `parse_state' and check parsing states.
* src/psaux/psobjs.c (t1_builder_init, t1_builder_start_point):
Replace `path_begun' with `parse_state' and check parsing states.
face->cid_stream so that we can deallocate it safely.
Make the PS parser more tolerant w.r.t. non-standard font data. In
general, an error is only reported in case of a syntax error; a
wrong type is now simply ignored (if possible). To be independent
of the order of various MM-specific keywords, the parse_shared_dict
routine has been removed -- the PS parser is now capable to skip
this data. It no longer fails on parsing e.g.
dup /WeightVector exch def
Since the token following /WeightVector isn't `[' (starting an
array) it is simply ignored.
* include/freetype/fterrdef.h: Define `FT_Err_Ignore' (0xA2) as a
new internal error value.
* src/type1/t1load.c (parse_blend_axis_types,
parse_blend_design_positions, parse_blend_design_map): Return
T1_Err_Ignore if no proper array is following the keyword.
(parse_weight_vector): Use T1_ToTokenArray, initializing `blend'
structure, if necessary.
Return T1_Err_Ignore if no proper array is following the keyword.
(parse_shared_dict): Removed.
(parse_encoding): Set parser->root.error to return T1_Err_Ignore
if no result can be obtained.
Check for errors before accessing `elements' array.
(t1_keywords): Remove /shareddict.
(parse_dict): Reset error if t1_load_keyword returns T1_Err_Ignore.
Set keyword_flag only in case of success.
Check error code if skipping an unrecognized token.
(T1_Open_Face) [!T1_CONFIG_OPTION_NO_MM_SUPPORT]: Call T1_Done_Blend
if blend commands haven't set up a proper MM font.
* src/psaux/psobjs.c (ps_parser_load_field_table): Remove special
code for synthetic fonts.
Return PSaux_Err_Ignore if no proper value has been found.
accent offset.
Update code similarly to the seac support for Type 1 fonts.
(cff_decoder_parse_charstrings) <cff_op_endchar>: Fix magnitude
of accent offset.
Don't hint glyphs twice if seac is emulated.
<cff_op_flex>: Assign correct point tags.
* docs/CHANGES: Updated.
* src/type1/t1parse.c (T1_Get_Private_Dict): Use FT_MEM_MOVE, not
FT_MEM_COPY, for copying the private dict.
* src/type1/t1load.c (parse_subrs): Assign number of subrs only
in first run.
(parse_charstrings): Parse /CharStrings in second run without
assigning values.
(parse_dict): Skip all /CharStrings arrays but the first. We need
this for non-standard fonts like `Optima' which have different
outlines depending on the resolution. Note that there is no
guarantee that we get fitting /Subrs and /CharStrings arrays; this
can only be done by a real PS interpreter.
(cff_get_name_index): Return if no PSNames service is available.
(cff_ps_has_glyph_names): Handle CID-keyed fonts correctly.
* src/cff/cfftypes.h (CFF_CharsetRec): New field `cids', used for
CID-keyed fonts. This is the inverse mapping of `sids'.
* src/cff/cffload.c (cff_charset_load): New argument `invert'.
Initialize charset->cids if `invert' is set.
(cff_font_load): In call to cff_charset_load, set `invert' to true
for CID-keyed fonts.
* src/cff/cffgload.c (cff_slot_load): Handle glyph index as CID
and map it to the real glyph index.
* docs/CHANGES: Updated.
of `lengths' to FT_PtrDist.
(T1_DecoderRec): Change type of `subrs_len' to FT_PtrDist.
* include/freetype/internal/t1types.h (T1_FontRec): Change type
of `subrs_len' and `charstrings_len' to FT_PtrDist.
* src/base/ftobjs.c (Mac_Read_POST_Resource): Replace `junk'
variable with better solution.
(IsMacResource): Remove unused variable `map_len'.
Replace `junk' variable with better solution.
(FT_Open_Face) [!FT_MACINTOSH]: Add conditional
FT_CONFIG_OPTION_MAC_FONTS.
* src/autohint/ahhint.c (ah_hinter_hint_edges,
ah_hinter_align_strong_points): Add some casts.
* src/base/ftoutln.c (FT_OrientationExtremumRec): Change type
of `pos' to FT_Long.
* src/base/ftobjs.c (Mac_Read_POST_Resource,
Mac_Read_sfnt_Resource): Change type of `len' to FT_Long.
* src/type42/t42parse.c (t42_parse_dict): Add cast for `n_keywords'.
* include/freetype/internal/cfftypes.h, src/cff/cfftypes.h,
src/cff/cffload.h, src/cff/cffobjs.h, src/cff/cffparse.h,
include/freetype/internal/services/svbdf.h: moving "cfftypes.h" from
'include/freetype/internal' to 'src/cff' since no other modules needs
to known about these types
* include/freetype/internal/t42types.h,
include/freetype/internal/internal.h, src/type42/t42objs.h,
src/type42/t42drivr.c, src/type42/t42types.h: moving "t42types.h" from
'include/freetype/internal' to 'src/type42' since no other modules needs
to known about these types
* src/gzip/infblock.c: removing compiler warning
* include/freetype/internal/services/svpsinfo.h,
include/freetype/internal/ftserv.h, src/cff/cffdrivr.c,
src/cid/ciddrivr.c, src/type1/t1driver.c, src/type42/t42drivr.c,
src/base/fttype1.c: migrating to FT_SERVICE_ID_POSTSCRIPT_INFO defined
in "svpsinfo.h", removing some sad hacks.
2003-08-18 introduced a severe bug (FT_Render_Glyph was called
twice under some circumstances, causing strange results). This
is fixed now by clearing the FT_LOAD_RENDER bit of `load_flags'.
