Based on a patch from Behdad.
* src/truetype/ttinterp.c (DO_*): Expand macros into corresponding
`Ins_*' functions.
(TT_RunIns): Replace `DO_*' macros with `Ins_*' function calls.
(ARRAY_BOUND_ERROR): Remove second definition, which is no longer
needed.
(Ins_SVTCA, Ins_SPVTCA, Ins_SFVTCA): Replaced with...
(Ins_SxyTCA): New function.
This is a follow-up patch.
* src/truetype/ttinterp.c, src/truetype/ttinterp.h
[TT_CONFIG_OPTION_STATIC_INTERPRETER,
TT_CONFIG_OPTION_STATIC_RASTER]: Remove macros and related code.
`API functions' are functions tagged with `FT_EXPORT_DEF'.
Besides trivial fixes, the following changes are included, too.
* src/base/ftbdf.c (FT_Get_BDF_Charset_ID, FT_Get_BDF_Property): Set
error code if no service is available.
* src/base/ftinit.c (FT_Done_FreeType): Change return value for
invalid `library' parameter to `Invalid_Library_Handle'.
* src/base/ftobjs.c (FT_New_Size): Change return value for invalid
`asize' parameter to `Invalid_Argument'.
* src/base/ftoutln.c (FT_Outline_Copy): Change return value for
invalid `source' and `target' parameters to `Invalid_Outline'.
(FT_Outline_Done_Internal): Change return value for invalid
`outline' parameter to `Invalid_Outline'.
The functions in this patch *do* return non-trivial errors that must
be taken care of.
* src/autofit/afloader.c (af_loader_load_g), src/base/ftobjs.c
(FT_Render_Glyph_Internal), src/base/ftoutln.c (FT_Outline_Render),
src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_endchar>,
src/psaux/psobjs.c (ps_parser_load_field_table), src/psaux/t1decode
(t1_decoder_parse_charstrings) <op_endchar>, src/truetype/ttgload.c
(load_truetype_glyph <subglyph loop>, tt_loader_init,
TT_Load_Glyph), src/truetype/ttgxvar.c (TT_Set_MM_Blend),
src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep): Do it.
We use a cast to indicate that we intentionally ignore a function's
return value. However, this doesn't apply to API functions where
errors can only happen for trivially invalid input.
* src/base/ftstroke.c (FT_Glyph_Stroke, FT_Glyph_StrokeBorder),
src/base/ftsynth.c (FT_GlyphSlot_Embolden), src/cff/cffgload.c
(cff_slot_load), src/pfr/pfrdrivr.c (pfr_get_kerning),
src/type1/t1load.c (parse_encoding), src/type42/t42parse.c
(t42_parse_encoding): Do it.
Before this patch, it was impossible to ever call DELTAP[123] in
subpixel hinting mode as described in the ClearType whitepaper; it
only worked if in `compatibility mode'. However, compatibility mode
essentially disables SHPIX, completely ruining hinting of
ttfautohint output, for example.
We now follow the whitepaper more closely so that DELTAP[123]
instructions for touched points in the non-subpixel direction are
executed.
Zero distance does not have to be treated specially if you follow
specifications and check the sign as the very last step of rounding.
* src/truetype/ttinterp.c (Round_None, Round_To_Grid,
Round_Down_To_Grid, Round_Up_To_Grid, Round_To_Double_Grid): Use
macros when available, do not check for non-zero distance.
(Round_To_Half_Grid, Round_Super, Round_Super_45): Ditto, return phase
if sign changed.
Suggested by Doug Felt <dougfelt@gmail.com>.
* src/sfnt/ttsbit.c (tt_sbit_decoder_load_metrics): Set
`vertAdvance' to zero...
* src/truetype/ttgload.c (TT_Load_Glyph): ... and set here a default
value for `vertAdvance' based on `linearVertAdvance' in case
`vertAdvance' is zero. Note that the previous computed ad-hoc value
for `linearVertAdvance' was apparently not tested in a real-life
situation.
The legal range for delta shift is zero through six. Negative values
are illegal according to
https://developer.apple.com/fonts/TrueType-Reference-Manual/RM04/Chap4.html#delta%20shift
* src/truetype/ttobjs.h (delta_shift, delta_base): Make unsigned.
* src/truetype/ttinterp.h (DO_SDS): Throw an error if delta_shift
out of range.
(Ins_DELTAP, Ins_DELTAC): Optimize for legal delta_shift.
* src/truetype/ttinterp.h (TT_ExecContextRec): New field
`cur_ppem_func' with a function pointer.
* src/truetype/ttinterp.c (TT_RunIns): Initialize `cur_ppem_func'
depending on the pixel geometry to either...
(Current_Ppem_Stretched): ... this for stretched pixels.
(Current_Ppem): ... or this for square pixels.
(DO_MPPEM, DO_MPS, Ins_DELTAP, Ins_DELTAC): Use `cur_ppem_func'.
In case of an error in the `prep' table, no longer try to execute it
again and again. This makes FreeType handle endless loops in buggy
fonts much faster.
* src/truetype/ttobjs.h (TT_SizeRec): The fields `bytecode_ready'
and `cvt_ready' are now negative if not initialized yet, otherwise
they indicate the error code of the last run.
