start_point, check_points, add_point, add_point1, close_contour
macros.
Remove add_contour macro.
Return error code from t1_builder_start_point and
t1_builder_check_points when there was one (instead of returning 0).
Previously we discovered fonts which used `setcurrentpoint' to set
the initial point of a contour to 0,0. This caused FreeType to
raise an error, because the `setcurrentpoint' operator is only
supposed to be used with the results from an OtherSubr subroutine.
This was fixed by simply ignoring the error and carrying on.
Now we have found a font which uses setcurrentpoint to actually
establish a non-zero point for a contour during the course of a
glyph program. FWIW, these files may be produced by an application
called `Intaglio' on the Mac, when converting TrueType fonts to
Type 1.
The fix allows the new invalid behaviour, the old invalid behaviour
and real proper usage of the operator to work the same way as Adobe
interpreters apparently do.
(t1_decoder_parse_charstrings): Make `setcurrentpoint' use the top
two elements of the stack to establish unconditionally the current x
and y coordinates.
Make the `flex' subroutine handling (OtherSubr 0) put the current
x,y coordinates onto the stack, instead of two dummy uninitialised
values.
Issue #28226 involved a work-around for a font which used the
`setcurrentpoint' operator in an invalid way; this operator is only
supposed to be used with the result of OtherSubrs, and the font used
it directly. The supplied patch removed the block of code which
checked this usage entirely.
This turns out to be a Bad Thing. If `setcurrentpoint' is being
used correctly it should reset the flex flag in the decoder. If we
don't do this then the flag never gets reset and we omit any further
contours from the glyph (at least until we close the path or
similar).
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
<op_setcurrentpoint>: Handle `flex_state' correctly.
This fixes Savannah bug #28226.
At least two wild PostScript files of unknown provenance contain
Type 1 fonts, apparently converted from TrueType fonts in earlier
PDF versions of the files, which use the `setcurrentpoint' operator
inappropriately.
FreeType currently throws an error in this case, but Ghostscript and
Adobe Distiller both accept the fonts and ignore the problem. This
commit #ifdefs out the check so PostScript interpreters using
FreeType can render these files.
The specification says `setcurrentpoint' should only be used to set
the point after a `Subr' call, but these fonts use it to set the
initial point to (0,0). Unnecessarily so, as they correctly use an
`hsbw' operation which implicitly sets the initial point.
* include/freetype/internal/t1types.h (T1_EncodingRecRec_): Update
comment to reflect revised code_last meaning.
* src/type1/t1load.c (T1_Open_Face), src/type42/t42objs.c
(T42_Open_Face): Assign max_char as highest character code + 1 and
use this for T1_EncodingRecRec_::code_last.
* src/psaux/t1cmap.c (t1_cmap_custom_init): Follow revised
T1_EncodingRecRec_::code_last meaning.
This fixes Savannah bug #26867.
Previously, only integers have been used which can lead to serious
rounding errors.
However, fractional values are only used internally; after the
charstrings (of either Type 1 or 2) have been processed, the
resulting coordinates get rounded to integers currently -- before
applying scaling. This should be fixed; at the same time a new load
flag should be introduced, to be used in combination with
FT_LOAD_NO_SCALE, which indicates that font units are returned in
16.16 format. Similarly, the incremental interface should be
extended to allow fractional values for metrics.
* include/freetype/internal/psaux.h (T1_BuilderRec): Remove `shift'
field.
* include/freetype/internal/pshints.h (T1_Hints_SetStemFunc,
T1_Hints_SetStem3Func): Use FT_Fixed for coordinates.
* src/psaux/psobjs.c: Include FT_INTERNAL_CALC_H.
(t1_build_add_point): Always convert fixed to integer.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Use 16.16 format everywhere (except for large integers followed by a
`div').
[CAN_HANDLE_NON_INTEGRAL_T1_OPERANDS]: Remove #ifdef and activate
code uncoditionally.
Add support for random numbers and update remaining code
accordingly; this should work now.
(t1_operator_seac): Updated.
* src/psaux/pshrec.c: Include FT_INTERNAL_CALC_H.
(ps_hints_t1stem3, t1_hints_stem): Updated.
* src/cid/cidgload.c: Include FT_INTERNAL_CALC_H.
(cid_load_glyph) [FT_CONFIG_OPTION_INCREMENTAL],
(cid_face_compute_max_advance, cid_slot_load_glyph): Updated.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String)
[FT_CONFIG_OPTION_INCREMENTAL], (T1_Get_Advances, T1_Load_Glyph):
Updated.
* src/type1/t1load.c: Include FT_INTERNAL_CALC_H.
* src/type1/t1objs.c (T1_Face_Init): Updated.
SEAC (Single Encoding Accented Characters) are composed of (basically) two
indices specifying two other glyphs, and a movement to position the accent
properly with respect to the main glyph.
To make it work with the incremental interface we now demand that the caller
handles the encoding by itself.
* src/psaux/psobjs.c (ps_parser_load_field_table): Don't handle
`count_offset' if it is zero (i.e., unused). Otherwise, the first
element of the structure which holds the data is erroneously
modified. Problem reported by Chi Nguyen <chint@necsv.com>.
extern const FT_Module_Class
(or similar for C++). However, the actual types of the variables
being declared are often different, e.g., FT_Driver_ClassRec or
FT_Renderer_Class. (Some are, indeed, FT_Module_Class.)
This works with most C compilers (since those structs begin with an
FT_Module_Class struct), but technically it's undefined behavior.
To quote the ISO/IEC 9899:TC2 final committee draft, section 6.2.7
paragraph 2:
All declarations that refer to the same object or function shall
have compatible type; otherwise, the behavior is undefined.
(And they are not compatible types.)
Most C compilers don't reject (or even detect!) code which has this
issue, but the GCC LTO development branch compiler does. (It
outputs the types of the objects while generating .o files, along
with a bunch of other information, then compares them when doing the
final link-time code generation pass.)
Patch from Savannah bug #25133.
* src/base/ftinit.c (FT_USE_MODULE): Include variable type.
* builds/amiga/include/freetype/config/ftmodule.h,
include/freetype/config/ftmodule.h, */module.mk: Updated to declare
pass correct types to FT_USE_MODULE.
fonts (like HELVI.PFB version 003.001, used on OS/2) which define
some `subrs' elements more than once. Problem reported by Peter
Weilbacher <mozilla@weilbacher.org>.
and `scale_y' as obsolete since they aren't used.
* src/psaux/psobjs.c (t1_builder_init): Updated.
* src/cff/cffgload.h (CFF_Builder): Mark `scale_x' and `scale_y' as
obsolete since they aren't used.
* src/cff/cffgload.c (cff_builder_init): Updated.
logic.
(ps_parser_load_field) <T1_FIELD_TYPE_BBOX>: Skip delimiters
correctly.
(ps_parser_load_field_table): Use `fields->array_max' instead of
T1_MAX_TABLE_ELEMENTS to limit the number of arguments.
Fonts without a cmap must be handled correctly by FreeType (anything
else would be a bug).
* src/psaux/t1decode.c (t1_decoder_parse_charstrings)
[FT_DEBUG_LEVEL_TRACE]: Improve tracing message.
Werner Lemberg