premiere-libtorrent/include/libtorrent/kademlia/routing_table.hpp

/*

Copyright (c) 2006-2016, Arvid Norberg
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:

    * Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.
    * Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in
      the documentation and/or other materials provided with the distribution.
    * Neither the name of the author nor the names of its
      contributors may be used to endorse or promote products derived
      from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

*/

#ifndef ROUTING_TABLE_HPP
#define ROUTING_TABLE_HPP

#include "libtorrent/aux_/disable_warnings_push.hpp"

#include <vector>
#include <set>

#include <boost/cstdint.hpp>
#include <boost/utility.hpp>
#include <boost/tuple/tuple.hpp>
#include <array>
#include <boost/noncopyable.hpp>
#include <boost/unordered_set.hpp>

#include "libtorrent/aux_/disable_warnings_pop.hpp"

#include <libtorrent/kademlia/node_id.hpp>
#include <libtorrent/kademlia/node_entry.hpp>
#include <libtorrent/session_settings.hpp>
#include <libtorrent/assert.hpp>
#include <libtorrent/time.hpp>

namespace libtorrent
{
#ifndef TORRENT_NO_DEPRECATE
	struct session_status;
#endif
	struct dht_routing_bucket;
}

namespace libtorrent { namespace dht
{
struct dht_logger;

typedef std::vector<node_entry> bucket_t;

struct routing_table_node
{
	bucket_t replacements;
	bucket_t live_nodes;
};

struct ip_set
{
	void insert(address addr);
	size_t count(address addr);
	void erase(address addr);

	void clear()
	{
		m_ip4s.clear();
#if TORRENT_USE_IPV6
		m_ip6s.clear();
#endif
	}

	bool operator==(ip_set const& rh)
	{
#if TORRENT_USE_IPV6
		return m_ip4s == rh.m_ip4s && m_ip6s == rh.m_ip6s;
#else
		return m_ip4s == rh.m_ip4s;
#endif
	}

	// these must be multisets because there can be multiple routing table
	// entries for a single IP when restrict_routing_ips is set to false
	boost::unordered_multiset<address_v4::bytes_type> m_ip4s;
#if TORRENT_USE_IPV6
	boost::unordered_multiset<address_v6::bytes_type> m_ip6s;
#endif
};

// differences in the implementation from the description in
// the paper:
//
// * Nodes are not marked as being stale, they keep a counter
// 	that tells how many times in a row they have failed. When
// 	a new node is to be inserted, the node that has failed
// 	the most times is replaced. If none of the nodes in the
// 	bucket has failed, then it is put in the replacement
// 	cache (just like in the paper).

namespace impl
{
	template <typename F>
	inline void forwarder(void* userdata, node_entry const& node)
	{
		F* f = reinterpret_cast<F*>(userdata);
		(*f)(node);
	}
}

TORRENT_EXTRA_EXPORT bool compare_ip_cidr(address const& lhs, address const& rhs);

class TORRENT_EXTRA_EXPORT routing_table : boost::noncopyable
{
public:
	// TODO: 3 to improve memory locality and scanning performance, turn the
	// routing table into a single vector with boundaries for the nodes instead.
	// Perhaps replacement nodes should be in a separate vector.
	typedef std::vector<routing_table_node> table_t;

	routing_table(node_id const& id, udp proto
		, int bucket_size
		, dht_settings const& settings
		, dht_logger* log);

#ifndef TORRENT_NO_DEPRECATE
	void status(session_status& s) const;
#endif

	void status(std::vector<dht_routing_bucket>& s) const;

	void node_failed(node_id const& id, udp::endpoint const& ep);

	// adds an endpoint that will never be added to
	// the routing table
	void add_router_node(udp::endpoint router);

	// iterates over the router nodes added
	typedef std::set<udp::endpoint>::const_iterator router_iterator;
	router_iterator router_begin() const { return m_router_nodes.begin(); }
	router_iterator router_end() const { return m_router_nodes.end(); }

	enum add_node_status_t {
		failed_to_add = 0,
		node_added,
		need_bucket_split
	};
	add_node_status_t add_node_impl(node_entry e);

	bool add_node(node_entry e);

