Since the initial commit (ebe85f59) the value of FT_TRIG_SCALE has
always been slightly less than the correct value, which has been
given in the comment as a hexadecimal. As a result, vector lengths
were underestimated and rotated vectors were shortened.
The dot product between freeVector and projVector or cosine of
the angle between these FT_F2Dot14 unit vectors used to be scaled up
by 4 and routinely occupied 32 bits in an FT_Long field F_dot_P.
This patch scales the value down by 2^14 instead, which simplifies
its use throughout the bytecode interpreter.
This does not lead to the loss of precision because the lower bits
are unreliable anyway. Consider two unit vectors (1,0) and (.6,.8)
for which the true value of F_dot_P is .6 * 0x40000000 = 0x26666666.
These vectors are stored as (0x4000,0) and (0x2666,0x3333) after
rounding and F_dot_P is assigned 0x26660000. The lower bits were
already lost while rounding the unit vector components.
Besides code simplification, this change can lead to better
performance when FT_MulDiv with the scaled-down F_dot_P is less
likely to use the costly 64-bit path. We are not changing the type
of F_dot_P to FT_F2Dot14 at this point.
* src/truetype/ttinterp.c (Compute_Funcs): Scale F_dot_P down by 14
bits and modify its use accordingly.
(Direct_Move, Direct_Move_Orig, Compute_Point_Displacement): Modify
the use of F_dot_P field.
* src/truetype/ttobjs.c (tt_size_run_fpgm): Change arbitrary
assignment of F_dot_P to its theoretical maximum in case we decide
to scale back its type later.
* src/truetype/ttinterp.c (TT_DivFix14): New macro.
(Normalize): Use it here.
(Current_Ratio): Use TT_MulFix14 instead of FT_MulDiv.
(Ins_SHPIX): Cancel out two TT_MulFix14 calls.
This is Savannah bug #37856.
* src/pshinter/pshglob.c (psh_calc_max_height): New function.
(psh_globals_new): Use it to limit BlueScale value to
`1 / max_of_blue_zone_heights'.
* src/cff/cffload.c (cff_font_load): Separate subfont and face
index handling to load both pure CFFs with multiple subfonts and
OTCs (with multiple faces where each face holds exactly one
subfont).
* src/cff/cffobjs.c (cff_face_init): Updated.
* src/base/ftoutln.c (FT_Outline_EmboldenXY): Replace sequential
calls to FT_MulFix and FT_DivFix with FT_MulDiv.
Mention that bisectors are used to figure out the shift direction.
* src/psaux/psconv.c (PS_Conv_Strtol): Always parse complete number,
even in case of overflow.
(PS_Conv_ToInt): Only increase cursor if parsing was successful.
(PS_Conv_ToFixed): Ditto.
Trace underflow and data error.
Such fonts only have a `cmap' and a `CFF' table.
* src/sfnt/ttload.c (tt_face_load_font_dir): Don't call
`check_table_dir' if font signature is `OTTO'.
* src/psaux/psconv.c: Include FT_INTERNAL_DEBUG_H.
(FT_COMPONENT): Define.
(PS_Conv_Strtol): Return FT_Long.
Handle bad data and overflow.
Emit some tracing messages in case of error.
(PS_Conv_ToInt): Return FT_Long.
(PS_Conv_ToFixed): Updated.
* src/psaux/psconv.h: Updated.
* include/freetype/internal/fttrace.h: Add `psconv'.
* src/autofit/aflatin.c, src/autofit/aflatin2.c: Include
`afglobal.h'.
* src/autofit/afloader.c: Fix order of header files.
* src/autofit/afmodule.c: Include `afglobal.h' and `aferrors.h'.
* src/cff/cffparse.c (cff_parse_integer): Emit tracing message in
case of error.
(cff_parse_real): Handle and trace overflow, underflow, and bad data
consistently.
(do_fixed): New helper function, handling and tracing overflow.
(cff_parse_fixed, cff_parse_fixed_scaled): Use `do_fixed'.
* src/truetype/ttinterp.c (Ins_ISECT): Use angle between vectors to
avoid grazing intersections. The previous threshold was too coarse,
incorrectly rejecting short but valid vectors.
* src/autofit/aftypes.h (AF_SCRIPT):
s/AF_SCRIPT_NONE/AF_SCRIPT_DUMMY/. We already use `AF_SCRIPT_NONE'
as a bit mask.