* src/base/ftpfr.c (FT_Get_PFR_Metrics): Initialize `error'.
* src/psaux/psobjs.c (ps_tobytes): Initialize `n'.
* src/type42/t42parse.c (t42_parse_sfnts): Initialize `string_size'.
produced with ttftot42 (tested version 0.3.1) and
TrueTypeToType42.ps (tested version May 2001; it is necessary to
fix the broken header comment to be `%!PS-TrueTypeFont...').
* src/type42/t42objs.c (T42_GlyphSlot_Load): Change fourth
parameter to `FT_UInt'.
* src/type42/t42objs.h: Updated.
* src/type42/t42parse.h (T42_ParserRec): Change type of `in_memory'
to FT_Bool.
(T42_Loader): Change type of `num_chars' and `num_glyphs' to
FT_UInt.
Add `swap_table' element.
* src/type42/t42parse.c (T42_KEYWORD_COUNT, T1_ToFixed,
T1_ToCoordArray, T1_ToTokenArray): Removed.
(T1_ToBytes): New macro.
(t42_is_alpha, t42_hexval): Removed.
(t42_is_space): Handle `\0'.
(t42_parse_encoding): Updated to use new PostScript parser routines
from psaux.
Handle `/Encoding [ ... ]' also.
(T42_Load_Status): New enumeration.
(t42_parse_sfnts): Updated to use new PostScript parser routines
from psaux.
(t42_parse_charstrings): Updated to use new PostScript parser
routines from psaux.
Handle `/CharStrings << ... >>' also.
Don't expect that /.notdef is the first element in dictionary. Copy
code from type1 module to handle this.
(t42_parse_dict): Updated to use new PostScript parser routines
from psaux.
Remove code for synthetic fonts (which can't occur in Type 42
fonts).
(t42_loader_done): Release `swap_table'.
* src/psaux/psobjs.c (skip_string): Increase `cur' properly.
* src/type1/t1load.c (parse_charstrings): Make test for `.notdef'
faster.
correctly. This doesn't slow down the loading of PS fonts
significantly since charstrings aren't affected.
* include/freetype/config/ftstdlib.h (ft_xdigit): Renamed to...
(ft_isxdigit): This. Updated all callers.
(ft_isdigit): New alias to `isdigit'.
* include/freetype/internal/psaux.h (PS_Parser_FuncsRec): Renamed
`skip_alpha' to `skip_PS_token'.
Add parameter to `to_bytes' and change some argument types.
* src/psaux/psauxmod.c (ps_parser_funcs): Updated.
* src/psaux/psobjs.c (ft_char_table): New array to map character
codes (ASCII and EBCDIC) of digits to numbers.
(OP): New auxiliary macro holding either `>=' or `<' depending on
the character encoding.
(skip_comment): New function.
(skip_spaces): Use it.
(skip_alpha): Removed.
(skip_literal_string, skip_string): New functions.
(ps_parser_skip_PS_token): New function. This is a better
replacement of...
(ps_parser_skip_alpha): Removed.
(ps_parser_to_token, ps+parser_to_token_array): Updated.
(T1Radix): Rewritten, using `ft_char_table'.
(t1_toint): Renamed to...
(ps_toint): This. Update all callers.
Use `ft_char_table'.
(ps_tobytes): Add parameter to handle delimiters and change some
argument types.
Use `ft_char_table'.
(t1_tofixed): Renamed to...
(ps_tofixed): This. Update all callers.
Use `ft_char_table'.
(t1_tocoordarray): Renamed and updated to...
(ps_tocoordarray): This. Update all callers.
(t1_tofixedarray): Renamed and updated to...
(ps_tofixedarray): This. Update all callers.
(t1_tobool): Renamed to...
(ps_tobool): This. Update all callers.
(ps_parser_load_field): Updated.
(ps_parser_load_field_table): Use `T1_MAX_TABLE_ELEMENTS'
everywhere.
(ps_parser_to_int, ps_parser_to_fixed, ps_parser_to_coord_array,
ps_parser_to_fixed_array): Skip spaces. Updated.
(ps_parser_to_bytes): Add parameter to handle delimiters and change
some argument types. Updated.
* src/psaux/psobjs.h: Updated.
* src/cid/cidload.c (cid_parse_dict): Updated.
* src/cid/cidparse.c (cid_parser_new): Check whether the `StartData'
token was really found.
* src/cid/cidparse.h (cid_parser_skip_alpha): Updated and renamed
to...
(cid_parser_skip_PS_token): This.
* src/type1/t1parse.h (T1_ParserRec): Use `FT_Bool' for boolean
fields.
(T1_Skip_Alpha): Replaced with...
(T1_Skip_PS_Token): This new macro.
* src/type1/t1parse.c (hexa_value): Removed.
(T1_Get_Private_Dict): Use `ft_isxdigit' and
`psaux->ps_parser_funcs_to_bytes' for handling ASCII hexadecimal
encoding.
After decrypting, replace the four random bytes at the beginning
with whitespace.
* src/type1/t1load.c (t1_allocate_blend): Use proper error values.
(parser_blend_design_positions, parse_blend_design_map,
parse_weight_vector): Updated.
(is_space): Handle `\f' also.
(is_name_char): Removed.
(read_binary_data): Updated.
(parse_encoding): Use `ft_isdigit'.
Updated.
(parse_subrs): Updated.
(TABLE_EXTEND): New macro.
(parse_charstrings): Updated.
Provide a workaround for buggy fonts which have more entries in the
/CharStrings dictionary then expected; the function now adds some
slots and skips entries which still exceed the new limit.
(parse_dict): Updated.
Terminate on the token `closefile'.