* src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep,
tt_size_done_bytecode, tt_size_init_bytecode,
tt_size_ready_bytecode, tt_size_init, tt_size_done, tt_size_reset):
Updated.
* src/truetype/ttgload.c (tt_loader_init): Updated.
* src/truetype/ttinterp.c (TT_RunIns): Force reexecution of `fpgm'
and `prep' only if we are in the `glyf' table.
This patch unifies the subpixel and non-subpixel cases.
* src/truetype/ttinterp.h (TT_ExecContextRec): Remove
`grayscale_hinting'; all code should refer to `grayscale' instead.
Remove unused `native_hinting' member.
Rename `subpixel_hinting' member to `subpixel.
* src/truetype/ttgload.c (TT_LOADER_SET_PP): Updated.
(tt_loader_init): Updated.
* src/truetype/ttinterp.c (Ins_GETINFO): Simplify.
Updated.
Problem reported by Nigel Tao <nigeltao@golang.org>.
* src/truetype/ttgload.c (TT_Hint_Glyph): Remove code that shifts
the glyph (component) by a fractional value computed from the LSB
phantom point. This is wrong, since the horizontal phantom points
get rounded horizontally later on.
Greg Hitchcock provided very interesting insights into the
complicated history of the horizontal positions of the TSB and BSB
phantom points.
* src/truetype/ttgload.c (TT_LOADER_SET_PP)
[TT_CONFIG_OPTION_SUBPIXEL_HINTING]: Use `subpixel_hinting' and
`grayscale_hinting' flags as conditionals for the x position of TSB
and BSB.
This is a further improvement to the changes from 2013-11-06.
* src/truetype/ttgload.c (TT_Hint_Glyph): Horizontal phantom points
are rounded horizontally, vertical ones are rounded vertically.
(TT_LOADER_SET_PP): The horizontal position of vertical phantom
points in pre-ClearType mode is zero, as shown in the OpenType
specification.
Problem reported by Akira Kakuto <kakuto@fuk.kindai.ac.jp>.
* src/truetype/ttgload.c (TT_Load_Simple_Glyph): Protect call to
`Update_Max' with both a TT_USE_BYTECODE_INTERPRETER guard and a
`IS_HINTED' clause.
Also remove redundant check using `maxSizeOfInstructions' – in
simple glyphs, the bytecode data comes before the outline data, and
a validity test for this is already present.
Problem reported by Hin-Tak Leung <htl10@users.sourceforge.net>; see
http://lists.nongnu.org/archive/html/freetype-devel/2013-08/msg00005.html
for details.
* src/base/ftobjs.c (FT_Load_Glyph): Check size of `fpgm' and `prep'
tables also for setting `autohint'.
* src/truetype/ttgload.c (TT_Load_Simple_Glyph): Use code from
`TT_Process_Composite_Glyph' for handling unreliable values of
`maxSizeOfInstructions'.
Problem reported by Nigel Tao <nigeltao@golang.org>.
This is a follow-up commit to the previous one.
* src/truetype/ttgload.c (load_truetype_glyph): Call
`tt_get_metrics' after loading the glyph header.
This commit also improves the start values of vertical phantom
points. Kudos to Greg Hitchcock for help.
* src/truetype/ttgload.c (TT_Get_VMetrics): Add parameter to pass
`yMax' value. Replace code with fixed Microsoft definition.
(tt_get_metrics): Updated.
(TT_LOADER_SET_PP): Add explanation how to initialize phantom
points, taken from both the OpenType specification and private
communication with Greg (which will eventually be added to the
standard).
Fix horizontal position of `pp3' and `pp4'.
* src/truetype/ttgload.h: Updated.
* src/truetype/ttdriver.c (tt_get_advances): Updated.
* docs/CHANGES: Updated.
Two benefits: The allocated FDEF (and IDEF) array gets slightly
smaller, and the `ttdebug' demo program has access to function
numbers without additional costs.
Fortunately, no changes to FontForge are necessary – this is the
only external TrueType debugger I know of, but others may exist and
should check the code accordingly.
* src/truetype/ttinterp.h (TT_CallRec): Replace `Cur_Restart' and
`Cur_End' with a pointer to the corresponding `TT_DefRecord'
structure.
* src/truetype/ttinterp.c (DO_JROT, DO_JMPR, DO_JROF, Ins_ENDF,
Ins_CALL, Ins_LOOPCALL, Ins_UNKNOWN, TT_RunIns <Invalid_Opcode>):
Updated.
When using `ADD' with an immediate operand, the instruction is
actually `ADD Rd, Rn, #<imm12>', that is, the maximum of the
immediate operand cannot exceed 4095. It will fail to compile with
LLVM.
However, in GCC, due to some legacy compatibility considerations,
`ADD.W' will be automatically emitted when the immediate operand is
larger than 4095.
* builds/unix/ftconfig.in, include/freetype/config/ftconfig.h
(FT_MulFix_arm) [__GNUC__]: Support clang compiler.
* src/truetype/ttinterp.c (TT_MulFix14_arm) [__GNUC__]: Ditto.
We simply synthesize a SFNT from the WOFF, create a memory stream
for the new data, and load the SFNT as usual.
Does NOT add any API to access WOFF metadata or private blocks.
