rgraves
/
freetype2
forked from minhngoc25a/freetype2
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
freetype2/src/type1z/t1gload.c

1375 lines
42 KiB
C
Raw Normal View History

added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/*******************************************************************
*
* t1gload.c 1.0
*
* Type1 Glyph Loader.
*
* Copyright 1996-1999 by
* David Turner, Robert Wilhelm, and Werner Lemberg.
*
* This file is part of the FreeType project, and may only be used
* modified and distributed under the terms of the FreeType project
* license, LICENSE.TXT. By continuing to use, modify, or distribute
* this file you indicate that you have read the license and
* understand and accept it fully.
*
******************************************************************/
#include <t1gload.h>
major re-organisation of the FreeType 2 directory hierarchy
2000-05-11 20:23:52 +02:00
#include <freetype/internal/ftdebug.h>
#include <freetype/internal/ftstream.h>
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
#undef FT_COMPONENT
#define FT_COMPONENT trace_t1gload
typedef enum T1_Operator_
{
op_none = 0,
op_endchar,
op_hsbw,
op_seac,
op_sbw,
op_closepath,
op_hlineto,
op_hmoveto,
op_hvcurveto,
op_rlineto,
op_rmoveto,
op_rrcurveto,
op_vhcurveto,
op_vlineto,
op_vmoveto,
op_dotsection,
op_hstem,
op_hstem3,
op_vstem,
op_vstem3,
op_div,
op_callothersubr,
op_callsubr,
op_pop,
op_return,
op_setcurrentpoint,
op_max /* never remove this one */
} T1_Operator;
static const T1_Int t1_args_count[ op_max ] =
{
0, /* none */
0, /* endchar */
2, /* hsbw */
5, /* seac */
4, /* sbw */
0, /* closepath */
1, /* hlineto */
1, /* hmoveto */
4, /* hvcurveto */
2, /* rlineto */
2, /* rmoveto */
6, /* rrcurveto */
4, /* vhcurveto */
1, /* vlineto */
1, /* vmoveto */
0, /* dotsection */
2, /* hstem */
6, /* hstem3 */
2, /* vstem */
6, /* vstem3 */
2, /* div */
-1, /* callothersubr */
1, /* callsubr */
0, /* pop */
0, /* return */
2 /* setcurrentpoint */
};
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/**********************************************************************/
/**********************************************************************/
/**********************************************************************/
/********** *********/
/********** *********/
/********** GENERIC CHARSTRINGS PARSING *********/
/********** *********/
/********** *********/
/**********************************************************************/
/**********************************************************************/
/**********************************************************************/
/*********************************************************************
*
* <Function>
* T1_Init_Builder
*
* <Description>
* Initialise a given glyph builder.
*
* <Input>
* builder :: glyph builder to initialise
* face :: current face object
* size :: current size object
* glyph :: current glyph object
*
*********************************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
LOCAL_FUNC
void T1_Init_Builder( T1_Builder* builder,
T1_Face face,
T1_Size size,
T1_GlyphSlot glyph )
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
{
builder->path_begun = 0;
builder->load_points = 1;
builder->face = face;
builder->glyph = glyph;
builder->memory = face->root.memory;
if (glyph)
{
builder->base = glyph->root.outline;
builder->max_points = glyph->max_points;
builder->max_contours = glyph->max_contours;
}
if (size)
{
builder->scale_x = size->root.metrics.x_scale;
builder->scale_y = size->root.metrics.y_scale;
}
builder->pos_x = 0;
builder->pos_y = 0;
builder->left_bearing.x = 0;
builder->left_bearing.y = 0;
builder->advance.x = 0;
builder->advance.y = 0;
builder->base.n_points = 0;
builder->base.n_contours = 0;
builder->current = builder->base;
}
/*********************************************************************
*
* <Function>
* T1_Done_Builder
*
* <Description>
* Finalise a given glyph builder. Its content can still be
* used after the call, but the function saves important information
* within the corresponding glyph slot.
*
* <Input>
* builder :: glyph builder to initialise
*
*********************************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
LOCAL_FUNC
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
void T1_Done_Builder( T1_Builder* builder )
{
T1_GlyphSlot glyph = builder->glyph;
if (glyph)
{
glyph->root.outline = builder->base;
glyph->max_points = builder->max_points;
glyph->max_contours = builder->max_contours;
}
}
/*********************************************************************
*
* <Function>
* T1_Init_Decoder
*
* <Description>
* Initialise a given Type 1 decoder for parsing
*
* <Input>
* decoder :: Type 1 decoder to initialise
* funcs :: hinter functions interface
*
*********************************************************************/
a new massive grunt work. Redefined the EXPORT_DEF, EXPORT_FUNC, BASE_DEF and BASE_FUNC macros to let them take an argument.. This is needed to compile the library as a DLL on some platforms that have different compiler conventions..
