================= libtorrent manual ================= .. include:: header.rst .. contents:: Table of contents :depth: 2 :backlinks: none tuning libtorrent ================= libtorrent expose most parameters used in the bittorrent engine for customization through the settings_pack. This makes it possible to test and tweak the parameters for certain algorithms to make a client that fits a wide range of needs. From low memory embedded devices to servers seeding thousands of torrents. The default settings in libtorrent are tuned for an end-user bittorrent client running on a normal desktop computer. This document describes techniques to benchmark libtorrent performance and how parameters are likely to affect it. profiling ========= libtorrent is instrumented with a number of counters and gauges you can have access to via the ``session_stats_alert``. First, enable these alerts in the alert mask:: settings_pack p; p.set_int(settings_mask::alert_mask, alert::stats_notification); ses.apply_settings(p); Then print alerts to a file:: std::vector alerts; ses.pop_alerts(&alerts); for (auto* a : alerts) { std::cout << a->message() << "\n"; } If you want to separate generic alerts from session stats, you can filter on the alert category in the alert, ``alert::category()``. The alerts with data will have the type session_stats_alert and there is one session_log_alert that will be posted on startup containing the column names for all metrics. Logging this line will greatly simplify interpreting the output. The python scrip in ``tools/parse_session_stats.py`` can parse the resulting file and produce graphs of relevant stats. It requires gnuplot_. .. _gnuplot: http://www.gnuplot.info reducing memory footprint ========================= These are things you can do to reduce the memory footprint of libtorrent. You get some of this by basing your default settings_pack on the min_memory_usage() setting preset function. Keep in mind that lowering memory usage will affect performance, always profile and benchmark your settings to determine if it's worth the trade-off. The typical buffer usage of libtorrent, for a single download, with the cache size set to 256 blocks (256 * 16 kiB = 4 MiB) is:: read cache: 128.6 (2058 kiB) write cache: 103.5 (1656 kiB) receive buffers: 7.3 (117 kiB) send buffers: 4.8 (77 kiB) hash temp: 0.001 (19 Bytes) The receive buffers is proportional to the number of connections we make, and is limited by the total number of connections in the session (default is 200). The send buffers is proportional to the number of upload slots that are allowed in the session. The default is auto configured based on the observed upload rate. The read and write cache can be controlled (see section below). The "hash temp" entry size depends on whether or not hashing is optimized for speed or memory usage. In this test run it was optimized for memory usage. disable disk cache ------------------ The bulk of the memory libtorrent will use is used for the disk cache. To save the absolute most amount of memory, you can disable the cache by setting settings_pack::cache_size to 0. You might want to consider using the cache but just disable caching read operations. You do this by settings settings_pack::use_read_cache to false. This is the main factor in how much memory will be used by the client. Keep in mind that you will degrade performance by disabling the cache. You should benchmark the disk access in order to make an informed trade-off. remove torrents --------------- Torrents that have been added to libtorrent will inevitably use up memory, even when it's paused. A paused torrent will not use any peer connection objects or any send or receive buffers though. Any added torrent holds the entire .torrent file in memory, it also remembers the entire list of peers that it's heard about (which can be fairly long unless it's capped). It also retains information about which blocks and pieces we have on disk, which can be significant for torrents with many pieces. If you need to minimize the memory footprint, consider removing torrents from the session rather than pausing them. This will likely only make a difference when you have a very large number of torrents in a session. The downside of removing them is that they will no longer be auto-managed. Paused auto managed torrents are scraped periodically, to determine which torrents are in the greatest need of seeding, and libtorrent will prioritize to seed those. socket buffer sizes ------------------- You can make libtorrent explicitly set the kernel buffer sizes of all its peer sockets. If you set this to a low number, you may see reduced throughput, especially for high latency connections. It is however an opportunity to save memory per connection, and might be worth considering if you have a very large number of peer connections. This memory will not be visible in your process, this sets the amount of kernel memory is used for your sockets. Change this by setting settings_pack::recv_socket_buffer_size and settings_pack::send_socket_buffer_size. peer list size -------------- The default maximum for the peer list is 4000 peers. For IPv4 peers, each peer entry uses 32 bytes, which ends up using 128 kB per torrent. If seeding 4 popular torrents, the peer lists alone uses about half a megabyte. The default limit is the same for paused torrents as well, so if you have a large number of paused torrents (that are popular) it will be even more significant. If you're short of memory, you should consider lowering the limit. 