* include/freetype/internal/tttypes.h (WOFF_HeaderRec,
WOFF_TableRec): New structures.
* include/freetype/tttags.h (TTAG_wOFF): New macro.
* src/base/ftobjs.c (FT_Open_Face): Set `stream' after calling
`open_face'.
* src/sfnt/sfobjs.c [FT_CONFIG_OPTION_SYSTEM_ZLIB]: Include
`FT_GZIP_H'.
(WRITE_BYTE, WRITE_USHORT, WRITE_ULONG): New temporary macros for
writing to a stream.
(sfnt_stream_close, compare_offsets, woff_open_font): New functions.
(sfnt_open_font): Handle `TTAG_wOFF'.
(sfnt_init_face): Set `stream' after calling `sfnt_open_font'.
* src/truetype/ttobjs.c (tt_face_init): Set `stream' after calling
`sfnt->init_face'.
* src/base/ftobjs.c (open_face): Use a pointer to FT_Stream as an
argument so that a changed stream survives.
Update callers.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
* src/truetype/ttinterp.c (TT_MulFix14_long_long,
TT_DotFix14_long_long): `#pragma gcc diagnostic {push,pop}' has been
introduced with gcc version 4.6.
This patch provides slightly optimized versions for ARM, x86, and
x86_64 CPUs if built with GCC.
Also remove some dead code.
* src/truetype/ttinterp.c (TT_MulFix14_arm, TT_MulFix14_long_long,
TT_DotFix14_long_long): New functions.
* src/truetype/ttgload.c (TT_Load_Glyph): Use the glyph's (scaled)
`linearHoriAdvance' if the sbit's `horiAdvance' value is zero.
Cf. font `Fixedsys Excelsior' v3.01 (FSEX300.ttf), glyph A, 16ppem.
Some small enhancements have allowed the removal of many macros and
the simplification of existing rules in `ttsubpix.c'.
* src/truetype/ttsubpix.h (SPH_TWEAK_ALLOW_X_DMOVEX,
SPH_TWEAK_ALLOW_X_MOVE_ZP2,
SPH_TWEAK_DELTAP_SKIP_EXAGGERATED_VALUES,
SPH_TWEAK_SKIP_INLINE_DELTAS, SPH_TWEAK_MIRP_CVT_ZERO): Removed.
(SPH_TWEAK_SKIP_NONPIXEL_Y_MOVES_DELTAP): New rule macro.
* src/truetype/ttsubpix.c: Updated affected rules.
* src/truetype/ttinterp.c (Direct_Move_X): Updated.
(INS_FDEF): Add additional function detection.
(INS_ENDF): Set runtime flag.
(Ins_CALL): Skip the call under certain conditions.
Remove bad code.
(Ins_LOOPCALL): Skip the call under certain conditions.
Remove bad code.
(Move_Zp2_Point): Updated.
(Ins_SHPIX): Updated.
Skip the move under some situations.
(Ins_MIAP): Improve conditions.
(Ins_MIRP): Updated.
(Ins_DELTAP): Skip move under certain conditions.
Simplify conditions.
(TT_RunIns): Updated.
Add code to handle new function detection.
Trace messages.
This makes the option TT_CONFIG_OPTION_SUBPIXEL_HINTING controllable
at runtime.
* src/truetype/ttdriver.c: Include FT_TRUETYPE_DRIVER_H.
(tt_property_set, tt_property_get): Fill templates.
* src/truetype/ttobjs.h (TT_DriverRec): Add `interpreter_version'
member.
Remove unused `extension_component' member.
* src/truetype/ttgload.c: Include FT_TRUETYPE_DRIVER_H.
(tt_get_metrics, TT_Hint_Glyph, TT_Process_Simple_Glyph,
compute_glyph_metrics, tt_loader_init): Use `interpreter_version'.
* src/truetype/ttinterp.c: Include FT_TRUETYPE_DRIVER_H.
(SUBPIXEL_HINTING): New macro to check `interpreter_version' flag.
Update all affected functions to use it.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
* src/truetype/ttobjs.c: Include FT_TRUETYPE_DRIVER_H.
(tt_driver_init): Initialize `interpreter_version'.
* src/truetype/ttsubpix.c: Include FT_TRUETYPE_DRIVER_H.
Use TT_INTERPRETER_VERSION_XXX where appropriate.
* src/truetype/ttdrivr.c: Include FT_SERVICE_PROPERTIES_H.
(tt_property_set, tt_property_get): New functions, still empty.
Define `tt_service_properties' service.
Update `tt_services'.
* src/truetype/ttpic.h: Include FT_SERVICE_PROPERTIES_H.
(TT_SERVICE_PROPERTIES_GET): New macro.
(TTModulePIC): Add `tt_service_properties'.
* src/base/ftcalc.c (FT_DivFix): Use unsigned values for
computations which use the left shift operator and convert to signed
as the last step.
* src/base/fttrigon.c (ft_trig_prenorm, FT_Vector_Rotate,
FT_Vector_Length, FT_Vector_Polarize): Ditto.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Simplify.
* src/cff/cffload.c (cff_subfont_load): Fix constant.