2000-05-12 14:17:15 +02:00
LOCAL_FUNC
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
void T1_Init_Decoder( T1_Decoder* decoder )
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
{
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
decoder->top = 0;
decoder->zone = 0;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
decoder->flex_state = 0;
decoder->num_flex_vectors = 0;
/* Clear loader */
MEM_Set( &decoder->builder, 0, sizeof(decoder->builder) );
}
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
/* check that there is enough room for "count" more points */
static
T1_Error check_points( T1_Builder* builder,
T1_Int count )
{
FT_Outline* base = &builder->base;
FT_Outline* outline = &builder->current;
if (!builder->load_points)
return T1_Err_Ok;
count += base->n_points + outline->n_points;
/* realloc points table if necessary */
if ( count >= builder->max_points )
{
T1_Error error;
FT_Memory memory = builder->memory;
T1_Int increment = outline->points - base->points;
T1_Int current = builder->max_points;
while ( builder->max_points < count )
builder->max_points += 8;
if ( REALLOC_ARRAY( base->points, current,
builder->max_points, T1_Vector ) ||
reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..
2000-03-09 12:46:25 +01:00
REALLOC_ARRAY( base->tags, current,
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
builder->max_points, T1_Byte ) )
{
builder->error = error;
return error;
}
outline->points = base->points + increment;
reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..
2000-03-09 12:46:25 +01:00
outline->tags = base->tags + increment;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
return T1_Err_Ok;
}
/* add a new point, do not check room */
static
void add_point( T1_Builder* builder,
FT_Pos x,
FT_Pos y,
FT_Byte flag )
{
FT_Outline* outline = &builder->current;
if (builder->load_points)
{
FT_Vector* point = outline->points + outline->n_points;
reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..
2000-03-09 12:46:25 +01:00
FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
point->x = x;
point->y = y;
*control = ( flag ? FT_Curve_Tag_On : FT_Curve_Tag_Cubic );
builder->last = *point;
}
outline->n_points++;
}
/* check room for a new on-curve point, then add it */
static
T1_Error add_point1( T1_Builder* builder,
FT_Pos x,
FT_Pos y )
{
T1_Error error;
error = check_points(builder,1);
if (!error)
add_point( builder, x, y, 1 );
return error;
}
/* check room for a new contour, then add it */
static
T1_Error add_contour( T1_Builder* builder )
{
FT_Outline* base = &builder->base;
FT_Outline* outline = &builder->current;
if (!builder->load_points)
{
outline->n_contours++;
return T1_Err_Ok;
}
/* realloc contours array if necessary */
if ( base->n_contours + outline->n_contours >= builder->max_contours &&
builder->load_points )
{
T1_Error error;
FT_Memory memory = builder->memory;
T1_Int increment = outline->contours - base->contours;
T1_Int current = builder->max_contours;
builder->max_contours += 4;
if ( REALLOC_ARRAY( base->contours,
current, builder->max_contours, T1_Short ) )
{
builder->error = error;
return error;
}
outline->contours = base->contours + increment;
}
if (outline->n_contours > 0)
outline->contours[ outline->n_contours-1 ] = outline->n_points-1;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
outline->n_contours++;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
return T1_Err_Ok;
}
/* if a path was begun, add its first on-curve point */
static
T1_Error start_point( T1_Builder* builder,
T1_Pos x,
T1_Pos y )
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
/* test wether we're building a new contour */
if (!builder->path_begun)
{
T1_Error error;
builder->path_begun = 1;
error = add_contour( builder );
if (error) return error;
}
return add_point1( builder, x, y );
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
/* close the current contour */
static
void close_contour( T1_Builder* builder )
{
FT_Outline* outline = &builder->current;
if ( outline->n_contours > 0 )
outline->contours[outline->n_contours-1] = outline->n_points-1;
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/*********************************************************************
*
* <Function>
* lookup_glyph_by_stdcharcode
*
* <Description>
* Lookup a given glyph by its StandardEncoding charcode. Used
* to implement the SEAC Type 1 operator.
*
* <Input>
* face :: current face object
* charcode :: charcode to look for
*
* <Return>
* glyph index in font face. Returns -1 if the corresponding
* glyph wasn't found.
