* src/smooth/ftgrays.c [STANDALONE_]: Duplicate `FT_Outline_Get_CBox'.
(gray_compute_cbox): Remove this function.
(gray_convert_glyph): Update to use `FT_Outline_Get_CBox'.
The convergence of Bézier flatteners is fast with the deviation
from straight line being assymptotically cut 4-fold on each bisection.
This justifies smaller bisection stack size.
* src/smooth/ftgrays.c (gray_TWorker): Remove common `bez_stack'.
(gray_render_conic): Create and use conic `bez_stack'. Move back the
band analysis from...
(gray_conic_to): ... here.
(gray_render_cubic): Create and use cubic `bez_stack'. Move back the
band analysis from...
(gray_cubic_to): ... here.
(gray_move_to): Updated.
A single decrement counter of segments to draw, instead of an array,
contains all the information necessary to decide when to split and
when to draw a conic segment. The number of splits before each draw is
equal to the number of trailing zeros in the counter.
* src/smooth/ftgrays.c (gray_TWorker): Remove `lev_stack'.
(gray_render_conic): Updated to use decrement counter of segments.
* src/smooth/ftgrays.c (gray_render_conic, gray_render_cubic): Move
band clipping from here.
(gray_conic_to, gray_cubic_to): ... to here.
(gray_rander_line, gray_render_scanline): Initialize variables closer
to their use.
Such macro names are reserved for both C and C++.
* include/freetype/ftimage.h, src/raster/ftraster.c,
src/smooth/ftgrays.c, src/smooth/ftgrays.h:
s/_STANDALONE_/STANDALONE_/.
This implementation renders the entire line segment at once without
subdividing it into scanlines. The main speed improvement comes from
reducing the number of divisions to just two per line segment, which
is a bare minimum to calculate cell coverage in a smooth rasterizer.
Notably, the progression from cell to cell does not itself require any
divisions at all. The speed improvement is more noticeable at larger
sizes.
* src/smooth/ftgrays.c (gray_render_line): New implementation.
See
http://lists.nongnu.org/archive/html/freetype-devel/2015-07/msg00008.html
for a rationale.
* src/autofit/afpic.h, src/base/basepic.h, src/cff/cffpic.h,
src/pshinter/pshpic.h, src/psnames/pspic.h, src/raster/rastpic.h,
src/sfnt/sfntpic.h, src/smooth/ftspic.h, src/truetype/ttpic.h
(FT_BEGIN_HEADER, FT_END_HEADER): Move macro calls to not enclose
header files that contain FT_{BEGIN,END}_HEADER macros by
themselves.
* src/autofit/aftypes.h [FT_DEBUG_AUTOFIT]: Include
FT_CONFIG_STANDARD_LIBRARY_H earlier.
* src/truetype/ttpic.h: Include FT_INTERNL_PIC_H.
This change is a result of a discussion thread on freetype-devel
http://lists.nongnu.org/archive/html/freetype-devel/2015-06/msg00041.html
Re-introduce the `freetype2' subdirectory for all FreeType header
files after installation, and rename the `freetype2' subdirectory in
the git repository to `freetype'.
* include/freetype2: Renamed to...
* include/freetype: This.
* CMakeLists.txt (PUBLIC_HEADERS, PUBLIC_CONFIG_HEADERS,
PRIVATE_HEADERS): Updated.
Update creation of `ftconfig.h'.
Install generated `ftconfig.h'.
* Jamfile (HDRMACRO, RefDoc), autogen.sh: Updated.
* builds/amiga/include/config/ftconfig.h, builds/freetype.mk
(PUBLIC_DIR), builds/symbian/bld.inf, builds/toplevel.mk (work),
builds/unix/freetype2.in: Updated.
* builds/unix/freetype-config.in: Updated.
* builds/unix/configure.raw: Don't check for `rmdir'.
* builds/unix/unix-def.in (DELDIR): Use `rm -rf', which is portable
according to the autoconf info manual.
* builds/unix/install.mk (install, uninstall,
distclean_project_unix): Update and simplify.