* src/autofit/afdummy.c: Updated.
This is an improved version of a similar fix contained in the
so-called `Infinality patch', taken from
http://www.infinality.net/fedora/linux/zips/freetype-infinality-2.4.10-20120616_01-x86_64.tar.bz2
which addresses various enhancements of the auto-hinter. Without
properties to control a module's metadata it wasn't possible to
adapt the patches because everything was originally controlled by
environment variables which I consider not suitable in general.
A patch to control `increase_x_height' follows.
* src/autofit/afglobal.h (AF_PROP_INCREASE_X_HEIGHT_MIN,
AF_PROP_INCREASE_X_HEIGHT_MAX): New macros.
(AF_FaceGlobalsRec): Add `increase_x_height' member.
* src/autofit/afglobal.c (af_face_globals_new): Initialize it.
* src/autofit/aflatin.c (af_latin_metrics_scale_dim),
* src/autofit/aflatin2.c (af_latin2_metrics_scale_dim): Implement
handling of `increase_x_height'.
The auto-hinter's latin module only handles latin ligatures in the
`Alphabetical Presentation Forms' block.
* src/autofit/aflatin.c (af_latin_uniranges): Fix it.
We want to access the (not yet existing) module's global data later
on.
* src/autofit/afloader.c: Include `afmodule.h'.
(af_loader_init, af_loader_reset, af_loader_done,
af_loader_load_glyph): Change accordingly.
* src/autofit/afmodule.c (AF_ModuleRec): Move to `afmodule.h'.
Updated.
* src/autofit/afmodule.h: Include `afloader.h'.
(AF_ModuleRec): Define here.
* src/autofit/afloader.h (AF_Module): Define here.
Updated.
No properties are added yet.
* src/autofit/afmodule.c: Include FT_SERVICE_PROPERTIES_H.
(af_property_set, af_property_get): New dummy functions.
(af_service_properties, af_services, af_get_interface): Provide
service setup.
(autofit_moduleclass): Add service interface.
* src/autofit/afpic.c: Add necessary forward declarations.
(autofit_module_class_pic_init): Add code for service addition.
(autofit_module_pic_free): Add code for service removal.
* src/autofit/afpic.h (AF_SERVICES_GET, AF_SERVICE_PROPERTIES_GET):
New macros which provide necessary syntactical sugar for PIC
support.
* include/freetype/fterrdef.h (FT_Err_Missing_Property): New error
code.
* include/freetype/ftmodapi.h (FT_Property_Set, FT_Property_Get):
New API.
* include/freetype/internal/services/svprop.h: New file.
* include/freetype/internal/ftserv.h (FT_SERVICE_PROPERTIES_H): New
macro.
* src/base/ftobjs.c: Include FT_SERVICE_PROPERTIES_H.
(ft_property_do, FT_Property_Set, FT_Property_Get): New functions.
Problem reported by Brad Dunzer <BDunzer@extensis.com>.
* src/autofit/aflatin.c (af_latin_metrics_init_blues): We have
a flat segment if the horizontal distance of best on-points is
larger than a given threshold.
Problem reported by Peter Breitenlohner and Akira Kakuto.
* include/freetype/config/ftstdlib.h (ft_setjmp): Updated.
* src/sfnt/ttcmap.c (tt_face_build_cmaps): Remove cast.
* src/autofit/aflatin.c (af_latin_metrics_init_blues),
src/autofit/aflatin2.c (af_latin2_metrics_init_blues): Change the
constraint for testing round vs. flat segment: Accept either a
small distance or a small angle.
* include/freetype/internal/ftcalc.h (FT_MulDiv_No_Round): Don't
enclose with `TT_USE_BYTECODE_INTERPRETER'; we now need the function
elsewhere also.
* src/autofit/afcjk.h: Use AF_CONFIG_OPTION_CJK.
* src/truetype/ttgload.c (tt_loader_init): Fix compiler warning.
* src/truetype/ttinterp.c (Ins_MSIRP): Fix compiler warning.
* src/truetype/ttinterp.h: Use
TT_CONFIG_OPTION_BYTECODE_INTERPRETER.
This is the large, famous `Infinality' patch to support ClearType
bytecode which has been available from
http://www.infinality.net/blog/ for some time, and which has been
refined over the last years. While still experimental, it is now
mature enough to be included directly into FreeType.
