The fragmented resources in Suitcase and .dfont should be reordered
when post resource for Type1 is being restored, but reordering of
sfnt resources induces the different face order. Now the ordering
is restricted to post resource only, to prevent the different order
issue (e.g. the face index in the fontconfig cache generated with
Carbon framework is incompatible with that by FreeType2 without
Carbon framework.) Found by Khaled Hosny and Hin-Tak Leung.
http://lists.gnu.org/archive/html/freetype-devel/2013-02/msg00035.htmlhttp://lists.gnu.org/archive/html/freetype-devel/2013-12/msg00027.html
* src/base/ftrfork.c (FT_Raccess_Get_DataOffsets): Add a switch
`sort_by_res_id' to control the fragmented resource ordering.
* include/internal/ftrfork.h: Daclare new switch.
* src/base/ftobjs.c (IsMacResource): Enable the soring for post
resource, and disable the sorting for sfnt resource.
Coverages are the interface to the HarfBuzz library to access
OpenType features for handling glyphs not addressable by the cmap.
Right now, compilation of HarfBuzz is only added to the development
build. A solution for standard build mode will be delayed until
HarfBuzz gets split into two libraries to avoid mutual dependencies
between FreeType and HarfBuzz.
Note that this is only a first step in handling coverages, basically
providing the framework only. Code for handling selected OpenType
features (this is, actually using the data in `afcover.h') will
follow.
* devel/ftoption.h, include/config/ftoption.h
(FT_CONFIG_OPTION_USE_HARFBUZZ): New macro.
* src/autofit/hbshim.c, src/autofit/hbshim.h, src/autofit/afcover.h:
New files.
* src/autofit/afscript.h: Add HarfBuzz script name tags.
* src/autofit/afstyles.h: Add default coverage enumeration values.
* src/autofit/aftypes.h: Update use of `SCRIPT' and `STYLE' macros.
(AF_Coverage): New enumeration (generated by `afcover.h').
(AF_StyleClassRec): New member `coverage'.
(AF_DEFINE_STYLE_CLASS): Updated.
* include/internal/fttrace.h: Add `afharfbuzz' for tracing coverage
data.
* src/autofit/afglobal.h: Update use of `SCRIPT' and `STYLE' macros.
(AF_SCRIPT_FALLBACK): Renamed to ...
(AF_STYLE_FALLBACK): ... this.
* src/autofit/afglobal.c: Include `hbshim.c'.
Update use of `SCRIPT' and `STYLE' macros.
(af_face_globals_compute_style_coverage)
[FT_CONFIG_OPTION_USE_HARFBUZZ]: Call `af_get_coverage'.
Update.
* src/autofit/afmodule.h (AF_ModuleRec):
s/fallback_script/fallback_style/.
* src/autofit/afmodule.c (af_property_set): Adapt handling of
`fallback-script' property to set a fallback style.
(af_property_get, af_autofitter_init): Updated.
* src/autofit/afpic.c: Update use of `SCRIPT' and `STYLE' macros.
* src/autofit/afranges.h: Update use of `SCRIPT' macro.
* src/autofit/autofit.c [FT_CONFIG_OPTION_USE_HARFBUZZ]: Include
`hbshim.c'.
* src/autofit/rules.mk (AUTOF_DRV_SRC): Add `hbshim.c'.
(AUTOF_DRV_H): Add `afcover.h'.
* builds/freetype.mk (INCLUDE_FLAGS) [DEVEL_DIR]: Use pkg-config for
all libraries needed by FreeType.
* include/internal/ftrfork.h (CONST_FT_RFORK_RULE_ARRAY_BEGIN): Fix
generated function name.
* src/base/basepic.c (FT_Init_Table_raccess_guess_table): Rename
to ...
(FT_Init_Table_ft_raccess_guess_table): ... this so that the
function name correctly corresponds to what the macro framework
expects.
* src/psnames/rules.mk (PSNAMES_DRV_SRC_S): Use correct file name so
that PIC functions are compiled also.
Problem reported by David Kastrup <dak@gnu.org>.
Surprisingly, a description how to do that was completely missing in
the API reference.
* include/freetype.h, include/ftchapters.h: New documentation
section `header_inclusion'.
We now follow the `official' announcement from Microsoft (on the
OpenType mailing list, which unfortunately hasn't a public archive).
* include/freetype/tttables.h (TT_OS2):
s/usLowerPointSize/usLowerOpticalPointSize/,
s/usUpperPointSize/usUpperOpticalPointSize/.
* src/sfnt/ttload.c (tt_face_load_os2): Update, and set correct
default values.
This large patch changes the header file directory layout from
`include/freetype/...' to `include/...', effectively removing one
level. Since the file `ft2build.h' is also located in `include'
(and it stays there even after installation), all FreeType header
files are now in a single directory.
Applications that use (a) `freetype-config' or FreeType's
`pkg-config' file to get the include directory for the compiler, and
(b) the documented way for header inclusion like
#include <ft2build.h>
#include FT_FREETYPE_H
...
don't need any change to the source code.
* include/freetype/*: Move up to...
* include/*: ... this directory.
* builds/amiga/include/freetype/*: Move up to...
* builds/amiga/include/*: ... this directory.
*/*: Essentially do `s@/freetype/@/@' where appropriate.
* CMakeList.txt: Simplify.
* builds/unix/freetype-config.in, builds/unix/freetype2.in: For
`--cflags', return a single directory.
* builds/unix/install.mk (install): No longer try to remove `cache'
and `internal' subdirectories; instead, remove the `freetype'
subdirectory.
Simply apply the patch from the bug report.
* builds/unix/ftconfig.in, builds/vms/ftconfig.h,
include/freetype/config/ftconfig.h: The used #pragma directives only
work with gcc versions 4.6 and higher.
See
http://typedrawers.com/discussion/470/new-microsoft-size-specific-design-selection-mechanism
for the announcement.
* include/freetype/tttables.h (TT_OS2): Add fields
`usLowerPointSize' and `usUpperPointSize'. Since FreeType returns
this structure only as a pointer through `FT_Get_Sfnt_Table', there
shouldn't be any ABI problems.
* src/sfnt/ttload.c (tt_face_load_os2): Implement it.
* docs/CHANGES: Updated.
When using `ADD' with an immediate operand, the instruction is
actually `ADD Rd, Rn, #<imm12>', that is, the maximum of the
immediate operand cannot exceed 4095. It will fail to compile with
LLVM.
However, in GCC, due to some legacy compatibility considerations,
`ADD.W' will be automatically emitted when the immediate operand is
larger than 4095.
* builds/unix/ftconfig.in, include/freetype/config/ftconfig.h
(FT_MulFix_arm) [__GNUC__]: Support clang compiler.
* src/truetype/ttinterp.c (TT_MulFix14_arm) [__GNUC__]: Ditto.
We simply synthesize a SFNT from the WOFF, create a memory stream
for the new data, and load the SFNT as usual.
Does NOT add any API to access WOFF metadata or private blocks.
* include/freetype/internal/tttypes.h (WOFF_HeaderRec,
WOFF_TableRec): New structures.
* include/freetype/tttags.h (TTAG_wOFF): New macro.
* src/base/ftobjs.c (FT_Open_Face): Set `stream' after calling
`open_face'.
* src/sfnt/sfobjs.c [FT_CONFIG_OPTION_SYSTEM_ZLIB]: Include
`FT_GZIP_H'.
(WRITE_BYTE, WRITE_USHORT, WRITE_ULONG): New temporary macros for
writing to a stream.
(sfnt_stream_close, compare_offsets, woff_open_font): New functions.
(sfnt_open_font): Handle `TTAG_wOFF'.
(sfnt_init_face): Set `stream' after calling `sfnt_open_font'.
* src/truetype/ttobjs.c (tt_face_init): Set `stream' after calling
`sfnt->init_face'.
* src/base/ftobjs.c (open_face): Use a pointer to FT_Stream as an
argument so that a changed stream survives.
Update callers.