* src/cff/cffparse.c (cff_parse_integer, cff_parse_real, do_fixed,
cff_parse_fixed_dynamic): Use unsigned values for computations which
use the left shift operator and convert to signed as the last step.
* src/cid/cidload.c (cid_get_offset): Ditto.
* src/psaux/psconv.c (PS_Conv_ToFixed): Ditto.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Ditto.
* src/truetype/ttinterp.c (TT_MulFix14, TT_DotFix14): Ditto.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
BTW, Greg agrees that the OpenType specification is missing the list
of GS variables which will always be reset to the default values
after the `prep' table has been executed.
Up to now, we simply took a snapshot of the Graphics State after the
`prep' table has been executed, and right before a glyph's bytecode
was run it got reloaded. However, as Greg Hitchcock has told us in
private communication, reference points get reset to zero in the MS
rasterizer and we follow in due course. While reasonable, this is
undocumented behaviour.
Most notably, this fixes the rendering of Arial's `x' glyph in
subpixel hinting mode.
* src/truetype/ttsubpix.h: Updated.
(SPH_X_SCALING_RULES_SIZE): Moved and renamed to...
* src/truetype/ttsubpix.c (X_SCALING_RULES_SIZE): This.
(sph_X_SCALING_Rules): Removed.
(scale_test_tweak): Make function static.
(sph_test_tweak_x_scaling): New function.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph): Updated.
* include/freetype/fttrigon.h (FT_Hypot): Declare it.
* src/base/fttrigon.c (FT_Hypot): Define it.
* src/truetype/ttgload.c (TT_Process_Composite_Component): Use it
instead of explicit expressions.
* src/truetype/ttinterp.c (Current_Ratio, Normalize): Use it instead
of TT_VecLen.
(TT_VecLen): Removed.
* src/truetype/ttobjs.c (tt_size_reset): The Windows rendering
engine uses rounded values of the ascender and descender to compute
the TrueType font height.
This patches fixes many issues with the ttsubpix implementation.
1. Data tables are defined, instead of declared, in the header, and
thus copied into each source file that includes it.
2. These tables were defined as global, mutable, visible variables,
and thus costing private RAM to every process that loads the
library (> 50 KB / process, this is huge!).
Additionally, this also made the library export the symbols
completely needlessly.
3. Missing `sph_' and `SPH_' prefixes to some of the definitions.
Note that this doesn't try to fix the incredibly inefficient storage
format for the data tables used by the code. This one will require
another pass in the future.
* src/truetype/ttinterp.h (MAX_NAME_SIZE, MAX_CLASS_MEMBERS):
Renamed to...
(SPH_MAX_NAME_SIZE, SPH_MAX_CLASS_MEMBERS): This.
Update all users.
(SPH_TweakRule, SPH_ScaleRule): Decorate with `const' where
appropriate.
(Font_Class): Rename to...
(SPH_Font_Class): This. Decorate with `const' where appropriate.
* src/truetype/ttsubpix.h (scale_test_tweak, sph_test_tweak):
Decorate arguments with `const' where appropriate.
Move font tweaking tables to...
* src/truetype/ttsubpic.c: This file and decorate them with `static'
and `const' where appropriate.
(X_SCALING_Rules, X_SCALING_RULES_SIZE): Renamed to...
(spu_X_SCALING_Rules, SPH_X_SCALING_RULES_SIZE): This.
Update all users.
Unit vector components are stored as 2.14 fixed-point numbers. In
order to calculate all 14 bits accurately, a short vector to be
normalized has to be upscaled to at least 14 bits before its length
is calculated. This has been safe since accurate CORDIC algorithms
were adopted.
* src/truetype/ttinterp.c (Normalize): Scale short vectors by 0x4000.
Back in the days, vector length calculations were not very accurate
and the vector normalization function, Normalize, had to meticulously
correct the errors for long vectors [commit b7ef2b0968]. It was no
longer necessary after accurate CORDIC algorithms were adopted, but
the code remained. It is time to kill it.
* src/truetype/ttinterp.c (Normalize): Remove error compensation.
(TT_VecLen): Remove any mention of old less accurate implementation.
* include/freetype/internal/ftserv.h (FT_SERVICE_UNAVAILABLE): Use
`logical not' operator instead of negation. The idea is that `~'
returns exactly the data type enforced by the cast to a pointer (be
it 32bit or 64bit or whatever), while a negative integer has not
this flexibility.
* src/cache/ftccmap.c (FTC_CMAP_UNKNOWN): Ditto.
* src/truetype/ttgxvar.c (ALL_POINTS, TT_Get_MM_Var): Ditto.
* src/type/t1load.c (T1_Get_MM_Var): Ditto.
(parse_blend_axis_types): Use cast.
* src/bdf/bdflib.c (_bdf_readstream): Use cast.
The dot product between freeVector and projVector or cosine of
the angle between these FT_F2Dot14 unit vectors used to be scaled up
by 4 and routinely occupied 32 bits in an FT_Long field F_dot_P.
This patch scales the value down by 2^14 instead, which simplifies
its use throughout the bytecode interpreter.
This does not lead to the loss of precision because the lower bits
are unreliable anyway. Consider two unit vectors (1,0) and (.6,.8)
for which the true value of F_dot_P is .6 * 0x40000000 = 0x26666666.