* src/type42/t42parse.c (T1_Skip_Alpha): Replaced with...
(T1_Skip_PS_Token): This new macro. Updated all callers.
(t42_parse_encoding): Use `ft_isdigit'.
* src/base/ftmm.c (ft_face_get_mm_service): Return FT_Err_OK if
success.
include/freetype/internal/psnames.h (removed),
include/freetype/internal/internal.h (FT_SERVICE_POSTSCRIPT_NAMES):
added new service to handle glyph name dictionaries, replacing
the old internal header named "psnames.h" by "services/svpsname.h"
note that this is different from "services/svpostnm.h" which only
handles the retrieval of Postscript font name for a given face.
(should we merge these two services into a single header ??)
* include/freetype/internal/ftserv.h: adding
FT_FACE_FIND_GLOBAL_SERVICE (used to lookup a service globally,
instead of only within the current module)
* include/freetype/internal/ftobjs.h, src/base/ftobjs.c: adding
the new base function ft_module_get_service
include/freetype/internal/service/svpfr.h,
include/freetype/internal/pfr.h,
src/base/ftpfr.c:
migrating the functions of "ftpfr.h" to the new
service-base internal API
* src/cff/cffobjs.c, src/cid/cidobjs.c, src/pfr/pfrsbit.c,
src/psaux/psobjs.c, src/sfnt/sfdriver.c, src/sfnt/sfobjs.c,
src/truetype/ttobjs.c, src/type1/t1driver.c, src/type1/t1objs.c,
src/type42/t42objs.c, src/winfonts/winfnt.c:
removing various compiler warnings
* src/pfr/pfrdrivr.c: Include `pfrerror.h'.
* src/sfnt/sfdriver.c: Include `sferrors.h'.
* src/psaux/psobjs.h: Add declaration for `ps_parser_to_bytes'.
* src/tools/docmaker/tohtml.py (html_header_1): Add doctype
and charset.
(html_header_2): Fix style elements and add some more.
Fix syntax.
(block_header, block_footer, description_header, description_footer,
marker_header, marker_footer, source_header, source_footer,
chapter_header, chapter_footer): Don't use <center>...</center> but
`align=center' table attribute.
Use double quotes around table widths given in percent.
(keyword_prefix, keyword_suffix): Don't change font colour directly
but use a new <span> class.
(section_synopsis_header, section_synopsis_footer): Don't change
colour.
(print_html_field): <tr> gets the `valign' attribute, not <table>.
(print_html_field_list): Ditto.
(index_exit): Don't use <center>...</center> but `align=center'
table attribute.
(toc_exit, section_enter): Ditto.
(block_enter): Use <h4><a>, not <a><h4>.
This change reimplements fix from 2003-05-30 without breaking
binary compatibility.
* include/freetype/t1tables.h (PS_FontInfoRec): `italic_angle',
`is_fixed_pitch', `underline_position', `underline_thickness' are
reverted to be normal values.
* include/freetype/internal/psaux.h (T1_FieldType): Remove
`T1_FIELD_TYPE_BOOL_P', `T1_FIELD_TYPE_INTEGER_P',
`T1_FIELD_TYPE_FIXED_P', `T1_FIELD_TYPE_FIXED_1000_P'.
(T1_FIELD_TYPE_BOOL_P, T1_FIELD_NUM_P, T1_FIELD_FIXED_P,
T1_FIELD_FIXED_1000_P): Removed.
(T1_FIELD_TYPE_BOOL): Renamed to...
(T1_FIELD_BOOL): New macro. Updated all callers.
* src/type42/t42parse.c: `italic_angle', `is_fixed_pitch',
`underline_position', `underline_thickness', `paint_type',
`stroke_width' are reverted to be normal values.
(T42_KEYWORD_COUNT): New macro.
(t42_parse_dict): New array `keyword_flags' to mark that a value has
already been assigned to a dictionary entry.
* src/type42/t42objs.c (T42_Face_Init, T42_Face_Done): Updated.
* src/cid/cidtoken.h: `italic_angle', `is_fixed_pitch',
`underline_position', `underline_thickness' are reverted to be
normal values.
* src/cid/cidobjs.c (cid_face_done, cid_face_init): Updated.
* src/psaux/psobjs.c (ps_parser_load_field): Updated.
* src/type1/t1tokens.h: `italic_angle', `is_fixed_pitch',
`underline_position', `underline_thickness', `paint_type',
`stroke_width' are reverted to be normal values.
* src/type1/t1objs.c (T1_Face_Done, T1_Face_Init): Updated.
* src/type1/t1load.c (T1_FIELD_COUNT): New macro.
(parse_dict): Add parameter for keyword flags.
Record only first instance of a field.
(T1_Open_Face): New array `keyword_flags'.
member function `to_bytes'.
* src/psaux/psauxmod.c (ps_parser_funcs): New member
`ps_parser_to_bytes'.
(psaux_module_class): Increase version to 0x20000L.
* src/psaux/psobjs.c (IS_T1_LINESPACE): Add \f.
(IS_T1_NULLSPACE): New macro.
(IS_T1_SPACE): Add it.
(skip_spaces, skip_alpha): New functions.
(ps_parser_skip_spaces, ps_parser_skip_alpha): Use them.
(ps_tobytes, ps_parser_to_bytes): New functions.
computation of glyph_index.
(FNT_Size_Set_Pixels): To find a strike, first check pixel_height
only, then try to find a better hit by comparing pixel_width also.
Without this fix it isn't possible to access all strikes.
Also compute metrics.max_advance to be in sync with other bitmap
drivers.
* src/base/ftobjs.c (FT_Set_Char_Size): Remove redundant code.
