include/internal/services/svtteng.h, src/base/ftobjs.c,
src/truetype/ttdriver.c:
adding a new API named FT_Get_TrueType_Engine_Type to determine
wether we have a patented, unpatented or unimplemented TrueType
bytecode interpreter.
the FT_Get_Module_Flags API was removed consequently.
src/sfnt/ttsbit.h, src/sfnt/ttsbit.c: moving the definition
of 'set_sbit_strike' and 'load_sbit_metrics' to their 2.1.8
location. This is used to support binary compatibility with
the X.Org server's libXfont library.
note that this disables memory optimizations for the embedded
bitmap loader.Sigh....
anymore, this is used to ensure that all FT_BASE internal
functions are available for dynamic linking
* include/freetype/ftcache.h, src/cache/ftcbasic.c,
src/cache/ftccmap.c: try to revive old functions of the
cache sub-system. We also try to support FTC_ImageCache_Lookup
and FTC_ImageCache_SBit with legacy signatures through a gross
hack (hope it works)
unused `max_points' and `max_contours'.
* src/cid/cidobjs.c (cid_face_init), src/type1/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init): Update.
* include/freetype/internal/tttypes.h (TT_FaceRec): Remove unused
`max_components'.
* src/truetype/ttinterp.h (TT_ExecContextRec): Remove unused
`loadSize' and `loadStack'.
* src/truetype/ttinterp.c (TT_Done_Context, TT_Load_Context),
src/sfnt/ttload.c (tt_face_load_maxp): Update.
* src/cff/cffobjs.h (cff_size_select), src/sfnt/sfdriver.c
(sfnt_interface), src/truetype/ttdriver.c (tt_size_request): Fix
compiler errors/warnings when TT_CONFIG_OPTION_EMBEDDED_BITMAPS is not
defined.
* src/sfnt/ttmtx.c (tt_face_load_hmtx, tt_face_get_metrics): Fix
possible segment faults for the non-FT_OPTIMIZE_MEMORY'ed versions.
(finally!)
For most OpenType tables, `tt_face_load_xxxx' simply loads the table
and `face->root' is set later in `sfnt_load_face'. Here, we try to
make this work for _all_ tables.
* src/sfnt/ttsbit.c, src/sfnt/ttsbit0.c, src/sfnt/ttload.c,
src/sfnt/ttmtx.c: all `tt_face_load_xxxx' should load the table and
then exit. Error handling or setting face->root is done later in
`sfnt_load_face'.
Pretty trace messages.
* src/sfnt/sfobjs.c (sfnt_load_face): Work harder.
Mac bitmap-only fonts are not scalable.
Check that `face->header.Units_Per_EM' is not zero.
(LOAD_, LOADM_): Pretty trace messages.
* src/sfnt/ttsbit0.c (tt_face_load_strike_metrics): Read metrics from
`eblc'.
* src/sfnt/ttcmap.c (tt_face_build_cmaps), src/sfnt/ttpost.c
(load_format_20, load_format_25, tt_face_get_ps_name): Use
face->max_profile.numGlyphs, instead of face->root.num_glyphs.
documentation that negative strength values are possible.
Give an example call.
* include/freetype/freetype.h (FT_GlyphSlotRec): Improve
documentation of `outline' field.
* src/sfnt/sfobjc.s: Inckude FT_INTERNAL_DEBUG_H.
* src/sfnt/sfdriver.c: Include ttmtx.h.
* src/autofit/afcjk.c: Include aftypes.h and aflatin.h.
directory (offset table and table directory) as a normal table like
the others. This also means that TTC is no longer recognized there,
but in `init_face'.
* include/freetype/internal/sfnt.h (SFNT_Interface),
src/sfnt/sfdriver.c: `load_sfnt_header' and `load_directory' are
combined and renamed to `load_font_dir'.
* src/sfnt/ttload.h, src/sfnt/ttload.c:
s/sfnt_dir_check/check_table_dir/.
`sfnt_init' is moved to sfobjs.c and renamed to `sfnt_open_font'.
`tt_face_load_sfnt_header' and `tt_face_load_directory' are combined
and renamed to `tt_face_load_font_dir'.
* src/sfnt/sfobjs.c (sfnt_init_face): Recognize TTC here.
after the tables' tags; `hdmx' is TrueType-specific and thus the code
is moved to the truetype module; `get_metrics' is moved here from the
truetype module so that the code can be shared with the cff module.
