It turned out that we incorrectly round CVT and glyph point deltas
before accumulation, leading to severe positioning errors if there
are many delta values to sum up.
Problem reported by Akiem Helmling <akiem@underware.nl> and analyzed
by Behdad.
* src/truetype/ttgxvar.c (ft_var_readpackeddelta): Return deltas in
16.16 format.
(tt_face_var_cvt): Collect deltas in `cvt_deltas', which is a 16.16
format array, and add the accumulated values to the CVT at the end
of the function.
(TT_Vary_Apply_Glyph_Deltas): Store data in `points_org' and
`points_out' in 16.16 format.
Collect deltas in `point_deltas_x' and `point_deltas_y', which are
16.16 format arrays, and add the accumulated values to the glyph
coordinates at the end of the function.
* src/base/ftcalc.c (FT_Matrix_Check): New base function to properly
reject degenerate font matrices.
* include/freetype/internal/ftcalc.h: Updated.
* src/cff/cffparse.c (cff_parse_font_matrix), src/cid/cidload.c
(cid_parse_font_matrix), src/type1/t1load.c (t1_parse_font_matrix),
src/type42/t42parse.c (t42_parse_font_matrix): Use
`FT_Matrix_Check'.
Reported by Alexei.
* src/sfnt/ttcolr.c (tt_face_get_colr_layer): Return immediately if
`colr' is NULL.
* src/sfnt/ttcpal.c (tt_face_palette_set): Return immediately, if
`cpal' is NULL.
This function facilitates access to full capabilities of FreeType
rendering engine for custom glyphs. This can be quite useful for
consistent rendering of mathematical and chemical formulas, e.g.
https://bugs.chromium.org/p/chromium/issues/detail?id=757078
* include/freetype/ftglyph.h, src/base/ftglyph.c (FT_New_Glyph): New
function.
bdflib.c:1562 could be reached with `font->glyphs_used == 0'. That
caused an underflow of the unsigned value which results in undefined
behaviour.
* src/bdf/bdflib.c (src/bdf/bdflib.c): Bail out earlier than before
if the `ENCODING' keyword cannot be found.
Still missing: Support for negative bitmap pitch and subpixel offset
of source bitmap.
* include/freetype/ftbitmap.h, src/base/ftbitmap.c
(FT_Bitmap_Blend): New function.
This solution doesn't store any data in an `FT_GlyphSlot' object.
* include/freetype/freetype.h (FT_LayerIterator): New structure.
(FT_Get_Color_Glyph_Layer): New function.
* include/freetype/internal/sfnt.h (TT_Get_Colr_Layer_Func): New
function type.
(SFNT_Interface, FT_DEFINE_SFNT_INTERFACE): Add it.
* src/base/ftobjs.c (FT_Get_Color_Glyph_Layer): Implement it.
* src/sfnt/ttcolr.c (tt_face_get_colr_layer): New function.
* src/sfnt/ttcolr.h: Updated.
* src/sfnt/sfdriver.c (sfnt_interface): Updated.
* src/sfnt/sfdriver.c: Include `ttcpal.h'.
* src/sfnt/sfnt.c: Include `ttcpal.c'.
* src/sfnt/ttcolr.c, src/sfnt/ttcolr.h: Move CPAL stuff to ...
* src/sfnt/ttcpal.c, src/sfnt/ttcpal.c: ... these new files.
* src/sfnt/Jamfile (_sources), src/sfnt/rules.mk (SFNT_DRV_SRC):
Updated.
* include/freetype/internal/fttrace.h: Add support for `colr' and
`cpal'.
Sort entries.
* src/sfnt/ttcolr.c (tt_face_find_color): Removed.
(tt_face_colr_blend_layer): Use `face->palette' instead of calling
`tt_face_find_color'.
Use and set text foreground color.
* src/sfnt/ttcolr.c (tt_face_palette_set): New function.
(tt_face_load_colr): Allocate `face->palette' and call
`tt_face_palette_set'.
Adjust return error code in case of error.
* src/sfnt/ttcolr.h: Updated.
* include/freetype/internal/sfnt.h (TT_Set_Palette_Func): New
function type.
(SFNT_Interface, FT_DEFINE_SFNT_INTERFACE): Add it.
* src/sfnt/sfdriver.c (sfnt_interface), src/sfnt/sfobjs.c
(sfnt_done_face): Updated.
* src/raster/ftraster.c (black_TWorker, SCALED, Set_High_Precision):
Clean up after 5-level gray removal (8dc8635874).
