Problem reported by Behdad.
* src/cff/cffdrivr.c (cff_get_advances): Handle SFNT case
separately.
* src/cff/cffgload.c (cff_slot_load): Use advance width and side
bearing values from `hmtx' table if present.
The functions in this patch *do* return non-trivial errors that must
be taken care of.
* src/autofit/afloader.c (af_loader_load_g), src/base/ftobjs.c
(FT_Render_Glyph_Internal), src/base/ftoutln.c (FT_Outline_Render),
src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_endchar>,
src/psaux/psobjs.c (ps_parser_load_field_table), src/psaux/t1decode
(t1_decoder_parse_charstrings) <op_endchar>, src/truetype/ttgload.c
(load_truetype_glyph <subglyph loop>, tt_loader_init,
TT_Load_Glyph), src/truetype/ttgxvar.c (TT_Set_MM_Blend),
src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep): Do it.
We use a cast to indicate that we intentionally ignore a function's
return value. However, this doesn't apply to API functions where
errors can only happen for trivially invalid input.
* src/base/ftstroke.c (FT_Glyph_Stroke, FT_Glyph_StrokeBorder),
src/base/ftsynth.c (FT_GlyphSlot_Embolden), src/cff/cffgload.c
(cff_slot_load), src/pfr/pfrdrivr.c (pfr_get_kerning),
src/type1/t1load.c (parse_encoding), src/type42/t42parse.c
(t42_parse_encoding): Do it.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
This controls whether the old FreeType CFF engine gets compiled into
FreeType. It is now disabled by default.
* devel/ftoption.h, include/freetype/config/ftoption.h
(CFF_CONFIG_OPTION_OLD_ENGINE): New macro.
* src/cff/cffdrivr.c (cff_property_set), src/cff/cffgload.c
(CFF_Operator, cff_argument_counts, cff_builder_add_point,
cff_operator_seac, cff_decoder_parse_charstrings, cff_slot_load),
src/cff/cffgload.h, src/cff/cffobjs.c (cff_driver_init): Use
CFF_CONFIG_OPTION_OLD_ENGINE to guard the affected code.
* docs/CHANGES: Updated.
* src/base/ftcalc.c (FT_DivFix): Use unsigned values for
computations which use the left shift operator and convert to signed
as the last step.
* src/base/fttrigon.c (ft_trig_prenorm, FT_Vector_Rotate,
FT_Vector_Length, FT_Vector_Polarize): Ditto.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Simplify.
* src/cff/cffload.c (cff_subfont_load): Fix constant.
* src/cff/cffparse.c (cff_parse_integer, cff_parse_real, do_fixed,
cff_parse_fixed_dynamic): Use unsigned values for computations which
use the left shift operator and convert to signed as the last step.
* src/cid/cidload.c (cid_get_offset): Ditto.
* src/psaux/psconv.c (PS_Conv_ToFixed): Ditto.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings): Ditto.
* src/truetype/ttinterp.c (TT_MulFix14, TT_DotFix14): Ditto.
* include/freetype/internal/ftstream.h: Simplify and fix integer
extraction macros.
(FT_INT8_, FT_BYTE_I16, FT_BYTE_I32, FT_INT8_I16, FT_INT8_I32,
FT_INT8_I32, FT_INT8_U32): Removed.
(FT_PEEK_SHORT, FT_PEEK_LONG, FT_PEEK_OFF3, FT_PEEK_SHORT_LE,
FT_PEEK_LONG_LE, FT_PEEK_OFF3_LE): Use unsigned values for
computations and convert to signed as the last step.
* src/cff/cf2fixed.h (cf2_intToFixed, cf2_fixedToInt,
cf2_fracToFixed): Avoid shifts of negative values.
(cf2_intToFrac, cf2_fixedToFrac, cf2_fixedTo26Dot6): Removed,
unused.
* src/cff/cf2intrp.c (cf2_interpT2CharString) <cf2_cmdEXTENDEDNMBR,
default>: Use unsigned values for computations and convert to signed
as the last step.
Use proper types in tracing messages.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Use unsigned
values for computation of operands and convert to signed as the last
step.
Use proper type in tracing message.
This work, written by Dave Arnold <darnold@adobe.com> and fully
integrated into FreeType by me, is a donation by Adobe in
collaboration with Google. It is vastly superior to the old CFF
engine, and it will replace it soon. Right now, it is still off by
default, and you have to explicitly select it using the new
`hinting-engine' property of the cff driver.