This is modeled after zlib's `uncompress' function. We need this
for WOFF support.
* include/freetype/ftgzip.h, src/gzip/ftgzip.c (FT_Gzip_Uncompress):
New function.
* src/gzip/rules.mk: Rewrite to better reflect dependencies.
When building for ARMv7 with thumb2 instructions, the optimized
`FT_MulFix_arm' assembly routine was not being used.
The reason for this is in the `ftconfig.h' header, namely:
- The assembly routine uses the `smull' instruction which is not
available when generating Thumb-1 machine code. It is available
in Thumb-2 mode, though.
- The header was written a long time ago before Thumb-2 became
widely popular (e.g. with Android). So it simply doesn't use the
assembly routine if the `__thumb__' built-in macro is defined.
- When compiling in Thumb-2 mode, the compiler will define both
`__thumb__' and `__thumb2__'.
By checking for `(__thumb2__ || !__thumb__)', we ensure that the
assembly routine is only avoided when generating Thumb-1 code.
Given that this is performance-sensitive function, this improves
`ftbench' as follows on a Galaxy Nexus:
Before (us/op) After (us/op)
- loading Arial.ttf glyphs at 14 ppem [1]
Load 34.285 33.098
- same operation with the light auto-hinter [2]
Load 31.317 29.590
- same operation without hinting [3]
Load 6.143 5.376
- loading Arial.ttf advances at 14 ppem [4]
Load_Advances (normal) 34.216 33.016
Load_Advances (fast) 0.176 0.176
[1] ftbench -t 5 -p -s 14 -b a -f 0008 Arial.ttf
[2] ftbench -t 5 -p -s 14 -b a -r 1 -f 0028 Arial.ttf
[3] ftbench -t 5 -p -s 14 -b a -f 000a Arial.ttf
[4] ftbench -t 5 -p -s 14 -b b -f 0008 Arial.ttf
* builds/unix/ftconfig.in, include/freetype/config/ftconfig.h
(FT_MULFIX_ASSEMBLER): Fix handling for ARMv7.
If memory allocations fail at certain points while opening a font,
FreeType can either crash due to a NULL dereference or leak memory.
* include/freetype/internal/ftobjs.c (FT_Face_InternalRec,
FT_LibraryRec): Make `refcount' a signed integer. If, for example,
FT_Open_Face() fails in a memory allocation before the face's
reference count is set to 1, a subsequent `FT_Done_Library' call
would otherwise loop over `FT_Done_Face' 2^32 times before freeing
the face.
* src/base/ftobjs.c (open_face): Initialize `stream' and friends
earlier.
(FT_Open_Face) <Fail>: Behave correctly if `node' is NULL.
(FT_Destroy_Module) <Fail>: Check that `renderer_clazz' is valid.
* include/freetype/internal/ftdebug.h: Move pragmas to...
* include/freetype/internal/internal.h: ... this file since it gets
included by all source files.
* include/freetype/internal/ftserv.h: Remove pragma which has no
effect.
* include/freetype/internal/ftdebug.h: Remove pragmas.
* include/freetype/internal/ftserv.h: Use push and pop for pragmas.
* include/freetype/internal/ftvalid.h: Handle warning C4324.
* src/base/ftobjs.c: Use push and pop for pragmas.
* src/gzip/ftgzip.c: Handle warning C4244.
This controls whether the old FreeType CFF engine gets compiled into
FreeType. It is now disabled by default.
* devel/ftoption.h, include/freetype/config/ftoption.h
(CFF_CONFIG_OPTION_OLD_ENGINE): New macro.
* src/cff/cffdrivr.c (cff_property_set), src/cff/cffgload.c
(CFF_Operator, cff_argument_counts, cff_builder_add_point,
cff_operator_seac, cff_decoder_parse_charstrings, cff_slot_load),
src/cff/cffgload.h, src/cff/cffobjs.c (cff_driver_init): Use
CFF_CONFIG_OPTION_OLD_ENGINE to guard the affected code.
* docs/CHANGES: Updated.
A new load flag, FT_LOAD_COLOR, makes FreeType load color
embedded-bitmaps, following this draft specification
https://color-emoji.googlecode.com/git/specification/v1.html
which defines two new SFNT tables, `CBDT' and `CBLC' (named and
modeled after `EBDT' and `EBLC', respectively). The color bitmaps
are stored in the new FT_PIXEL_MODE_BGRA format to represent BGRA
pre-multiplied sRGB images. If PNG support is available, PNG color
images as defined in the same proposed specification are supported
also.
Note that color bitmaps are converted to grayscale if client didn't
ask for color.
* builds/unix/configure.raw: Search for libpng.
Add `--without-png' option.
* devel/ftoption.h, include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_PNG): New macro.
* include/freetype/freetype.h (FT_LOAD_COLOR): New load flag.
* include/freetype/ftimage.h (FT_Pixel_Mode): Add
`FT_PIXEL_MODE_BGRA'.
* include/freetype/tttags.h (TTAG_CBDT, TTAG_CBLC): New tags.
* src/base/ftbitmap.c (FT_Bitmap_Embolden): Updated.
(ft_gray_for_premultiplied_srgb_bgra): New function.
(FT_Bitmap_Convert): Handle FT_PIXEL_MODE_BGRA.
* src/sfnt/pngshim.c, src/sfnt/pngshim.h: New files.
* src/sfnt/sfnt.c: Include `pngshim.c'.
* src/sfnt/ttsbit.c: Include FT_BITMAP_H and `pngshim.h'
(tt_face_load_eblc): Load `CBLC'.
(tt_sbit_decoder_init): Load `CBDT'.
(tt_sbit_decoder_alloc_bitmap): Pass load flags to select between
color and grayscale bitmaps.
Set `num_grays'. This is used by `ftview' to choose the blending
algorithm.
(tt_sbit_decoder_load_byte_aligned,
tt_sbit_decoder_load_bit_aligned, tt_sbit_decoder_load_compound,
tt_sbit_decoder_load_image): Pass load flag.
s/write/pwrite/.
Don't call `tt_sbit_decoder_alloc_bitmap'.
Updated.
(tt_sbit_decoder_load_png) [FT_CONFIG_OPTION_USE_PNG]: New function.
(tt_sbit_decoder_load_bitmap): Pass load flag.
Handle new glyph formats 17, 18, and 19.
Call `tt_sbit_decoder_alloc_bitmap'.
Flatten color bitmaps if necessary.
(tt_face_load_sbit_image): Updated.
* src/sfnt/rules.mk (SFNT_DRV_SRC): Add `pngshim.c'.
* docs/CHANGES: Updated.
This makes the option TT_CONFIG_OPTION_SUBPIXEL_HINTING controllable
at runtime.
* src/truetype/ttdriver.c: Include FT_TRUETYPE_DRIVER_H.
(tt_property_set, tt_property_get): Fill templates.
* src/truetype/ttobjs.h (TT_DriverRec): Add `interpreter_version'
member.
Remove unused `extension_component' member.
* src/truetype/ttgload.c: Include FT_TRUETYPE_DRIVER_H.
(tt_get_metrics, TT_Hint_Glyph, TT_Process_Simple_Glyph,
compute_glyph_metrics, tt_loader_init): Use `interpreter_version'.
* src/truetype/ttinterp.c: Include FT_TRUETYPE_DRIVER_H.
(SUBPIXEL_HINTING): New macro to check `interpreter_version' flag.
Update all affected functions to use it.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
* src/truetype/ttobjs.c: Include FT_TRUETYPE_DRIVER_H.
(tt_driver_init): Initialize `interpreter_version'.
* src/truetype/ttsubpix.c: Include FT_TRUETYPE_DRIVER_H.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
==========================
Tag sources with `VER-2-4-12'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.12.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/vc2010/freetype.vcxproj, builds/win32/vc2010/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.11/2.4.12/, s/2411/2412/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 12.
* builds/unix/configure.raw (version_info): Set to 16:1:10.
