This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
* src/pcf/pcfdrivr.c (PCF_Face_Done): Protect against NULL pointers.
(PCF_Face_Init): Add calls to PCF_Face_Done in case of errors.
* src/pcf/pcfread.c (pcf_read_TOC): Protect against malformed table
data and check that tables don't overlap (using a simple
bubblesort).
(PCF_METRIC_SIZE, PCF_COMPRESSED_METRIC_SIZE, PCF_PROPERTY_SIZE):
New macros which give the size of data structures in the data
stream.
(pcf_get_properties): Use rough estimates to get array size limits.
Assign `face->nprops' and `face->properties' earlier so that a call
to PCF_Face_Done can do the clean-up in case of error.
Protect against invalid string offsets.
(pcf_get_metrics): Clean up code.
Adjust tracing message levels.
Use rough estimate to get array size limit.
(pcf_get_bitmaps): Clean up code.
Adjust tracing message levels.
Use rough estimates to get offset limits.
(pcf_get_encodings): Adjust tracing message level.
(pcf_get_accel): Clean up code.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
* src/type1/t1parse.c (T1_New_Parser), src/type42/t42parse.c
(t42_parser_init): modifying functions to check the font header before
allocating anything on the heap.
* internal/freetype/ftmemory.h: introducing the new macros FT_ARRAY_MAX
and FT_ARRAY_CHECK
* src/pcf/pcfread.c, src/pcf/pcfutil.c: minor fixes and simplifications.
try to protect the PCF driver from doing stupid things with broken fonts.
include/freetype/freetype.h (FT_Bitmap_Size): `height' is now
defined to return the baseline-to-baseline distance. This was
already the value returned by the BDF and PCF drivers.
The `width' field now gives the average width. I wasn't able to
find something better. It should be taken as informative only.
New fields `size', `x_ppem', and `y_ppem'.
* src/pcf/pcfread.c (pcf_load_font): Updated to properly fill
FT_Bitmap_Size.
Do proper rounding and conversion from 72.27 to 72 points.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Updated to properly fill
FT_Bitmap_Size.
Do proper rounding and conversion from 72.27 to 72 points.
* src/sfnt/sfobjs.c (sfnt_load_face): Updated to properly fill
FT_Bitmap_Size.
* src/winfonts/winfnt.c (FNT_Face_Init): Updated to properly fill
FT_Bitmap_Size.
Redesigning the FNT driver to return multiple faces, not multiple
strikes. At least one font (app850.fon from WinME) contains
different FNT charmaps for its subfonts. Consequently, the previous
design of having multiple bitmap strikes in a single font face fails
since we have only one charmap per face.
* include/freetype/internal/fnttypes.h (FNT_Size_Rec): Removed.
(FNT_FaceRec): Remove `num_fonts' field and replace `fonts' with
`font'.
* src/base/ftwinfnt.c (FT_Get_WinFNT_Header): Updated.
* src/winfonts/winfnt.c (fnt_font_load): Don't set pixel_width equal
to pixel_height.
(fnt_face_done_fonts): Removed.
(fnt_face_get_dll_fonts): Renamed to...
(fnt_face_get_dll_font): This. Add second function argument to
select face index.
Updated to load just one subfont.
(fnt_font_done, FNT_Face_Done): Updated.
(FNT_Face_Init): Handle `face_index'.
Updated.
(FNT_Size_Set_Pixels): Simplified; similar to BDF and PCF, the
bitmap width is now ignored.
(FNT_Load_Glyph): Updated.
Fix glyph index computation.
(winfnt_driver_class): Updated.
computation of glyph_index.
(FNT_Size_Set_Pixels): To find a strike, first check pixel_height
only, then try to find a better hit by comparing pixel_width also.
Without this fix it isn't possible to access all strikes.
Also compute metrics.max_advance to be in sync with other bitmap
drivers.
* src/base/ftobjs.c (FT_Set_Char_Size): Remove redundant code.
(FT_Set_Pixel_Size): Assign value to `metrics' after validation of
arguments.
Synchronize computation of height and width for bitmap strikes. The
`width' field in the FT_Bitmap_Size structure is now only useful to
enumerate different strikes. The `max_advance' field of the
FT_Size_Metrics structure should be used to get the (maximum) width
of a strike.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Don't use AVERAGE_WIDTH for
computing `available_sizes->width' but make it always equal to
`available_sizes->height'.
* src/pcf/pcfread.c (pcf_load_font): Don't use RESOLUTION_X for
computing `available_sizes->width' but make it always equal to
`available_sizes->height'.