(Vertical_Sweep_Span): Be brief.
This might be needed to build FreeType for the iOS simulator. See
https://savannah.nongnu.org/bugs/index.php?54048. Patch contributed
by Steve Robinson.
* CMakeLists.txt: Accept IOS_PLATFORM=SIMULATOR64
* include/freetype/internal.tttypes.h: Include FT_COLOR_H.
(TT_FaceRec): Add `palette' field.
* src/sfnt/ttcolr.c: Include FT_COLOR_H.
(Cpal): Remove all data covered by the new `palette' field in
`TT_FaceRec'.
(tt_face_load_colr): Updated.
Read `CPAL' version 1 data.
(tt_face_load_colr_layers, tt_face_find_color): Updated.
* src/sfnt/sfobjs.c (sfnt_done_face): Free glyph color palette data.
This introduces `FT_Library_SetLcdGeometry' for setting up arbitrary
LCD subpixel geometry including non-striped patterns.
* src/base/ftlcdfil.c (FT_Library_SetLcdGeometry): New function.
* include/freetype/ftlcdfil.h: Document it.
* include/freetype/freetype.h: Minor.
* include/freetype/ftchapters.h: Minor.
While going to implement it I noticed that I need access to most of
the `CPAL' elements; I thus plan to add a `cpal' field to
`TT_FaceRec', which makes most of the previously suggested API
functions obsolete because the fields will be directly accessable.
* src/raster/ftraster.c [STANDALONE] (FT_Outline_Get_CBox): Add
function.
[!STANDALONE]: Include FT_OUTLINE_H.
(ft_black_render): Compute CBox and reject glyphs larger than
0xFFFF x 0xFFFF.
* src/smooth/ftgrays.c (gray_raster_render): Reject glyphs larger
than 0xFFFF x 0xFFFF.
The robust rendering of estra large glyphs came with unbearable cost.
The old way of bisecting should fail but fail faster.
* src/smooth/ftgrays.c (gray_convert_glyph): Switch back to bisecting
in y-direction.
The declaration of `edge2' can be reached with `edge1 == NULL' and
`axis->edges == 0' which results in undefined behaviour.
* src/autofit/afloader.c (af_loader_load_glyph): Initialise `edge2'
after checking `axis->num_edges > 1'. `edge1 != NULL' can be assumed.
* include/freetype/config/ftheader.h (FT_COLOR_H): New macro.
* include/freetype/internal/ftobjs.h (FT_Colr_Internal): Change
type of `load_flags' to `FT_Int32'.
* include/freetype/internal/sfnt.h (TT_Load_Colr_Layer_Func): Change
type of `idx' to `FT_UInt'.
(TT_Blend_Colr_Func): Change type of `color_index' to `FT_UInt'.
* src/base/ftobjs.c (FT_Render_Glyph_Internal): Change type of
`load_flags' to `FT_Int32'.
* src/sfnt/ttcolr.c (find_base_glyph_record,
tt_face_load_colr_layers): Change type of `glyph_id' to `FT_UInt'.
(tt_face_find_color, tt_face_colr_blend_layer): Change type of
`color_index' to `FT_UInt'.
Fix signedness and type issues.
* src/sfnt/ttcolr.h: Updated.
This platform uses backslashes for paths, which docmaker didn't
understand correctly.
* src/tools/docmaker/tohtml.py (HtmlFormatter::blockEnter): Use
`os.path.normpath' to normalize the path for the platform being
used.
This generalizes magic outline shifts that make Harmony LCD
rendering work in terms of precise two-dimensional RGB subpixel
positions. These coordinates are now set in time of the `smooth'
module initialization and later used to shift a glyph outline for
rendering. FT_RENDER_MODE_LCD and FT_RENDER_MODE_LCD_V use the same
coordinates. The letter, however, rotates them before using.
The LCD bitmap padding is also calculated using these coordinates.
* include/freetype/internal/ftobjs.h (FT_LibraryRec): New array field
`lcd_geometry'.
* src/base/ftlcdfil.c (ft_lcd_padding): Reworked.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): Updated accordingly.
* src/smooth/ftsmooth.c [!FT_CONFIG_OPTION_SUBPIXEL_RENDERING]
(ft_smooth_init): Initialize `lcd_geometry'.
(ft_smooth_render_generic): Formalize outline shifts.