* include/freetype/internal/ftstream.h: Simplify and fix integer
extraction macros.
(FT_INT8_, FT_BYTE_I16, FT_BYTE_I32, FT_INT8_I16, FT_INT8_I32,
FT_INT8_I32, FT_INT8_U32): Removed.
(FT_PEEK_SHORT, FT_PEEK_LONG, FT_PEEK_OFF3, FT_PEEK_SHORT_LE,
FT_PEEK_LONG_LE, FT_PEEK_OFF3_LE): Use unsigned values for
computations and convert to signed as the last step.
* src/cff/cf2fixed.h (cf2_intToFixed, cf2_fixedToInt,
cf2_fracToFixed): Avoid shifts of negative values.
(cf2_intToFrac, cf2_fixedToFrac, cf2_fixedTo26Dot6): Removed,
unused.
* src/cff/cf2intrp.c (cf2_interpT2CharString) <cf2_cmdEXTENDEDNMBR,
default>: Use unsigned values for computations and convert to signed
as the last step.
Use proper types in tracing messages.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Use unsigned
values for computation of operands and convert to signed as the last
step.
Use proper type in tracing message.
This work, written by Dave Arnold <darnold@adobe.com> and fully
integrated into FreeType by me, is a donation by Adobe in
collaboration with Google. It is vastly superior to the old CFF
engine, and it will replace it soon. Right now, it is still off by
default, and you have to explicitly select it using the new
`hinting-engine' property of the cff driver.
For convenience, (most of) the new files are committed separately.
* include/freetype/config/ftheader.h (FT_CFF_DRIVER_H): New macro.
* include/freetype/ftcffdrv.h: New file to access CFF driver
properties.
* include/freetype/fterrdef.h (FT_Err_Glyph_Too_Big): New error
code.
* include/freetype/internal/fttrace.h: Add `cf2blues', `cf2hints',
and `cf2interp'.
* src/cff/cffgload.h (CFF_SubFont): New member `current_subfont'.
* src/cff/cffobjs.h (CFF_DriverRec): New members `hinting_engine'
and `no_stem_darkening'.
* src/cff/cfftypes.h (CFF_FontRec): New member `cf2_instance'.
* src/cff/cff.c: Include new files.
* src/cff/cffdrivr.c (cff_property_set, cff_property_get): Handle
`hinting-engine' and `no-stem-darkening' properties (only the Adobe
engine listens to them).
* src/cff/cffgload.c: Include `cf2ft.h'.
(cff_decoder_prepare): Initialize `current_subfont'.
(cff_build_add_point): Handle Adobe engine which uses 16.16
coordinates.
(cff_slot_load): Handle FT_LOAD_NO_SCALE and FT_LOAD_NO_HINTING
separately.
Choose rendering engine based on `hinting_engine' property.
* src/cff/cffload.c (cff_font_done): Call finalizer of the Adobe
engine.
* src/cff/cffobjs.c: Include FT_CFF_DRIVER_H.
(cff_driver_init): Set default property values.
* src/cff/rules.mk (CFF_DRV_SRC, CFF_DRV_H): Add new files.
* src/cff/cf2*.*: New files, containing the Adobe engine.
Use `FT2_DEBUG=bitmap:3' for tracing.
* src/base/md5.c, src/base/md5.h: New files, taken from
http://openwall.info/wiki/people/solar/software/public-domain-source-code/md5
* include/freetype/internal/fttrace.h: Add `bitmap'.
* src/base/ftobjs.c [FT_DEBUG_LEVEL_TRACE]: Include `md5.c'
(FT_Render_Glyph_Internal) [FT_DEBUG_LEVEL_TRACE]: For tracing,
convert resulting bitmap to a uniform format and compute a checksum.
Use `bitmap' category for the tracing message.
* src/base/rules.mk (BASE_H): Updated.
* docs/LICENSE.TXT: Updated.
* include/freetype/internal/ftserv.h (FT_DEFINE_SERVICEDESCREC7):
New macro.
* src/cff/cffdrivr.c: Include FT_SERVICE_PROPERTIES_H.
(cff_property_set, cff_property_get): New function, still empty.
Define `cff_service_properties' service.
Update `cff_services'.
* src/cff/cffpic.h: Include FT_SERVICE_PROPERTIES_H.
(CFF_SERVICE_PROPERTIES_GET): New macro.
CffModulePIC: Add `cff_service_properties'.
The idea is to replace code like
return FT_Err_Foo_Bar;
or
return CFF_Err_Foo_Bar;
with
return FT_THROW( Foo_Bar );
The FT_THROW macro has two functions:
. It hides the module specific prefix.
. In debug mode, it calls the empty function `FT_Throw' which can
be thus used to set a breakpoint.
* include/freetype/internal/ftdebug.h (FT_THROW): New macro.
(FT_Throw): New prototype.
* src/base/ftdebug.c (FT_Throw): New function.
The idea is to always have FT_ERR_PREFIX available internally.
* include/freetype/fterrors.h: Use FT2_BUILD_LIBRARY to guard
undefinition of FT_ERR_PREFIX
* src/gxvalid/gxverror.h, src/otvalid/otverror.h,
src/sfnt/sferrors.h: Updated.
* include/freetype/fttrigon.h (FT_Hypot): Declare it.
* src/base/fttrigon.c (FT_Hypot): Define it.
* src/truetype/ttgload.c (TT_Process_Composite_Component): Use it
instead of explicit expressions.
* src/truetype/ttinterp.c (Current_Ratio, Normalize): Use it instead
of TT_VecLen.
(TT_VecLen): Removed.
After the next release we are going to remove the code completely.
* devel/ftoption.h, include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_OLD_INTERNALS): Comment out.
* docs/CHANGES: Document it.
Problem reported by Robin Watts <robin.watts@artifex.com>.
* src/base/ftoutln.c (FT_Outline_New_Internal): Ensure that
`numContours' and `numPoints' fit into FT_Outline's `n_points' and
`n_contours', respectively.
* include/freetype/internal/ftserv.h (FT_SERVICE_UNAVAILABLE): Use
`logical not' operator instead of negation. The idea is that `~'
returns exactly the data type enforced by the cast to a pointer (be
it 32bit or 64bit or whatever), while a negative integer has not
this flexibility.
* src/cache/ftccmap.c (FTC_CMAP_UNKNOWN): Ditto.
* src/truetype/ttgxvar.c (ALL_POINTS, TT_Get_MM_Var): Ditto.
* src/type/t1load.c (T1_Get_MM_Var): Ditto.
(parse_blend_axis_types): Use cast.
* src/bdf/bdflib.c (_bdf_readstream): Use cast.
* src/psaux/psconv.c: Include FT_INTERNAL_DEBUG_H.
(FT_COMPONENT): Define.
(PS_Conv_Strtol): Return FT_Long.
Handle bad data and overflow.
Emit some tracing messages in case of error.
(PS_Conv_ToInt): Return FT_Long.
(PS_Conv_ToFixed): Updated.
* src/psaux/psconv.h: Updated.
* include/freetype/internal/fttrace.h: Add `psconv'.
The auto-hinter's latin module only handles latin ligatures in the
`Alphabetical Presentation Forms' block.
* src/autofit/aflatin.c (af_latin_uniranges): Fix it.
* include/freetype/fterrdef.h (FT_Err_Missing_Property): New error
code.
* include/freetype/ftmodapi.h (FT_Property_Set, FT_Property_Get):
New API.
* include/freetype/internal/services/svprop.h: New file.
* include/freetype/internal/ftserv.h (FT_SERVICE_PROPERTIES_H): New
macro.
* src/base/ftobjs.c: Include FT_SERVICE_PROPERTIES_H.
(ft_property_do, FT_Property_Set, FT_Property_Get): New functions.
Problem reported by Peter Breitenlohner and Akira Kakuto.
* include/freetype/config/ftstdlib.h (ft_setjmp): Updated.
* src/sfnt/ttcmap.c (tt_face_build_cmaps): Remove cast.