These vectors are stored as (0x4000,0) and (0x2666,0x3333) after
rounding and F_dot_P is assigned 0x26660000. The lower bits were
already lost while rounding the unit vector components.
Besides code simplification, this change can lead to better
performance when FT_MulDiv with the scaled-down F_dot_P is less
likely to use the costly 64-bit path. We are not changing the type
of F_dot_P to FT_F2Dot14 at this point.
* src/truetype/ttinterp.c (Compute_Funcs): Scale F_dot_P down by 14
bits and modify its use accordingly.
(Direct_Move, Direct_Move_Orig, Compute_Point_Displacement): Modify
the use of F_dot_P field.
* src/truetype/ttobjs.c (tt_size_run_fpgm): Change arbitrary
assignment of F_dot_P to its theoretical maximum in case we decide
to scale back its type later.
* src/truetype/ttinterp.c (TT_DivFix14): New macro.
(Normalize): Use it here.
(Current_Ratio): Use TT_MulFix14 instead of FT_MulDiv.
(Ins_SHPIX): Cancel out two TT_MulFix14 calls.
* src/truetype/ttinterp.c (Ins_ISECT): Use angle between vectors to
avoid grazing intersections. The previous threshold was too coarse,
incorrectly rejecting short but valid vectors.
* include/freetype/internal/ftcalc.h (FT_MulDiv_No_Round): Don't
enclose with `TT_USE_BYTECODE_INTERPRETER'; we now need the function
elsewhere also.
* src/autofit/afcjk.h: Use AF_CONFIG_OPTION_CJK.
* src/truetype/ttgload.c (tt_loader_init): Fix compiler warning.
* src/truetype/ttinterp.c (Ins_MSIRP): Fix compiler warning.
* src/truetype/ttinterp.h: Use
TT_CONFIG_OPTION_BYTECODE_INTERPRETER.
This is the large, famous `Infinality' patch to support ClearType
bytecode which has been available from
http://www.infinality.net/blog/ for some time, and which has been
refined over the last years. While still experimental, it is now
mature enough to be included directly into FreeType.
Most of the code is based on the ClearType whitepaper written by
Greg Hitchcock
http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx
which gives a detailed overview of the necessary changes to the
Microsoft rasterizer so that older fonts are supported. However, a
lot of details are still missing, and this patches provides a
framework to easily handle rendering issues down to the glyph level
of certain fonts.
Note that ClearType support is not completely implemented! In
particular, full support for the options `compatible_widths',
`symmetrical_smoothing, and `bgr' (via the GETINFO bytecode
instruction) is missing.
* src/truetype/ttsubpix.c: New file, providing code to handle
`tweaks', this is, rules for certain glyphs in certain fonts
(including wildcards) which need a special treatment.
* src/truetype/ttsubpix.h: New file, holding the tweaking rules.
* include/freetype/config/ftoption.h, src/devel/ftoption.h
(TT_CONFIG_OPTION_SUBPIXEL_HINTING): New macro.
* include/freetype/internal/ftobjs.h (FT_PIX_FLOOR_GRID,
FT_PIX_ROUND_GRID, FT_PIX_CEIL_GRID): New macros.
* src/truetype/truetype.c [TT_USE_BYTECODE_INTERPRETER]: Include
`ttsubpix.c'.
* src/truetype/ttgload.c: Include `ttsubpix.h'.
[All changes below are guarded by TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(tt_get_metrics): Set tweak flags.
(TT_Hint_Glyph): Call `FT_Outline_EmboldenXY' if necessary.
(TT_Process_Simple_Glyph): Compensate emboldening if necessary.
(compute_glyph_metrics): Handle `compatible widths' option.
(tt_loader_init): Handle ClearType GETINFO information bits.
* src/truetype/rules.mk (TT_DRC_SRC): Updated.
* src/truetype/ttinterp.c: Include `ttsubpix.h'.
[Where necessary, changes below are guarded by
TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(Direct_Move, Direct_Move_X): Extended.
(Round_None, Round_To_Grid, Round_To_Half_Grid, Round_Down_To_Grid,
Round_Up_To_Grid, Round_To_Double_Grid, Round_Super, Round_Super_45,
SetSuperRound): Add parameter to handle the number of grid lines per
pixel.
(SET_SuperRound, ROUND_None, CUR_Func_round): Updated.
(DO_SROUND, DOS45ROUND, DO_ODD, DO_EVEN): Updated.
(DO_ROUND, DO_NROUND): Updated.
(DO_RS): Take care of `Typeman' bytecode patterns.
(Ins_FDEF): Add some debugging code. Commented out.
(Ins_ENDF): Restore state.
(Ins_CALL, Ins_LOOPCALL): Handle inline delta functions.
(Ins_MD): Handle `Vacuform' rounds.
(Move_Zp2_Point, Ins_SHPIX, Ins_MSIRP, Ins_MDAP, Ins_MIAP,
Ins_MDRP, Ins_MIRP): Handle tweaks.
(Ins_ALIGNRP): Add tweak guard.
(Ins_IUP, Ins_DELTAP): Handle tweaks.
(Ins_GETINFO): Handle new ClearType bits.
(TT_RunIns): Handle tweaks.
* src/truetype/ttinterp.h: Updated.