* include/freetype/internal/ftobjs.h (FT_Glyph_LayerRec): Move this
structure to...
* include/freetype/freetype.h (FT_Glyph_LayerRec): ... this
header file.
(FT_Glyph_Layer): New typedef.
Update code to use it where appropriate.
* src/base/ftobjs.c (FT_Get_GlyphLayers): New function.
It is rather fundamental to set monochrome bitmap based on rounded
CBox because the b/w rasterizer turns on pixels when their centers are
inside the glyph outline. The dropout control is unpredictable and can
distort narrow glyphs if the bitmap is too wide.
Reported by Chris Liddell.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): If BBox boundaries
are too close, adjust them before rounding.
* src/truetype/ttgload.c (TT_Load_Glyph): Free old `layers' array
before reassigning allocated memory.
Only allocate `color_layers' if we don't have one already.
* src/sfnt/ttcolr.c (tt_face_load_colr_layers): Return FT_Err_Ok if
current glyph is not a `COLR' base glyph.
* src/truetype/ttgload.c (TT_Load_Glyph): Don't allocate
`color_layers' if there are no color layers.
This commit enables OpenType's COLR/CPAL table handling; a typical
application are color emojis that can be scaled to any size.
If the color palette does not exist or is invalid, the rendering
step rasterizes the outline instead. The current implementation
assumes that the foreground is black.
Enable this by defining option TT_CONFIG_OPTION_COLOR_LAYERS.
There are still some issues with metrics; additionally, an API to
fetch color layers is missing.
* devel/ftoption.h, include/freetype/config/ftoption.h
(TT_CONFIG_OPTION_COLOR_LAYERS): New macro.
* include/freetype/internal/ftobjs.h (FT_Glyph_LayerRec,
FT_Colr_InternalRec): New structures.
(FT_Slot_InternalRec): Add `color_layers' field.
* include/freetype/internal/sfnt.h (TT_Load_Colr_Layer_Func,
TT_Blend_Colr_Func): New function types.
(SFNT_Interface): Add `load_colr', `free_colr', `load_colr_layer',
and `colr_blend' fields.
* include/freetype/internal/tttypes.h (TT_FaceRec): Add
`colr_and_cpal' field.
* include/freetype/internal/tttags. (TTAG_COLR, TTAG_CPAL): New
macros.
* src/sfnt/ttcolr.c, src/sfnt/ttcolr.h: New files.
* src/base/ftobjs.c (ft_glyphslot_done, FT_Render_Glyph_Internal):
Handle glyph color layers.
* src/sfnt/Jamfile (_sources), src/sfnt/rules.mk (SFNT_DRV_SRC): Add
`ttcolr.c'.
* src/sfnt/sfdriver.c: Include `ttcolr.h'.
(PUT_COLOR_LAYERS): New macro.
Update call to `FT_DEFINE_SFNT_INTERFACE'.
* src/sfnt/sfnt.c: Include `ttcolr.c'.
* src/sfnt/sfobjs.c (sfnt_load_face): Load `COLR' and `CPAL' tables.
(sfnt_done_face): Updated.
* src/truetype/ttgload.c (TT_Load_Glyph): Handle color layers.
AC_COMPILE_IFELSE only tries to compile a `*.c' to a `*.o'. The
Solaris Studio 12.1 through 12.5 compilers see the
`-fvisibility=hidden' flag, but ignore it with a warning of:
cc: Warning: Option -fvisibility=hidden passed to ld,
if ld is invoked, ignored otherwise
AC_LINK_IFELSE does the compile and then tries to link the result,
at which point the Solaris linker will issue an error:
ld: fatal: option '-fvisibility=hidden' is incompatible with
building a dynamic executable
If we don't use AC_LINK_IFELSE to catch the error, then configure
will fail further tests which attempt to link, such as those testing
dependencies like `libbz2'.
Also, don't try adding `-fvisibility' if we have already added
`-xldscope', just use one of them, since Sun Studio 12 and earlier
compilers only issue a warning, and don't try passing through to the
linker to generate an error, so AC_LINK_IFELSE doesn't catch them.