500 is probably enough. You can do this by setting settings_pack::max_peerlist_size to the max number of peers you want in a torrent's peer list. This limit applies per torrent. For 5 torrents, the total number of peers in peer lists will be 5 times the setting. You should also lower the same limit but for paused torrents. It might even make sense to set that even lower, since you only need a few peers to start up while waiting for the tracker and DHT to give you fresh ones. The max peer list size for paused torrents is set by settings_pack::max_paused_peerlist_size. The drawback of lowering this number is that if you end up in a position where the tracker is down for an extended period of time, your only hope of finding live peers is to go through your list of all peers you've ever seen. Having a large peer list will also help increase performance when starting up, since the torrent can start connecting to peers in parallel with connecting to the tracker. send buffer watermark --------------------- The send buffer watermark controls when libtorrent will ask the disk I/O thread to read blocks from disk, and append it to a peer's send buffer. When the send buffer has fewer than or equal number of bytes as settings_pack::send_buffer_watermark, the peer will ask the disk I/O thread for more data to send. The trade-off here is between wasting memory by having too much data in the send buffer, and hurting send rate by starving out the socket, waiting for the disk read operation to complete. If your main objective is memory usage and you're not concerned about being able to achieve high send rates, you can set the watermark to 9 bytes. This will guarantee that no more than a single (16 kiB) block will be on the send buffer at a time, for all peers. This is the least amount of memory possible for the send buffer. You should benchmark your max send rate when adjusting this setting. If you have a very fast disk, you are less likely see a performance hit. reduce executable size ---------------------- Compilers generally add a significant number of bytes to executables that make use of C++ exceptions. By disabling exceptions (-fno-exceptions on GCC), you can reduce the executable size with up to 45%. In order to build without exception support, you need to patch parts of boost. Also make sure to optimize for size when compiling. Another way of reducing the executable size is to disable code that isn't used. There are a number of ``TORRENT_*`` macros that control which features are included in libtorrent. If these macros are used to strip down libtorrent, make sure the same macros are defined when building libtorrent as when linking against it. If these are different the structures will look different from the libtorrent side and from the client side and memory corruption will follow. One, probably, safe macro to define is ``TORRENT_NO_DEPRECATE`` which removes all deprecated functions and struct members. As long as no deprecated functions are relied upon, this should be a simple way to eliminate a little bit of code. For all available options, see the `building libtorrent`_ section. .. _`building libtorrent`: building.html high performance seeding ======================== In the case of a high volume seed, there are two main concerns. Performance and scalability. This translates into high send rates, and low memory and CPU usage per peer connection. file pool --------- libtorrent keeps an LRU file cache. Each file that is opened, is stuck in the cache. The main purpose of this is because of anti-virus software that hooks on file-open and file close to scan the file. Anti-virus software that does that will significantly increase the cost of opening and closing files. However, for a high performance seed, the file open/close might be so frequent that it becomes a significant cost. It might therefore be a good idea to allow a large file descriptor cache. Adjust this though settings_pack::file_pool_size. Don't forget to set a high rlimit for file descriptors in your process as well. This limit must be high enough to keep all connections and files open. disk cache ---------- You typically want to set the cache size to as high as possible. The settings_pack::cache_size is specified in 16 kiB blocks. Since you're seeding, the cache would be useless unless you also set settings_pack::use_read_cache to true. In order to increase the possibility of read cache hits, set the settings_pack::cache_expiry to a large number. This won't degrade anything as long as the client is only seeding, and not downloading any torrents. There's a *guided cache* mode. This means the size of the read cache line that's stored in the cache is determined based on the upload rate to the peer that triggered the read operation. The idea being that slow peers don't use up a disproportional amount of space in the cache. This is enabled through settings_pack::guided_read_cache. In cases where the assumption is that the cache is only used as a read-ahead, and that no other peer will ever request the same block while it's still in the cache, the read cache can be set to be *volatile*. This means that every block that is requested out of the read cache is removed immediately. This saves a significant amount of cache space which can be used as read-ahead for other peers. To enable volatile read cache, set settings_pack::volatile_read_cache to true. uTP-TCP mixed mode ------------------ libtorrent supports uTP_, which has a delay based congestion controller. In order to avoid having a single TCP bittorrent connection completely starve out any uTP connection, there is a mixed mode algorithm. This attempts to detect congestion on the uTP peers and throttle TCP to avoid it taking over all bandwidth. This balances the bandwidth resources between the two protocols. When running on a network where the bandwidth is in such an abundance that it's virtually infinite, this algorithm is no longer necessary, and might even be harmful to throughput. It is advised to experiment with the settings_pack::mixed_mode_algorithm, setting it to settings_pack::prefer_tcp. This setting entirely disables the balancing and un-throttles all connections. On a typical home connection, this would mean that none of the benefits of uTP would be preserved (the modem's send buffer would be full at all times) and uTP connections would for the most part be squashed by the TCP traffic. .. _`uTP`: utp.html send buffer low watermark ------------------------- libtorrent uses a low watermark for send buffers to determine when a new piece should be requested from the disk I/O subsystem, to be appended to the send buffer. The low watermark is determined based on the send rate of the socket. It needs to be large enough to not draining the socket's send buffer before the disk operation completes. The watermark is bound to a max value, to avoid buffer sizes growing