This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
The main problems
-----------------
o If FT_STROKER_LINEJOIN_BEVEL was specified, unlimited miter
joins (not bevel joins) were generated. Indeed, the meanings of
`miter' and `bevel' were incorrectly reversed (consistently) in
both the code and comments.
o The way bevel joins were constructed (whether specified
explicitly, or created as a result of exceeding the miter limit)
did not match what is required for stroked text in PostScript or
PDF.
The main fixes
--------------
o The behaviour of FT_STROKER_LINEJOIN_BEVEL has been corrected.
o A new line join style, FT_STROKER_LINEJOIN_MITER_FIXED, has been
introduced to support PostScript and PDF miter joins.
o FT_STROKER_LINEJOIN_MITER_VARIABLE has been introduced as an
alias for FT_STROKER_LINEJOIN_MITER.
Additionally, a variety of stroking errors have been fixed. These
would cause various artifacts (including points `at infinity'),
especially when stroking poor quality fonts.
See
http://lists.gnu.org/archive/html/freetype-devel/2011-07/msg00001.html
for example documents. The FreeType stroker now produces results
very similar to that produced by GhostScript and Distiller for these
fonts.
Other problems
--------------
The following problems have been resolved:
o Inside corners could be generated incorrectly. Intersecting the
inside corner could cause a missing triangular area and other
effects.
The intersection point can only be used if the join is between
two lines and both lines are long enough. The `optimization'
condition in `ft_stroker_inside' has been corrected; this
requires the line length to be passed into various functions and
stored in `FT_StrokerRec'.
o Incorrect cubic curves could be generated. The angle
calculations in `FT_Stroker_CubicTo' have been corrected to
handle the case of the curve crossing the +/-PI direction.
o If the border radius was greater than the radius of curvature of
a curve, then the negative sector would end up outside (not
inside) the border. This situation is now recognized and the
negative sector is circumnavigated in the opposite direction.
(If round line joins are being used, this code is disabled
because the line join will always cover the negative sector.)
o When a curve is split, the arcs may not join smoothly (especially
if the curve turns sharply back on itself). Changes in
direction between adjacent arcs were not handled. A round
corner is now added if the deviation from one arc to the next is
greater than a suitable threshold.
o The current direction wasn't retained if a the outline contained
a zero length lineto or a curve that was determined to be
`basically a point'. This could cause a spurious join to be
added.
o Cubics with close control points could be mishandled. All eight
cases are now distinguished correctly.
Other improvements
------------------
o Borders for cubic curves could be too `flat'.
FT_SMALL_CUBIC_THRESHOLD has been reduced a little to prevent
this.
o The handling and use of movable points has been simplified a
little.
o Various values are now computed only if the results are actually
needed.
o The directions of the outer and inner borders have been swapped,
as recommended by Graham Asher.
* src/base/ftstroke.c: Revised.
* include/freetype/ftstroke.h: Updated.
Passing uninitialized pointer to the buffer allocator is
not problematic theoretically (as far as the returned
pointer is checked before writing), but g++4.6 dislikes
it and warns by -Wuninitialized. Initialize them by NULL.
* src/base/ftobjs.c (FT_Stream_New): Init `stream'.
(new_memory_stream): Ditto.
(FT_New_GlyphSlot): Init `slot'.
(FT_CMap_New): Init `cmap'.
(open_face_PS_from_sfnt_stream): Init `sfnt_ps'.
(Mac_Read_POST_Resource): Init `pfb_data'.
(Mac_Read_sfnt_Resource): Init `sfnt_data'.
* src/base/ftrfork.c (FT_Raccess_Get_DataOffsets):
Init `offsets_internal' and `ref'.
(raccess_guess_darwin_hfsplus): Init `newpath'.
(raccess_guess_darwin_newvfs): Ditto.
* src/base/ftbitmap.c (ft_bitmap_assure_buffer):
Init `buffer'.
* src/base/ftstroke.c (FT_Stroker_New): Init `stroker'.
* include/freetype/config/ftoption.h add FT_CONFIG_OPTION_PIC
* include/freetype/internal/ftobjs.h Add pic_container member to
FT_LibraryRec.