This pass involves no real changes. That is, the code is moved
verbatim mostly. The only exception is the return value of
`tt_face_get_metrics'.
* include/freetype/internal/sfnt.h, src/sfnt/rules.mk,
src/sfnt/sfdriver.c, src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttload.h, src/sfnt/ttsbit.c,
src/sfnt/ttsbit.h, src/sfnt/ttsbit0.c: Clean up the SFNT_Interface.
* src/sfnt/ttmtx.c, src/sfnt/ttmtx.h: Metrics-related tables' loading
and parsing code is moved here.
Move `tt_face_get_metrics' here from the truetype module. The return
value is changed from `void' to `FT_Error'.
* include/freetype/internal/fttrace.h: New trace: ttmtx.
* src/truetype/ttpload.c, src/truetype/ttpload.h: `hdmx' loading and
parsing code is moved here.
New function `tt_face_load_prep' splitted from `tt_face_load_fpgm'.
`tt_face_load_fpgm' returns `FT_Err_Ok' if `fpgm' doesn't exist.
* src/cff/cffgload.c, src/cff/cffobjs.c: Update.
* src/truetype/ttgload.c, src/truetype/ttobjs.c: Update.
to enable autofit CJK script support. (#define'd by default)
* src/autofit/aflatin.h (AF_LATIN_CONSTANT): New macro.
* src/autofit/aflatin.c (af_latin_metrics_init_widths): Make sure that
`edge_distance_threshold' is always set.
(af_latin_hints_link_segments): Potential divide by 0 bug.
Use latin constant in the scoring formula.
* src/autofit/afcjk.c: Minor updates due to the above three changes.
* docs/TODO, docs/CHANGES: Updated.
sufficient to modify a single file, `modules.cfg', to control the
inclusion of modules and base extension files.
This change also fixes the creation of ftmodule.h; it now depends on
`modules.cfg' and thus is rebuilt only if necessary.
Finally, a version of `ftoption.h' in OBJ_DIR is preferred over the
default location.
* modules.cfg: New file.
* builds/freetype.mk: Don't include `modules.mk'.
Include all `rules.mk' files as specified in `modules.cfg'.
(FTOPTION_FLAG, FTOPTION_H): New variables.
(FT_CFLAGS): Add macro definition for FT_CONFIG_MODULES_H.
Add FTOPTION_FLAG.
($(FT_INIT_OBJ)): Don't use FT_MODULE_LIST.
(CONFIG_H): Add FTMODULE_H and FTOPTION_H.
(INCLUDES): Add DEVEL_DIR.
(INCLUDE_FLAGS, FTSYS_SRC, FTSYS_OBJ, FTDEBUG_SRC, FTDEBUG_OBJ,
OBJ_M, OBJ_S): Use `:=', not `='.
(remove_ftmodule_h): New phony target to delete `ftmodule.h'.
(distclean): Add remove_ftmodule_h.
* builds/modules.mk: (MODULE_LIST): Removed.
(make_module_list, clean_module_list): Replace targets
with...
(FTMODULE_H_INIT, FTMODULE_H_CREATE, FTMODULE_H_DONE): New
variables. Reason for the change is that it is not possible to have
a phony prerequisite which is run only if the target file must be
rebuilt (phony prerequisites act like subroutines and are *always*
executed). We only want to rebuild `ftmodule.h' if `module.cfg' is
changed.
Update all callers.
($FTMODULE_H)): Rule to create `ftmodule.h', depending on
`modules.cfg'.
* builds/toplevel.mk: Rewrite and simplify module handling.
(MODULES_CFG, FTMODULE_H): New variables.
Include MODULES_CFG.
(MODULES): New variable to include all `module.mk' and `rules.mk'
files. We no longer use make's `wildcard' function for this.
* Makefile (USE_MODULES): Remove. Update all users.
(OBJ_DIR): Define it here.
* src/*/module.mk: Change
make_module_list: foo
foo: ...
to
FTMODULE_H_COMMANDS += FOO
define FOO
...
endef
in all files. `FTMODULE_H_COMMANDS' is used in `FTMODULE_H_CREATE'.
* src/base/rules.mk (BASE_EXT_SRC): Use BASE_EXTENSIONS.
* builds/unix/detect.mk (setup): Always execute `configure' script.
(have_mk): Rename to...
(have_Makefile): This.
Don't use `strip' function.
* builds/unix/unix.mk: Include `install.mk' only if BUILD_PROJECT is
defined.
(have_mk): Don't use `strip' function.