(FT_Set_Pixel_Size): Assign value to `metrics' after validation of
arguments.
Synchronize computation of height and width for bitmap strikes. The
`width' field in the FT_Bitmap_Size structure is now only useful to
enumerate different strikes. The `max_advance' field of the
FT_Size_Metrics structure should be used to get the (maximum) width
of a strike.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Don't use AVERAGE_WIDTH for
computing `available_sizes->width' but make it always equal to
`available_sizes->height'.
* src/pcf/pcfread.c (pcf_load_font): Don't use RESOLUTION_X for
computing `available_sizes->width' but make it always equal to
`available_sizes->height'.
* src/truetype/ttdriver.c (Set_Pixel_Sizes): Pass only single
argument to function.
* src/psnames/psmodule.c (ps_unicode_value): Handle `.' after
`uniXXXX' and `uXXXX[X[X]]'.
* src/bdf/bdfdrivr.c: s/FT_Err_/BDF_Err/.
* src/cache/ftccache.c, src/cache/ftcsbits.c, src/cache/ftlru.c:
s/FT_Err_/FTC_Err_/.
* src/cff/cffcmap.c: s/FT_Err_/CFF_Err_/.
* src/pcf/pcfdrivr.c: s/FT_Err_/PCF_Err_/.
* src/psaux/t1cmap.c: Include psauxerr.h.
s/FT_Err_/PSaux_Err_/.
* src/pshinter/pshnterr.h: New file.
* src/pshinter/rules.mk: Updated.
* src/pshinter/pshalgo.c, src/pshinter/pshrec.c: Include pshnterr.h.
s/FT_Err_/PSH_Err_/.
* src/pfr/pfrdrivr.c, src/pfr/pfrobjs.c, src/pfr/pfrsbit.c:
s/FT_Err_/PFR_Err_/.
* src/sfnt/sfdriver.c, src/sfnt/sfobjs.c, src/sfnt/ttcmap0.c,
src/sfnt/ttload.c: s/FT_Err_/SFNT_Err_/.
* src/truetype/ttgload.c: s/FT_Err_/TT_Err_/.
* src/gzip/ftgzip.c: Load FT_MODULE_ERRORS_H and define
FT_ERR_PREFIX and FT_ERR_BASE.
s/FT_Err_/Gzip_Err_/.
ft_glyph_bbox_subpixels, ft_glyph_bbox_gridfit,
ft_glyph_bbox_truncate, ft_glyph_bbox_pixels): Replaced with
FT_GLYPH_BBOX_UNSCALED, FT_GLYPH_BBOX_SUBPIXELS,
FT_GLYPH_BBIX_GRIDFIT, FT_GLYPH_BBOX_TRUNCATE, FT_GLYPH_BBOX_PIXELS.
The lowercase variants are now (deprecated aliases) to the uppercase
versions.
Updated all other files.
* include/freetype/ftmodule.h (ft_module_font_driver,
ft_module_renderer, ft_module_hinter, ft_module_styler,
ft_module_driver_scalable, ft_module_driver_no_outlines,
ft_module_driver_has_hinter): Replaced with FT_MODULE_FONT_DRIVER,
FT_MODULE_RENDERER, FT_MODULE_HINTER, FT_MODULE_STYLER,
FT_MODULE_DRIVER_SCALABLE, FT_MODULE_DRIVER_NO_OUTLINES,
FT_MODULE_DRIVER_HAS_HINTER.
The lowercase variants are now (deprecated aliases) to the uppercase
versions.
Updated all other files.
* src/base/ftglyph.c (FT_Glyph_Get_CBox): Handle bbox_mode better
as enumeration.
* src/pcf/pcfdrivr.c (pcf_driver_class), src/winfonts/winfnt.c
(winfnt_driver_class), src/bdf/bdfdrivr.c (bdf_driver_class): Add
the FT_MODULE_DRIVER_NO_OUTLINES flag.
T1_FIELD_TYPE_KEY.
(T1_FIELD_KEY): New macro.
* src/psaux/psobjs.c (ps_parser_load_field): Handle
T1_FIELD_TYPE_KEY.
* src/cid/cidtoken.h: Use T1_FIELD_KEY for /CIDFontName.
* src/cache/ftlru.c (FT_LruList_Remove_Selection): Decrease
number of nodes.
(FT_LruList_Lookup): Fix assertion for out-of-memory case.
. In all makefiles `/' is used as the path separator. The
conversion to the real path separators is done as late as
possible using $(subst ...).
. $(HOSTSEP) no longer exists. Now, $(SEP) gives the path separator
for the operating system, and the new $(COMPILER_SEP) the path
separator for the compiler tools.
. $(BUILD) has been renamed to $(BUILD_DIR). In general, all
directory variables end with `_DIR'. The variants ending in `_'
(like `BASE_' have been removed).
The following ChangeLog entries only describe changes which are
not related to the redesign.
* builds/beos/beos-def.mk (BUILD_DIR): Fix typo.
* builds/compiler/watcom.mk (LINK_LIBRARY): Fix linker call to avoid
overlong arguments as suggested by J. Ali Harlow
<ali@avrc.city.ac.uk>.
* builds/dos/dos-wat.mk: New file.
* builds/freetype.mk (FREETYPE_H): Include header files from the
`devel' subdirectory.
* builds/os2/os2-dev.mk, builds/unix/unixddef.mk,
builds/unix/unixddef.mk, builds/win32/w32-bccd.mk,
builds/win32/w32-dev.mk (BUILD_DIR): Fix path.
* builds/unix/configure.ac, builds/unic/configure: Updated.
* builds/unix/unix-def.in (DISTCLEAN): Add `freetype2.pc'.