* include/freetype/internal/ftcalc.h (FT_MulDiv_No_Round): Don't
enclose with `TT_USE_BYTECODE_INTERPRETER'; we now need the function
elsewhere also.
* src/autofit/afcjk.h: Use AF_CONFIG_OPTION_CJK.
* src/truetype/ttgload.c (tt_loader_init): Fix compiler warning.
* src/truetype/ttinterp.c (Ins_MSIRP): Fix compiler warning.
* src/truetype/ttinterp.h: Use
TT_CONFIG_OPTION_BYTECODE_INTERPRETER.
This is the large, famous `Infinality' patch to support ClearType
bytecode which has been available from
http://www.infinality.net/blog/ for some time, and which has been
refined over the last years. While still experimental, it is now
mature enough to be included directly into FreeType.
Most of the code is based on the ClearType whitepaper written by
Greg Hitchcock
http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx
which gives a detailed overview of the necessary changes to the
Microsoft rasterizer so that older fonts are supported. However, a
lot of details are still missing, and this patches provides a
framework to easily handle rendering issues down to the glyph level
of certain fonts.
Note that ClearType support is not completely implemented! In
particular, full support for the options `compatible_widths',
`symmetrical_smoothing, and `bgr' (via the GETINFO bytecode
instruction) is missing.
* src/truetype/ttsubpix.c: New file, providing code to handle
`tweaks', this is, rules for certain glyphs in certain fonts
(including wildcards) which need a special treatment.
* src/truetype/ttsubpix.h: New file, holding the tweaking rules.
* include/freetype/config/ftoption.h, src/devel/ftoption.h
(TT_CONFIG_OPTION_SUBPIXEL_HINTING): New macro.
* include/freetype/internal/ftobjs.h (FT_PIX_FLOOR_GRID,
FT_PIX_ROUND_GRID, FT_PIX_CEIL_GRID): New macros.
* src/truetype/truetype.c [TT_USE_BYTECODE_INTERPRETER]: Include
`ttsubpix.c'.
* src/truetype/ttgload.c: Include `ttsubpix.h'.
[All changes below are guarded by TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(tt_get_metrics): Set tweak flags.
(TT_Hint_Glyph): Call `FT_Outline_EmboldenXY' if necessary.
(TT_Process_Simple_Glyph): Compensate emboldening if necessary.
(compute_glyph_metrics): Handle `compatible widths' option.
(tt_loader_init): Handle ClearType GETINFO information bits.
* src/truetype/rules.mk (TT_DRC_SRC): Updated.
* src/truetype/ttinterp.c: Include `ttsubpix.h'.
[Where necessary, changes below are guarded by
TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(Direct_Move, Direct_Move_X): Extended.
(Round_None, Round_To_Grid, Round_To_Half_Grid, Round_Down_To_Grid,
Round_Up_To_Grid, Round_To_Double_Grid, Round_Super, Round_Super_45,
SetSuperRound): Add parameter to handle the number of grid lines per
pixel.
(SET_SuperRound, ROUND_None, CUR_Func_round): Updated.
(DO_SROUND, DOS45ROUND, DO_ODD, DO_EVEN): Updated.
(DO_ROUND, DO_NROUND): Updated.
(DO_RS): Take care of `Typeman' bytecode patterns.
(Ins_FDEF): Add some debugging code. Commented out.
(Ins_ENDF): Restore state.
(Ins_CALL, Ins_LOOPCALL): Handle inline delta functions.
(Ins_MD): Handle `Vacuform' rounds.
(Move_Zp2_Point, Ins_SHPIX, Ins_MSIRP, Ins_MDAP, Ins_MIAP,
Ins_MDRP, Ins_MIRP): Handle tweaks.
(Ins_ALIGNRP): Add tweak guard.
(Ins_IUP, Ins_DELTAP): Handle tweaks.
(Ins_GETINFO): Handle new ClearType bits.
(TT_RunIns): Handle tweaks.
* src/truetype/ttinterp.h: Updated.
(SPH_TweakRule, SPH_ScaleRule): New structures for tweaks.
(TT_ExecContextRec): Add members for subpixel hinting support.
* src/truetype/ttobjs.h (TT_DefRecord): Add `inline_delta' member.
==========================
Tag sources with `VER-2-4-10'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.10.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/vc2010/freetype.vcxproj, builds/win32/vc2010/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.9/2.4.10/, s/249/2410/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 10.
* builds/unix/configure.raw (version_info): Set to 15:0:9.
* include/freetype/ftoutln.h (FT_Outline_EmboldenXY): Define it.
* src/base/ftoutln.c (FT_Outline_EmboldenXY): Implement it, using a
simplified embolding algorithm.
(FT_Outline_Embolden): Make it a special case of
`FT_Outline_EmboldenXY'
* include/freetype/internal/ftobjs.h (FT_ModuleRec, FT_LibraryRec):
Remove `generic' field since users can't access it.
* src/base/ftobjs.c (FT_Done_GlyphSlot): Call `generic.finalizer' as
advertised in the documentation of FT_Generic.
(Destroy_Module, FT_Done_Library): Updated to changes in `ftobjs.h'.
Based on the patch provided by Erik Dahlstrom <ed@opera.com>,
http://lists.gnu.org/archive/html/freetype-devel/2012-01/msg00010.html
Also `raccess_guess_table[]' and `raccess_rule_by_darwin_vfs()'
are renamed with `ft_' suffixes.
* src/base/ftbase.h: `raccess_rule_by_darwin_vfs()' is renamed
to `ft_raccess_rule_by_darwin_vfs()'.
* src/base/ftobjs.c: Ditto.
* src/base/ftrfork.c: Declarations of FT_RFork_Rule,
raccess_guess_rec, are moved to...
* include/freetype/internal/ftrfork.h: Here.
* include/freetype/internal/ftrfork.h:
FT_RFORK_RULE_ARRAY_{BEGIN,ENTRY,END} macros are defined
to replace raccess_guess_table[] in both of PIC and non-PIC
modes.
* src/base/ftrfork.c: raccess_guess_table[] array is rewritten
by FT_RFORK_RULE_ARRAY_{BEGIN,ENTRY,END}.
* src/base/basepic.h (BasePIC): Add `ft_raccess_guess_table'
storage. (FT_RACCESS_GUESS_TABLE_GET): New macro to retrieve
the function pointer from `ft_raccess_guess_table' storage in
`BasePIC' structure.
* src/base/ftrfork.c (FT_Raccess_Guess): Rewritten with
FT_RACCESS_GUESS_TABLE_GET.
(raccess_get_rule_type_from_rule_index): Add `library' as the
first argument to the function, to retrieve the storage of
`ft_raccess_guess_table' from it. Also `raccess_guess_table'
is replaced by FT_RACCESS_GUESS_TABLE_GET.
(ft_raccess_rule_by_darwin_vfs): Ditto.
Originally FT_DEFINE_{DRIVER,MODULE,RENDERER}() macros were
designed to declare xxx_pic_{free,init} by themselves.
Because these macros are used at the end of the module
interface (e.g. ttdriver.c) and the wrapper source to build
a module as a single object (e.g. truetype.c) includes
the PIC file (e.g. ttpic.c) before the module interface,
these macros are expanded AFTER xxx_pic_{free,init} body
when the modules are built as single object.
The declaration after the implementation causes the redundant
declaration warnings, so the declarations are moved to module
PIC headers (e.g. ttpic.h). Separating to other header files
are needed for multi build.
* include/freetype/internal/ftdriver.h (FT_DEFINE_DRIVER):
Remove class_##_pic_free and class_##_pic_init declarations.
* include/freetype/internal/ftobjs.h (FT_DEFINE_RENDERER,
FT_DEFINE_MODULE): Ditto.
* src/base/basepic.h: Insert a comment and fix coding style.
* src/autofit/afpic.h: Declare autofit_module_class_pic_{free,
init}.
* src/cff/cffpic.h: Declare cff_driver_class_pic_{free,init}.