Test for unix-def.mk in OBJ_DIR, not BUILD_DIR (and invert the test
accordingly).
* builds/unix/install.mk (install, uninstall): Handle `ftmodule.h'.
* builds/os2/os2-dev.mk, builds/unix/unix-dev.mk,
builds/win32/w32-bccd.mk, builds/win32/w32-dev.mk: Don't define
BUILD_DIR but DEVEL_DIR for development header files.
* builds/ansi/ansi-def.mk (TOP_DIR, OBJ_DIR),
builds/beos/beos-def.mk (TOP_DIR, OBJ_DIR), builds/unix/unix-def.in
(TOP_DIR, OBJ_DIR): Removed. Defined elsewhere.
* builds/dos/dos-def.mk (OBJ_DIR), builds/os2/os2-def.mk (OBJ_DIR),
builds/win32/win32-def.mk (OBJ_DIR): Removed. Defined elsewhere.
* builds/unix/unixddef.mk: Don't define BUILD_DIR but DEVEL_DIR for
development header files.
Don't define PLATFORM.
* configure: Copy `modules.cfg' to builddir if builddir != srcdir.
Update snippet taken from autoconf's m4sh.m4 to current CVS version.
Be more verbose.
* include/freetype/config/ftmodule.h: Add comments -- this file is
no longer used if FreeType is built with GNU make.
* docs/CHANGES, docs/CUSTOMIZE, docs/INSTALL, docs/INSTALL.ANY,
docs/INSTALL.GNU, docs/INSTALL.UNX: Document new build mechanism.
Other minor updates.
* modules.txt: Removed. Contents included in `modules.cfg'.
* include/freetype/internal/ftmemory.h (FT_QAlloc_Debug,
FT_Free_Debug) [FT_STRICT_ALIASING]: Fix typos.
* src/base/ftdbgmem.c (FT_Alloc_Debug, FT_Realloc_Debug,
FT_QAlloc_Debug, FT_QRealloc_Debug, FT_Free_Debug)
[FT_STRICT_ALIASING]: Implement.
src/psaux/afmparse.c, src/tools/test_afm.c: Read `FontBBox',
`Ascender', and `Descender' from an AFM.
* src/type1/t1afm.c (T1_Read_Metrics): Use the metrics from the AFM.
* include/freetype/freetype.h (FT_FaceRec): Mention that fields may be
changed after file attachment.
the warp hinter isn't active (it shouldn't, still experimental)
* Jamfile, include/freetype/config/ftmodule.h: removed "gxvalid"
and "otvalid" from the list of modules that are linked statically
to a given FreeType library. Functionality has been moved to the
"ftvalid" CVS module.
note also that current Make-based build system still compiles the
modules though...
* include/freetype/config/ftoption.h: added FT_STRICT_ALIASING,
which controls the definitions of the memory management functions
to avoid warnings with recent versions of GCC. this macro is
only here to be disabled, in case we detect problems with the
new scheme.
NOTE: disable macro to use the memory debugger. this will be fixed
later !!
when compiling the library.
* include/freetype/config/ftheader.h: remove inclusions of
internal headers, except if the macro FT2_BUILD_LIBRARY is defined.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
implement an AFM parser. It is used to parse an AFM file.
* src/psaux/psconv.c, src/psaux/psconv.h: New files to provide
conversion functions (e.g, PS real number => FT_Fixed) for the
PS_Parser and AFM_Parser. Some of the functions are taken, with some
modifications, from the psobjs.c
* src/psaux/psobjs.c: Use functions from psconv.c.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c:: Add
`AFM_Parser' to the `psaux' service.
* src/psaux/psaux.c, src/psaux/rules.mk: Include those new files.
* src/tools/test_afm.c: A test program for AFM parser.
* include/freetype/internal/services/svkern.h,
include/freetype/internal/ftserv.h: New service `Kerning'. It is
currently only used to get the track kerning information.
* src/type1/t1driver.c, src/type1/t1objs.c, src/type1/t1afm.c,
src/type1/t1afm.h: Update to use the AFM parser.
Provide the `Kerning' service.
* include/freetype/freetype.h, src/base/ftobjs.c: New API
`FT_Get_Track_Kerning'.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
(PCF_Glyph_Load), src/winfonts/winfnt.c (FNT_Load_Glyph): Don't set
the linear advance fields as they are only for the outline glyphs.
* include/freetype/freetype.h: Documentation updates/clarificatoins.
The meaning of FT_LOAD_FORCE_AUTOHINT is changed so that no real
change need be made to the code.