* devel/ftoption.h: Updated.
T1_FIELD_TYPE_FIXED_1000 and T1_FIELD_TYPE_FIXED_1000_P.
(T1_FIELD_FIXED_1000, T1_FIELD_FIXED_1000_P): New macros.
* src/psaux/psobjs.c (ps_parser_load_field): Handle
T1_FIELD_TYPE_FIXED_1000 and T1_FIELD_TYPE_FIXED_1000_P.
* src/cff/cffparse.c (cff_kind_fixed_thousand): New enumeration.
(CFF_FIELD_FIXED_1000): New macro.
(cff_parser_run): Handle cff_kind_fixed_thousand.
* src/cff/cfftoken.h: Use CFF_FIELD_FIXED_1000 for blue_scale.
* src/cff/cffload (cff_subfont_load): Fix default values of
expansion_factor and blue_scale.
* src/cif/cidtoken.h, src/type1/t1tokens.h: Use T1_FIELD_FIXED_1000
for blue_scale.
* src/pshinter/pshglob.c (psh_globals_new): Fix default value of
blue_scale.
include/freetype/internal/ftobjs.h,
include/freetype/internal/psaux.h, src/cid/cidgload.c,
src/psaux/psobjs.c, src/psaux/t1decode.c, src/psaux/psobjs.h,
src/pshinter/pshrec.c, src/pshinter/pshalgo.c,
src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfobjs.c,
src/smooth/ftgrays.c, src/smooth/ftsmooth.c, src/truetype/ttobjs.c,
src/truetype/ttdriver.c, src/truetype/ttgload.c, src/type1/t1afm.c,
src/type1/t1gload.c, src/type1/t1gload.h, src/type1/t1load.c,
src/type1/t1objs.c, src/type42/t42parse.c, src/type42/t42parse.h:
Many casts and slight argument type changes to make it work with
a 16bit compiler.
wrapper for ah_hint_edges.
(ah_hint_edges): Renamed to...
(ah_hinter_hint_edges): This.
* src/base/ftobjs.c (FT_Set_Hint_Flags): Removed. Unused.
* include/freetype/internal/ftobjs.h (FT_Face_InternalRec),
include/freetype/internal/psaux.h (T1_DecoderRec),
src/cff/cffgload.h (CFF_Builder): Remove `hint_flags' field.
Unused.
* src/cff/cffgload.c (cff_builder_init): Updated.
(cff_decoder_parse_charstrings) <cff_op_endchar>: Call hinter->apply
with decoder->hint_mode instead of builder->hint_flags.
* src/psaux/t1decode.c (t1_decoder_init): Updated.
* src/base/ftstroker.c (ft_stroke_border_export): s/index/idx/.
* src/sfnt/sfobjs.c (sfnt_load_face): Commented out code which
increased root->height by 15% if the line gap was zero. There exist
fonts (containing e.g. form drawing characters) which intentionally
have a zero line gap value.
fonts. Additionally, some entries were handled as `integer' instead
of `number'.
* include/freetype/internal/psaux.h (T1_FieldType): Add
T1_FIELD_TYPE_BOOL_P, T1_FIELD_TYPE_INTEGER_P, and
T1_FIELD_TYPE_FIXED_P.
(T1_FIELD_BOOL_P, T1_FIELD_NUM_P, T1_FIELD_FIXED_P): New macros.
* src/psaux/psobjs.c (ps_parser_load_field): Handle new field types.
* include/freetype/internal/cfftypes.h (CFF_FontRecDict),
src/cff/cfftoken.h: Change type of underline_position and
underline_thickness to FT_Fixed.
* src/cff/cffload.c (cff_subfont_load): Fix default values of
underline_position and underline_thickness.
* src/cff/cffobjs.c (cff_face_init): Set underline_position
and underline_thickness in `root'.
* include/freetype/internal/t1types.h (T1_Font): Change point_type
and stroke_width to pointers.
* include/freetype/t1tables.h (PS_FontInfo): Change italic_angle,
is_fixed_pitch, underline_position, and underline_thickness to
pointers.
* src/type1/t1tokens.h: Change italic_angle, is_fixed_pitch,
underline_position, and underline_thickness to pointers. Change
the type of the latter two to `fixed'.
Change type of stroke_width to `fixed' and make it a pointer.
Change paint_type to pointer.
* src/type1/t1objs.c (T1_Face_Done): Updated.
(T1_Face_Init): Updated.
Fix assignment of underline_position and underline_thickness.
* src/cid/cidtoken.h: Change italic_angle, is_fixed_pitch,
underline_position, and underline_thickness to pointers. Change
the type of the latter two to `fixed'.
Change type of stroke_width to `fixed'.
* src/cid/cidobjs.c (cid_face_done): Updated.
(cid_face_init): Updated.
Fix assignment of underline_position and underline_thickness.
* src/type42/t42parse.c: Change italic_angle, is_fixed_pitch,
underline_position, and underline_thickness to pointers. Change the
type of the latter two to `fixed'.
Change type of stroke_width to `fixed' and make it a pointer.
Change paint_type to pointer.
* src/type42/t42objs.c (T42_Face_Init): Updated.
Fix assignment of underline_position and underline_thickness.
(T42_Face_Done): Updated.
* src/base/ftobjs.c (open_face_from_buffer): Fix compiler warning.
* src/pshinter/pshglob.c, src/pshinter/pshglob.h
(psh_globals_set_scale): Make it a local function.
* test/gview.c: Fix remaming ps3->ps typo.