* src/pshinter/pshpic.h: Declare pshinter_module_class_pic_{free,
init}.
* src/psnames/pspic.h: Declare psnames_module_class_pic_{free,
init}.
* src/raster/rastpic.h: Declare
ft_raster{1,5}_renderer_class_pic_{free,init}
* src/sfnt/sfntpic.h: Declare sfnt_module_class_pic_{free,init}.
* src/smooth/ftspic.h: Declare
ft_smooth_{,lcd_,lcdv_}renderer_class_pic_{free,init}.
* src/truetype/ttpic.h: Declare tt_driver_class_pic_{free,init}.
Originally FT_MACINTOSH was a pure auto macro and DARWIN_NO_CARBON
was a configurable macro to disable Carbon-dependent code. Because
now configure script sets DARWIN_NO_CARBON by default and disables
Darwin & Carbon-dependent codes, these macros can be unified.
FT_MACINTOSH (undefined by default) is kept and DARWIN_NO_CARBON
(defined by default) is removed, because DARWIN_NO_CARBON violates
FT_XXX naming convention of public macros, and a macro configured by
default is not portable for the building without configure (e.g.
make devel).
* builds/unix/configure.raw: Define FT_MACINTOSH if Carbon-based
old Mac font support is requested and Carbon is available.
* builds/unix/ftconfig.in: Undefine FT_MACINTOSH when the support
for Mac OS X without Carbon (e.g. Mac OS X 10.4 for ppc64) is
requested.
* include/freetype/config/ftconfig.in: Ditto.
* builds/vms/ftconfig.h: Ditto.
* src/base/ftbase.h: Remove DARWIN_NO_CARBON.
* src/base/ftbase.c: Ditto.
* src/base/ftobjs.c: Ditto.
* src/base/ftrfork.c: Ditto.
* src/base/ftmac.c: Compile the body if FT_MACINTOSH is defined
(same with TT_USE_BYTECODE_INTERPRETER in ttinterp.c).
* builds/mac/ftmac.c: Ditto.
* builds/mac/FreeType.m68k_cfm.make.txt: Define FT_MACINTOSH.
* builds/mac/FreeType.m68k_far.make.txt: Ditto.
* builds/mac/FreeType.ppc_classic.make.txt: Ditto.
* builds/mac/FreeType.ppc_carbon.make.txt: Ditto.
Previously, FreeType misleadingly returned
FT_Err_Unknown_File_Format if a module was missing (or a test was
missing completely).
* include/freetype/fterrdef.h (FT_Err_Missing_Module): Define.
* src/cff/cffobjs.c (cff_face_init), src/cid/cidobjs.c
(cid_face_init), src/sfnt/sfobjs.c (sfnt_init_face),
src/truetype/ttobjs.c (tt_face_init), src/type1/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init,
T42_Driver_Init): Updated.
* src/type1/t1afm.c (T1_Read_Metrics), src/type/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init): Remove now
redundant test for `psaux'.
This allows a Type 1 font face to be interrogated to retrieve most
of the dictionary keys (keys not relevant to FreeType's Type 1
interpreter are not available).
* include/freetype/internal/services/svpsinfo.h
(PS_GetFontValueFunc): New typedef.
(PSInfo): Add `ps_get_font_value'.
(FT_DEFINE_SERVICE_PSINFOREC): Updated.
* include/freetype/internal/t1types.h (T1_EncodingType): Moved to...
* include/freetype/t1tables.h: Here.
(PS_Dict_Keys): New enumeration.
(FT_Get_PS_Font_Value): New declaration.
* src/base/fttype1.c (FT_Get_PS_Font_Value): New function.
* src/type1/t1driver.c (t1_ps_get_font_value): This new function
does the real job.
(t1_service_ps_info): Add it.
* src/cff/cffdrivr.c (cff_service_ps_info), src/cid/cidriver.c
(cid_service_ps_info), src/type42/t42drivr.c (t42_service_ps_info):
Updated.
* include/freetype/config/ftstdlib.h (FT_USHORT_MAX): New macro.
* src/base/ftbitmap.c (FT_Bitmap_Convert): Protect against invalid
value of `target->rows'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Add check for
flex start.
* src/raster/ftrend1.c (ft_raster1_render): Check `width' and
`height'.
* src/truetype/ttgxvar.c (TT_Vary_Get_Glyph_Deltas): Protect against
invalid values in `localpoints' array.
The main problems
-----------------
o If FT_STROKER_LINEJOIN_BEVEL was specified, unlimited miter
joins (not bevel joins) were generated. Indeed, the meanings of
`miter' and `bevel' were incorrectly reversed (consistently) in
both the code and comments.
o The way bevel joins were constructed (whether specified
explicitly, or created as a result of exceeding the miter limit)
did not match what is required for stroked text in PostScript or
PDF.
The main fixes
--------------
o The behaviour of FT_STROKER_LINEJOIN_BEVEL has been corrected.
o A new line join style, FT_STROKER_LINEJOIN_MITER_FIXED, has been
introduced to support PostScript and PDF miter joins.
o FT_STROKER_LINEJOIN_MITER_VARIABLE has been introduced as an
alias for FT_STROKER_LINEJOIN_MITER.
Additionally, a variety of stroking errors have been fixed. These
would cause various artifacts (including points `at infinity'),
especially when stroking poor quality fonts.
See
http://lists.gnu.org/archive/html/freetype-devel/2011-07/msg00001.html
for example documents. The FreeType stroker now produces results
very similar to that produced by GhostScript and Distiller for these
fonts.
Other problems
--------------
The following problems have been resolved:
o Inside corners could be generated incorrectly. Intersecting the
inside corner could cause a missing triangular area and other
effects.
The intersection point can only be used if the join is between
two lines and both lines are long enough. The `optimization'
condition in `ft_stroker_inside' has been corrected; this
requires the line length to be passed into various functions and
stored in `FT_StrokerRec'.
o Incorrect cubic curves could be generated. The angle
calculations in `FT_Stroker_CubicTo' have been corrected to
handle the case of the curve crossing the +/-PI direction.
o If the border radius was greater than the radius of curvature of
a curve, then the negative sector would end up outside (not
inside) the border. This situation is now recognized and the
negative sector is circumnavigated in the opposite direction.
(If round line joins are being used, this code is disabled
because the line join will always cover the negative sector.)
o When a curve is split, the arcs may not join smoothly (especially
if the curve turns sharply back on itself). Changes in
direction between adjacent arcs were not handled. A round
corner is now added if the deviation from one arc to the next is
greater than a suitable threshold.
o The current direction wasn't retained if a the outline contained
a zero length lineto or a curve that was determined to be
`basically a point'. This could cause a spurious join to be
added.
o Cubics with close control points could be mishandled. All eight
cases are now distinguished correctly.
Other improvements
------------------
o Borders for cubic curves could be too `flat'.
FT_SMALL_CUBIC_THRESHOLD has been reduced a little to prevent
this.
o The handling and use of movable points has been simplified a
little.
o Various values are now computed only if the results are actually
needed.
o The directions of the outer and inner borders have been swapped,
as recommended by Graham Asher.
* src/base/ftstroke.c: Revised.
* include/freetype/ftstroke.h: Updated.
The native SDK on earliest Mac OS X (10.0-10.1) did not have
"AvailabilityMacros.h". To prevent the inclusion of missing
header file, ECANCELED (introduced in 10.2) in POSIX header
file <errno.h> is checked to detect the system version.
* include/freetype/config/ftconfig.h: Conditionalize the
inclusion of "AvailabilityMacros.h".
* builds/unix/ftconfig.in: Ditto.
* builds/vms/ftconfig.h: Ditto.
To remove extremas of vertical strokes of CJK Ideographs at
low resolution and make the top and bottom horizontal stems
aligned, bluezones for CJK Ideographs are calculated from
sample glyphs. At present, vertical bluezones (bluezones
to align vertical stems) are disabled by default. For detail, see
http://lists.gnu.org/archive/html/freetype-devel/2011-04/msg00070.htmlhttp://lists.gnu.org/archive/html/freetype-devel/2011-04/msg00092.htmlhttp://lists.gnu.org/archive/html/freetype-devel/2011-05/msg00001.html
* include/freetype/internal/fttrace.h: New trace component `afcjk'.
