Patch suggested by Miles.Lau <sunliang_liu@foxitsoftware.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Emit tracing
message for unknown operators and continue instead of exiting with a
syntax error.
We simply ignore such instructions. This is invalid, but it doesn't
harm; and indeed, there exist such subsetted fonts in PDFs.
Reported by Albert Astals Cid <aacid@kde.org>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
[cff_op_hlineto]: Ignore instruction if there aren't any arguments
on the stack.
Problem reported by Tobias Wolf <towolf@gmail.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: Sigh. I'm apparently too silly to fix this
correctly in less than three tries.
Problem reported by malc <av1474@comtv.ru>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: It is possible that there is just a single byte
after the `hintmask' or `cntrmask', e.g., a `return' instruction.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: Ensure that we don't exceed `limit' while parsing
the bit masks of the `hintmask' and `cntrmask' operators.
We do this by avoiding memory allocation and file I/O. This is
Savannah patch #7104.
* src/cff/cfftypes.h: Include PS cmaps service and
FT_INTERNAL_POSTSCRIPT_HINTS_H.
(CFF_SubFontRec): Remove `num_local_subrs'.
(CFF_FontRec): Add `num_strings', `strings', and `string_pool'
fields.
Remove `string_index' and `num_global_subrs' fields.
Use real types instead of `void' for `pshinter' and `psnames' fields.
* src/cff/cffload.c: Don't include PS cmaps service.
(cff_index_get_pointers): Add `pool' parameter which allows to
insert an extra NUL character for each String INDEX entry.
(cff_index_get_name): Make it a local function.
(cff_index_get_string): New function.
(cff_subfont_load): Updated.
(cff_font_load): Initialize `num_strings', `strings', and
`string_pool' fields in the `CFF_FontRec' structure.
(cff_index_get_sid_string): Use `cff_index_get_string' instead of
`cff_index_get_name'.
(cff_font_done): Updated.
* src/cff/cffload.h: Don't include PS cmaps service.
(cff_index_get_string): Added.
(cff_index_get_sid_string): Updated.
* src/cff/cffobjs.c: Don't include PS cmaps service and
FT_INTERNAL_POSTSCRIPT_HINTS_H.
(cff_size_get_globals_funcs, cff_slot_init): Updated.
(cff_face_init): Follow `cff_index_get_name',
`cff_index_get_string', and `cff_index_get_sid_string' changes.
* src/cff/cffcmap.c (cff_sid_free_glyph_name): Removed.
(cff_sid_to_glyph_name): Use `cff_index_get_cid_string'.
(cff_cmap_unicode_init): Updated.
* src/cff/cffdrivr.c: Don't include PS cmap service.
(cff_get_glyph_name): Avoid unnecessary lookup for POSTSCRIPT_CMAPS
service.
(cff_get_glyph_name, cff_ps_get_font_info, cff_get_ros): Follow API
`cff_index_get_sid_string' change.
(cff_get_name_index): Use `cff_index_get_string' instead of
`cff_index_get_name'.
* src/cff/cffgload.c: Don't include FT_INTERNAL_POSTSCRIPT_HINTS_H.
(cff_decoder_init, cff_decoder_prepare): Updated.
Since we consider `sbw' for the horizontal direction only, we still have
to synthesize vertical metrics if the user wants to use the vertical
writing direction.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph):
Synthesize vertical metrics (only) if FT_LOAD_VERTICAL_LAYOUT is
set.
After long discussion, we now consider the character width vector
(wx,wy) returned by the `sbw' Type 1 operator as being part of *one*
direction only. For example, if you are using the horizontal
writing direction, you get the horizontal and vertical components of
the advance width for this direction. Note that OpenType and CFF fonts
don't have such a vertical component; instead, the GPOS table can be
used to generate two-dimensional advance widths (but this isn't
handled by FreeType).
* include/freetype/ftincrem.h (FT_Incremental_MetricsRec): Add
`advance_v' field to hold the vertical component of the advance
value.
* src/truetype/ttgload.c (tt_get_metrics), src/cff/cffgload.c
(cff_slot_load), src/type1/t1gload.c
(T1_Parse_Glyph_And_Get_Char_String), src/cid/cidgload.c
(cid_load_glyph): Use it.
* src/cff/cffgload.c (CFF_Operator, cff_argument_counts): Handle
`seac', `sbw', and `setcurrentpoint' opcodes.
(cff_compute_bias): Add parameter to indicate the charstring type.
Update all callers.
(cff_operator_seac): Add parameter for side bearing.
(cff_decoder_parse_charstrings): Updated for more Type1 support.
* src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_get,
cff_op_put>: Appendix B of Adobe Technote #5177 limits the number of
elements for the `get' and `put' operators to 32.
* src/cff/cffgload.h (CFF_MAX_TRANS_ELEMENTS): Define.
(CFF_Decoder): Use it for `buildchar' and remove `len_buildchar'.
Problem and solution reported by Ning Dong <flintning@163.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_dup>:
Increase `args' by 2, not 1.
The calculation of `vertBearingX' is not defined in the OTF font
spec so FreeType does a `best effort' attempt. However, this value
is defined in the PDF and PostScript specs, and that algorithm is
better than the one FreeType currently uses:
FreeType: Use the middle of the bounding box as the X coordinate
of the vertical origin.
Adobe PDF spec: Use the middle of the horizontal advance vector as
the X coordinate of the vertical origin.
