[TT_CONFIG_OPTION_BYTECODE_INTERPRETER]: Call
FT_GlyphLoader_CheckPoints before adding phantom points. This fixes
a segfault bug with fonts (e.g. htst3.ttf) which have nested
subglyphs more than one level deep. Reported by Anthony Fok.
* include/freetype/config/ftoption.h: Define
TT_CONFIG_OPTION_BYTECODE_INTERPRETER,
TT_CONFIG_OPTION_COMPILE_UNPATENTED_HINTING, and
TT_CONFIG_OPTION_FORCE_UNPATENTED_HINTING to make it the new
default.
* include/freetype/config/ftoption.h [FT_CONFIG_OPTION_MAC_FONTS]:
New macro.
* src/base/ftobjs.c: Use it to control mac font support on non-mac
platforms.
Implement partial support of Mac fonts on non-Mac platforms.
* src/base/ftobjs.c (memory_stream_close, new_memory_stream,
open_face_from_buffer, Mac_Read_POST_Resource,
Mac_Read_sfnt_Resource, IsMacResource, IsMacBinary, load_mac_face)
[!FT_MACINTOSH]: New functions.
(FT_Open_Face) [!FT_MACINTOSH]: Use load_mac_face.
* src/base/ftobjs.c (FT_Load_Glyph): Scale linear advance width only
if FT_FACE_FLAG_SCALABLE is set (otherwise we have a division by
zero since FNT and friends don't define `face->units_per_EM').
* include/freetype/config/ftoption.h, src/autohint/ahglobal.h,
src/autohint/ahglobal.c, src/autohint/ahglyph.c,
src/autohint/ahtypes.h:
included David Chester's patches to the auto-hinter in order to
slightly improve the output. Note that everything is controlled
through the new FT_CONFIG_OPTION_CHESTER_HINTS defined at the
end of "ftoption.h", there are also individual FT_CONFIG_CHESTER_XXX
macros to control individual "features".
Note that all improvements are enabled by default, but can be
tweaked for optimization and testing purpose. The configuration
macros will most likely disappear in the short future.
2003-01-11 David Turner <david@freetype.org>
* include/freetype/internal/fnttypes.h: fixed a structure field
definition to avoid memory overwrites
* include/freetype/config/ftoption.h, src/gzip/ftgzip.c: added
support for the FT_CONFIG_OPTION_SYSTEM_ZLIB option, used to specify
the use of system-wide zlib.
Note that this macro, as well as FT_CONFIG_OPTION_BYTECODE_INTERPRETER,
is not #undef-ed anymore. This allows the build system to define them
depending on the configuration (typically by adding -D flags at
compile time).
* src/sfnt/ttcmap0.c (tt_face_build_cmaps): removed compiler warnings
in optimized mode relative to the "volatile" local variables. This was
not a compiler bug after all, but the fact that a pointer to a volatile
variable is not the same than a volatile pointer to a variable :-)
the fix was to change "volatile FT_Byte* p"
into "FT_Byte* volatile p"
* src/pfr/pfrload.c, src/pfr/pfrdrivr.c, src/gzip/inftrees.c: removed
compiler warnings in optimized modes
* src/gzip/*.[hc]: modified our ZLib copy in order to prevent exporting
any zlib function names outside of the component. This prevents linking
problems on some platforms, when applications want to link FreeType
_and_ ZLib together.
2002-11-05 Juliusz <jch@pps.jussieu.fr>
* src/psaux/psobjs.c (ps_table_add): modified increment loop in
order to implement exponential behaviour
parameter sign-ness in callback function
* include/freetype/config/ftmodule.h,
include/freetype/internal/fttrace.h,
src/Jamfile, src/pfr/*:
adding a PFR font driver to the FreeType sources. Not that it
doesn't support embedded bitmaps or kerning tables for now..
* include/freetype/internal/ftmemory.h: adding the FT_MEM_ZERO
and FT_ZERO macros
* include/freetype/internal/ftstream.h: adding the FT_NEXT_OFF3,
FT_NEXT_UOFF3, FT_NEXT_OFF3_LE and FT_NEXT_UOFF3_LE to parse
in-memory 24-bit integers.
FT_LOCAL and FT_LOCAL_DEF, respectively, as with other ftconfig.h
files.
* builds/unix/ftconfig.in: Add argument to FT_LOCAL and
FT_LOCAL_DEF.
* src/truetype/ttinterp.c: s/FT_Assert/FT_ASSERT/.
* builds/unix/configure.ac: Temporarily deactivate creation of
../../Jamfile.