*
*********************************************************************/
static
T1_Int lookup_glyph_by_stdcharcode( T1_Face face,
T1_Int charcode )
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
T1_Int n;
const T1_String* glyph_name;
PSNames_Interface* psnames = (PSNames_Interface*)face->psnames;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/* check range of standard char code */
if (charcode < 0 || charcode > 255)
return -1;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
glyph_name = psnames->adobe_std_strings(
psnames->adobe_std_encoding[charcode]);
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
for ( n = 0; n < face->type1.num_glyphs; n++ )
{
T1_String* name = (T1_String*)face->type1.glyph_names[n];
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
if ( name && strcmp(name,glyph_name) == 0 )
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
return n;
}
return -1;
}
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/*********************************************************************
*
* <Function>
* t1operator_seac
*
* <Description>
* Implements the "seac" Type 1 operator for a Type 1 decoder
*
* <Input>
* decoder :: current Type 1 decoder
* asb :: accent's side bearing
* adx :: horizontal position of accent
* ady :: vertical position of accent
* bchar :: base character's StandardEncoding charcode
* achar :: accent character's StandardEncoding charcode
*
* <Return>
* Error code. 0 means success.
*
*********************************************************************/
static
T1_Error t1operator_seac( T1_Decoder* decoder,
T1_Pos asb,
T1_Pos adx,
T1_Pos ady,
T1_Int bchar,
T1_Int achar )
{
T1_Error error;
T1_Face face = decoder->builder.face;
T1_Int bchar_index, achar_index, n_base_points;
FT_Outline* cur = &decoder->builder.current;
FT_Outline* base = &decoder->builder.base;
T1_Vector left_bearing, advance;
T1_Font* type1 = &face->type1;
bchar_index = lookup_glyph_by_stdcharcode( face, bchar );
achar_index = lookup_glyph_by_stdcharcode( face, achar );
if (bchar_index < 0 || achar_index < 0)
{
FT_ERROR(( "T1.Parse_Seac : invalid seac character code arguments\n" ));
return T1_Err_Syntax_Error;
}
/* First load "bchar" in builder */
/* now load the unscaled outline */
cur->n_points = 0;
cur->n_contours = 0;
cur->points = base->points + base->n_points;
reformatting, changing the FT_Outline structure: - "flags" have been renamed to "tags" - "outline_flags" have been renamed to "flags" Look for more re-formatting today..
2000-03-09 12:46:25 +01:00
cur->tags = base->tags + base->n_points;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
cur->contours = base->contours + base->n_contours;
error = T1_Parse_CharStrings( decoder,
type1->charstrings [bchar_index],
type1->charstrings_len[bchar_index],
type1->num_subrs,
type1->subrs,
type1->subrs_len );
if (error) return error;
n_base_points = cur->n_points;
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
if ( decoder->builder.no_recurse )
{
/* if we're trying to load a composite glyph, do not load the */
/* accent character and return the array of subglyphs.. */
FT_GlyphSlot glyph = (FT_GlyphSlot)decoder->builder.glyph;
FT_SubGlyph* subg;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
/* reallocate subglyph array if necessary */
if (glyph->max_subglyphs < 2)
{
FT_Memory memory = decoder->builder.face->root.memory;
if ( REALLOC_ARRAY( glyph->subglyphs, glyph->max_subglyphs,
2, FT_SubGlyph ) )
return error;
glyph->max_subglyphs = 2;
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
subg = glyph->subglyphs;
/* subglyph 0 = base character */
subg->index = bchar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES |
FT_SUBGLYPH_FLAG_USE_MY_METRICS;
subg->arg1 = 0;
subg->arg2 = 0;
subg++;
/* subglyph 1 = accent character */
subg->index = achar_index;
subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES;
subg->arg1 = adx - asb;
subg->arg2 = ady;
/* set up remaining glyph fields */
glyph->num_subglyphs = 2;
glyph->format = ft_glyph_format_composite;
}
else
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
{
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
/* save the left bearing and width of the base character */
/* as they will be erase by the next load.. */
left_bearing = decoder->builder.left_bearing;
advance = decoder->builder.advance;
decoder->builder.left_bearing.x = 0;
decoder->builder.left_bearing.y = 0;
/* Now load "achar" on top of */
/* the base outline */
/* */
cur->n_points = 0;
cur->n_contours = 0;
cur->points = base->points + base->n_points;
cur->tags = base->tags + base->n_points;
cur->contours = base->contours + base->n_contours;
error = T1_Parse_CharStrings( decoder,
type1->charstrings [achar_index],
type1->charstrings_len[achar_index],
type1->num_subrs,
type1->subrs,
type1->subrs_len );
if (error) return error;
/* adjust contours in accented character outline */
if (decoder->builder.load_points)
{
T1_Int n;
for ( n = 0; n < cur->n_contours; n++ )
cur->contours[n] += n_base_points;
}
/* restore the left side bearing and */
/* advance width of the base character */
decoder->builder.left_bearing = left_bearing;
decoder->builder.advance = advance;
/* Finally, move the accent */
if (decoder->builder.load_points)
FT_Outline_Translate( cur, adx - asb, ady );
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
}
return T1_Err_Ok;
}
/*********************************************************************
*
* <Function>
* T1_Parse_CharStrings
*
* <Description>
* Parses a given Type 1 charstrings program
*
* <Input>
* decoder :: current Type 1 decoder
* charstring_base :: base of the charstring stream
* charstring_len :: length in bytes of the charstring stream
* num_subrs :: number of sub-routines
* subrs_base :: array of sub-routines addresses
* subrs_len :: array of sub-routines lengths
*
* <Return>
* Error code. 0 means success.