out of control. The default max send buffer size might not be enough to sustain very high upload rates, and you might have to increase it. It's specified in bytes in settings_pack::send_buffer_watermark. peers ----- First of all, in order to allow many connections, set the global connection limit high, settings_pack::connections_limit. Also set the upload rate limit to infinite, settings_pack::upload_rate_limit, 0 means infinite. When dealing with a large number of peers, it might be a good idea to have slightly stricter timeouts, to get rid of lingering connections as soon as possible. There are a couple of relevant settings: settings_pack::request_timeout, settings_pack::peer_timeout and settings_pack::inactivity_timeout. For seeds that are critical for a delivery system, you most likely want to allow multiple connections from the same IP. That way two people from behind the same NAT can use the service simultaneously. This is controlled by settings_pack::allow_multiple_connections_per_ip. In order to always unchoke peers, turn off automatic unchoke by setting settings_pack::choking_algorithm to settings_pack::fixed_slot_choker and set the number of upload slots to a large number via settings_pack::unchoke_slots_limit, or use -1 (which means infinite). torrent limits -------------- To seed thousands of torrents, you need to increase the settings_pack::active_limit and settings_pack::active_seeds. SHA-1 hashing ------------- When downloading at very high rates, it is possible to have the CPU be the bottleneck for passing every downloaded byte through SHA-1. In order to enable calculating SHA-1 hashes in parallel, on multi-core systems, set settings_pack::aio_threads to the number of threads libtorrent should perform I/O and do SHA-1 hashing in. Only if that thread is close to saturating one core does it make sense to increase the number of threads. scalability =========== In order to make more efficient use of the libtorrent interface when running a large number of torrents simultaneously, one can use the ``session::get_torrent_status()`` call together with ``session::post_torrent_updates()``. Keep in mind that every call into libtorrent that return some value have to block your thread while posting a message to the main network thread and then wait for a response. Calls that don't return any data will simply post the message and then immediately return, performing the work asynchronously. The time this takes might become significant once you reach a few hundred torrents, depending on how many calls you make to each torrent and how often. ``session::get_torrent_status()`` lets you query the status of all torrents in a single call. This will actually loop through all torrents and run a provided predicate function to determine whether or not to include it in the returned vector. To use ``session::post_torrent_updates()`` torrents need to have the ``flag_update_subscribe`` flag set. When post_torrent_updates() is called, a state_update_alert alert is posted, with all the torrents that have updated since the last time this function was called. The client have to keep its own state of all torrents, and update it based on this alert. benchmarking ============ There is a bunch of built-in instrumentation of libtorrent that can be used to get an insight into what it's doing and how well it performs. This instrumentation is enabled by defining preprocessor symbols when building. There are also a number of scripts that parses the log files and generates graphs (requires gnuplot and python). understanding the disk threads ============================== *This section is somewhat outdated, there are potentially more than one disk thread* All disk operations are funneled through a separate thread, referred to as the disk thread. The main interface to the disk thread is a queue where disk jobs are posted, and the results of these jobs are then posted back on the main thread's io_service. A disk job is essentially one of: 1. write this block to disk, i.e. a write job. For the most part this is just a matter of sticking the block in the disk cache, but if we've run out of cache space or completed a whole piece, we'll also flush blocks to disk. This is typically very fast, since the OS just sticks these buffers in its write cache which will be flushed at a later time, presumably when the drive head will pass the place on the platter where the blocks go. 2. read this block from disk. The first thing that happens is we look in the cache to see if the block is already in RAM. If it is, we'll return immediately with this block. If it's a cache miss, we'll have to hit the disk. Here we decide to defer this job. We find the physical offset on the drive for this block and insert the job in an ordered queue, sorted by the physical location. At a later time, once we don't have any more non-read jobs left in the queue, we pick one read job out of the ordered queue and service it. The order we pick jobs out of the queue is according to an elevator cursor moving up and down along the ordered queue of read jobs. If we have enough space in the cache we'll read read_cache_line_size number of blocks and stick those in the cache. This defaults to 32 blocks. If the system supports asynchronous I/O (Windows, Linux, Mac OS X, BSD, Solars for instance), jobs will be issued immediately to the OS. This especially increases read throughput, since the OS has a much greater flexibility to reorder the read jobs. Other disk job consist of operations that needs to be synchronized with the disk I/O, like renaming files, closing files, flushing the cache, updating the settings etc. These are relatively rare though. contributions ============= If you have added instrumentation for some part of libtorrent that is not covered here, or if you have improved any of the parser scrips, please consider contributing it back to the project. If you have run tests and found that some algorithm or default value in libtorrent are suboptimal, please contribute that knowledge back as well, to allow us to improve the library. If you have additional suggestions on how to tune libtorrent for any specific use case, please let us know and we'll update this document.