Tested on Solaris 11.4 beta with compiler versions:
Sun Studio 8 (Sun C 5.5)
Sun Studio 10 (Sun C 5.7)
Sun Studio 11 (Sun C 5.8)
Sun Studio 12 (Sun C 5.9)
Sun Studio 12.1 (Sun C 5.10)
Oracle Solaris Studio 12.2 (Sun C 5.11)
Oracle Solaris Studio 12.3 (Sun C 5.12)
Oracle Solaris Studio 12.4 (Sun C 5.13)
Oracle Developer Studio 12.5 (Sun C 5.14)
Oracle Developer Studio 12.6 (Sun C 5.15)
gcc 5.5.0
gcc 7.3.0
and verified the libfreetype.so.6 generated by each of those
compilers exported the same set of symbols.
* builds/unix/configure.raw: Implement it.
Problem reported by Shailesh Mistry <shailesh.mistry@hotmail.co.uk>.
* src/autofit/afshaper.c (af_shaper_buf_create,
af_shaper_buf_destroy) [!FT_CONFIG_OPTION_USE_HARFBUZZ]: Don't
allocate and free a four-byte buffer. Instead, make those functions
no-ops; the calling functions will provide a pointer to a buffer
instead.
* src/autofit/afcjk.c (af_cjk_metrics_init_widths,
af_cjk_metrics_init_blues, af_cjk_metrics_check_digits),
src/autofit/aflatin.c (af_latin_metrics_init_widths,
af_latin_metrics_init_blues, af_latin_metrics_check_digits)
[!FT_CONFIG_OPTION_USE_HARFBUZZ]: Use pointer to local variable for
`shaper_buf'.
* CMakeLists.txt: Test for CMake build directory being diffent from
source directory. Provide other parts of the build system access the
full include directory.
This is due to calling the configure script via `make' (within the
top-level `configure' wrapper script). The same can happen for all
other secondary make targets that are used to only modify the
primary one, e.g., `make setup devel'.
* builds/dos/detect.mk (emx, turboc, watcom, borlandc, borlandc16),
builds/os2/detect (visualage, watcom, borlandc, devel),
builds/unix/detect.mk (devel, lcc, unix), builds/windows/detect.mk
(visualc, watcom, visualage, lcc, mingw32, bcc32, devel-bcc,
devel-gcc): Use no-op recipe.
Reported by Kiyoshi Kanazawa:
https://lists.gnu.org/archive/html/freetype-devel/2018-05/msg00008.html
Thanks to the suggestions by Alexei and Alan Coopersmith.
* builds/unix/configure.raw: Check if "-xldscope=hidden" is
accepted, and if so, it is added to CFLAGS. This is the option
making Sun / Oracle C compilers hide the symbols from global
scope.
* include/freetype/config/ftconfig.h: Use "__global" prefix
for FT_EXPORT() macro, if SunPro C is newer than Sun ONE
Studio 8 (2003).
* builds/unix/ftconfig.in: Ditto.
* builds/vms/ftconfig.h: Ditto.
*/* [FT_CONFIG_OPTION_PIC]: Remove all code guarded by this
preprocessor symbol.
*/*: Replace `XXX_GET' macros (which could be either a function in
PIC mode or an array in non-PIC mode) with `xxx' arrays.
* include/freetype/internal/ftpic.h, src/autofit/afpic.c,
src/autofit/afpic.h, src/base/basepic.c, src/base/basepic.h,
src/base/ftpic.c, src/cff/cffpic.c, src/cff/cffpic.h,
src/pshinter/pshpic.c, src/pshinter/pshpic.h, src/psnames/pspic.c,
src/psnames/pspic.h, src/raster/rastpic.c, src/raster/rastpic.h,
src/sfnt/sfntpic.c, src/sfnt/sfntpic.h, src/smooth/ftspic.c,
src/smooth/ftspic.h, src/truetype/ttpic.c, src/truetype/ttpic.h:
Removed.
Bug introduced after release 2.8.
* src/base/ftbitmap.c (ft_bitmap_assure_buffer): We use
`FT_QALLOC_MULT', which doesn't zero out the buffer. Adjust the
bitmap copying code to take care of this fact.
This will be part of the forthcoming Unicode 11.0.
* src/autofit/afblue.dat: Add blue zone data for Mtavruli.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Mtavruli standard character.
But no support new scripts (volunteers welcomed).
* src/autofit/afranges.c (af_arab_nonbase_uniranges,
af_beng_nonbase_uniranges, af_cakm_nonbase_uniranges,
af_deva_nonbase_uniranges, af_geor_uniranges,
af_gujr_nonbase_uniranges, af_mlym_nonbase_uniranges,
af_nkoo_nonbase_uniranges, af_telu_nonbase_uniranges,
af_hani_uniranges): Add new data.
Jeff Carey