*
*********************************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
#define USE_ARGS(n) top -= n; if (top < decoder->stack) goto Stack_Underflow
a few fixes to get rid of unwanted compile-time warnings
2000-03-06 10:51:19 +01:00
LOCAL_FUNC
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
T1_Error T1_Parse_CharStrings( T1_Decoder* decoder,
T1_Byte* charstring_base,
T1_Int charstring_len,
T1_Int num_subrs,
T1_Byte** subrs_base,
T1_Int* subrs_len )
{
T1_Error error;
T1_Decoder_Zone* zone;
T1_Byte* ip;
T1_Byte* limit;
T1_Builder* builder = &decoder->builder;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
FT_Outline* outline;
T1_Pos x, y;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/* First of all, initialise the decoder */
decoder->top = decoder->stack;
decoder->zone = decoder->zones;
zone = decoder->zones;
builder->path_begun = 0;
zone->base = charstring_base;
limit = zone->limit = charstring_base + charstring_len;
ip = zone->cursor = zone->base;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
error = T1_Err_Ok;
outline = &builder->current;
x = builder->pos_x;
y = builder->pos_y;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/* now, execute loop */
while ( ip < limit )
{
T1_Int* top = decoder->top;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
T1_Operator op = op_none;
T1_Long value = 0;
/********************************************************************/
/* */
/* Decode operator or operand */
/* */
/* */
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/* First of all, decompress operator or value */
switch (*ip++)
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case 1: op = op_hstem; break;
case 3: op = op_vstem; break;
case 4: op = op_vmoveto; break;
case 5: op = op_rlineto; break;
case 6: op = op_hlineto; break;
case 7: op = op_vlineto; break;
case 8: op = op_rrcurveto; break;
case 9: op = op_closepath; break;
case 10: op = op_callsubr; break;
case 11: op = op_return; break;
case 13: op = op_hsbw; break;
case 14: op = op_endchar; break;
case 21: op = op_rmoveto; break;
case 22: op = op_hmoveto; break;
case 30: op = op_vhcurveto; break;
case 31: op = op_hvcurveto; break;
case 12:
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
if (ip > limit)
{
FT_ERROR(( "T1.Parse_CharStrings : invalid escape (12+EOF)\n" ));
goto Syntax_Error;
}
switch (*ip++)
{
case 0: op = op_dotsection; break;
case 1: op = op_vstem3; break;
case 2: op = op_hstem3; break;
case 6: op = op_seac; break;
case 7: op = op_sbw; break;
case 12: op = op_div; break;
case 16: op = op_callothersubr; break;
case 17: op = op_pop; break;
case 33: op = op_setcurrentpoint; break;
default:
FT_ERROR(( "T1.Parse_CharStrings : invalid escape (12+%d)\n",
ip[-1] ));
goto Syntax_Error;
}
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case 255: /* four bytes integer */
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
if (ip+4 > limit)
{
FT_ERROR(( "T1.Parse_CharStrings : unexpected EOF in integer\n" ));
goto Syntax_Error;
}
value = ((long)ip[0] << 24) |
((long)ip[1] << 16) |
((long)ip[2] << 8) |
ip[3];
ip += 4;
}
break;
default:
if (ip[-1] >= 32)
{
if (ip[-1] < 247)
value = (long)ip[-1] - 139;
else
{
if (++ip > limit)
{
FT_ERROR(( "T1.Parse_CharStrings : unexpected EOF in integer\n" ));
goto Syntax_Error;
}
if (ip[-2] < 251)
value = ((long)(ip[-2]-247) << 8) + ip[-1] + 108;
else
value = -((((long)ip[-2]-251) << 8) + ip[-1] + 108 );
}
}
else
{
FT_ERROR(( "T1.Parse_CharStrings : invalid byte (%d)\n",
ip[-1] ));
goto Syntax_Error;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
}
/********************************************************************/
/* */
/* Push value on stack, or process operator */
/* */
/* */
if ( op == op_none )
{
if ( top - decoder->stack >= T1_MAX_CHARSTRINGS_OPERANDS )
{
FT_ERROR(( "T1.Parse_CharStrings : Stack overflow !!\n" ));
goto Syntax_Error;
}
FT_TRACE4(( " %ld", value ));
*top++ = value;
decoder->top = top;
}
else if ( op == op_callothersubr ) /* callothersubr */
{
FT_TRACE4(( " callothersubr" ));
if ( top - decoder->stack < 2 )
goto Stack_Underflow;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
top -= 2;
switch ( top[1] )
{
case 1: /* start flex feature ---------------------- */
{
if ( top[0] != 0 ) goto Unexpected_OtherSubr;
decoder->flex_state = 1;
decoder->num_flex_vectors = 0;
if ( start_point(builder, x, y) ||
check_points(builder,6) ) goto Memory_Error;
}
break;
case 2: /* add flex vectors ------------------------ */
{
T1_Int index;
if ( top[0] != 0 ) goto Unexpected_OtherSubr;
/* note that we should not add a point for index 0 */