(SPH_TweakRule, SPH_ScaleRule): New structures for tweaks.
(TT_ExecContextRec): Add members for subpixel hinting support.
* src/truetype/ttobjs.h (TT_DefRecord): Add `inline_delta' member.
NEC FA family dated in 1996 have different checksum.
Reported by Johnson Y. Yan <yinsen_yan@foxitsoftware.com>; see
http://lists.gnu.org/archive/html/freetype-devel/2012-06/msg00023.html
* src/truetype/ttobjs.c (tt_check_trickyness_sfnt_ids): 4 sets
of fpgm & prep table checksums for FA-Gothic, FA-Minchou,
FA-RoundedGothicM, FA-RoundedGothicB are added. The family
names in sample PDF are truncated, thus the list of the
family names in tt_check_trickyness_family() is not updated yet.
* src/truetype/ttinterp.c (DO_SSW): SSW *does* use font units. For
verification, it took some time to find a font which actually uses
this instruction.
* src/truetype/ttinterp.c (Ins_MIRP): Typo, present since ages. The
code is now in sync with the other operators (e.g. MSIRP) which
modify twilight points.
Jump instructions are now bound to the current function. The MS
Windows rasterizer behaves the same, as confirmed by Greg Hitchcock.
* src/truetype/ttinterp.h (TT_CallRec): Add `Cur_End' element.
* src/truetype/ttobjs.h (TT_DefRecord): Add `end' element.
* src/truetype/ttinterp.c (DO_JROT, DO_JMPR, DO_JROF): Check upper
bound of jump address.
(Ins_FDEF, Ins_CALL, Ins_LOOPCALL, Ins_UNKNOWN, TT_RunIns): Updated.
Originally FT_DEFINE_{DRIVER,MODULE,RENDERER}() macros were
designed to declare xxx_pic_{free,init} by themselves.
Because these macros are used at the end of the module
interface (e.g. ttdriver.c) and the wrapper source to build
a module as a single object (e.g. truetype.c) includes
the PIC file (e.g. ttpic.c) before the module interface,
these macros are expanded AFTER xxx_pic_{free,init} body
when the modules are built as single object.
The declaration after the implementation causes the redundant
declaration warnings, so the declarations are moved to module
PIC headers (e.g. ttpic.h). Separating to other header files
are needed for multi build.
* include/freetype/internal/ftdriver.h (FT_DEFINE_DRIVER):
Remove class_##_pic_free and class_##_pic_init declarations.
* include/freetype/internal/ftobjs.h (FT_DEFINE_RENDERER,
FT_DEFINE_MODULE): Ditto.
* src/base/basepic.h: Insert a comment and fix coding style.
* src/autofit/afpic.h: Declare autofit_module_class_pic_{free,
init}.
* src/cff/cffpic.h: Declare cff_driver_class_pic_{free,init}.
* src/pshinter/pshpic.h: Declare pshinter_module_class_pic_{free,
init}.
* src/psnames/pspic.h: Declare psnames_module_class_pic_{free,
init}.
* src/raster/rastpic.h: Declare
ft_raster{1,5}_renderer_class_pic_{free,init}
* src/sfnt/sfntpic.h: Declare sfnt_module_class_pic_{free,init}.
* src/smooth/ftspic.h: Declare
ft_smooth_{,lcd_,lcdv_}renderer_class_pic_{free,init}.
* src/truetype/ttpic.h: Declare tt_driver_class_pic_{free,init}.
Under PIC configuration, FT_{CFF,PSCMAPS,SFNT,TT}_SERVICES_GET
take no arguments but derefer the variable named `library'
internally.
* src/cff/cffdrivr.c (cff_get_interface): Declare `library' and
set it if non-NULL driver is passed.
* src/truetype/ttdriver.c (tt_get_interface): Ditto.
* src/sfnt/sfdriver.c (sfnt_get_interface): Declare `library'
under PIC configuration, and set it if non-NULL module is given.
* src/psnames/psmodule.c (psnames_get_interface): Ditto.
error codes with per-module prefix.
* src/autofit/afpic.c: Include `aferrors.h'.
* src/cff/cffpic.c: Include `cfferrs.h'.
* src/pshinter/pshpic.c: Include `pshnterr.h'.
* src/raster/rastpic.c: Include `rasterrs.h'.
* src/sfnt/sfntpic.c: Include `sferrors.h'.
* src/smooth/ftspic.c: Include `ftsmerrs.h'.
* src/truetype/ttpic.c: Include `tterrors.h'.
Previously, FreeType misleadingly returned
FT_Err_Unknown_File_Format if a module was missing (or a test was
missing completely).
* include/freetype/fterrdef.h (FT_Err_Missing_Module): Define.
* src/cff/cffobjs.c (cff_face_init), src/cid/cidobjs.c
(cid_face_init), src/sfnt/sfobjs.c (sfnt_init_face),
src/truetype/ttobjs.c (tt_face_init), src/type1/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init,
T42_Driver_Init): Updated.
* src/type1/t1afm.c (T1_Read_Metrics), src/type/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init): Remove now
redundant test for `psaux'.
* include/freetype/config/ftstdlib.h (FT_USHORT_MAX): New macro.