* src/autofit/afcjk.h (AF_CJK{Blue,Axis,Metric}Rec): Add CJK version
for AF_Latin{Blue,Axis,Metric}Rec.
(af_cjk_metrics_check_digits): Ditto, shared with Indic module.
(af_cjk_metrics_init_widths): Ditto.
(af_cjk_metrics_init): Take AF_CJKMetric instead of AF_LatinMetric.
(af_cjk_metrics_scale): Ditto (declaration).
(af_cjk_hints_init): Ditto (declaration).
(af_cjk_hints_apply): Ditto (declaration).
* src/autofit/afcjk.c (af_cjk_metrics_scale): Ditto (body).
(af_cjk_hints_init): Ditto (body).
(af_cjk_hints_apply): Ditto (body).
(af_cjk_metrics_init_widths): Duplicate af_latin_metrics_init_widths.
(af_cjk_metrics_check_digits): Duplicate af_latin_metrics_check_digits.
(af_cjk_metrics_init): Call CJK bluezone initializer.
(af_cjk_metrics_scale_dim): Add code to scale bluezones.
(af_cjk_hints_compute_blue_edges): New function, CJK version of
af_latin_hints_compute_blue_edges.
(af_cjk_metrics_init_blues): New function, CJK version of
af_latin_metrics_init_blues.
(af_cjk_hints_edges): Add code to align the edge stems to blue zones.
* src/autofit/afindic.c (af_indic_metrics_init): Take AF_CJKMetric
instead of AF_LatinMetric, and initialize as af_cjk_metrics_init.
However bluezones are not initialized.
(af_indic_metrics_scale): Take AF_CJKMetric instead of AF_LatinMetric.
(af_indic_hints_init): Ditto.
(af_indic_hints_apply): Ditto.
* docs/CHANGES: Note about CJK bluezone support.
This makes FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH redundant,
deprecated, and ignored. The new behavior is what every major user
of FreeType has been requesting. Global advance is broken in many
CJK fonts. Just ignoring it by default makes most sense.
* src/truetype/ttdriver.c (tt_get_advances),
src/truetype/ttgload.c (TT_Get_HMetrics, TT_Get_VMetrics,
tt_get_metrics, compute_glyph_metrics, TT_Load_Glyph),
src/truetype/ttgload.h: Implement it.
* docs/CHANGES: Updated.
Previously, signed integers were converted to unsigned integers, but
this can fail because of sign extension. For example, 0xa344a1eb
becomes 0xffffffffa344a1eb.
We now do the reverse which is always correct because the integer
size is the same during the cast from unsigned to signed.
* include/freetype/internal/ftstream.h, src/base/ftstream.c
(FT_Stream_Get*): Replace with...
(FT_Stream_GetU*): Functions which read unsigned integers.
Update all macros accordingly.
* src/gzip/ftgzip.c (ft_gzip_get_uncompressed_size): Updated.
* include/freetype/config/ftconfig.h: Ported the FT_MulFix_i386
function from GNU inline assembly syntax (see #ifdef __GNUC__ block
above) to MASM syntax for Microsoft Visual C++.
* include/freetype/config/ftconfig.h (FT_MulFix_arm):
Copy the maintained code from builds/unix/ftconfig.in.
Old GNU binutils could not accept the reduced syntax
`orr %0, %2, lsl #16'. Un-omitted syntax like RVCT,
`orr %0, %0, %2, lsl #16' is better. Reported by
Johnson Y. Yan. The bug report by Qt developers is
considered too.
http://bugreports.qt.nokia.com/browse/QTBUG-6521
=========================
Tag sources with `VER-2-4-4'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.4
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.3/2.4.4/, s/243/244/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 4.
* builds/unix/configure.raw (version_info): Set to 12:2:6.
FT_POINTER_TO_ULONG(), FTC_FACE_ID_HASH() and
FTC_IMAGE_TYPE_HASH() are enclosed by
FT_CONFIG_OPTION_OLD_INTERNALS and hidden from
normal clients.
For the history of these macros, see the investigation:
http://lists.gnu.org/archive/html/freetype/2010-10/msg00022.html
=========================
Tag sources with `VER-2-4-3'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.3
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.2/2.4.3/, s/242/243/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 3.
* builds/unix/configure.raw (version_info): Set to 12:1:6.
=========================
Tag sources with `VER-2-4-2'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.2
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.1/2.4.2/, s/241/242/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 2.
* builds/unix/configure.raw (version_info): Set to 12:0:6.
=========================
Tag sources with `VER-2-4-1'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.1.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.4.0/2.4.1/, s/240/241/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 1.
* builds/unix/configure.raw (version_info): Set to 11:1:5.
=========================
Tag sources with `VER-2-4-0'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.4.0.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.3.12/2.4.0/, s/2312/240/.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 4.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.raw (version_info): Set to 11:0:5.
Too serious check of errors by `FT_CMap_New' since 2010-07-04
is fixed. Reported by Tor Andersson.
* include/freetype/fterrdef.h
(PSnames_Err_No_Unicode_Glyph_Name): New error code to
indicate the Unicode charmap synthesis failed because
no Unicode glyph name is found.
* src/psnames/psmodule.c (ps_unicodes_init): Return
PSnames_Err_No_Unicode_Glyph_Name when no Unicode glyph name
is found in the font.
* src/cff/cffcmap.c (cff_cmap_unicode_init): Return
CFF_Err_No_Unicode_Glyph_Name when no SID is available.
* src/type1/t1objs.c (T1_Face_Init): Proceed if `FT_CMap_New'
is failed by the lack of Unicode glyph name.
* src/type42/t42objs.c (T42_Face_Init): Ditto.
* src/cff/cffobjs.c (cff_face_init): Ditto.
Fix for Savannah bug #30059.
* src/cache/ftccmap.c (FTC_CMapCache_Lookup): Replace `16' the
minimum character code passed by a legacy rogue client by...
* include/freetype/config/ftoption.h (FT_MAX_CHARMAP_CACHEABLE):
This. It is undefined when FT_CONFIG_OPTION_OLD_INTERNALS is
undefined (thus the rogue client compatibility is not required).
* src/cff/cffobjs.c (cff_face_init): Abort the automatic
selection or synthesis of Unicode cmap subtable when the charmap
index exceeds FT_MAX_CHARMAP_CACHEABLE.
* src/sfnt/ttcmap.c (tt_face_build_cmaps): Issue error message
when the charmap index exceeds FT_MAX_CHARMAP_CACHEABLE.
* src/base/ftobjs.c (find_unicode_charmap): When Unicode charmap
is found after FT_MAX_CHARMAP_CACHEABLE, ignore it and search
earlier one.
(find_variant_selector_charmap): When UVS charmap is found after
FT_MAX_CHARMAP_CACHEABLE, ignore it and search earlier one.
(FT_Select_Charmap): When a charmap matching with requested
encoding but after FT_MAX_CHARMAP_CACHEABLE, ignore and search
earlier one.
(FT_Set_Charmap): When a charmap matching with requested
charmap but after FT_MAX_CHARMAP_CACHEABLE, ignore and search
earlier one.
(FT_Get_Charmap_Index): When a requested charmap is found
after FT_MAX_CHARMAP_CACHEABLE, return the inverted charmap
index.
* src/base/ftstream.c (FT_Stream_EnterFrame): Exit with error
if the frame size is larger than the stream size.
* src/base/ftsystem.c (ft_ansi_stream_io): Exit with error if
seeking a position larger than the stream size.
* include/freetype/fterrdef.h
(BDF_Err_Missing_Fontboundingbox_Field): New error code.
* src/bdf/bdflib.c (_bdf_parse_start): Check for missing
`FONTBOUNDINGBOX' field.