* builds/unix/configure: Updated.
the debug sub-system initialization. trace levels can now be specified
within the "FT2_DEBUG" environment variable. See the comments within
"ftdebug.c" for more details
* include/freetype/internal/fttrace.h: new file to define the trace
levels used for debugging. it is used both to define enums and
toggle names for FT2_DEBUG
* src/base/ftobjs.c, src/base/ftstream.c: FT_Assert renamed to
FT_ASSERT
* include/freetype/internal/ftextend.h, src/base/ftextend.c,
src/base/Jamfile, src/base/rules.mk: removing "ftextend" from the
library, since it is now completely obsolete..
constant with a fixed-float equivalent. For some reason, some compilers
aren't capable of directly computing a floating pointer constant casted
to FT_Fixed, and will link a math library instead !!
some of the exported functions should only be used by applications
that need to implement custom cache types
* src/truetype/ttgload.c: fixed a nasty bug that prevent composites
from loading correctly. Believe it or not, this was due to an invalid
macro definition !!
use the new trigonometric functions provided in "fttrigon.h". This
gets rid of some old 64-bit computation routines, as well as many
warnings when compiling the library with the "long long" 64-bit
integer type.
details.
* include/freetype/internal/cfferrs.h,
include/freetype/internal/tterrors.h,
include/freetype/internal/t1errors.h: Removed. Replaced with files
local to the module. All extra error codes have been moved to
`fterrors.h'.
* src/sfnt/ttpost.h: Move error codes to `fterrors.h'.
* src/autohint/aherrors.h, src/cache/ftcerror.h, src/cff/cfferrs.h,
src/cid/ciderrs.h, src/pcf/pcferror.h, src/psaux/psauxerr.h,
src/psnames/psnamerr.h, src/raster/rasterrs.h, src/sfnt/sferrors.h,
src/smooth/ftsmerrs.h, src/truetype/tterrors.h,
src/type1/t1errors.h, src/winfonts/fnterrs.h: New files defining the
error names for the module it belongs to.
* include/freetype/ftmoderr.h: New file, defining the module error
offsets. Its structure is similar to `fterrors.h'.
* include/freetype/fterrors.h (FT_NOERRORDEF): New macro.
(FT_ERRORDEF): Redefined to use module error offsets.
All internal error codes are now public; unused error codes have
been removed, some are new.
* include/freetype/config/ftheader.h (FT_MODULE_ERRORS_H): New
macro.
* include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_MODULE_ERRORS): New macro.
All other source files have been updated to use the new error codes;
some already existing (internal) error codes local to a module have
been renamed to give them the same name as in the base module.
All make files have been updated to include the local error files.
* src/cid/cidtokens.h: Replaced with...
* src/cid/cidtoken.h: This file for 8+3 consistency.
* src/raster/ftraster.c: Use macros for header file names.
* docs/docmaker.py: updated the DocMaker script in order to add
command line options (--output,--prefix,--title), fix the erroneous
line numbers reported during errors and warnings, and other formatting
issues..
* src/base/ftcalc.c: various tiny fixes related to rounding in 64-bits
routines and pseudo"optimisations" :-)
fixed-point square root. it is now used even with 64-bits
ints, as it's simply _much_ faster than calling FT_Sqrt64 :-)
* src/base/ftbbox.c : removed invalid "#include FT_BEZIER_H" line
types on platforms where Autoconf is not available). Also removed
FTCALC_USE_LONG_LONG and replaced it with FT_CONFIG_OPTION_FORCE_INT64
* builds/win32/freetype.dsp: updated the Visual C++ project file. Doesn't
create a DLL yet..
* cffgload.c: removed a compilation warning
* include/freetype/config/ftheader.h: removed obsolete macros like
FT_SOURCE_FILE, etc.. and added cache-specific macro definitions that
were previously defined in <freetype/ftcache.h>. Added comments to be
included in a new API Reference section.
* src/*/*: removed the use of FT_SOURCE_FILE, etc.. now, each component
needs to added its own directory to the include path at compile time.
Modified all "rules.mk" and "descrip.mms" accordingly..
`__' (those which haven't converted yet). Fixed minor conversion
issues.
* src/winfonts/winfnt.c: Updated to new header inclusion scheme.
* */*.[ch]: Changed source files to adhere to the new
* src/cff/cff.c, src/cff/rules.mk: Updated.
* */*.[ch]: Now using <ft2build.h> as the default build and setup
as the build directory. This is used to specify a specific
"ftoption.h" that toggles all traces and logging on.
Hence, the default build doesn't need the traces
- disabled the TrueType interpreter by default
- disabled the "type1" driver, "type1z" is now used
by default (the internal driver name is "type1" now !!)
to access individual glyph names. Changed some
drivers to support it through a new interface named
"glyph_name".
- introduced FT_Get_Sfnt_Name (see ftnames.h)
to access the SFNT name table in a TrueType/OpenType
file..
Moving some internal structures and constants from freetype.h to ftobjs.h.
Finally removing FT_LOAD_ANTI_ALIAS.
Cleaning up all error codes. Only the used ones have survived :-)
Removed unused FT_MAX_GLYPH_FORMATS constant.
T2 error codes are now in the range 0x500-0x5FF (instead of `TrueDoc').
Some minor improvements of error return values.
Finally fixing error code values in ftraster and ftgrays to be compliant
with all other FT error codes.
A lot of internal modifications have been performed lately on the
source in order to provide the following enhancements:
- more generic module support:
The FT_Module type is now defined to represent a handle to a given
module. The file <freetype/ftmodule.h> contains the FT_Module_Class
definition, as well as the module-loading public API
The FT_Driver type is still defined, and still represents a pointer
to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module,
FT_Get_Driver by FT_Get_Module, etc..