	// this function is called every time the node sees
	// a sign of a node being alive. This node will either
	// be inserted in the k-buckets or be moved to the top
	// of its bucket.
	bool node_seen(node_id const& id, udp::endpoint ep, int rtt);

	// this may add a node to the routing table and mark it as
	// not pinged. If the bucket the node falls into is full,
	// the node will be ignored.
	void heard_about(node_id const& id, udp::endpoint const& ep);

	// change our node ID. This can be expensive since nodes must be moved around
	// and potentially dropped
	void update_node_id(node_id id);

	node_entry const* next_refresh();

	enum
	{
		// nodes that have not been pinged are considered failed by this flag
		include_failed = 1
	};

	// fills the vector with the count nodes from our buckets that
	// are nearest to the given id.
	void find_node(node_id const& id, std::vector<node_entry>& l
		, int options, int count = 0);
	void remove_node(node_entry* n
		, table_t::iterator bucket) ;

	int bucket_size(int bucket) const
	{
		int num_buckets = int(m_buckets.size());
		if (num_buckets == 0) return 0;
		if (bucket >= num_buckets) bucket = num_buckets - 1;
		table_t::const_iterator i = m_buckets.begin();
		std::advance(i, bucket);
		return int(i->live_nodes.size());
	}

	template <typename F>
	void for_each_node(F f)
	{
		for_each_node(&impl::forwarder<F>, &impl::forwarder<F>, reinterpret_cast<void*>(&f));
	}

	void for_each_node(void (*)(void*, node_entry const&)
		, void (*)(void*, node_entry const&), void* userdata) const;

	int bucket_size() const { return m_bucket_size; }

	// returns the number of nodes in the main buckets, number of nodes in the
	// replacement buckets and the number of nodes in the main buckets that have
	// been pinged and confirmed up
	boost::tuple<int, int, int> size() const;

	boost::int64_t num_global_nodes() const;

	// the number of bits down we have full buckets
	// i.e. essentially the number of full buckets
	// we have
	int depth() const;

	int num_active_buckets() const { return int(m_buckets.size()); }

	void replacement_cache(bucket_t& nodes) const;

#if defined TORRENT_DEBUG
	// used for debug and monitoring purposes. This will print out
	// the state of the routing table to the given stream
	void print_state(std::ostream& os) const;
#endif

	int bucket_limit(int bucket) const;

#if TORRENT_USE_INVARIANT_CHECKS
	void check_invariant() const;
#endif

	bool is_full(int bucket) const;

	bool native_address(address addr) const
	{
		return (addr.is_v4() && m_protocol == udp::v4())
			|| (addr.is_v6() && m_protocol == udp::v6());
	}

	bool native_endpoint(udp::endpoint ep) const
	{ return ep.protocol() == m_protocol; }

private:

#ifndef TORRENT_DISABLE_LOGGING
	dht_logger* m_log;
#endif

	table_t::iterator find_bucket(node_id const& id);

	void split_bucket();

	// return a pointer the node_entry with the given endpoint
	// or 0 if we don't have such a node. Both the address and the
	// port has to match
	node_entry* find_node(udp::endpoint const& ep
		, routing_table::table_t::iterator* bucket);

	dht_settings const& m_settings;

	// (k-bucket, replacement cache) pairs
	// the first entry is the bucket the furthest
	// away from our own ID. Each time the bucket
	// closest to us (m_buckets.back()) has more than
	// bucket size nodes in it, another bucket is
	// added to the end and it's split up between them
	table_t m_buckets;

	node_id m_id; // our own node id
	udp m_protocol; // protocol this table is for

	// the last seen depth (i.e. levels in the routing table)
	// it's mutable because it's updated by depth(), which is const
	mutable int m_depth;

	// the last time we refreshed our own bucket
	// refreshed every 15 minutes
	mutable time_point m_last_self_refresh;

	// this is a set of all the endpoints that have
	// been identified as router nodes. They will
	// be used in searches, but they will never
	// be added to the routing table.
	std::set<udp::endpoint> m_router_nodes;

	// these are all the IPs that are in the routing
	// table. It's used to only allow a single entry
	// per IP in the whole table.
	ip_set m_ips;

	// constant called k in paper
	int m_bucket_size;
};

} } // namespace libtorrent::dht

#endif // ROUTING_TABLE_HPP