Avoid memory leak if there are multiple `FONT' lines (which is
invalid but doesn't hurt).
This is based on code written by Lifter
<http://unixforum.org/index.php?showuser=11691>. It fixes
FreeDesktop bug #27386.
* src/base/ftlcdfil.c (FT_Library_SetLcdFilterWeights): New
function.
* include/freetype/ftlcdfil.h: Updated.
* docs/CHANGES: Updated.
==========================
Tag sources with `VER-2-3-12'.
* docs/CHANGES: Updated.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.12.
* README, Jamfile (RefDoc),
builds/win32/vc2005/freetype.vcproj, builds/win32/vc2005/index.html,
builds/win32/vc2008/freetype.vcproj, builds/win32/vc2008/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualc/index.html, builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj,
builds/win32/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.3.11/2.3.12/, s/2311/2312/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 12.
* builds/unix/configure.raw (version_info): Set to 10:0:4.
After long discussion, we now consider the character width vector
(wx,wy) returned by the `sbw' Type 1 operator as being part of *one*
direction only. For example, if you are using the horizontal
writing direction, you get the horizontal and vertical components of
the advance width for this direction. Note that OpenType and CFF fonts
don't have such a vertical component; instead, the GPOS table can be
used to generate two-dimensional advance widths (but this isn't
handled by FreeType).
* include/freetype/ftincrem.h (FT_Incremental_MetricsRec): Add
`advance_v' field to hold the vertical component of the advance
value.
* src/truetype/ttgload.c (tt_get_metrics), src/cff/cffgload.c
(cff_slot_load), src/type1/t1gload.c
(T1_Parse_Glyph_And_Get_Char_String), src/cid/cidgload.c
(cid_load_glyph): Use it.
Ghostscript requires the incremental font interface for handling
some Postscript documents. It is moving to using FreeType as its
primary renderer; supporting this in the default build makes it
Ghostscript to be linked against the system FreeType when one is
available.
* include/freetype/config/ftoption.h (FT_CONFIG_OPTION_INCREMENTAL):
Uncomment.
==========================
Tag sources with `VER-2-3-11'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.11.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.10/2.3.11/, s/2310/2311/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 11.
* builds/unix/configure.raw (version_info): Set to 9:22:3.
==========================
Tag sources with `VER-2-3-10'.
* builds/toplevel.mk (major, minor, patch): Fix regexp to allow more
than a single digit.
(dist): We now use git.
* docs/VERSION.DLL: Update documentation and bump version number to
2.3.10.
* README, Jamfile (RefDoc), builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj,
builds/win32/visualce/index.html,
builds/win32/visualce/freetype.dsp,
builds/win32/visualce/freetype.vcproj: s/2.3.9/2.3.10/, s/239/2310/.
* include/freetype/freetype.h (FREETYPE_PATCH): Set to 10.
* builds/unix/configure.raw (version_info): Set to 9:21:3.
* include/freetype/internal/t1types.h (T1_EncodingRecRec_): Update
comment to reflect revised code_last meaning.
* src/type1/t1load.c (T1_Open_Face), src/type42/t42objs.c
(T42_Open_Face): Assign max_char as highest character code + 1 and
use this for T1_EncodingRecRec_::code_last.
* src/psaux/t1cmap.c (t1_cmap_custom_init): Follow revised
T1_EncodingRecRec_::code_last meaning.
This function was originally added to return the underlying font
format in a way which was compatible with the needs of the XFree86
font server. However, a function of this sort is also necessary when
freetype is used by PDF interpreters which apply different rules
based on the font format.
The X11 namespace is confusing for such users. This commit ameliorates
that confusion by documenting that this function is in fact entirely
internal to freetype and doesn't depend on X11 in any way.
This fixes Savannah bug #26867.
Previously, only integers have been used which can lead to serious
rounding errors.
However, fractional values are only used internally; after the
charstrings (of either Type 1 or 2) have been processed, the
resulting coordinates get rounded to integers currently -- before
applying scaling. This should be fixed; at the same time a new load
flag should be introduced, to be used in combination with
FT_LOAD_NO_SCALE, which indicates that font units are returned in
16.16 format. Similarly, the incremental interface should be
extended to allow fractional values for metrics.
* include/freetype/internal/psaux.h (T1_BuilderRec): Remove `shift'
field.
* include/freetype/internal/pshints.h (T1_Hints_SetStemFunc,
T1_Hints_SetStem3Func): Use FT_Fixed for coordinates.
* src/psaux/psobjs.c: Include FT_INTERNAL_CALC_H.
(t1_build_add_point): Always convert fixed to integer.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings):
Use 16.16 format everywhere (except for large integers followed by a
`div').
[CAN_HANDLE_NON_INTEGRAL_T1_OPERANDS]: Remove #ifdef and activate
code uncoditionally.
Add support for random numbers and update remaining code
accordingly; this should work now.
(t1_operator_seac): Updated.
* src/psaux/pshrec.c: Include FT_INTERNAL_CALC_H.
(ps_hints_t1stem3, t1_hints_stem): Updated.
* src/cid/cidgload.c: Include FT_INTERNAL_CALC_H.
(cid_load_glyph) [FT_CONFIG_OPTION_INCREMENTAL],
(cid_face_compute_max_advance, cid_slot_load_glyph): Updated.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String)
[FT_CONFIG_OPTION_INCREMENTAL], (T1_Get_Advances, T1_Load_Glyph):
Updated.
* src/type1/t1load.c: Include FT_INTERNAL_CALC_H.
* src/type1/t1objs.c (T1_Face_Init): Updated.
Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
* include/freetype/internal/autohint.h add macros to init
instances of FT_AutoHinter_ServiceRec.
* src/autofit/afmodule.h declare autofit_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/autofit/afmodule.c when FT_CONFIG_OPTION_PIC is defined
af_autofitter_service and autofit_module_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from afpic.h in order to access them.
* src/autofit/aftypes.h add macros to init and declare
instances of AF_ScriptClassRec.
* src/autofit/afcjk.h declare af_cjk_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afcjk.c when FT_CONFIG_OPTION_PIC is defined
af_cjk_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/afdummy.h declare af_dummy_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afdummy.c when FT_CONFIG_OPTION_PIC is defined
af_dummy_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/afindic.h declare af_indic_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/afindic.c when FT_CONFIG_OPTION_PIC is defined
af_indic_script_class struct will have function to init it instead of
being allocated in the global scope.
* src/autofit/aflatin.h declare af_latin_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/aflatin.c when FT_CONFIG_OPTION_PIC is defined
af_latin_script_class struct will have function to init it instead of
being allocated in the global scope.
Change af_latin_blue_chars to be PIC-compatible by being a two
dimentional array rather than array of pointers.
* src/autofit/aflatin2.h declare af_latin2_script_class
using macros from aftypes.h,
when FT_CONFIG_OPTION_PIC is defined init function will be declared.
* src/autofit/aflatin2.c when FT_CONFIG_OPTION_PIC is defined
af_latin2_script_class struct will have function to init it instead of
being allocated in the global scope.
Change af_latin2_blue_chars to be PIC-compatible by being a two
dimentional array rather than array of pointers.
* src/autofit/afglobal.c when FT_CONFIG_OPTION_PIC is defined
af_script_classes array initialization was moved to afpic.c and
is later refered using macros defeined in afpic.h.
New Files:
* src/autofit/afpic.h declare struct to hold PIC globals for autofit
module and macros to access them.
* src/autofit/afpic.c implement functions to allocate, destroy and
initialize PIC globals for autofit module.
* src/autofit/autofit.c add new file to build: afpic.c.
* src/autofit/jamfile add new files to FT2_MULTI build: afpic.c.
* include/freetype/internal/pshints.h add macros to init
instances of PSHinter_Interface.
* src/pshinter/pshmod.h declare pshinter_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/pshinter/pshmod.c when FT_CONFIG_OPTION_PIC is defined
pshinter_interface and pshinter_module_class structs
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from pshpic.h in order to access them.