Formatting.
to control memory debugging with FreeType. See the description of
"FT2_DEBUG_MEMORY", "FT2_ALLOC_TOTAL_MAX" and "FT2_ALLOC_COUNT_MAX"
in DEBUG.TXT
* src/cache/ftccache.c, src/cache/ftccmap.c, src/cache/ftcsbits.c,
ftlru.c: fixed the cache sub-system to correctly deal with out-of-memory
conditions.
* src/pfr/pfrobjs.c, src/pfr/pfrsbits.c: fixing compiler warnings and a
small memory leak
* src/psaux/psobjs.c (t1_reallocate_table): fixed a bug (memory leak) that
only happened when trying to resize an array would end in an OOM.
* src/smooth/ftgrays.c: removed compiler warnings / volatile bug
* src/truetype/ttobjs.c: removed segmentation fault that happened in
tight memory environments.
* include/freetype/config/ftoption.h, src/gzip/ftgzip.c: added
support for the FT_CONFIG_OPTION_SYSTEM_ZLIB option, used to specify
the use of system-wide zlib.
Note that this macro, as well as FT_CONFIG_OPTION_BYTECODE_INTERPRETER,
is not #undef-ed anymore. This allows the build system to define them
depending on the configuration (typically by adding -D flags at
compile time).
* src/sfnt/ttcmap0.c (tt_face_build_cmaps): removed compiler warnings
in optimized mode relative to the "volatile" local variables. This was
not a compiler bug after all, but the fact that a pointer to a volatile
variable is not the same than a volatile pointer to a variable :-)
the fix was to change "volatile FT_Byte* p"
into "FT_Byte* volatile p"
* src/pfr/pfrload.c, src/pfr/pfrdrivr.c, src/gzip/inftrees.c: removed
compiler warnings in optimized modes
* src/gzip/*.[hc]: modified our ZLib copy in order to prevent exporting
any zlib function names outside of the component. This prevents linking
problems on some platforms, when applications want to link FreeType
_and_ ZLib together.
2002-11-05 Juliusz <jch@pps.jussieu.fr>
* src/psaux/psobjs.c (ps_table_add): modified increment loop in
order to implement exponential behaviour
tt_face_get_ps_name): Replace switch statement with if clauses to
make it more portable.
* src/cff/cffobjs.c (cff_face_init): Ditto.
* include/freetype/ftmodule.h (FT_Module_Class): Use `FT_Long' for
`module_size'.
* include/freetype/ftrender.h (FT_Glyph_Class_): Use `FT_Long' for
`glyph_size'.
* src/base/ftobjs.c (FT_Render_Glyph): Change second parameter to
`FT_Render_Mode'.
(FT_Render_Glyph_Internal): Change third parameter to
`FT_Render_Mode'.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Change second parameter
to `FT_Render_Mode'.
* src/raster/ftrend1.c (ft_raster1_render): Change third parameter
to `FT_Render_Mode'.
* src/smooth/ftsmooth.c (ft_smooth_render, ft_smooth_render_lcd,
ft_smooth_render_lcd_v): Ditto.
(ft_smooth_render_generic): Change third and fifth parameter to
`FT_Render_Mode'.
* include/freetype/freetype.h, include/freetype/internal/ftobjs.h,
include/freetype/ftglyph.h: Updated.
* src/cff/cffdrivr.c (Load_Glyph), src/pcf/pcfdriver.c
(PCF_Glyph_Load), src/pfr/pfrobjs.c (pfr_slot_load),
src/winfonts/winfnt.c (FNT_Load_Glyph), src/t42/t42objs.c
(T42_GlyphSlot_Load), src/bdf/bdfdrivr.c (BDF_Glyph_Load): Change
fourth parameter to `FT_Int32'.
* src/pfr/pfrobjs.c (pfr_face_init): Add two missing parameters
and declare them as unused.
* src/cid/cidparse.h (CID_Parser): Use FT_Long for `postscript_len'.
* src/psnames/psnames.h (PS_Unicode_Value_Func): Change return
value to FT_UInt32.
* src/psnames/psmodule.c (ps_unicode_value, ps_build_unicode_table):
Updated accordingly.
* src/cff/cffdrivr.c (Get_Kerning): Use FT_Long for `middle'.
(cff_get_glyph_name): Use cast for result of ft_strlen.
* src/cff/cffparse.c (cff_parse_real): User cast for assigning
`exp'.
* src/cff/cffload.c (cff_index_get_pointers): Use FT_ULong for
some local variables.
(cff_charset_load, cff_encoding_load): Use casts to FT_UInt for some
switch statements.
(cff_font_load): Use cast in call to CFF_Load_FD_Select.
* src/cff/cffobjs.c (cff_size_init): Use more casts.
(cff_face_init): Use FT_Int32 for `flags'.
* src/cff/cffgload.c (cff_operator_seac): Use cast for assigning
`adx' and `ady'.
(cff_decoder_parse_charstrings): Use FT_ULong for third parameter.
Use more casts.
* src/cff/cffcmap.c (cff_cmap_unicode_init): Use cast for `count'.
* src/cid/cidload.c (cid_read_subrs): Use FT_ULong for `len'.
* src/cid/cidgload.c (cid_load_glyph): Add missing cast for
`cid_get_offset'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings) <18>: Use
cast for `num_points'.
(t1_decoder_init): Use cast for assigning `decoder->num_glyphs'.
* src/base/ftdebug.c (ft_debug_init): Use FT_Int.
* include/freetype/internal/ftdriver.h (FT_Slot_LoadFunc): Use
`FT_Int32' for fourth parameter.
* src/base/ftobjs.c (open_face): Use cast for calling
clazz->init_face.
* src/raster/ftraster.c (Set_High_Precision): Use `1' instead of
`1L'.
(Finalize_Profile_Table, Line_Up, ft_black_init): Use casts.