- support for generic glyph image types:
The FT_Renderer type is a pointer to a module used to perform various
operations on glyph image.
Each renderer is capable of handling images in a single format
(e.g. ft_glyph_format_outline). Its functions are used to:
- transform an glyph image
- render a glyph image into a bitmap
- return the control box (dimensions) of a given glyph image
The scan converters "ftraster.c" and "ftgrays.c" have been moved
to the new directory "src/renderer", and are used to provide two
default renderer modules.
One corresponds to the "standard" scan-converter, the other to the
"smooth" one.
The current renderer can be set through the new function
FT_Set_Renderer.
The old raster-related function FT_Set_Raster, FT_Get_Raster and
FT_Set_Raster_Mode have now disappeared, in favor of the new:
FT_Get_Renderer
FT_Set_Renderer
see the file <freetype/ftrender.h> for more details..
These changes were necessary to properly support different scalable
formats in the future, like bi-color glyphs, etc..
- glyph loader object:
A new internal object, called a 'glyph loader' has been introduced
in the base layer. It is used by all scalable format font drivers
to load glyphs and composites.
This object has been created to reduce the code size of each driver,
as each one of them basically re-implemented its functionality.
See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for
more information..
- FT_GlyphSlot had new fields:
In order to support extended features (see below), the FT_GlyphSlot
structure has a few new fields:
linearHoriAdvance: this field gives the linearly scaled (i.e.
scaled but unhinted) advance width for the glyph,
expressed as a 16.16 fixed pixel value. This
is useful to perform WYSIWYG text.
linearVertAdvance: this field gives the linearly scaled advance
height for the glyph (relevant in vertical glyph
layouts only). This is useful to perform
WYSIWYG text.
Note that the two above field replace the removed "metrics2" field
in the glyph slot.
advance: this field is a vector that gives the transformed
advance for the glyph. By default, it corresponds
to the advance width, unless FT_LOAD_VERTICAL_LAYOUT
was specified when calling FT_Load_Glyph or FT_Load_Char
bitmap_left: this field gives the distance in integer pixels from
the current pen position to the left-most pixel of
a glyph image WHEN IT IS A BITMAP. It is only valid
when the "format" field is set to
"ft_glyph_format_bitmap", for example, after calling
the new function FT_Render_Glyph.
bitmap_top: this field gives the distance in integer pixels from
the current pen position (located on the baseline) to
the top-most pixel of the glyph image WHEN IT IS A
BITMAP. Positive values correspond to upwards Y.
loader: this is a new private field for the glyph slot. Client
applications should not touch it..
- support for transforms and direct rendering in FT_Load_Glyph:
Most of the functionality found in <freetype/ftglyph.h> has been
moved to the core library. Hence, the following:
- a transform can be specified for a face through FT_Set_Transform.
this transform is applied by FT_Load_Glyph to scalable glyph images
(i.e. NOT TO BITMAPS) before the function returns, unless the
bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags..
- once a glyph image has been loaded, it can be directly converted to
a bitmap by using the new FT_Render_Glyph function. Note that this
function takes the glyph image from the glyph slot, and converts
it to a bitmap whose properties are returned in "face.glyph.bitmap",
"face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original
native image might be lost after the conversion.
- when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph
and FT_Load_Char functions will call FT_Render_Glyph automatically
when needed.
Tons of unnecessary stuff have been removed; only the essential rules
have been retained.
The source files now depend on all header files in include/freetype,
include/freetype/config, and include/freetype/internal. This is not
optimal, I know, and I'll try to improve this, but it is better than
before (namely no dependencies on `internal').
FTDEBUG_SRC has been added (similar to FTSYS_SRC) -- I don't know
exactly whether this is really useful, but it doesn't harm.
There is now more documentation in the makefiles itself.
io-frames.html: Use of <th>, <code>, and <var> for better tagging.
Reactivating of FT_DEBUG_LEVEL_xxx macros.
Added a lot of #include directives to make `multi' builds possible -- note
that currently the modules cid, t1, and t1z have clashing structures and
functions which means that you can only use one of these three modules for a
multi build.
Added some missing function declarations to (local) header files.
Renamed some T1_Open_Face() to CID_Open_Face() in the cid module -- a lot
of other functions should be renamed also...
Replaced many FT_xxx stuff with T1_xxx in t1z driver -- this isn't finished
yet...
Fixed FT_Free() to allow a NULL pointer without an assertion (this has
always been a valid assumption in FreeType, at least in FT 1.x).
A lot of other, minor fixes (mostly documentation).
limit on the number of subglyphs in a TrueType font..
changed the default number of gray levels used by the
smooth renderer to 256 (instead of 128). Of course, the
human eye can't tell a difference ;-)
compiler warnings with GCC + "-ansi -pedantic -Wall -W"
and LCC.
Also fixed the compilation of "type1z" with Win32-LCC
(its pre-processor is broken !!)
Updated the BUILD document too