* builds/wince/*, builds/windows/*: Updated.
* devel/ft2build.h, include/ft2build.h: Updated.
* include/freetype2/config/ftheader.h,
include/freetype2/internal/ftserv.h,
include/freetype2/internal/internal.h: Update all header file
macros.
* src/tools/chktrcmp.py (TRACE_DEF_FILES): Updated.
* docs/*: Updated.
We no longer `pollute' the namespace of possible header file names;
instead we move `ft2build.h' up by one level so that it gets
installed in the default include directory (e.g.,
/usr/local/include). After this commit, only `ft2build.h' stays in
the compiler's include path.
No visible changes for the user who follows the standard FreeType
header inclusion rules.
* include/*: Move to ...
* include/freetype2/*: This directory, except `ft2build.h'.
* CMakeLists.txt (PUBLIC_HEADERS, PUBLIC_CONFIG_HEADERS,
PRIVATE_HEADERS), Jamfile (HDRMACRO, RefDoc), autogen.sh: Updated.
* builds/amiga/include/config/ftconfig.h, builds/freetype.mk
(PUBLIC_DIR), builds/symbian/bld.inf, builds/toplevel.mk (work),
builds/unix/install.mk (install, uninstall),
builds/unix/freetype2.in: Updated.
* builds/unix/freetype-config.in: Updated.
Emit -I directory only if it is not `/usr/include'.
* builds/wince/*, builds/windows/*: Updated.
* devel/ft2build.h, include/ft2build.h: Updated.
* include/freetype2/config/ftheader.h,
include/freetype2/internal/ftserv.h,
include/freetype2/internal/internal.h: Update all header file
macros.
* src/tools/chktrcmp.py (TRACE_DEF_FILES): Updated.
* docs/*: Updated.
This is just very basic stuff and just a little bit tested on
GNU/Linux only. I won't delve into this since I'm not a Jam user.
* Jamfile: Call `HDRMACRO' for `ftserv.h' also.
(DEFINES): Replace with...
(CCFLAGS): ... this.
* src/Jamfile: Don't call `HDRMACRO' for `internal.h'; this is
already handled in the top-level Jamfile.
* src/autofit/Jamfile (DEFINES): Replace with...
(CCFLAGS): ... this.
(_sources): Add missing files.
* src/cache/Jamfile: Don't call `HDRMACRO' for `ftcache.h'; it no
longer contains macro header definitions.
* src/base/Jamfile, src/cff/Jamfile, src/sfnt/Jamfile,
src/truetype/Jamfile (_sources): Add missing files.
Looks like `ras.span_y' could always be used without initialization.
This was never detected by valgrind before because the library-wide
`raster_pool' was used for the worker object and `raster_pool' was
originally zero'ed. But subsequent reuses of it were using `span_y'
uninitialized. With the recent change to not use `render_pool' and
allocate worker and buffer on the stack, valgrind now detects this
uninitialized access.
* src/smooth/ftgrays.c (gray_raster_render): Initialize
`ras.span_y'.
Assure that FreeType's internal include directories are found before
`CPPFLAGS' (which might be set by the user in the environment), and
`CPPFLAGS' before `CFLAGS'.
* builds/freetype.mk (FT_CFLAGS): Don't add `INCLUDE_FLAGS'.
(FT_COMPILE): Make this a special variable for compiling only the
files handled in `freetype.mk'.
(.c.$O): Removed, unused.
* src/*/rules.mk (*_COMPILE): Fix order of include directories.
suggested by Alexei.
* src/pfr/pfrsbit.c (pfr_slot_load_bitmap): Prevent too
negative values in `xpos' and `ypos + ysize'.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Prevent
too negative values in `x_left' and `y_top'. Either negative
values in `width' and `height' are checked.
* src/raster/ftraster.c (ft_black_set_mode): Change return type to
`int' to stay in sync with `FT_Renderer_SetModeFunc' prototype.
* src/smooth/ftgrays.c (gray_raster_set_mode): New dummy function
for orthogonality.