Most of the code is based on the ClearType whitepaper written by
Greg Hitchcock
http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx
which gives a detailed overview of the necessary changes to the
Microsoft rasterizer so that older fonts are supported. However, a
lot of details are still missing, and this patches provides a
framework to easily handle rendering issues down to the glyph level
of certain fonts.
Note that ClearType support is not completely implemented! In
particular, full support for the options `compatible_widths',
`symmetrical_smoothing, and `bgr' (via the GETINFO bytecode
instruction) is missing.
* src/truetype/ttsubpix.c: New file, providing code to handle
`tweaks', this is, rules for certain glyphs in certain fonts
(including wildcards) which need a special treatment.
* src/truetype/ttsubpix.h: New file, holding the tweaking rules.
* include/freetype/config/ftoption.h, src/devel/ftoption.h
(TT_CONFIG_OPTION_SUBPIXEL_HINTING): New macro.
* include/freetype/internal/ftobjs.h (FT_PIX_FLOOR_GRID,
FT_PIX_ROUND_GRID, FT_PIX_CEIL_GRID): New macros.
* src/truetype/truetype.c [TT_USE_BYTECODE_INTERPRETER]: Include
`ttsubpix.c'.
* src/truetype/ttgload.c: Include `ttsubpix.h'.
[All changes below are guarded by TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(tt_get_metrics): Set tweak flags.
(TT_Hint_Glyph): Call `FT_Outline_EmboldenXY' if necessary.
(TT_Process_Simple_Glyph): Compensate emboldening if necessary.
(compute_glyph_metrics): Handle `compatible widths' option.
(tt_loader_init): Handle ClearType GETINFO information bits.
* src/truetype/rules.mk (TT_DRC_SRC): Updated.
* src/truetype/ttinterp.c: Include `ttsubpix.h'.
[Where necessary, changes below are guarded by
TT_CONFIG_OPTION_SUBPIXEL_HINTING.]
(Direct_Move, Direct_Move_X): Extended.
(Round_None, Round_To_Grid, Round_To_Half_Grid, Round_Down_To_Grid,
Round_Up_To_Grid, Round_To_Double_Grid, Round_Super, Round_Super_45,
SetSuperRound): Add parameter to handle the number of grid lines per
pixel.
(SET_SuperRound, ROUND_None, CUR_Func_round): Updated.
(DO_SROUND, DOS45ROUND, DO_ODD, DO_EVEN): Updated.
(DO_ROUND, DO_NROUND): Updated.
(DO_RS): Take care of `Typeman' bytecode patterns.
(Ins_FDEF): Add some debugging code. Commented out.
(Ins_ENDF): Restore state.
(Ins_CALL, Ins_LOOPCALL): Handle inline delta functions.
(Ins_MD): Handle `Vacuform' rounds.
(Move_Zp2_Point, Ins_SHPIX, Ins_MSIRP, Ins_MDAP, Ins_MIAP,
Ins_MDRP, Ins_MIRP): Handle tweaks.
(Ins_ALIGNRP): Add tweak guard.
(Ins_IUP, Ins_DELTAP): Handle tweaks.
(Ins_GETINFO): Handle new ClearType bits.
(TT_RunIns): Handle tweaks.
* src/truetype/ttinterp.h: Updated.
(SPH_TweakRule, SPH_ScaleRule): New structures for tweaks.
(TT_ExecContextRec): Add members for subpixel hinting support.
* src/truetype/ttobjs.h (TT_DefRecord): Add `inline_delta' member.
NEC FA family dated in 1996 have different checksum.
Reported by Johnson Y. Yan <yinsen_yan@foxitsoftware.com>; see
http://lists.gnu.org/archive/html/freetype-devel/2012-06/msg00023.html
* src/truetype/ttobjs.c (tt_check_trickyness_sfnt_ids): 4 sets
of fpgm & prep table checksums for FA-Gothic, FA-Minchou,
FA-RoundedGothicM, FA-RoundedGothicB are added. The family
names in sample PDF are truncated, thus the list of the
family names in tt_check_trickyness_family() is not updated yet.
* include/freetype/ftoutln.h (FT_Outline_EmboldenXY): Define it.
* src/base/ftoutln.c (FT_Outline_EmboldenXY): Implement it, using a
simplified embolding algorithm.
(FT_Outline_Embolden): Make it a special case of
`FT_Outline_EmboldenXY'
Without this patch, only the dummy and cjk autohinter modules get
them (since they copy the whole scaler object).