FreeType's algorithm goes wrong if you have a really small glyph
(like the full-width, circle-like dot at the end of the sentence, as
used in CJK scripts) with large bearings. With the FreeType
algorithm this dot gets centered on the baseline; with the PDF
algorithm it gets the correct location (in the top right). Note
that this is a serious issue, it's like printing the dot at the end
of a Roman sentence at the center of the textline instead of on the
baseline like it should. So i believe the PDF spec's algorithm
should be used in FreeType as well.
The `vertBearingY' value for such small glyphs is also very strange
if no `vmtx' information is present, since the height of the bbox is
not representable for the height of the glyph visually (the
whitespace up to the baseline is part of the glyph). The fix also
includes some code for a better estimate of `vertBearingY'.
* src/base/ftobjs.c (ft_synthesize_vertical_metrics): `vertBearingX'
is now calculated as described by the Adobe PDF Spec. Estimate for
`vertBearingY' now works better for small glyphs completely above or
below the baseline into account.
* src/cff/cffgload.c (cff_slot_load): `vertBearingX' is now
calculated as described by the Adobe PDF Spec. Vertical metrics
information was always ignored when FT_CONFIG_OPTION_OLD_INTERNALS
was not defined.
* src/truetype/ttgload.c (compute_glyph_metrics): `vertBearingX' is
now calculated as described by the Adobe PDF Spec.
Bug reported by Ivan Nincic <inincic@pdftron.com>.
* src/cff/cffgload.c (cff_slot_load): Thinko: Check `xx' element of
`font_matrix' also.
* docs/CHANGES: Updated.
include/freetype/config/ftconfig.h, builds/unix/ftconfig.in: Minor
beautifying.
* include/freetype/ftadvanc.h, include/freetype/ftgasp.h,
include/freetype/ftlcdfil.h: Protect against FreeType 1.
Some other minor fixes.
* devel/ftoption.h: Synchronize with
include/freetype/config/ftoption.h.
Formatting, documentation improvements.
include/freetype/config/ftheader.h, include/freetype/freetype.h,
src/base/Jamfile, src/base/rules.mk, src/cff/cffdrivr.c,
src/cff/cffgload.c, src/cff/cffgload.h, src/truetype/ttdriver.c,
src/truetype/ttgload.h, src/truetype/ttgload.c, src/type1/t1driver.c,
src/type1/t1gload.h, src/type1/t1gload.c:
Add a new header named FT_ADVANCES_H declaring some new APIs
to extract the advances of one or more glyphs without necessarily
loading their outlines. Also provide 'fast loaders' for the
TrueType, Type1 and CFF font drivers (more to come later)
* autogen.sh: add checks for minimum version of the 'autotools'
stuff.
assume that the first argument on the stack is the bottom-most
element. Two reasons:
o According to people from Adobe it is missing in the Type 2
specification that pushing of additional, superfluous arguments
on the stack is prohibited.
o Acroread in general handles fonts differently, namely by popping
the number of arguments needed for a particular operand (as a PS
interpreter would do). In case of buggy fonts this causes a
different interpretation which of the elements on the stack are
superfluous and which not.
Since there are CFF subfonts (embedded in PDFs) which rely on
Acroread's behaviour, FreeType now does the same.
* include/freetype/internal/ftcalc.h, src/base/ftcalc.c
(FT_Matrix_Multiply_Scaled, FT_Vector_Transform_Scaled): New
functions.
* src/cff/cffobjs.h (CFF_Internal): New struct. It is used to
provide global hinting data for both the top-font and all subfonts
(with proper scaling).
* src/cff/cffobjs.c (cff_make_private_dict): New function, using
code from `cff_size_init'.
(cff_size_init, cff_size_done, cff_size_select, cff_size_request):
Use CFF_Internal and handle subfonts.
(cff_face_init): Handle top-dict and subfont matrices correctly;
apply some heuristic in case of unlikely matrix concatenation
results. This has been discussed with people from Adobe (thanks
goes mainly to David Lemon) who confirm that the CFF specs are fuzzy
and not correct.
* src/cff/cffgload.h (cff_decoder_prepare): Add `size' argument.
* src/cff/cffgload.c (cff_builder_init): Updated.
(cff_decoder_prepare): Handle hints globals for subfonts.
Update all callers.
(cff_slot_load): Handling scaling of subfonts properly.
* src/cff/cffparse.c (cff_parse_fixed_dynamic): New function.
(cff_parse_font_matrix): Use it.
* src/cff/cfftypes.h (CFF_FontDictRec): Make `units_per_em'
FT_ULong.
* docs/CHANGES: Document it.
and `scale_y' as obsolete since they aren't used.
* src/psaux/psobjs.c (t1_builder_init): Updated.
* src/cff/cffgload.h (CFF_Builder): Mark `scale_x' and `scale_y' as
obsolete since they aren't used.
* src/cff/cffgload.c (cff_builder_init): Updated.
expanded). This is needed for options like
--includedir='${prefix}/include'.
* builds/unix/detect.mk, configure: Prevent argument expansion in
call to the (real) `configure' script.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation if
TT_USE_BYTECODE_INTERPRETER isn't defined.
There exist CFFs which contain opcodes for the Type 1 operators
`hsbw' and `closepath' which are both invalid in Type 2 charstrings.
However, it doesn't harm to support them.
* src/cff/cffgload.c (CFF_Operator): Add `cff_op_hsbw' and
`cff_op_closepath.'
(cff_argument_counts): Ditto.
(cff_decoder_parse_charstrings): Handle Type 1 opcodes 9 (closepath)
and 13 (hsbw) which are invalid in Type 2 charstrings.
Werner Lemberg