/* this will move our current position to the flex */
/* point without adding any point to the outline */
index = decoder->num_flex_vectors++;
if (index > 0 && index < 7)
add_point( builder,
x,
y,
(T1_Byte)( index==3 || index==6 ) );
}
break;
case 0: /* end flex feature ------------------------- */
{
if ( top[0] != 3 ) goto Unexpected_OtherSubr;
if ( decoder->flex_state == 0 ||
decoder->num_flex_vectors != 7 )
{
FT_ERROR(( "T1.Parse_CharStrings: unexpected flex end\n" ));
goto Syntax_Error;
}
/* now consume the remaining "pop pop setcurpoint" */
if ( ip+6 > limit ||
ip[0] != 12 || ip[1] != 17 || /* pop */
ip[2] != 12 || ip[3] != 17 || /* pop */
ip[4] != 12 || ip[5] != 33 ) /* setcurpoint */
{
FT_ERROR(( "T1.Parse_CharStrings: invalid flex charstring\n" ));
goto Syntax_Error;
}
ip += 6;
decoder->flex_state = 0;
break;
}
case 3: /* change hints ---------------------------- */
{
if ( top[0] != 1 ) goto Unexpected_OtherSubr;
/* eat the following "pop" */
if (ip+2 > limit)
{
FT_ERROR(( "T1.Parse_CharStrings: invalid escape (12+%d)\n",
ip[-1] ));
goto Syntax_Error;
}
if (ip[0] != 12 || ip[1] != 17)
{
FT_ERROR(( "T1.Parse_CharStrings: 'pop' expected, found (%d %d)\n",
ip[0], ip[1] ));
goto Syntax_Error;
}
ip += 2;
break;;
}
default:
Unexpected_OtherSubr:
FT_ERROR(( "T1.Parse_CharStrings: invalid othersubr [%d %d]!!\n",
top[0], top[1] ));
goto Syntax_Error;
}
decoder->top = top;
}
else /* general operator */
{
T1_Int num_args = t1_args_count[op];
if ( top - decoder->stack < num_args )
goto Stack_Underflow;
top -= num_args;
switch (op)
{
case op_endchar: /*************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " endchar" ));
close_contour( builder );
/* add current outline to the glyph slot */
builder->base.n_points += builder->current.n_points;
builder->base.n_contours += builder->current.n_contours;
/* return now !! */
FT_TRACE4(( "\n\n" ));
return T1_Err_Ok;
}
case op_hsbw: /****************************************************/
{
FT_TRACE4(( " hsbw" ));
builder->left_bearing.x += top[0];
builder->advance.x = top[1];
builder->advance.y = 0;
builder->last.x = x = top[0];
builder->last.y = y = 0;
/* the "metrics_only" indicates that we only want to compute */
/* the glyph's metrics (lsb + advance width), not load the */
/* rest of it.. so exit immediately */
if (builder->metrics_only)
return T1_Err_Ok;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_seac: /****************************************************/
/* return immediately after the processing */
return t1operator_seac( decoder, top[0], top[1],
top[2], top[3], top[4] );
case op_sbw: /****************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " sbw" ));
builder->left_bearing.x += top[0];
builder->left_bearing.y += top[1];
builder->advance.x = top[2];
builder->advance.y = top[3];
builder->last.x = x = top[0];
builder->last.y = y = top[1];
/* the "metrics_only" indicates that we only want to compute */
/* the glyph's metrics (lsb + advance width), not load the */
/* rest of it.. so exit immediately */
if (builder->metrics_only)
return T1_Err_Ok;
break;
}
case op_closepath: /**********************************************/
{
FT_TRACE4(( " closepath" ));
close_contour( builder );
builder->path_begun = 0;
}
break;
case op_hlineto: /************************************************/
{
FT_TRACE4(( " hlineto" ));
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
if ( start_point( builder, x, y ) ) goto Memory_Error;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
x += top[0];
goto Add_Line;
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_hmoveto: /************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " hmoveto" ));
x += top[0];
break;
}
case op_hvcurveto: /**********************************************/
{
FT_TRACE4(( " hvcurveto" ));
if ( start_point( builder, x, y ) ||
check_points( builder, 3 ) ) goto Memory_Error;
x += top[0];
add_point( builder, x, y, 0 );
x += top[1];
y += top[2];
add_point( builder, x, y, 0 );
y += top[3];
add_point( builder, x, y, 1 );
break;
}
case op_rlineto: /*************************************************/
{
FT_TRACE4(( " rlineto" ));
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
if ( start_point( builder, x, y ) ) goto Memory_Error;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
x += top[0];
y += top[1];
Add_Line:
if (add_point1( builder, x, y )) goto Memory_Error;
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_rmoveto: /*************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " rmoveto" ));
x += top[0];
y += top[1];
break;
}