* src/truetype/ttdriver.c (Set_Pixel_Sizes): Pass only single
argument to function.
* src/psnames/psmodule.c (ps_unicode_value): Handle `.' after
`uniXXXX' and `uXXXX[X[X]]'.
* src/bdf/bdfdrivr.c: s/FT_Err_/BDF_Err/.
* src/cache/ftccache.c, src/cache/ftcsbits.c, src/cache/ftlru.c:
s/FT_Err_/FTC_Err_/.
* src/cff/cffcmap.c: s/FT_Err_/CFF_Err_/.
* src/pcf/pcfdrivr.c: s/FT_Err_/PCF_Err_/.
* src/psaux/t1cmap.c: Include psauxerr.h.
s/FT_Err_/PSaux_Err_/.
* src/pshinter/pshnterr.h: New file.
* src/pshinter/rules.mk: Updated.
* src/pshinter/pshalgo.c, src/pshinter/pshrec.c: Include pshnterr.h.
s/FT_Err_/PSH_Err_/.
* src/pfr/pfrdrivr.c, src/pfr/pfrobjs.c, src/pfr/pfrsbit.c:
s/FT_Err_/PFR_Err_/.
* src/sfnt/sfdriver.c, src/sfnt/sfobjs.c, src/sfnt/ttcmap0.c,
src/sfnt/ttload.c: s/FT_Err_/SFNT_Err_/.
* src/truetype/ttgload.c: s/FT_Err_/TT_Err_/.
* src/gzip/ftgzip.c: Load FT_MODULE_ERRORS_H and define
FT_ERR_PREFIX and FT_ERR_BASE.
s/FT_Err_/Gzip_Err_/.
argument.
(bdf_get_font_property): Use `const' for third argument.
Updated all callers.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Set pixel width and height
similar to the PCF driver.
* src/bdf/bdf.h (_hashnode): Use `const' for `key'.
Updated.
* src/gzip/ftgzip.c: C++ doesn't like that the array `inflate_mask'
is declared twice. It is perhaps better to modify the zlip source
files directly instead of this hack.
(zcalloc, zfree, ft_gzip_stream_close, ft_gzip_stream_io): Add casts
to make build with g++ successful.
src/base/ftbdf.c, src/bdf/bdfdrivr.c, src/pcf/pcfdrivr.c,
src/pcf/pcfread.h:
adding a new API, named FT_Get_BDF_Property to retrieve the BDF
properties of a given PCF or BDF font
* src/bdf/bdfdrivr.c (bdf_cmap_init): Don't decrease
cmap->num_encodings.
(bdf_cmap_char_index, bdf_cmap_char_next, BDF_Get_Char_Index):
Increase result by 1 for normal cases.
(BDF_Glyph_Load): Decrease index by 1.
* src/pcf/pcfdriver.c (pcf_cmap_char_index, pcf_cmap_char_next,
PCF_Char_Get_Index): Increase result by 1 for normal cases.
(PCF_Glyph_Load): Decrease index by 1.
* src/pcf/pcfread.c (pcf_get_encodings): Don't decrease j for
allocating `encoding'.
* src/base/ftobjs.c (FT_Load_Glyph, FT_Get_Glyph_Name): Fix
bounding tests.
warn about the GNU Make requirement at compile time..
* include/freetype/config/ftstdlib.h,
include/freetype/config/ftconfig.h,
include/freetype/config/ftheader.h,
include/freetype/internal/ftmemory.h,
include/freetype/internal/ftobjs.h,
src/autohint/ahoptim.c,
src/base/ftdbgmem.c, src/base/ftdebug.c,
src/base/ftmac.c, src/base/ftobjs.c,
src/base/ftsystem.c,
src/cache/ftcimage.c, src/cache/ftcsbits.c,
src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c,
src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c,
src/pcf/pcfdriver.c, src/pcf/pcfread.c,
src/psaux/t1cmap.c, src/psaux/t1decode.c,
src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c,
src/pshinter/pshrec.c,
src/psnames/psmodule.c,
src/raster/ftraster.c,
src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c,
src/smooth/ftgrays.c,
src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c,
src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c:
added the new configuration file "ftstdlib.h" used to define
aliases for all ISO C library functions used by the engine
(e.g. strlen, qsort, setjmp, etc...)
this eases the porting of FreeType 2 to exotic environments like
XFree86 modules/extensions..
also removed many #include <string.h>, #include <stdlib.h>, etc...
from the engine's sources where they're not needed..
Werner Lemberg