Assure that FreeType's internal include directories are found before
`CPPFLAGS' (which might be set by the user in the environment), and
`CPPFLAGS' before `CFLAGS'.
* builds/freetype.mk (FT_CFLAGS): Don't add `INCLUDE_FLAGS'.
(FT_COMPILE): Make this a special variable for compiling only the
files handled in `freetype.mk'.
(.c.$O): Removed, unused.
* src/*/rules.mk (*_COMPILE): Fix order of include directories.
Don't cast cmap init function pointers to an incompatible type.
Without this patch, the number of parameters between declaration and
the real signature differs. Calling such a function results in
undefined behavior.
ISO/IEC 9899:TC3 (Committee Draft September 7, 2007)
6.5.2.2 Function calls
9 If the function is defined with a type that is not
compatible with the type (of the expression) pointed to by
the expression that denotes the called function, the
behavior is undefined.
On certain platforms (c -> js with emscripten) this causes
termination of execution or invalid calls because in the emscripten
implementation, function pointers of different types are stored in
different pointer arrays. Incorrect pointer type here results in
indexing of an incorrect array.
* src/cff/cffcmap.c (cff_cmap_encoding_init, cff_cmap_unicode_init),
src/pfr/pfrcmap.c (pfr_cmap_init), src/psaux/t1cmap.c
t1_cmap_standard_init, t1_cmap_expert_init, t1_cmap_custom_init,
t1_cmap_unicode_init), src/winfonts/winfnt.c (fnt_cmap_init): Fix
signature.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
src/smooth/ftgrays.c, src/base/ftobjc.s, src/sfobjs.c:
s/_Err_Bad_Argument/_Err_Invalid_Argument/. The former is for
errors in the bytecode interpreter only.
extern const FT_Module_Class
(or similar for C++). However, the actual types of the variables
being declared are often different, e.g., FT_Driver_ClassRec or
FT_Renderer_Class. (Some are, indeed, FT_Module_Class.)
This works with most C compilers (since those structs begin with an
FT_Module_Class struct), but technically it's undefined behavior.
To quote the ISO/IEC 9899:TC2 final committee draft, section 6.2.7
paragraph 2:
All declarations that refer to the same object or function shall
have compatible type; otherwise, the behavior is undefined.
(And they are not compatible types.)
Most C compilers don't reject (or even detect!) code which has this
issue, but the GCC LTO development branch compiler does. (It
outputs the types of the objects while generating .o files, along
with a bunch of other information, then compares them when doing the
final link-time code generation pass.)
Patch from Savannah bug #25133.
* src/base/ftinit.c (FT_USE_MODULE): Include variable type.
* builds/amiga/include/freetype/config/ftmodule.h,
include/freetype/config/ftmodule.h, */module.mk: Updated to declare
pass correct types to FT_USE_MODULE.
(cff_face_done), src/pfr/pfrobjs.c (pfr_face_done),
src/pcf/pcfdrivr.c (PCF_Face_Done), src/cid/cidobjs.c
(cid_face_done), src/bdf/bdfdrivr. (BDF_Face_Done),
src/sfnt/sfobjs.c (sfnt_face_done): Protect against face == 0.
Reported by Graham Asher.
FNT_Err_Invalid_File_Format if file format was recognized but
the file doesn't contain any FNT(NE) or RT_FONT(PE) resources.
Add verbose debug logs to make it easier to debug failing load
attempts.
(FNT_Face_Init): A single FNT font can't contain more than 1 face,
so return an error if requested face index is > 0.
Do not do further attempt to load fonts if a previous attempt has
failed but returned error FNT_Err_Invalid_File_Format, i.e., the
file format has been recognized but no fonts found in the file.
parsing.
(WinPE32_HeaderRec): New structure.
(WinPE32_SectionRec): New structure.
(WinPE_RsrcDirRec): New structure.
(WinPE_RsrcDirEntryRec): New structure.
(WinPE_RsrcDataEntryRec): New structure.
(FNT_FontRec): Remove unused `size_shift' field.
* src/winfonts/winfnt.c (fnt_face_get_dll_font): Add support for
loading bitmap .fon files in PE format.
test for a valid glyph index must be deferred to the font drivers.
This patch fixes Savannah bug #18301.
* src/base/ftobjs.c (FT_Load_Glyph): Don't check `glyph_index'.
* src/bdf/bdfdrivr.c (BDF_Glyph_Load), src/cff/cffgload.c
(cff_slot_load), src/cid/cidgload.c (cid_slot_load_glyph),
src/pcf/pcfdrivr.c (PCF_Glyph_Load), src/pfr/pfrobjs.c
(pfr_slot_load), src/truetype/ttdriver.c (Load_Glyph),
src/type1/t1gload.c (T1_Load_Glyph), src/winfonts/winfnt.c
(FNT_Load_Glyph): Check validity of `glyph_index'.
src/base/ftmac.c, src/base/ftrfork.c, src/lzw/ftzopen.c,
src/raster/ftrend1.c, src/sfnt/ttpost.c, src/truetype/ttgxvar.c,
src/type42/t42parse.c, src/winfonts/winfnt.c: hardening the code
against out-of-bounds conditions when allocating arrays. This is
for the cases where FT_NEW_ARRAY and FT_RENEW_ARRAY are not used
already. Introducing the new FT_ALLOC_MULT and FT_REALLOC_MULT
macros.
sufficient to modify a single file, `modules.cfg', to control the
inclusion of modules and base extension files.