For convenience, (most of) the new files are committed separately.
* include/freetype/config/ftheader.h (FT_CFF_DRIVER_H): New macro.
* include/freetype/ftcffdrv.h: New file to access CFF driver
properties.
* include/freetype/fterrdef.h (FT_Err_Glyph_Too_Big): New error
code.
* include/freetype/internal/fttrace.h: Add `cf2blues', `cf2hints',
and `cf2interp'.
* src/cff/cffgload.h (CFF_SubFont): New member `current_subfont'.
* src/cff/cffobjs.h (CFF_DriverRec): New members `hinting_engine'
and `no_stem_darkening'.
* src/cff/cfftypes.h (CFF_FontRec): New member `cf2_instance'.
* src/cff/cff.c: Include new files.
* src/cff/cffdrivr.c (cff_property_set, cff_property_get): Handle
`hinting-engine' and `no-stem-darkening' properties (only the Adobe
engine listens to them).
* src/cff/cffgload.c: Include `cf2ft.h'.
(cff_decoder_prepare): Initialize `current_subfont'.
(cff_build_add_point): Handle Adobe engine which uses 16.16
coordinates.
(cff_slot_load): Handle FT_LOAD_NO_SCALE and FT_LOAD_NO_HINTING
separately.
Choose rendering engine based on `hinting_engine' property.
* src/cff/cffload.c (cff_font_done): Call finalizer of the Adobe
engine.
* src/cff/cffobjs.c: Include FT_CFF_DRIVER_H.
(cff_driver_init): Set default property values.
* src/cff/rules.mk (CFF_DRV_SRC, CFF_DRV_H): Add new files.
* src/cff/cf2*.*: New files, containing the Adobe engine.
* src/cff/cffgload.c (check_points): Rename to...
(cff_check_points): ...this and make it FT_LOCAL.
(cff_builder_add_point, cff_builder_add_point1,
cff_builder_start_point, cff_builder_close_contour,
cff_lookup_glyph_by_stdcharcode, cff_get_glyph_data,
cff_free_glyph_data): Make them FT_LOCAL.
* src/cff/cffgload.h: Updated.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
Patch suggested by Miles.Lau <sunliang_liu@foxitsoftware.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings): Emit tracing
message for unknown operators and continue instead of exiting with a
syntax error.
We simply ignore such instructions. This is invalid, but it doesn't
harm; and indeed, there exist such subsetted fonts in PDFs.
Reported by Albert Astals Cid <aacid@kde.org>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
[cff_op_hlineto]: Ignore instruction if there aren't any arguments
on the stack.
Problem reported by Tobias Wolf <towolf@gmail.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: Sigh. I'm apparently too silly to fix this
correctly in less than three tries.
Problem reported by malc <av1474@comtv.ru>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: It is possible that there is just a single byte
after the `hintmask' or `cntrmask', e.g., a `return' instruction.
* src/cff/cffgload.c (cff_decoder_parse_charstrings)
<cff_op_hintmask>: Ensure that we don't exceed `limit' while parsing
the bit masks of the `hintmask' and `cntrmask' operators.
We do this by avoiding memory allocation and file I/O. This is
Savannah patch #7104.
* src/cff/cfftypes.h: Include PS cmaps service and
FT_INTERNAL_POSTSCRIPT_HINTS_H.
(CFF_SubFontRec): Remove `num_local_subrs'.
(CFF_FontRec): Add `num_strings', `strings', and `string_pool'
fields.
Remove `string_index' and `num_global_subrs' fields.
Use real types instead of `void' for `pshinter' and `psnames' fields.
* src/cff/cffload.c: Don't include PS cmaps service.
(cff_index_get_pointers): Add `pool' parameter which allows to
insert an extra NUL character for each String INDEX entry.
(cff_index_get_name): Make it a local function.
(cff_index_get_string): New function.
(cff_subfont_load): Updated.
(cff_font_load): Initialize `num_strings', `strings', and
`string_pool' fields in the `CFF_FontRec' structure.
(cff_index_get_sid_string): Use `cff_index_get_string' instead of
`cff_index_get_name'.
(cff_font_done): Updated.
* src/cff/cffload.h: Don't include PS cmaps service.
(cff_index_get_string): Added.
(cff_index_get_sid_string): Updated.