case op_rrcurveto: /***********************************************/
{
FT_TRACE4(( " rcurveto" ));
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
if ( start_point( builder, x, y ) ||
check_points( builder, 3 ) ) goto Memory_Error;
x += top[0];
y += top[1];
add_point( builder, x, y, 0 );
x += top[2];
y += top[3];
add_point( builder, x, y, 0 );
x += top[4];
y += top[5];
add_point( builder, x, y, 1 );
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_vhcurveto: /**********************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " vhcurveto" ));
if ( start_point( builder, x, y ) ||
check_points( builder, 3 ) ) goto Memory_Error;
y += top[0];
add_point( builder, x, y, 0 );
x += top[1];
y += top[2];
add_point( builder, x, y, 0 );
x += top[3];
add_point( builder, x, y, 1 );
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_vlineto: /************************************************/
{
FT_TRACE4(( " vlineto" ));
if ( start_point( builder, x, y ) ) goto Memory_Error;
y += top[0];
goto Add_Line;
}
case op_vmoveto: /************************************************/
{
FT_TRACE4(( " vmoveto" ));
y += top[0];
break;
}
case op_div: /****************************************************/
{
FT_TRACE4(( " div" ));
if (top[1])
*top++ = top[0] / top[1];
else
{
FT_ERROR(( "T1.Parse_CharStrings : division by 0\n" ));
goto Syntax_Error;
}
break;
}
case op_callsubr: /***********************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
T1_Int index;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " callsubr" ));
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
index = top[0];
if ( index < 0 || index >= num_subrs )
{
FT_ERROR(( "T1.Parse_CharStrings : invalid subrs index\n" ));
goto Syntax_Error;
}
if ( zone - decoder->zones >= T1_MAX_SUBRS_CALLS )
{
FT_ERROR(( "T1.Parse_CharStrings : too many nested subrs\n" ));
goto Syntax_Error;
}
zone->cursor = ip; /* save current instruction pointer */
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
zone++;
zone->base = subrs_base[index];
zone->limit = zone->base + subrs_len[index];
zone->cursor = zone->base;
if (!zone->base)
{
FT_ERROR(( "T1.Parse_CharStrings : invoking empty subrs !!\n" ));
goto Syntax_Error;
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
decoder->zone = zone;
ip = zone->base;
limit = zone->limit;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_pop: /****************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " pop" ));
FT_ERROR(( "T1.Parse_CharStrings : unexpected POP\n" ));
goto Syntax_Error;
}
case op_return: /************************************************/
{
FT_TRACE4(( " return" ));
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
if ( zone <= decoder->zones )
{
FT_ERROR(( "T1.Parse_CharStrings : unexpected return\n" ));
goto Syntax_Error;
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
zone--;
ip = zone->cursor;
limit = zone->limit;
decoder->zone = zone;
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_dotsection: /*********************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " dotsection" ));
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_hstem: /**************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " hstem" ));
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_hstem3: /*************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " hstem3" ));
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_vstem: /**************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " vstem" ));
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_vstem3: /*************************************************/
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " vstem3" ));
break;
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
case op_setcurrentpoint: /*****************************************/
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
{
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( " setcurrentpoint" ));
FT_ERROR(( "T1.Parse_CharStrings : unexpected SETCURRENTPOINT\n" ));
goto Syntax_Error;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
}
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
default:
FT_ERROR(( "T1.Parse_CharStrings : unhandled opcode %d\n", op ));
goto Syntax_Error;
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
decoder->top = top;
} /* general operator processing */
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
} /* while ip < limit */
updated version of the experimental Type 1 driver (this thing now works even better than the "regular" driver, but is much smaller). Provides no hinter !!