* src/raster/ftrend1.c (ft_raster1_render): Ditto.
* src/sfnt/sfnt_dir_check: Compare `magic' with unsigned long
constant.
* builds/amiga/include/freetype/config/ftmodule.h: Updated.
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
src/psaux/psobjs.c, src/type1/t1load.c, src/type1/t1tokens.h:
fixing a bug in the Type 1 loader that prevented valid font bounding
boxes to be loaded from multiple master fonts.
freetype/internal/ftobjs.h, freetype/internal/psaux.h,
freetype/internal/pshints.h, src/psaux/t1decode.c, src/cff/cffgload.h,
src/cff/cffgload.c, src/pshinter/pshalgo1.h, src/pshinter/pshalgo1.c,
src/pshinter/pshalgo2.h, src/pshinter/pshalgo2.c, src/pshinter/pshalgo3.h,
src/pshinter/pshalgo3.c: Adding support for hinter-specific bit flags,
and the new FT_Set_Hint_Flags high-level API
t1_cmap_custom_char_next): Fix index computation -- indices start
with 0 and not with cmap->first.
Provide default charmaps.
* src/bdf/bdfdrivr.c (BDF_Face_Init), src/pcf/pcfdriver.c
(PCF_Face_Init), src/pfr/pfrobjs.c (pfr_face_init),
src/type1/t1objs (T1_Face_Init), src/winfonts/winfnt.c
(FNT_Face_Init): Implement it.
(t1_toint): Use it to handle numbers in radix format.
* src/psaux/t1decode.c (T1_Decoder_Parse_Charstrings): Add dummy
for undocumented, obsolete opcode 15.
warn about the GNU Make requirement at compile time..
* include/freetype/config/ftstdlib.h,
include/freetype/config/ftconfig.h,
include/freetype/config/ftheader.h,
include/freetype/internal/ftmemory.h,
include/freetype/internal/ftobjs.h,
src/autohint/ahoptim.c,
src/base/ftdbgmem.c, src/base/ftdebug.c,
src/base/ftmac.c, src/base/ftobjs.c,
src/base/ftsystem.c,
src/cache/ftcimage.c, src/cache/ftcsbits.c,
src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c,
src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c,
src/pcf/pcfdriver.c, src/pcf/pcfread.c,
src/psaux/t1cmap.c, src/psaux/t1decode.c,
src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c,
src/pshinter/pshrec.c,
src/psnames/psmodule.c,
src/raster/ftraster.c,
src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c,
src/smooth/ftgrays.c,
src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c,
src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c:
added the new configuration file "ftstdlib.h" used to define
aliases for all ISO C library functions used by the engine
(e.g. strlen, qsort, setjmp, etc...)
this eases the porting of FreeType 2 to exotic environments like
XFree86 modules/extensions..
also removed many #include <string.h>, #include <stdlib.h>, etc...
from the engine's sources where they're not needed..
changed the names of memory macros. Examples:
MEM_Set => FT_MEM_SET
MEM_Copy => FT_MEM_COPY
MEM_Move => FT_MEM_MOVE
ALLOC => FT_ALLOC
FREE => FT_FREE
REALLOC = >FT_REALLOC
FT_NEW was introduced to allocate a new object from a _typed_
pointer..
note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced
by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer
arguments.
This results in _lots_ of sources being changed, but makes the
code more generic and less error-prone..
src/type1/t1cmap.c: updating and moving the Type 1 FT_CMap support
from "src/type1" to "src/psaux" since it's going to be shared
by the Type 1 and CID font drivers..
* src/psaux/Jamfile, src/psaux/psaux.c, src/psaux/psauxmod.c,
src/psaux/rules.mk, include/freetype/internal/psaux.h: added support
for Type 1 FT_CMaps.
been touched, while keeping everything backwards-compatible..
* include/freetype/t1tables.h: re-naming structure types. This done
basically:
typedef T1_Struct_
{
} T1_Struct;
becomes:
typedef PS_StructRec_
{
} PS_StructRec, *PS_Struct;
typedef PS_StructRec T1_Struct; /* backwards-compatibility */
hence, we increase the coherency of the source code by effectuively
using the 'Rec' prefix for structure types..
src/pshinter/ahalgo2.c, src/pshinter/pshglob.h: fixed a bug where
the X and Y axis where inversed in the postscript hinter. this
caused problem when displaying on non-square surfaces..
- reallocation bug in T1_Table_Add
- increased accuracy of units per EM computation in T1 fonts
- support "+" as valid font name character (used in embedded fonts)
`cursor' and `capacity'.
* src/psaux/psobjc.c (reallocate_t1_table): Use FT_Long for second
parameter.
(PS_Table_Add): Use FT_Offset for `new_size'.
* src/base/ftsynth.c: Include ftcalc.h unconditionally.
instead of FT_Int as type for `length' parameter.
* include/freetype/internal/psaux.h (PSAux_Interface): Updated.
* src/psaux/psobjs.c, src/psaux/psobjs.h (T1_Decrypt): Use FT_Offset
instead of FT_Int as type for `length' parameter.
by introducing another layer.
* include/freetype/fterrors.h (FT_ERRORDEF_, FT_NOERRORDEF_): New
macros.
(FT_NOERRORDEF): Removed.
* include/*/*err*.h: Use FT_ERRORDEF_ and FT_NOERRORDEF_.
details.
* include/freetype/internal/cfferrs.h,
include/freetype/internal/tterrors.h,
include/freetype/internal/t1errors.h: Removed. Replaced with files
local to the module. All extra error codes have been moved to
`fterrors.h'.
* src/sfnt/ttpost.h: Move error codes to `fterrors.h'.