* src/cff/cffobjs.c: Don't include PS cmaps service and
FT_INTERNAL_POSTSCRIPT_HINTS_H.
(cff_size_get_globals_funcs, cff_slot_init): Updated.
(cff_face_init): Follow `cff_index_get_name',
`cff_index_get_string', and `cff_index_get_sid_string' changes.
* src/cff/cffcmap.c (cff_sid_free_glyph_name): Removed.
(cff_sid_to_glyph_name): Use `cff_index_get_cid_string'.
(cff_cmap_unicode_init): Updated.
* src/cff/cffdrivr.c: Don't include PS cmap service.
(cff_get_glyph_name): Avoid unnecessary lookup for POSTSCRIPT_CMAPS
service.
(cff_get_glyph_name, cff_ps_get_font_info, cff_get_ros): Follow API
`cff_index_get_sid_string' change.
(cff_get_name_index): Use `cff_index_get_string' instead of
`cff_index_get_name'.
* src/cff/cffgload.c: Don't include FT_INTERNAL_POSTSCRIPT_HINTS_H.
(cff_decoder_init, cff_decoder_prepare): Updated.
Since we consider `sbw' for the horizontal direction only, we still have
to synthesize vertical metrics if the user wants to use the vertical
writing direction.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph):
Synthesize vertical metrics (only) if FT_LOAD_VERTICAL_LAYOUT is
set.
After long discussion, we now consider the character width vector
(wx,wy) returned by the `sbw' Type 1 operator as being part of *one*
direction only. For example, if you are using the horizontal
writing direction, you get the horizontal and vertical components of
the advance width for this direction. Note that OpenType and CFF fonts
don't have such a vertical component; instead, the GPOS table can be
used to generate two-dimensional advance widths (but this isn't
handled by FreeType).
* include/freetype/ftincrem.h (FT_Incremental_MetricsRec): Add
`advance_v' field to hold the vertical component of the advance
value.
* src/truetype/ttgload.c (tt_get_metrics), src/cff/cffgload.c
(cff_slot_load), src/type1/t1gload.c
(T1_Parse_Glyph_And_Get_Char_String), src/cid/cidgload.c
(cid_load_glyph): Use it.
* src/cff/cffgload.c (CFF_Operator, cff_argument_counts): Handle
`seac', `sbw', and `setcurrentpoint' opcodes.
(cff_compute_bias): Add parameter to indicate the charstring type.
Update all callers.
(cff_operator_seac): Add parameter for side bearing.
(cff_decoder_parse_charstrings): Updated for more Type1 support.
* src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_get,
cff_op_put>: Appendix B of Adobe Technote #5177 limits the number of
elements for the `get' and `put' operators to 32.
* src/cff/cffgload.h (CFF_MAX_TRANS_ELEMENTS): Define.
(CFF_Decoder): Use it for `buildchar' and remove `len_buildchar'.
Problem and solution reported by Ning Dong <flintning@163.com>.
* src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_dup>:
Increase `args' by 2, not 1.
The calculation of `vertBearingX' is not defined in the OTF font
spec so FreeType does a `best effort' attempt. However, this value
is defined in the PDF and PostScript specs, and that algorithm is
better than the one FreeType currently uses:
FreeType: Use the middle of the bounding box as the X coordinate
of the vertical origin.
Adobe PDF spec: Use the middle of the horizontal advance vector as
the X coordinate of the vertical origin.
FreeType's algorithm goes wrong if you have a really small glyph
(like the full-width, circle-like dot at the end of the sentence, as
used in CJK scripts) with large bearings. With the FreeType
algorithm this dot gets centered on the baseline; with the PDF
algorithm it gets the correct location (in the top right). Note
that this is a serious issue, it's like printing the dot at the end
of a Roman sentence at the center of the textline instead of on the
baseline like it should. So i believe the PDF spec's algorithm
should be used in FreeType as well.
The `vertBearingY' value for such small glyphs is also very strange
if no `vmtx' information is present, since the height of the bbox is
not representable for the height of the glyph visually (the
whitespace up to the baseline is part of the glyph). The fix also
includes some code for a better estimate of `vertBearingY'.
* src/base/ftobjs.c (ft_synthesize_vertical_metrics): `vertBearingX'
is now calculated as described by the Adobe PDF Spec. Estimate for
`vertBearingY' now works better for small glyphs completely above or
below the baseline into account.