* src/base/ftbitmap.c (FT_Bitmap_Convert): Protect against invalid
value of `target->rows'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Add check for
flex start.
* src/raster/ftrend1.c (ft_raster1_render): Check `width' and
`height'.
* src/truetype/ttgxvar.c (TT_Vary_Get_Glyph_Deltas): Protect against
invalid values in `localpoints' array.
We want to unset FT_FACE_FLAG_SCALABLE only if there are bitmap
strikes in the font.
* src/truetype/ttobjs.c (tt_face_init): Implement it.
* docs/CHANGES: Updated.
* src/truetype/ttobjs.c (tt_check_trickyness_sfnt_ids):
Add 8 checksum sets for NEC FA family. For the tricky fonts
without some tables (e.g. NEC FA fonts lack cvt table),
extra check is added to assure that 0-length table in the
registry is not included in the font.
Some PDF generators mangle the family name badly, prioritize
the check by the sfnt table checksums than the check by the
family name. For sample PDF, see
http://lists.gnu.org/archive/html/freetype-devel/2011-04/msg00073.html
* src/truetype/ttobjs.c (tt_check_trickyness): Exchange the order
of tt_check_trickyness_family() and tt_check_trickyness_sfnt_ids().
This makes FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH redundant,
deprecated, and ignored. The new behavior is what every major user
of FreeType has been requesting. Global advance is broken in many
CJK fonts. Just ignoring it by default makes most sense.
* src/truetype/ttdriver.c (tt_get_advances),
src/truetype/ttgload.c (TT_Get_HMetrics, TT_Get_VMetrics,
tt_get_metrics, compute_glyph_metrics, TT_Load_Glyph),
src/truetype/ttgload.h: Implement it.
* docs/CHANGES: Updated.
* src/truetype/interp.c: Set even more TT_Err_Invalid_Reference
error codes only if pedantic hinting is active. At the same time,
try to provide sane values which hopefully allow useful
continuation. Exception to this is CALL and LOOPCALL – due to
possible stack corruption it is necessary to bail out.
* src/truetype/ttinterp.c (TT_RunIns, Ins_FLIPPT, Ins_DELTAP,
Ins_DELTAC): Exit with error only if `pedantic_hinting' is set.
Otherwise, try to do something sane.
Thanks to Greg Hitchcock who explained the issue.
* src/truetype/ttinterp.c (Ins_MIRP): Replace a `>=' operator with
`>' since the description in the specification is incorrect.
This fixes, for example, glyph `two' in font `Helvetica Neue LT Com
65 medium' at 15ppem.
Some Latin TrueType fonts are still expected to be unhinted.
Fix Savannah bug #31645.
* src/truetype/ttobjs.c (tt_check_trickyness): Divided to...
(tt_check_trickyness_family): this checking family name, and
(tt_check_trickyness_sfnt_ids): this checking cvt/fpgm/prep.
(tt_get_sfnt_checksum): Function to retrieve the sfnt checksum
for specified subtable even if cleared by lazy PDF generators.
(tt_synth_sfnt_checksum): Function to calculate the checksum.
Reported by Johnson Y. Yan <yinsen_yan@foxitsoftware.com>.
* src/truetype/ttpload.c (tt_face_load_loca): While sanitizing,
handle case where `loca' is the last table in the font.
On LLP64 platforms (e.g. Win64), long (32-bit) cannot cover
the memory address (64-bit). Also the casts from the pointer
type to long int should be removed to preserve the address
correctly.
* src/raster/ftraster.c (New_Profile): Replace "%lx" by "%p".
(End_Profile) Ditto.
* src/truetype/ttinterp.c (Init_Context): Ditto.
* src/truetype/ttpload.c (tt_face_get_location): If `pos1', the
offset to the requested entry in `glyf' exceeds the end of the
table, return offset=0, length=0. If `pos2', the offset to the
next entry in `glyf' exceeds the end of the table, truncate
the entry length at the end of `glyf' table.
See Savannah bug #31040.
* src/truetype/ttinterp.c (free_buffer_in_size): Don't duplicate
FT_GlyphZoneRec size->twilight to be freed. If duplicated,
FT_FREE() erases the duplicated pointers only and leave original
pointers. They can cause the double-free crash when the burst
errors occur in TrueType interpreter and free_buffer_in_size()
is invoked repeatedly. See Savannah bug #31040 for detail.
* src/truetype/ttinterp.c (TT_RunIns): Decrease the trace level
showing the error when the interpreter returns with an error,
from FT_TRACE7() to FT_TRACE1().
* src/truetype/ttinterp.c (free_buffer_in_size): New function to
free the buffer allocated during the interpretation of this glyph.
(TT_RunIns): Unset FT_Face->size->{cvt_ready,bytecode_ready} if
an error occurs in the bytecode interpretation. The interpretation
of invalid bytecode may break the function definitions and referring
them in later interpretation is danger. By unsetting these flags,
`fpgm' and `prep' tables are executed again in next interpretation.
Fix Savannah bug #30798, reported by Robert Swiecki.
* src/truetype/ttinterp.c (BOUNDSL): New macro.
Change `BOUNDS' to `BOUNDSL' where appropriate.
* src/truetype/ttinterp.h (TT_ExecContextRec): Fix type of
`cvtSize'.