New Files:
* src/pshinter/pshpic.h declare struct to hold PIC globals for pshinter
module and macros to access them.
* src/pshinter/pshpic.c implement functions to allocate, destroy and
initialize PIC globals for pshinter module.
* src/pshinter/pshinter.c add new file to build: pshpic.c.
* src/pshinter/jamfile add new files to FT2_MULTI build: pshpic.c.
* include/freetype/internal/services/svpscmap.h add macros to init
instances of FT_Service_PsCMapsRec.
* src/psnames/psmodule.h declare psnames_module_class
using macros from ftmodapi.h,
when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/psnames/psmodule.c when FT_CONFIG_OPTION_PIC is defined
pscmaps_interface and pscmaps_services structs
and psnames_module_class array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from pspic.h in order to access them.
New Files:
* src/psnames/pspic.h declare struct to hold PIC globals for psnames
module and macros to access them.
* src/psnames/pspic.c implement functions to allocate, destroy and
initialize PIC globals for psnames module.
* src/psnames/psnames.c add new file to build: pspic.c.
* src/psnames/jamfile add new files to FT2_MULTI build: pspic.c.
* include/freetype/internal/services/svcid.h add macros to init
instances of FT_Service_CIDRec.
* include/freetype/internal/services/svpsinfo.h add macros to init
instances of FT_Service_PsInfoRec.
* src/cff/cffcmap.h declare cff_cmap_encoding_class_rec
and cff_cmap_unicode_class_rec using macros from
ftobjs.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/cff/cffcmap.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
cff_cmap_encoding_class_rec and cff_cmap_unicode_class_rec
will have functions to init or create and destroy them
instead of being allocated in the global scope.
* src/cff/cffdrivr.h declare cff_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/cff/cffdrivr.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
cff_service_glyph_dict, cff_service_ps_info, cff_service_ps_name
cff_service_get_cmap_info, cff_service_cid_info, cff_driver_class,
and cff_services array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from cffpic.h in order to access them
from the pic_container.
Use macros from cffpic.h in order to access the
structs allocated in cffcmap.c
* src/cff/cffobjs.c Use macros from cffpic.h in order to access the
structs allocated in cffcmap.c
* src/cff/parser.c when FT_CONFIG_OPTION_PIC is defined
implement functions to create and destroy cff_field_handlers array
instead of being allocated in the global scope.
And macros will be used from cffpic.h in order to access it
from the pic_container.
New Files:
* src/cff/cffpic.h declare struct to hold PIC globals for cff
driver and macros to access them.
* src/cff/cffpic.c implement functions to allocate, destroy and
initialize PIC globals for cff driver.
* src/cff/cff.c add new file to build: cffpic.c.
* src/cff/jamfile add new files to FT2_MULTI build: cffpic.c.
* include/freetype/internal/services/svbdf.h add macros to init
instances of FT_Service_BDFRec.
* include/freetype/internal/services/svgldict.h add macros to init
instances of FT_Service_GlyphDictRec.
* include/freetype/internal/services/svpostnm.h add macros to init
instances of FT_Service_PsFontNameRec.
* include/freetype/internal/services/svsfnt.h add macros to init
instances of FT_Service_SFNT_TableRec.
* include/freetype/internal/services/svttcmap.h add macros to init
instances of FT_Service_TTCMapsRec.
* include/freetype/internal/sfnt.h add macros to init
instances of SFNT_Interface.
* src/sfnt/sfdriver.h declare sfnt_module_class using macros from
ftmodapi.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/sfnt/sfdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
sfnt_service_sfnt_table, sfnt_service_glyph_dict, sfnt_service_ps_name
tt_service_get_cmap_info, sfnt_service_bdf, sfnt_interface,
sfnt_module_class, and sfnt_services array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from sfntpic.h in order to access them
from the pic_container.
* src/sfnt/ttcmap.h add macros to init
instances of TT_CMap_ClassRec.
* src/sfnt/ttcmap.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_cmap0_class_rec, tt_cmap2_class_rec, tt_cmap4_class_rec
tt_cmap6_class_rec, tt_cmap8_class_rec, tt_cmap10_class_rec,
tt_cmap12_class_rec, tt_cmap14_class_rec and tt_cmap_classes array
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from sfntpic.h in order to access them
from the pic_container.
The content of tt_cmap_classes is now described in the
new file 'ttcmapc.h'.
New Files:
* src/sfnt/sfntpic.h declare struct to hold PIC globals for sfnt
driver and macros to access them.
* src/sfnt/sfntpic.c implement functions to allocate, destroy and
initialize PIC globals for sfnt driver.
* src/sfnt/ttcmapc.h describing the content of
tt_cmap_classes allocated in ttcmap.c
* src/sfnt/sfnt.c add new file to build: sfntpic.c.
* src/sfnt/jamfile add new files to FT2_MULTI build: sfntpic.c.
* include/freetype/internal/services/svmm.h add macros to init
instances of FT_Service_MultiMastersRec.
* include/freetype/internal/services/svttglyf.h add macros to init
instances of FT_Service_TTGlyfRec.
* src/truetype/ttdriver.h declare tt_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/truetype/ttdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_service_gx_multi_masters, tt_service_truetype_glyf, tt_driver_class
and tt_services array,
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ttpic.h in order to access them
from the pic_container.
* src/truetype/ttobjs.c change trick_names array to be
PIC-compatible by being a two dimentional array rather than array
of pointers.
New Files:
* src/truetype/ttpic.h declare struct to hold PIC globals for truetype
driver and macros to access them.
* src/truetype/ttpic.c implement functions to allocate, destroy and
initialize PIC globals for truetype driver.
* src/truetype/truetype.c add new file to build: ttpic.c.
* src/truetype/jamfile add new files to FT2_MULTI build: ttpic.c.
* include/freetype/config/ftoption.h add FT_CONFIG_OPTION_PIC
* include/freetype/internal/ftobjs.h Add pic_container member to
FT_LibraryRec.
Add macros to declare and init instances of FT_CMap_ClassRec.
Add macros to init instances of FT_Outline_Funcs and FT_Raster_Funcs.
Add macros to declare, allocate and initialize modules
(FT_Module_Class).
Add macros to declare, allocate and initialize renderers
(FT_Renderer_Class).
Add macro to init instances of FT_Glyph_Class.
Add macros to declare, allocate and initialize drivers
(FT_Driver_ClassRec).
* include/freetype/internal/ftpic.h new file to declare the
FT_PIC_Container struct and the functions to allocate and detroy it.
* include/freetype/internal/ftserv.h add macros to allocate and
destory arrays of FT_ServiceDescRec.
* include/freetype/internal/internal.h define macro to include
ftpic.h.
New Files:
* src/base/ftpic.c implement functions to allocate and destory the
global pic_container.
* src/base/basepic.h declare struct to hold PIC globals for base and
macros to access them.
* src/base/basepic.c implement functions to allocate, destroy and
initialize PIC globals for base.
* src/base/ftinit.c when FT_CONFIG_OPTION_PIC is defined implement
functions that allocate and destroy ft_default_modules according to
FT_CONFIG_MODULES_H in the pic_container instead of the global scope
and use macro from basepic.h to access it.
* src/base/ftobjs.c add calls to the functions that allocate and
destroy the global pic_container when the library is created and
destroyed.
* src/base/jamfile add new files to FT2_MULTI build:
ftpic.c and basepic.c.
* src/base/ftbase.c add new files to build:
ftpic.c and basepic.c.
* src/base/ftglyph.c when FT_CONFIG_OPTION_PIC is defined
ft_bitmap_glyph_class and ft_outline_glyph_class will be allocated
in the pic_container instead of the global scope and use macros from
basepic.h to access them.
* src/base/ftbbox.c allocate bbox_interface stract on the stack
instead of the global scope when FT_CONFIG_OPTION_PIC is defined.
* src/base/ftstroke.c access ft_outline_glyph_class allocated in
ftglyph.c via macros from basepic.h