(ft_grays_raster): Use it.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Translate origin
virtually by modifying cbox, actually translate outline if cumulative
shift is not zero.
* include/internal/ftcalc.h (FT_HYPOT): Move macro from here...
* include/internal/ftobjs.h: ... to here, next to required `FT_ABS'.
* src/smooth/ftgrays.c (gray_render_cubic): Use it here.
This large patch changes the header file directory layout from
`include/freetype/...' to `include/...', effectively removing one
level. Since the file `ft2build.h' is also located in `include'
(and it stays there even after installation), all FreeType header
files are now in a single directory.
Applications that use (a) `freetype-config' or FreeType's
`pkg-config' file to get the include directory for the compiler, and
(b) the documented way for header inclusion like
#include <ft2build.h>
#include FT_FREETYPE_H
...
don't need any change to the source code.
* include/freetype/*: Move up to...
* include/*: ... this directory.
* builds/amiga/include/freetype/*: Move up to...
* builds/amiga/include/*: ... this directory.
*/*: Essentially do `s@/freetype/@/@' where appropriate.
* CMakeList.txt: Simplify.
* builds/unix/freetype-config.in, builds/unix/freetype2.in: For
`--cflags', return a single directory.
* builds/unix/install.mk (install): No longer try to remove `cache'
and `internal' subdirectories; instead, remove the `freetype'
subdirectory.
Provide a work-around for an ARM-specific performance bug in GCC.
This speeds up the rasterizer by more than 5%.
Also slightly optimize `set_gray_cell' and `gray_record_cell' (which
also improves performance on other platforms by a tiny bit (<1%).
* src/smooth/ftgrays.c (FT_DIV_MOD): New macro.
Use it where appropriate.
(gray_record_cell, gray_set_cell, gray_move_to,
gray_convert_glyph_inner): Streamline condition handling.
http://cppcheck.sourceforge.net/
Note that the current version heavily chokes on FreeType, delivering
even wrong results. I will report those issues to the cppcheck team
so that a newer version gives improved results hopefully.
*/* Improve variable scopes.
*/* Remove redundant initializations which get overwritten.
* src/base/ftmac.c ,builds/mac/ftmac.c (count_faces_scalable):
Remove unused variable.
* src/base/ftdbgmem.c (ft_mem_table_destroy): `table' can't be zero.
* src/gxvalid/gxvkern.c (gxv_kern_subtable_fmt1_entry_validate):
Remove functionless code.
* src/tools/ftrandom.c (main): Fix memory leak.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Use `FT_Pos'
instead of `FT_UInt' for some variables and update comparisons
accordingly. A detailed analysis can be found in the bug report.
Originally FT_DEFINE_{DRIVER,MODULE,RENDERER}() macros were
designed to declare xxx_pic_{free,init} by themselves.
Because these macros are used at the end of the module
interface (e.g. ttdriver.c) and the wrapper source to build
a module as a single object (e.g. truetype.c) includes
the PIC file (e.g. ttpic.c) before the module interface,
these macros are expanded AFTER xxx_pic_{free,init} body
when the modules are built as single object.
The declaration after the implementation causes the redundant
declaration warnings, so the declarations are moved to module
PIC headers (e.g. ttpic.h). Separating to other header files
are needed for multi build.
* include/freetype/internal/ftdriver.h (FT_DEFINE_DRIVER):
Remove class_##_pic_free and class_##_pic_init declarations.
* include/freetype/internal/ftobjs.h (FT_DEFINE_RENDERER,
FT_DEFINE_MODULE): Ditto.
* src/base/basepic.h: Insert a comment and fix coding style.
* src/autofit/afpic.h: Declare autofit_module_class_pic_{free,
init}.
* src/cff/cffpic.h: Declare cff_driver_class_pic_{free,init}.
* src/pshinter/pshpic.h: Declare pshinter_module_class_pic_{free,
init}.
* src/psnames/pspic.h: Declare psnames_module_class_pic_{free,
init}.