Add macros to declare and init instances of FT_CMap_ClassRec.
Add macros to init instances of FT_Outline_Funcs and FT_Raster_Funcs.
Add macros to declare, allocate and initialize modules
(FT_Module_Class).
Add macros to declare, allocate and initialize renderers
(FT_Renderer_Class).
Add macro to init instances of FT_Glyph_Class.
Add macros to declare, allocate and initialize drivers
(FT_Driver_ClassRec).
* include/freetype/internal/ftpic.h new file to declare the
FT_PIC_Container struct and the functions to allocate and detroy it.
* include/freetype/internal/ftserv.h add macros to allocate and
destory arrays of FT_ServiceDescRec.
* include/freetype/internal/internal.h define macro to include
ftpic.h.
New Files:
* src/base/ftpic.c implement functions to allocate and destory the
global pic_container.
* src/base/basepic.h declare struct to hold PIC globals for base and
macros to access them.
* src/base/basepic.c implement functions to allocate, destroy and
initialize PIC globals for base.
* src/base/ftinit.c when FT_CONFIG_OPTION_PIC is defined implement
functions that allocate and destroy ft_default_modules according to
FT_CONFIG_MODULES_H in the pic_container instead of the global scope
and use macro from basepic.h to access it.
* src/base/ftobjs.c add calls to the functions that allocate and
destroy the global pic_container when the library is created and
destroyed.
* src/base/jamfile add new files to FT2_MULTI build:
ftpic.c and basepic.c.
* src/base/ftbase.c add new files to build:
ftpic.c and basepic.c.
* src/base/ftglyph.c when FT_CONFIG_OPTION_PIC is defined
ft_bitmap_glyph_class and ft_outline_glyph_class will be allocated
in the pic_container instead of the global scope and use macros from
basepic.h to access them.
* src/base/ftbbox.c allocate bbox_interface stract on the stack
instead of the global scope when FT_CONFIG_OPTION_PIC is defined.
* src/base/ftstroke.c access ft_outline_glyph_class allocated in
ftglyph.c via macros from basepic.h
Blaskey).
* src/sfnt/ttcmap.h (TT_CMap): Add member `unsorted'.
* src/sfnt/ttcmac.c: Use SFNT_Err_Ok where appropriate.
(tt_cmap0_validate, tt_cmap2_validate, tt_cmap6_validate,
tt_cmap8_validate, tt_cmap10_validate, tt_cmap12_validate): Use
`FT_Error' as return type.
(tt_cmap4_validate): Use `FT_Error' as return type.
Return error code for unsorted cmap.
(tt_cmap4_char_index, tt_cmap4_char_next): Use old code for unsorted
cmaps.
(tt_face_build_cmaps): Set `unsorted' variable in cmap.
Minor formatting.
correctly generate stroked paths from closed paths, i.e. nearly
all glyphs in vectorial fonts :-)
The code is still _very_ buggy though, treat with special care.
FTC_FaceID.
* src/cff/cffdrivr.c (cff_get_cmap_info): Call sfnt module's TT CMap
Info service function if the cmap comes from sfnt. Return 0 if the
cmap is sythesized in cff module.
Formatting; updating copyright.
src/autohint/ahhint.c, src/base/ftgloadr.c,
src/base/ftglyph.c, src/base/ftoutln.c,
src/base/ftstroke.c, src/cff/cffload.c, src/truetype/ttgload.c,
src/truetype/ttinterp.c:
introducing the new FT_ARRAY_COPY and FT_ARRAY_MOVE macros
to make copying arrays easier
FT_INTERNAL_OBJECTS_H.
* src/base/ftstroke.c (FT_Outline_GetInsideBorder,
FT_Outline_GetOutsideBorder): s/or/o/ to make it compile with
C++ compilers.
* src/cache/ftcmru.c, include/freetype/cache/ftcmru.h:
s/select/selection/ to avoid compiler warning.
* src/cff/cffload.h: s/select/ftselect/ to avoid potential
compiler warning.
Formatting.
Werner Lemberg