* src/autofit/aflatin.c (af_latin_metrics_scale),
src/autofit/aflatin2.c (af_latin2_metrics_scale): Implement it.
Based on the patch given in the bug report.
* src/type1/t1load.c (IS_INCREMENTAL): New macro.
(read_binary_data): Add parameter `incremental'.
Update all callers using `IS_INCREMENTAL'.
This was quite a subtle bug which accidentally showed up with glyph
`afii10023' of arial.ttf (version 2.76). This glyph is a composite;
the first component, `E', has an advance width of 1366 font units,
while the advance width of the composite itself (which looks like
uppercase `E' with dieresis) is 1367 font units. I think this is
actually a bug in the font itself, because there is no reason that
this glyph has not the same width as uppercase `E' without the
dieresis. Anyway, it helped identify this problem.
Using the TrueType hinter, the correct value (1367) of `afii10023'
was returned, but the autohinter mysteriously returned 1366.
Digging in the code showed that the autohinter recursively calls
FT_Load_Glyph to load the glyph, adding the FT_LOAD_NO_SCALE load
flag. However, the `linearHoriAdvance' field is still returned as a
scaled value. To avoid scaling twice, the old code in autofit reset
`linearHoriAdvance', using the `horiAdvance' field. This seemed to
work since FT_LOAD_NO_SCALE was in use, but it failed actually,
because `horiAdvance' is defined as the distance of the first
subglyph's phantom points, which in turn are initialized using the
advance width of the first subglyph. And as the given example
shows, these widths can differ.
* src/autofit/afloader.c (af_loader_load_g): Temporarily set
FT_LOAD_LINEAR_DESIGN while calling FT_Load_Glyph to get unscaled
values for the linear advance widths.
* src/truetype/ttinterp.c (DO_SSW): SSW *does* use font units. For
verification, it took some time to find a font which actually uses
this instruction.
For some divisions, we use casts to 32bit entities. Always guard
against division by zero with these casts also.
* src/base/ftcalc.c (ft_div64by32): Remove redundant cast.
(FT_MulDiv, FT_MulDiv_No_Round): Add 32bit cast.
(FT_DivFix): Add 32bit cast (this omission triggered the bug).
* src/psaux/afmparse.c (afm_parse_track_kern): Don't inverse sign
for `min_kern'. It is indeed quite common that track kerning
*increases* spacing for very small sizes.
If in function `skip_spaces' the routine `skip_comment' comes to the
end of buffer, `cur' is still increased by one, so we need to check
for `p >= limit' and not `p == limit'.
* src/psaux/psconv.c (PS_Conv_Strtol, PS_Conv_ToFixed,
PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Fix boundary checking.
* src/truetype/ttinterp.c (Ins_MIRP): Typo, present since ages. The
code is now in sync with the other operators (e.g. MSIRP) which
modify twilight points.
* src/bdf/bdflib.c (_bdf_list_ensure): Bring code in sync with
comment before `_bdf_list_split', this is, really allocate at least
five `field' elements.
* src/bdf/bdflib.c (_bdf_parse_glyphs) <DWIDTH, BBX>: Abort if
_BDF_ENCODING isn't set. We need this because access to the `glyph'
variable might be undefined otherwise.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Use `FT_Pos'
instead of `FT_UInt' for some variables and update comparisons
accordingly. A detailed analysis can be found in the bug report.
* src/type1/t1load.c (parse_subrs): Add proper guards for `strncmp'.
* src/psaux/psobjs.c (ps_parser_skip_PS_token): Emit error message
only if cur < limit.
Jump instructions are now bound to the current function. The MS
Windows rasterizer behaves the same, as confirmed by Greg Hitchcock.
* src/truetype/ttinterp.h (TT_CallRec): Add `Cur_End' element.
* src/truetype/ttobjs.h (TT_DefRecord): Add `end' element.
* src/truetype/ttinterp.c (DO_JROT, DO_JMPR, DO_JROF): Check upper
bound of jump address.
(Ins_FDEF, Ins_CALL, Ins_LOOPCALL, Ins_UNKNOWN, TT_RunIns): Updated.
* include/freetype/internal/ftobjs.h (FT_ModuleRec, FT_LibraryRec):
Remove `generic' field since users can't access it.
* src/base/ftobjs.c (FT_Done_GlyphSlot): Call `generic.finalizer' as
advertised in the documentation of FT_Generic.