* src/raster/rastpic.h: Declare
ft_raster{1,5}_renderer_class_pic_{free,init}
* src/sfnt/sfntpic.h: Declare sfnt_module_class_pic_{free,init}.
* src/smooth/ftspic.h: Declare
ft_smooth_{,lcd_,lcdv_}renderer_class_pic_{free,init}.
* src/truetype/ttpic.h: Declare tt_driver_class_pic_{free,init}.
error codes with per-module prefix.
* src/autofit/afpic.c: Include `aferrors.h'.
* src/cff/cffpic.c: Include `cfferrs.h'.
* src/pshinter/pshpic.c: Include `pshnterr.h'.
* src/raster/rastpic.c: Include `rasterrs.h'.
* src/sfnt/sfntpic.c: Include `sferrors.h'.
* src/smooth/ftspic.c: Include `ftsmerrs.h'.
* src/truetype/ttpic.c: Include `tterrors.h'.
* src/autofit/afcjk.c (af_cjk_metrics_init_blues): Use casts and
remove unused variables.
* src/autofit/aflatin.c (af_latin_hints_compute_edges): Comment out
`up_dir'.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Use `height_org'
and `width_org' conditionalized.
This isn't the optimal solution yet, but it restores the previous
rendering quality (more or less).
* src/smooth/ftgrays.c (gray_render_conic): Do more splitting.
* src/smooth/ftsmooth.c (gray_render_conic): Since version 2.4.3,
cubic deviations have been estimated _after_ UPSCALE, whereas
conic ones have been evaluated _before_ UPSCALE, which produces
inferior rendering results. Fix this.
Partially undo change from 2010-10-15 by using ONE_PIXEL/4; this has
been tested with demo images sent to the mailing list. See
http://lists.gnu.org/archive/html/freetype-devel/2010-10/msg00055.html
and later mails in this thread.
FT_MAX_CURVE_DEVIATION is dependent on the value of ONE_PIXEL.
* src/smooth/ftgrays.c (FT_MAX_CURVE_DEVIATION): Remove it and
replace it everywhere with ONE_PIXEL/8.
This fixes the flattening of cubic, S-shaped curves and speeds up
the handling of both the conic and cubic arcs.
See the discussions on the freetype-devel mailing list in late
August and September 2010 for details.
* src/smooth/ftgrays.c (FT_MAX_CURVE_DEVIATION): New macro.
(TWorker): Remove `conic_level' and `cubic_level' elements.
(gray_render_conic): Simplify algorithm.
(gray_render_cubic): New algorithm; details are given in the code
comments.
(gray_convert_glyph): Remove heuristics.
* src/smooth/ftgrays.c (gray_render_span): Use cast to `unsigned
int' to avoid integer overflow.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Use smaller
threshold values for `width' and `height'. This is not directly
related to the bug fix but makes sense anyway.
Problems reported by suyu@cooee.cn.
* src/smooth/ftgrays.c (FT_DEFINE_OUTLINE_FUNCS,
FT_DEFINE_RASTER_FUNCS) [_STANDALONE_]: Define.
[!_STANDALONE_]: Include ftspic.h only here.
(ras): Define/declare after definition of `TWorker'.
Use `RAS_VAR_' where necessary.
* src/smooth/ftsmooth.h declare ft_smooth_renderer_class,
ft_smooth_lcd_renderer_class and ft_smooth_lcd_v_renderer_class
using macros from ftrender.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/smooth/ftsmooth.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
ft_smooth_renderer_class, ft_smooth_lcd_renderer_class
and ft_smooth_lcd_v_renderer_class
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ftspic.h in order to access
ft_grays_raster from the pic_container (allocated in ftgrays.c).
* src/smooth/ftgrays.h include FT_CONFIG_CONFIG_H
* src/smooth/ftgrays.c when FT_CONFIG_OPTION_PIC is NOT defined
func_interface was moved from gray_convert_glyph_inner function
to the global scope.
When FT_CONFIG_OPTION_PIC is defined
func_interface and ft_grays_raster structs
will have functions to init them
instead of being allocated in the global scope.