This change also fixes the creation of ftmodule.h; it now depends on
`modules.cfg' and thus is rebuilt only if necessary.
Finally, a version of `ftoption.h' in OBJ_DIR is preferred over the
default location.
* modules.cfg: New file.
* builds/freetype.mk: Don't include `modules.mk'.
Include all `rules.mk' files as specified in `modules.cfg'.
(FTOPTION_FLAG, FTOPTION_H): New variables.
(FT_CFLAGS): Add macro definition for FT_CONFIG_MODULES_H.
Add FTOPTION_FLAG.
($(FT_INIT_OBJ)): Don't use FT_MODULE_LIST.
(CONFIG_H): Add FTMODULE_H and FTOPTION_H.
(INCLUDES): Add DEVEL_DIR.
(INCLUDE_FLAGS, FTSYS_SRC, FTSYS_OBJ, FTDEBUG_SRC, FTDEBUG_OBJ,
OBJ_M, OBJ_S): Use `:=', not `='.
(remove_ftmodule_h): New phony target to delete `ftmodule.h'.
(distclean): Add remove_ftmodule_h.
* builds/modules.mk: (MODULE_LIST): Removed.
(make_module_list, clean_module_list): Replace targets
with...
(FTMODULE_H_INIT, FTMODULE_H_CREATE, FTMODULE_H_DONE): New
variables. Reason for the change is that it is not possible to have
a phony prerequisite which is run only if the target file must be
rebuilt (phony prerequisites act like subroutines and are *always*
executed). We only want to rebuild `ftmodule.h' if `module.cfg' is
changed.
Update all callers.
($FTMODULE_H)): Rule to create `ftmodule.h', depending on
`modules.cfg'.
* builds/toplevel.mk: Rewrite and simplify module handling.
(MODULES_CFG, FTMODULE_H): New variables.
Include MODULES_CFG.
(MODULES): New variable to include all `module.mk' and `rules.mk'
files. We no longer use make's `wildcard' function for this.
* Makefile (USE_MODULES): Remove. Update all users.
(OBJ_DIR): Define it here.
* src/*/module.mk: Change
make_module_list: foo
foo: ...
to
FTMODULE_H_COMMANDS += FOO
define FOO
...
endef
in all files. `FTMODULE_H_COMMANDS' is used in `FTMODULE_H_CREATE'.
* src/base/rules.mk (BASE_EXT_SRC): Use BASE_EXTENSIONS.
* builds/unix/detect.mk (setup): Always execute `configure' script.
(have_mk): Rename to...
(have_Makefile): This.
Don't use `strip' function.
* builds/unix/unix.mk: Include `install.mk' only if BUILD_PROJECT is
defined.
(have_mk): Don't use `strip' function.
Test for unix-def.mk in OBJ_DIR, not BUILD_DIR (and invert the test
accordingly).
* builds/unix/install.mk (install, uninstall): Handle `ftmodule.h'.
* builds/os2/os2-dev.mk, builds/unix/unix-dev.mk,
builds/win32/w32-bccd.mk, builds/win32/w32-dev.mk: Don't define
BUILD_DIR but DEVEL_DIR for development header files.
* builds/ansi/ansi-def.mk (TOP_DIR, OBJ_DIR),
builds/beos/beos-def.mk (TOP_DIR, OBJ_DIR), builds/unix/unix-def.in
(TOP_DIR, OBJ_DIR): Removed. Defined elsewhere.
* builds/dos/dos-def.mk (OBJ_DIR), builds/os2/os2-def.mk (OBJ_DIR),
builds/win32/win32-def.mk (OBJ_DIR): Removed. Defined elsewhere.
* builds/unix/unixddef.mk: Don't define BUILD_DIR but DEVEL_DIR for
development header files.
Don't define PLATFORM.
* configure: Copy `modules.cfg' to builddir if builddir != srcdir.
Update snippet taken from autoconf's m4sh.m4 to current CVS version.
Be more verbose.
* include/freetype/config/ftmodule.h: Add comments -- this file is
no longer used if FreeType is built with GNU make.
* docs/CHANGES, docs/CUSTOMIZE, docs/INSTALL, docs/INSTALL.ANY,
docs/INSTALL.GNU, docs/INSTALL.UNX: Document new build mechanism.
Other minor updates.
* modules.txt: Removed. Contents included in `modules.cfg'.
* include/freetype/internal/ftmemory.h (FT_QAlloc_Debug,
FT_Free_Debug) [FT_STRICT_ALIASING]: Fix typos.
* src/base/ftdbgmem.c (FT_Alloc_Debug, FT_Realloc_Debug,
FT_QAlloc_Debug, FT_QRealloc_Debug, FT_Free_Debug)
[FT_STRICT_ALIASING]: Implement.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
(PCF_Glyph_Load), src/winfonts/winfnt.c (FNT_Load_Glyph): Don't set
the linear advance fields as they are only for the outline glyphs.
* include/freetype/freetype.h: Documentation updates/clarificatoins.
The meaning of FT_LOAD_FORCE_AUTOHINT is changed so that no real
change need be made to the code.
* src/base/ftobjs.c (FT_Load_Glyph): Resolve flag dependencies and
decide whether to use the auto-hinter according to documentation.
There should to be no real difference.
Some checks (e.g., is text height positve?) after the glyph is loaded.
(FT_Select_Size, FT_Request_Size): Scales are set to wrong values.
Be careful that scales won't be negative.
Werner Lemberg