(Destroy_Module, FT_Done_Library): Updated to changes in `ftobjs.h'.
Patch submitted by anonymous reporter.
* src/gxvalid/gxvcommn.c (gxv_XStateTable_subtable_setup):
gxv_set_length_by_ulong_offset() must be called with 3, not 4,
the number of the subtables in the state tables; classTable,
stateArray, entryTable.
Based on the patch provided by Erik Dahlstrom <ed@opera.com>,
http://lists.gnu.org/archive/html/freetype-devel/2012-01/msg00010.html
Also `raccess_guess_table[]' and `raccess_rule_by_darwin_vfs()'
are renamed with `ft_' suffixes.
* src/base/ftbase.h: `raccess_rule_by_darwin_vfs()' is renamed
to `ft_raccess_rule_by_darwin_vfs()'.
* src/base/ftobjs.c: Ditto.
* src/base/ftrfork.c: Declarations of FT_RFork_Rule,
raccess_guess_rec, are moved to...
* include/freetype/internal/ftrfork.h: Here.
* include/freetype/internal/ftrfork.h:
FT_RFORK_RULE_ARRAY_{BEGIN,ENTRY,END} macros are defined
to replace raccess_guess_table[] in both of PIC and non-PIC
modes.
* src/base/ftrfork.c: raccess_guess_table[] array is rewritten
by FT_RFORK_RULE_ARRAY_{BEGIN,ENTRY,END}.
* src/base/basepic.h (BasePIC): Add `ft_raccess_guess_table'
storage. (FT_RACCESS_GUESS_TABLE_GET): New macro to retrieve
the function pointer from `ft_raccess_guess_table' storage in
`BasePIC' structure.
* src/base/ftrfork.c (FT_Raccess_Guess): Rewritten with
FT_RACCESS_GUESS_TABLE_GET.
(raccess_get_rule_type_from_rule_index): Add `library' as the
first argument to the function, to retrieve the storage of
`ft_raccess_guess_table' from it. Also `raccess_guess_table'
is replaced by FT_RACCESS_GUESS_TABLE_GET.
(ft_raccess_rule_by_darwin_vfs): Ditto.
* src/autofit/afpic.c: Include "aflatin2.h" when
FT_OPTION_AUTOFIT2 is defined, as afglobal.c does so.
Unconditionally inclusion causes declared but unimplemented
warning by GCC 4.6.
* src/cff/cffpic.c: The declarations of
FT_Init_Class_cff_cmap_encoding_class_rec() and
FT_Init_Class_cff_cmap_unicode_class_rec() are removed.
They can be obtained by the inclusion of cffcmap.h.
cffcmap.h invokes FT_DECLARE_CMAP_CLASS() and it declares
FT_Init_Class_cff_cmap_encoding_class_rec() etc in PIC mode.
Originally FT_DEFINE_{DRIVER,MODULE,RENDERER}() macros were
designed to declare xxx_pic_{free,init} by themselves.
Because these macros are used at the end of the module
interface (e.g. ttdriver.c) and the wrapper source to build
a module as a single object (e.g. truetype.c) includes
the PIC file (e.g. ttpic.c) before the module interface,
these macros are expanded AFTER xxx_pic_{free,init} body
when the modules are built as single object.
The declaration after the implementation causes the redundant
declaration warnings, so the declarations are moved to module
PIC headers (e.g. ttpic.h). Separating to other header files
are needed for multi build.
* include/freetype/internal/ftdriver.h (FT_DEFINE_DRIVER):
Remove class_##_pic_free and class_##_pic_init declarations.
* include/freetype/internal/ftobjs.h (FT_DEFINE_RENDERER,
FT_DEFINE_MODULE): Ditto.
* src/base/basepic.h: Insert a comment and fix coding style.
* src/autofit/afpic.h: Declare autofit_module_class_pic_{free,
init}.
* src/cff/cffpic.h: Declare cff_driver_class_pic_{free,init}.
* src/pshinter/pshpic.h: Declare pshinter_module_class_pic_{free,
init}.
* src/psnames/pspic.h: Declare psnames_module_class_pic_{free,
init}.
* src/raster/rastpic.h: Declare
ft_raster{1,5}_renderer_class_pic_{free,init}
* src/sfnt/sfntpic.h: Declare sfnt_module_class_pic_{free,init}.