And func_interface will be allocated on the stack of
gray_convert_glyph_inner.
New Files:
* src/smooth/ftspic.h declare struct to hold PIC globals for smooth
renderer and macros to access them.
* src/smooth/ftspic.c implement functions to allocate, destroy and
initialize PIC globals for smooth renderer.
* src/smooth/smooth.c add new file to build: ftspic.c.
* src/smooth/jamfile add new files to FT2_MULTI build: ftspic.c.
Problem reported by Tavis Ormandy <taviso@google.com>.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Don't allow
`width' or `pitch' to be larger than 0xFFFF.
src/smooth/ftgrays.c, src/base/ftobjc.s, src/sfobjs.c:
s/_Err_Bad_Argument/_Err_Invalid_Argument/. The former is for
errors in the bytecode interpreter only.
extern const FT_Module_Class
(or similar for C++). However, the actual types of the variables
being declared are often different, e.g., FT_Driver_ClassRec or
FT_Renderer_Class. (Some are, indeed, FT_Module_Class.)
This works with most C compilers (since those structs begin with an
FT_Module_Class struct), but technically it's undefined behavior.
To quote the ISO/IEC 9899:TC2 final committee draft, section 6.2.7
paragraph 2:
All declarations that refer to the same object or function shall
have compatible type; otherwise, the behavior is undefined.
(And they are not compatible types.)
Most C compilers don't reject (or even detect!) code which has this
issue, but the GCC LTO development branch compiler does. (It
outputs the types of the objects while generating .o files, along
with a bunch of other information, then compares them when doing the
final link-time code generation pass.)
Patch from Savannah bug #25133.
* src/base/ftinit.c (FT_USE_MODULE): Include variable type.
* builds/amiga/include/freetype/config/ftmodule.h,
include/freetype/config/ftmodule.h, */module.mk: Updated to declare
pass correct types to FT_USE_MODULE.
* include/freetype/internal/t1types.h (CID_FaceRec),
src/type42/t42types.h (T42_FaceRec): Comment out `afm_data'.
* src/smooth/ftgrays.c (gray_raster_render): Don't dereference
`target_map' if FT_RASTER_FLAG_DIRECT is set. Problem reported by
Stephan T. Lavavej <stl@nuwen.net>.
(FT_Outline_Decompose): Decorate with tracing messages.
* src/smooth/ftgrays.c [DEBUG_GRAYS]: Replace with
FT_DEBUG_LEVEL_TRACE.
[_STANDALONE_ && FT_DEBUG_LEVEL_TRACE]: Include stdio.h and
stdarg.h.
(FT_TRACE) [_STANDALONE_]: Remove.
(FT_Message) [_STANDALONE_ && FT_DEBUG_LEVEL_TRACE]: New function.
(FT_TRACE5, FT_TRACE7) [_STANDALONE_]: New macros.
(FT_ERROR) [_STANDALONE_]: Updated.
(gray_hline) [FT_DEBUG_LEVEL_TRACE]: Fix condition.
Use FT_TRACE7.
(gray_dump_cells): Make it `static void'.
(graay_convert_glyph): Use FT_TRACE7.
(FT_Outline_Decompose) [_STANDALONE_]: Synchronize with version in
ftoutln.c.
* src/base/ftadvanc.c (FT_Get_Advance, FT_Get_Advances): Use
FT_ERROR_BASE.
Other minor modifications.
encoded in UTF-16BE. Patch from Rajeev Pahuja <rpahuja@esri.com>.
(tt_name_entry_ascii_from_ucs4): Removed.
* include/freetype/ftxf86.h: Fix and extend comment so that it
appears in the documentation.
* include/freetype/ftchapters.h: Add `font_format' section.
* src/tools/docmaker/tohtml.py (HtmlFormatter::index_exit): Add link
to TOC in index page.