* src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h,
src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h,
src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h,
src/smooth/ftsmerrs.h, src/truetype/tterrors.h,
src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the
error names for the module it belongs to.
* include/freetype/ftmoderr.h: New file, defining the module error
offsets. Its structure is similar to `fterrors.h'.
* include/freetype/fterrors.h (FT_NOERRORDEF): New macro.
(FT_ERRORDEF): Redefined to use module error offsets.
All internal error codes are now public; unused error codes have
been removed, some are new.
* include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New
macro.
* include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro.
All other source files have been updated to use the new error codes;
some already existing (internal) error codes local to a module have
been renamed to give them the same name as in the base module.
All make files have been updated to include the local error files.
* src/cid/cidtokens.h: Replaced with...
* src/cid/cidtoken.h: This file for 8+3 consistency.
* src/raster/ftraster.c: Use macros for header file names.
the structure of similar makefiles.
* builds/dos/*.mk: Ditto.
* builds/ansi/*.mk: Ditto.
* builds/win32/win32-def.mk (BUILD): Fix typo.
* builds/compiler/*.mk (CLEAN_LIBRARY): Don't use NO_OUTPUT.
This is already used in the link_*.mk files.
* src/*/Jamfile: Slight changes to make files more cryptic.
* include/freetype/config/ftheader.h: removed obsolete macros like
FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that
were previously defined in <freetype/ftcache.h>. Added comments to be
included in a new API Reference section.
* src/*/*: removed the use of FT_SOURCE_FILE, etc.. now, each component
needs to added its own directory to the include path at compile time.
Modified all "rules.mk" and "descrip.mms" accordingly..
include/freetype/internal/internal.h: fixed header inclusion macros
to use direct definitions. This is the only way to do these things
in a portable way :-( The rest of the code should follow shortly
though everything compiles now..
* builds/compiler/intelc.mk, builds/compiler/watcom.mk,
builds/win32/detect.mk: added support for the Intel C/C++ compiler,
as well as _preliminary_ (read: doesn't work !!) support for Watcom.
Also added a new setup target. Type "make setup list" for a list
of supported command-line compilers on Win32..
Removed. ANSI C doesn't (explicitly) allow macro expansion in
arguments using `##'.
(FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE): Use directory
names directly. Make them configurable. Use `##' to strip leading
and trailing spaces from arguments.
* builds/unix/ft2unix.h: Adapted.
* src/base/ftsystem.c (ft_alloc, ft_realloc, ft_free, ft_io_stream,
ft_close_stream): Use FT_CALLBACK_DEF.
* builds/unix/ftsystem.c: Use new header scheme.
(FT_Done_Memory): Use free() from FT_Memory structure.
* src/base/ftinit.c, src/base/ftmac.c: Header scheme fixes.
* include/freetype/config/ft2build.h (FT2_CONFIG_ROOT,
FT2_PUBLIC_FILE, FT2_CONFIG_FILE, FT2_INTERNAL_FILE,
FT_SOURCE_FILE): Use `##' operator to be really ANSI C compliant.
`__' (those which haven't converted yet). Fixed minor conversion
issues.
* src/winfonts/winfnt.c: Updated to new header inclusion scheme.
* */*.[ch]: Changed source files to adhere to the new
* src/cff/cff.c, src/cff/rules.mk: Updated.
* */*.[ch]: Now using <ft2build.h> as the default build and setup
* builds/os2/detekt.mk, builds/win32/detekt.mk: Moved comment to
avoid trailing spaces in variable.
* builds/freetype.mk: Use $(D) instead of $D to make statement more
readable.
* docs/docmaker.py: Formatting.
* src/psaux/psauxmod.c: Fixed a broken inclusion of component
header files (an FT_FLAT_COMPILE test was missing).
* src/cache/ftcmanag.c (FTC_Manager_Done): Fixed a bug that caused
an occasional crash when the function was called (due to a dangling
pointer).
* src/base/ftsystem.c (FT_Done_Memory): Fixed an obvious bug:
The ANSI "free()" function was called instead of "memory->free()".
* docs/docmaker.py: Added section filtering, multi-page generation
(index page generation is still missing though).
* builds/unix/install.mk, builds/unix/ft2unix.h: The file "ft2unix.h"
is now installed as <ft2build.h> for Unix systems. Note that we
still use the "freetype2/freetype" installation path for now.
* many files: Now using <ft2build.h> as the default build and setup
configuration file in all public headers. Internal source files
still need some changes though.
* builds/devel/ft2build.h, builds/devel/ftoption.h: Created a new
Win32 developer builds.
builds/win32/w32-dev.mk: Changed the developer build targets to
"devel-gcc" and "devel-bcc" in order to be able to develop with the
Borland C++ compiler.
objects:
FT_Face_Internal, FT_Size_Internal, FT_Slot_Internal
these contain some fields that may change between releases
of FreeType, without affecting the size of FT_FaceRec,
FT_SizeRec, FT_GlyphSlotRec, etc.., which means that
drivers wouldn't need to be recompiled if we only add new
fields to an internal structure..
I plan to hack a few things related to the auto-hinter and
I need this move to ensure that we will not break binary
compatibility between 2.0 and 2.1 :-)
- David
Fixed some data types/added header files to remove compiler warnings.
Added trivial input data check to FT_Outline_Get_BBox().
Fixed type1z -> type1 file inclusions.
The Type 1 driver now completely relies on "psaux". I
now need to change the CID driver accordingly, then
finally move the Type 2 parsing routines to "psaux"
when appropriate..
Werner, please do not start re-formatting my experimental
code until I declare it "finished", because I still make big
changes to it that create lots of CVS conflicts..
thanks for your work, anyway :-)
Werner Lemberg