* src/smooth/ftspic.h: Declare
ft_smooth_{,lcd_,lcdv_}renderer_class_pic_{free,init}.
* src/truetype/ttpic.h: Declare tt_driver_class_pic_{free,init}.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): `glyph' must be
set before derefering to obtain `library'. The initialization
of `clazz', `glyph', `library' and NULL pointer check are
reordered to minimize PIC conditonals.
* src/base/ftinit.c (FT_Add_Default_Modules): Under PIC
configuration, FT_DEFAULT_MODULES_GET returns
FT_Module_Class** pointer, GCC 4.6 warns that
const FT_Module_Class* const* variable is warned as
inappropriate to store it. To calm it, explicit cast is
inserted. Also `library' is checked to prevent the NULL
pointer dereference in FT_DEFAULT_MODULES_GET.
Under PIC configuration, FT_{CFF,PSCMAPS,SFNT,TT}_SERVICES_GET
take no arguments but derefer the variable named `library'
internally.
* src/cff/cffdrivr.c (cff_get_interface): Declare `library' and
set it if non-NULL driver is passed.
* src/truetype/ttdriver.c (tt_get_interface): Ditto.
* src/sfnt/sfdriver.c (sfnt_get_interface): Declare `library'
under PIC configuration, and set it if non-NULL module is given.
* src/psnames/psmodule.c (psnames_get_interface): Ditto.
error codes with per-module prefix.
* src/autofit/afpic.c: Include `aferrors.h'.
* src/cff/cffpic.c: Include `cfferrs.h'.
* src/pshinter/pshpic.c: Include `pshnterr.h'.
* src/raster/rastpic.c: Include `rasterrs.h'.
* src/sfnt/sfntpic.c: Include `sferrors.h'.
* src/smooth/ftspic.c: Include `ftsmerrs.h'.
* src/truetype/ttpic.c: Include `tterrors.h'.
Originally FT_MACINTOSH was a pure auto macro and DARWIN_NO_CARBON
was a configurable macro to disable Carbon-dependent code. Because
now configure script sets DARWIN_NO_CARBON by default and disables
Darwin & Carbon-dependent codes, these macros can be unified.
FT_MACINTOSH (undefined by default) is kept and DARWIN_NO_CARBON
(defined by default) is removed, because DARWIN_NO_CARBON violates
FT_XXX naming convention of public macros, and a macro configured by
default is not portable for the building without configure (e.g.
make devel).
* builds/unix/configure.raw: Define FT_MACINTOSH if Carbon-based
old Mac font support is requested and Carbon is available.
* builds/unix/ftconfig.in: Undefine FT_MACINTOSH when the support
for Mac OS X without Carbon (e.g. Mac OS X 10.4 for ppc64) is
requested.
* include/freetype/config/ftconfig.in: Ditto.
* builds/vms/ftconfig.h: Ditto.
* src/base/ftbase.h: Remove DARWIN_NO_CARBON.
* src/base/ftbase.c: Ditto.
* src/base/ftobjs.c: Ditto.
* src/base/ftrfork.c: Ditto.
* src/base/ftmac.c: Compile the body if FT_MACINTOSH is defined
(same with TT_USE_BYTECODE_INTERPRETER in ttinterp.c).
* builds/mac/ftmac.c: Ditto.
* builds/mac/FreeType.m68k_cfm.make.txt: Define FT_MACINTOSH.
* builds/mac/FreeType.m68k_far.make.txt: Ditto.
* builds/mac/FreeType.ppc_classic.make.txt: Ditto.
* builds/mac/FreeType.ppc_carbon.make.txt: Ditto.
* src/tools/apinames.c (names_add): Change the type of `h' from
int to unsigned int, to prevent undefined behaviour in the
overflow of signed integers (overflow of unsigned int is defined
to be wrap around). Found by clang test suggested by Sean
McBride.
ENCODING now covers the whole Unicode range.
Note, however, that this change is quite expensive since it
increases the size of three arrays by almost 400kByte in total. The
right fix is to replace the logic with something smarter.
Additionally, there exist very old BDFs for three-byte CCCII
encoding which exceeds the range of Unicode (another reason to have
a smarter logic).
* src/bdf/bdf.h (bdf_font_t): Increase size of `nmod' and `umod'
arrays.
* src/bdf/bdflib.c (bdf_parse_t): Increase size of `have' array.
Infinality