Formatting.
src/base/ftlcdfilt.c, src/smooth/ftsmooth.c: API change for
the LCD filter, the FT_LcdFilter value is a enum describing
which filter to apply, new values FT_LCD_FILTER_LIGHT and
FT_LCD_FILTER_LEGACY (the latter implements the LibXft original
algorithm which produces incredible color fringes for everything
except very-well hinted text)
* src/autofit/aflatin.c: various tiny improvements that drastically
improve the handling of serif fonts and of LCD/LCD_V hinting modes.
for an upcoming 2.2.2 release
* include/freetype/ftlcdfil.h, src/freetype/ftlcdfil.c:
added a new API to support color filtering of subpixel glyph
bitmaps. In default build, the function FT_Library_SetLcdFilter
returns FT_Err_Unimplemented_Feature; you need to #define
FT_CONFIG_OPTION_SUBPIXEL_RENDERING in ftoption.h to compile
the real implementation
* src/smooth/ftsmooth.c: adding support for sub-pixel color
filtering; simplifying a few function calls
* include/freetype/config/ftheader.h: adding FT_LCD_FILTER_H
macro that points to <freetype/ftlcdfil.h>
I. IMPORTANT BUG FIXES
- Various integer overflows have been fixed.
- PFB fonts with MacOS resource fork weren't handled correctly on
non-MacOS platforms.
- The PCF font loarder has been seriously hardened against malformed
font files.
II. IMPORTANT CHANGES
- the unpatented hinter is now part of the default build of the
library, and we added code to automatically support "tricky"
fonts that need it.
what this means is that FreeType should "just work" with certain
Asian fonts, like MingLiu, which cannot properly load without a
bytecode interpreter, but fortunately do not use any of the
patented bytecode opcodes.
Note that the API didn't change, so you can still force
unpatented hinting with a special parameter to FT_Open_Face
as well.
if you're an embedded systems developer, you might want to
*disable* the feature to save code space by undefining
TT_CONFIG_OPTION_UNPATENTED_HINTING in ftoption.h.
- LCD-optimized rendering is now disabled in all default builds
of the library, mainly due to patent reasons. For more information
see:
http://lists.gnu.org/archive/html/freetype/2006-09/msg00064.html
a new configuration macro FT_CONFIG_OPTION_SUBPIXEL_RENDERING has
been introduced in ftoption.h; manually define it in this file
if you want to re-enable the feature.
the change only affects the implementation, not the FreeType API.
This means that clients don't need to be modified, because the
library still generates LCD decimated bitmaps, but with the added
constraint that R=G=B on each triplet.
- Some computation bugs in the TrueType bytecode interpreter were found,
which allow us to get rid of very subtle and rare differences we had
with the Windows renderer.
III. MISCELLANEOUS
- TrueType glyph loading is now about 25% faster.
- the anti-aliased rasterizer has been optimized and is now 15% to 25%
percent faster than the previous one, depending on content
- the Type 1 loader has been improved; as an example, it now skips
over top-level dictionaries properly
======================================================================
values which have the upper two bytes set to 0xFF instead of 0xFF
(as it happens in at least two CJKV fonts, `HAN NOM A.ttf' and
`HAN NOM B.ttf').
* src/smooth/ftgrays.c [GRAYS_USE_GAMMA]: Really remove all code.
Formatting.
sufficient to modify a single file, `modules.cfg', to control the
inclusion of modules and base extension files.
This change also fixes the creation of ftmodule.h; it now depends on
`modules.cfg' and thus is rebuilt only if necessary.
Finally, a version of `ftoption.h' in OBJ_DIR is preferred over the
default location.
* modules.cfg: New file.
* builds/freetype.mk: Don't include `modules.mk'.
Include all `rules.mk' files as specified in `modules.cfg'.
(FTOPTION_FLAG, FTOPTION_H): New variables.
(FT_CFLAGS): Add macro definition for FT_CONFIG_MODULES_H.
Add FTOPTION_FLAG.
($(FT_INIT_OBJ)): Don't use FT_MODULE_LIST.
(CONFIG_H): Add FTMODULE_H and FTOPTION_H.
(INCLUDES): Add DEVEL_DIR.