Acroread does the same.
* src/truetype/ttgload.c (TT_Process_Composite_Glyph): Call
`Update_Max' to adjust size of instructions array if necessary and
add a rough safety check.
(load_truetype_glyph): Save `loader->byte_len' before recursive
call.
* src/truetype/ttinterp.h, src/truetype/ttinterp.c (Update_Max):
Declare it as FT_LOCAL.
Initialize phantom points before calling the incremental interface
to update glyph metrics.
* src/truetype/ttgload.c (tt_get_metrics_incr_overrides)
[FT_CONFIG_OPTION_INCREMENTAL]: New function, split off from...
(tt_get_metrics): This.
Updated.
(load_truetype_glyph): Use tt_get_metrics_incr_overrides.
After long discussion, we now consider the character width vector
(wx,wy) returned by the `sbw' Type 1 operator as being part of *one*
direction only. For example, if you are using the horizontal
writing direction, you get the horizontal and vertical components of
the advance width for this direction. Note that OpenType and CFF fonts
don't have such a vertical component; instead, the GPOS table can be
used to generate two-dimensional advance widths (but this isn't
handled by FreeType).
* include/freetype/ftincrem.h (FT_Incremental_MetricsRec): Add
`advance_v' field to hold the vertical component of the advance
value.
* src/truetype/ttgload.c (tt_get_metrics), src/cff/cffgload.c
(cff_slot_load), src/type1/t1gload.c
(T1_Parse_Glyph_And_Get_Char_String), src/cid/cidgload.c
(cid_load_glyph): Use it.
Reported by Jeremy Manson <jeremy.manson@gmail.com>.
src/truetype/ttgload.c (load_truetype_glyph): Add parameter to
quickly load the glyph header only.
Update all callers.
(tt_loader_init): Add parameter to quickly load the `glyf' table
only.
Update all callers.
(TT_Load_Glyph): Compute linear advance values for embedded bitmap
glyphs too.
The calculation of `vertBearingX' is not defined in the OTF font
spec so FreeType does a `best effort' attempt. However, this value
is defined in the PDF and PostScript specs, and that algorithm is
better than the one FreeType currently uses:
FreeType: Use the middle of the bounding box as the X coordinate
of the vertical origin.
Adobe PDF spec: Use the middle of the horizontal advance vector as
the X coordinate of the vertical origin.
FreeType's algorithm goes wrong if you have a really small glyph
(like the full-width, circle-like dot at the end of the sentence, as
used in CJK scripts) with large bearings. With the FreeType
algorithm this dot gets centered on the baseline; with the PDF
algorithm it gets the correct location (in the top right). Note
that this is a serious issue, it's like printing the dot at the end
of a Roman sentence at the center of the textline instead of on the
baseline like it should. So i believe the PDF spec's algorithm
should be used in FreeType as well.
The `vertBearingY' value for such small glyphs is also very strange
if no `vmtx' information is present, since the height of the bbox is
not representable for the height of the glyph visually (the
whitespace up to the baseline is part of the glyph). The fix also
includes some code for a better estimate of `vertBearingY'.
* src/base/ftobjs.c (ft_synthesize_vertical_metrics): `vertBearingX'
is now calculated as described by the Adobe PDF Spec. Estimate for
`vertBearingY' now works better for small glyphs completely above or
below the baseline into account.
* src/cff/cffgload.c (cff_slot_load): `vertBearingX' is now
calculated as described by the Adobe PDF Spec. Vertical metrics
information was always ignored when FT_CONFIG_OPTION_OLD_INTERNALS
was not defined.
* src/truetype/ttgload.c (compute_glyph_metrics): `vertBearingX' is
now calculated as described by the Adobe PDF Spec.
* src/truetype/ttobjs.c (tt_size_init_bytecode): Don't reset x_ppem
and y_ppem. Otherwise the `*_CVT_Stretched' functions in ttinterp.c
get never called.
An anonymous guy suggested this change on Savannah, and it seems to
be the right solution.
Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
* include/freetype/internal/services/svmm.h add macros to init
instances of FT_Service_MultiMastersRec.
* include/freetype/internal/services/svttglyf.h add macros to init
instances of FT_Service_TTGlyfRec.
* src/truetype/ttdriver.h declare tt_driver_class using macros from
ftdriver.h, when FT_CONFIG_OPTION_PIC is defined create and destroy
functions will be declared.
* src/truetype/ttdriver.c when FT_CONFIG_OPTION_PIC is defined
the following structs:
tt_service_gx_multi_masters, tt_service_truetype_glyf, tt_driver_class
and tt_services array,
will have functions to init or create and destroy them
instead of being allocated in the global scope.
And macros will be used from ttpic.h in order to access them
from the pic_container.
* src/truetype/ttobjs.c change trick_names array to be
PIC-compatible by being a two dimentional array rather than array
of pointers.
New Files:
* src/truetype/ttpic.h declare struct to hold PIC globals for truetype
driver and macros to access them.
* src/truetype/ttpic.c implement functions to allocate, destroy and
initialize PIC globals for truetype driver.
* src/truetype/truetype.c add new file to build: ttpic.c.
* src/truetype/jamfile add new files to FT2_MULTI build: ttpic.c.
Werner Lemberg