* src/base/ftobjs.c (FT_Load_Glyph): Resolve flag dependencies and
decide whether to use the auto-hinter according to documentation.
There should to be no real difference.
Some checks (e.g., is text height positve?) after the glyph is loaded.
(FT_Select_Size, FT_Request_Size): Scales are set to wrong values.
Be careful that scales won't be negative.
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
* include/freetype/internal/services/svpscmap.h: Include
FT_INTERNAL_OBJECTS_H.
(PS_Unicode_Index_Func): Removed. Unused.
(PS_Macintosh_Name_Func): Renamed to...
(PS_Macintosh_NameFunc): This.
Update all callers.
(PS_Adobe_Std_Strings_Func): Renamed to...
(PS_Adobe_Std_StringsFunc): This.
Update all callers.
(PS_UnicodesRec): This is the former `PS_Unicodes' structure.
Add `cmap' member.
Update all callers.
(PS_Unicodes): This is now a typedef'd pointer to PS_UnicodesRec.
Update all callers.
(PS_Glyph_NameFunc): New typedef.
(PS_Unicodes_InitFunc): Change arguments to expect a function
and generic data pointer which returns a glyph name from a given
index.
* src/psnames/psmodule.c (ps_unicodes_init, ps_unicodes_char_index,
ps_unicodes_char_next, pscmaps_interface): Updated.
* include/freetype/internal/t1types.h (T1_FaceRec): Updated.
* src/psaux/t1cmap.h (T1_CmapStdRec): Updated.
(T1_CmapUnicode, T1_CmapUnicodeRec): Removed.
* src/psaux/t1cmap.c (t1_get_glyph_name): New callback function.
(t1_cmap_unicode_init, t1_cmap_unicode_done,
t1_cmap_unicode_char_index, t1_cmap_unicode_char_next,
t1_cmap_unicode_class_rec): Updated.
* src/type42/t42types.h (T42_FaceRec): Updated.
* include/freetype/internal/services/svpscmap.h (PS_UniMap): Use
FT_UInt32 for `glyph_index'.
(PS_Unicodes_InitFunc): Use FT_String for `glyph_names'.
(PS_Unicodes_CharIndexFunc): Use FT_UInt32 for `unicode'.
(PS_Unicodes_CharNextFunc): Make second argument a pointer to
FT_UInt32.
* src/psnames/psmodule.c (VARIANT_BIT, BASE_GLYPH): New macros.
(ps_unicode_value): Set VARIANT_BIT in return value if glyph is a
variant glyph (this is, it has non-leading `.' in its name).
(compare_uni_maps): Sort base glyphs before variant glyphs.
(ps_unicodes_init): Use FT_String for `glyph_names' argument.
Reallocate only if number of used entries is much smaller.
Updated to handle variant glyphs.
(ps_unicodes_char_index, ps_unicodes_char_next): Prefer base glyphs
over variant glyphs.
Simplify code.
* src/psaux/t1cmap.c (t1_cmap_uni_pair_compare): Removed.
(t1_cmap_unicode_init, t1_cmap_unicode_char_index,
t1_cmap_unicode_char_next): Use pscmap service.
(t1_cmap_unicode_done): Updated.
* src/psaux/t1cmap.h (T1_CMapUniPair): Removed.
(T1_CMapUnicode): Use PS_Unicodes structure.
correctly to generate the API reference in 'docs/reference'
* src/tools/docmaker/tohtml.py: update to output nicer fields lists
in the API reference
* src/base/ftobjs.c (FT_Load_Glyph): FT_LOAD_TARGET_LIGHT now
forces auto-hinting
* freetype/freetype.h: updating the documentation for
FT_LOAD_TARGET_XXX and FT_Render_Mode values
include/freetype/config/ftstdlib.h,
include/freetype/internal/tttypes.h,
src/sfnt/Jamfile, src/sfnt/rules.mk, src/sfnt/sfdriver.c,
src/sfnt/ttbdf.h, src/sfnt/ttbdf.c, src/sfnt/sfobjs.c:
Added support for an embedded 'BDF ' table within SFNT-based
bitmap font files. This is used to store atoms & properties from
the original BDF fonts that were used to generate the font file.
the feature is controled by TT_CONFIG_OPTION_BDF within 'ftoption.h'
and is used to implement FT_Get_BDF_Property for these font files.
At the moment, this is still experimental, the BDF table format isn't
cast into stone yet.
David Turner