(INCLUDE_FLAGS, FTSYS_SRC, FTSYS_OBJ, FTDEBUG_SRC, FTDEBUG_OBJ,
OBJ_M, OBJ_S): Use `:=', not `='.
(remove_ftmodule_h): New phony target to delete `ftmodule.h'.
(distclean): Add remove_ftmodule_h.
* builds/modules.mk: (MODULE_LIST): Removed.
(make_module_list, clean_module_list): Replace targets
with...
(FTMODULE_H_INIT, FTMODULE_H_CREATE, FTMODULE_H_DONE): New
variables. Reason for the change is that it is not possible to have
a phony prerequisite which is run only if the target file must be
rebuilt (phony prerequisites act like subroutines and are *always*
executed). We only want to rebuild `ftmodule.h' if `module.cfg' is
changed.
Update all callers.
($FTMODULE_H)): Rule to create `ftmodule.h', depending on
`modules.cfg'.
* builds/toplevel.mk: Rewrite and simplify module handling.
(MODULES_CFG, FTMODULE_H): New variables.
Include MODULES_CFG.
(MODULES): New variable to include all `module.mk' and `rules.mk'
files. We no longer use make's `wildcard' function for this.
* Makefile (USE_MODULES): Remove. Update all users.
(OBJ_DIR): Define it here.
* src/*/module.mk: Change
make_module_list: foo
foo: ...
to
FTMODULE_H_COMMANDS += FOO
define FOO
...
endef
in all files. `FTMODULE_H_COMMANDS' is used in `FTMODULE_H_CREATE'.
* src/base/rules.mk (BASE_EXT_SRC): Use BASE_EXTENSIONS.
* builds/unix/detect.mk (setup): Always execute `configure' script.
(have_mk): Rename to...
(have_Makefile): This.
Don't use `strip' function.
* builds/unix/unix.mk: Include `install.mk' only if BUILD_PROJECT is
defined.
(have_mk): Don't use `strip' function.
Test for unix-def.mk in OBJ_DIR, not BUILD_DIR (and invert the test
accordingly).
* builds/unix/install.mk (install, uninstall): Handle `ftmodule.h'.
* builds/os2/os2-dev.mk, builds/unix/unix-dev.mk,
builds/win32/w32-bccd.mk, builds/win32/w32-dev.mk: Don't define
BUILD_DIR but DEVEL_DIR for development header files.
* builds/ansi/ansi-def.mk (TOP_DIR, OBJ_DIR),
builds/beos/beos-def.mk (TOP_DIR, OBJ_DIR), builds/unix/unix-def.in
(TOP_DIR, OBJ_DIR): Removed. Defined elsewhere.
* builds/dos/dos-def.mk (OBJ_DIR), builds/os2/os2-def.mk (OBJ_DIR),
builds/win32/win32-def.mk (OBJ_DIR): Removed. Defined elsewhere.
* builds/unix/unixddef.mk: Don't define BUILD_DIR but DEVEL_DIR for
development header files.
Don't define PLATFORM.
* configure: Copy `modules.cfg' to builddir if builddir != srcdir.
Update snippet taken from autoconf's m4sh.m4 to current CVS version.
Be more verbose.
* include/freetype/config/ftmodule.h: Add comments -- this file is
no longer used if FreeType is built with GNU make.
* docs/CHANGES, docs/CUSTOMIZE, docs/INSTALL, docs/INSTALL.ANY,
docs/INSTALL.GNU, docs/INSTALL.UNX: Document new build mechanism.
Other minor updates.
* modules.txt: Removed. Contents included in `modules.cfg'.
* include/freetype/internal/ftmemory.h (FT_QAlloc_Debug,
FT_Free_Debug) [FT_STRICT_ALIASING]: Fix typos.
* src/base/ftdbgmem.c (FT_Alloc_Debug, FT_Realloc_Debug,
FT_QAlloc_Debug, FT_QRealloc_Debug, FT_Free_Debug)
[FT_STRICT_ALIASING]: Implement.
Alexei Podtelezhnikov