2000-02-15 13:55:57 +01:00
FT_TRACE4(( "..end..\n\n" ));
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
return error;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
Syntax_Error:
return T1_Err_Syntax_Error;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
Stack_Underflow:
return T1_Err_Stack_Underflow;
Memory_Error:
return builder->error;
}
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
/**********************************************************************/
/**********************************************************************/
/**********************************************************************/
/********** *********/
/********** *********/
/********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/
/********** *********/
/********** The following code is in charge of computing *********/
/********** the maximum advance width of the font. It *********/
/********** quickly process each glyph charstring to *********/
/********** extract the value from either a "sbw" or "seac" *********/
/********** operator. *********/
/********** *********/
/**********************************************************************/
/**********************************************************************/
/**********************************************************************/
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
LOCAL_FUNC
T1_Error T1_Compute_Max_Advance( T1_Face face,
T1_Int *max_advance )
{
T1_Error error;
T1_Decoder decoder;
T1_Int glyph_index;
T1_Font* type1 = &face->type1;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
*max_advance = 0;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
/* Initialise load decoder */
T1_Init_Decoder( &decoder );
T1_Init_Builder( &decoder.builder, face, 0, 0 );
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
decoder.builder.metrics_only = 1;
decoder.builder.load_points = 0;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/* For each glyph, parse the glyph charstring and extract */
/* the advance width.. */
for ( glyph_index = 0; glyph_index < type1->num_glyphs; glyph_index++ )
{
/* now get load the unscaled outline */
error = T1_Parse_CharStrings( &decoder,
type1->charstrings [glyph_index],
type1->charstrings_len[glyph_index],
type1->num_subrs,
type1->subrs,
type1->subrs_len );
/* ignore the error if one occured - skip to next glyph */
(void)error;
}
*max_advance = decoder.builder.advance.x;
return T1_Err_Ok;
}
/**********************************************************************/
/**********************************************************************/
/**********************************************************************/
/********** *********/
/********** *********/
/********** UNHINTED GLYPH LOADER *********/
/********** *********/
/********** The following code is in charge of loading a *********/
/********** single outline. It completely ignores hinting *********/
/********** and is used when FT_LOAD_NO_HINTING is set. *********/
/********** *********/
/**********************************************************************/
/**********************************************************************/
/**********************************************************************/
LOCAL_FUNC
T1_Error T1_Load_Glyph( T1_GlyphSlot glyph,
T1_Size size,
T1_Int glyph_index,
T1_Int load_flags )
{
T1_Error error;
T1_Decoder decoder;
T1_Face face = (T1_Face)glyph->root.face;
T1_Bool hinting;
T1_Font* type1 = &face->type1;
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
if (load_flags & FT_LOAD_NO_RECURSE)
load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
glyph->x_scale = size->root.metrics.x_scale;
glyph->y_scale = size->root.metrics.y_scale;
glyph->root.outline.n_points = 0;
glyph->root.outline.n_contours = 0;
hinting = ( load_flags & FT_LOAD_NO_SCALE ) == 0 &&
( load_flags & FT_LOAD_NO_HINTING ) == 0;
glyph->root.format = ft_glyph_format_none;
{
The Type 1 experimental driver was updated - small reduction of the code size of "t1encode.c" - removed the hinter (not useful with the upcoming auto-hinter..) - updated "t1load.c" to reduce warnings with Visual C++ - considerably changed the glyph loader (it is simpler) Beware, this code is still experimental, and is _not_ debugged. I don't even guarantee that it works for now - David
2000-02-02 13:20:53 +01:00
T1_Init_Decoder( &decoder );
T1_Init_Builder( &decoder.builder, face, size, glyph );
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
decoder.builder.no_recurse = !!(load_flags & FT_LOAD_NO_RECURSE);
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
/* now load the unscaled outline */
error = T1_Parse_CharStrings( &decoder,
type1->charstrings [glyph_index],
type1->charstrings_len[glyph_index],
type1->num_subrs,
type1->subrs,
type1->subrs_len );
/* save new glyph tables */
T1_Done_Builder( &decoder.builder );
}
/* Now, set the metrics.. - this is rather simple, as : */
/* the left side bearing is the xMin, and the top side */
/* bearing the yMax.. */
if (!error)
{
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
/* for composite glyphs, return only the left side bearing and the */
/* advance width.. */
if ( load_flags & FT_LOAD_NO_RECURSE )
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
{
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x;
glyph->root.metrics.horiAdvance = decoder.builder.advance.x;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
}
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
else
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
{
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
FT_BBox cbox;
FT_Glyph_Metrics* metrics = &glyph->root.metrics;
/* copy the _unscaled_ advance width */
metrics->horiAdvance = decoder.builder.advance.x;
/* make up vertical metrics */
metrics->vertBearingX = 0;
metrics->vertBearingY = 0;
metrics->vertAdvance = 0;
glyph->root.format = ft_glyph_format_outline;
glyph->root.outline.flags &= ft_outline_owner;
fixed another small bug. The metrics were not computed correctly..
2000-04-14 13:29:14 +02:00
if ( size && size->root.metrics.y_ppem < 24 )
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
glyph->root.outline.flags |= ft_outline_high_precision;
simple fix required by the auto-hinting module (sets the ft_outline_reverse_fill bit_flag)
2000-03-30 10:43:03 +02:00
glyph->root.outline.flags |= ft_outline_reverse_fill;
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
/*
glyph->root.outline.second_pass = TRUE;
glyph->root.outline.high_precision = ( size->root.metrics.y_ppem < 24 );
glyph->root.outline.dropout_mode = 2;
*/
if ( (load_flags & FT_LOAD_NO_SCALE) == 0 )
{
/* scale the outline and the metrics */
T1_Int n;
FT_Outline* cur = &decoder.builder.base;
T1_Vector* vec = cur->points;
T1_Fixed x_scale = glyph->x_scale;
T1_Fixed y_scale = glyph->y_scale;
/* First of all, scale the points */
for ( n = cur->n_points; n > 0; n--, vec++ )
{
vec->x = FT_MulFix( vec->x, x_scale );
vec->y = FT_MulFix( vec->y, y_scale );
}
fixed another small bug. The metrics were not computed correctly..
2000-04-14 13:29:14 +02:00
FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
support for FT_LOAD_NO_RECURSE needed by the auto-hinter
2000-03-28 13:19:28 +02:00
/* Then scale the metrics */
metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale );
metrics->vertBearingX = FT_MulFix( metrics->vertBearingX, x_scale );
metrics->vertBearingY = FT_MulFix( metrics->vertBearingY, y_scale );
metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, x_scale );
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
}
fixed another small bug. The metrics were not computed correctly..
2000-04-14 13:29:14 +02:00
/* compute the other metrics */
FT_Outline_Get_CBox( &glyph->root.outline, &cbox );
/* grid fit the bounding box if necessary */
if (hinting)
{
cbox.xMin &= -64;
cbox.yMin &= -64;
cbox.xMax = ( cbox.xMax+63 ) & -64;
cbox.yMax = ( cbox.yMax+63 ) & -64;
}
metrics->width = cbox.xMax - cbox.xMin;
metrics->height = cbox.yMax - cbox.yMin;
metrics->horiBearingX = cbox.xMin;
metrics->horiBearingY = cbox.yMax;
added a new experimental Type 1 driver. This version sports several improvements compared to "src/type1". Briefly : - the postscript-like interpreter is now gone. We now perform pattern-matching to load our font content. The resultant code is much faster, smaller, and easier to maintain. For a more detailed description, see the comments at the start of "src/type1z/t1objs.c" - the glyph loader will be greatly simplified really soon, and the clumsy hinter will be ditched in favor of a more general auto-hinting module (when we get one). The goal is to strip down the Type1 driver to about 15-20 Kb. This is still an experimental version. It is added to the repository for archiving. You should not try to use it for now (it won't work because some crucial parts are _knowingly_ ignored for now !). Note that the "old" type1 driver will probably move to the "demos/src" directory, in order to show how one can replace one given font driver at runtime (and to provide the functionality of the "t1dump" program).
2000-01-27 15:02:04 +01:00
}
}
return error;
}