* src/cff/cffgload.c (cff_slot_load): `vertBearingX' is now
calculated as described by the Adobe PDF Spec. Vertical metrics
information was always ignored when FT_CONFIG_OPTION_OLD_INTERNALS
was not defined.
* src/truetype/ttgload.c (compute_glyph_metrics): `vertBearingX' is
now calculated as described by the Adobe PDF Spec.
Bug reported by Ivan Nincic <inincic@pdftron.com>.
* src/cff/cffgload.c (cff_slot_load): Thinko: Check `xx' element of
`font_matrix' also.
* docs/CHANGES: Updated.
include/freetype/config/ftconfig.h, builds/unix/ftconfig.in: Minor
beautifying.
* include/freetype/ftadvanc.h, include/freetype/ftgasp.h,
include/freetype/ftlcdfil.h: Protect against FreeType 1.
Some other minor fixes.
* devel/ftoption.h: Synchronize with
include/freetype/config/ftoption.h.
Formatting, documentation improvements.
include/freetype/config/ftheader.h, include/freetype/freetype.h,
src/base/Jamfile, src/base/rules.mk, src/cff/cffdrivr.c,
src/cff/cffgload.c, src/cff/cffgload.h, src/truetype/ttdriver.c,
src/truetype/ttgload.h, src/truetype/ttgload.c, src/type1/t1driver.c,
src/type1/t1gload.h, src/type1/t1gload.c:
Add a new header named FT_ADVANCES_H declaring some new APIs
to extract the advances of one or more glyphs without necessarily
loading their outlines. Also provide 'fast loaders' for the
TrueType, Type1 and CFF font drivers (more to come later)
* autogen.sh: add checks for minimum version of the 'autotools'
stuff.
assume that the first argument on the stack is the bottom-most
element. Two reasons:
o According to people from Adobe it is missing in the Type 2
specification that pushing of additional, superfluous arguments
on the stack is prohibited.
o Acroread in general handles fonts differently, namely by popping
the number of arguments needed for a particular operand (as a PS
interpreter would do). In case of buggy fonts this causes a
different interpretation which of the elements on the stack are
superfluous and which not.
Since there are CFF subfonts (embedded in PDFs) which rely on
Acroread's behaviour, FreeType now does the same.
* include/freetype/internal/ftcalc.h, src/base/ftcalc.c
(FT_Matrix_Multiply_Scaled, FT_Vector_Transform_Scaled): New
functions.
* src/cff/cffobjs.h (CFF_Internal): New struct. It is used to
provide global hinting data for both the top-font and all subfonts
(with proper scaling).
* src/cff/cffobjs.c (cff_make_private_dict): New function, using
code from `cff_size_init'.
(cff_size_init, cff_size_done, cff_size_select, cff_size_request):
Use CFF_Internal and handle subfonts.
(cff_face_init): Handle top-dict and subfont matrices correctly;
apply some heuristic in case of unlikely matrix concatenation
results. This has been discussed with people from Adobe (thanks
goes mainly to David Lemon) who confirm that the CFF specs are fuzzy
and not correct.
* src/cff/cffgload.h (cff_decoder_prepare): Add `size' argument.
* src/cff/cffgload.c (cff_builder_init): Updated.
(cff_decoder_prepare): Handle hints globals for subfonts.
Update all callers.
(cff_slot_load): Handling scaling of subfonts properly.
* src/cff/cffparse.c (cff_parse_fixed_dynamic): New function.
(cff_parse_font_matrix): Use it.
* src/cff/cfftypes.h (CFF_FontDictRec): Make `units_per_em'
FT_ULong.
* docs/CHANGES: Document it.
and `scale_y' as obsolete since they aren't used.
* src/psaux/psobjs.c (t1_builder_init): Updated.
* src/cff/cffgload.h (CFF_Builder): Mark `scale_x' and `scale_y' as
obsolete since they aren't used.
* src/cff/cffgload.c (cff_builder_init): Updated.
expanded). This is needed for options like
--includedir='${prefix}/include'.
* builds/unix/detect.mk, configure: Prevent argument expansion in
call to the (real) `configure' script.
* src/truetype/ttgload.c (load_truetype_glyph): Fix compilation if
TT_USE_BYTECODE_INTERPRETER isn't defined.
There exist CFFs which contain opcodes for the Type 1 operators
`hsbw' and `closepath' which are both invalid in Type 2 charstrings.
However, it doesn't harm to support them.
* src/cff/cffgload.c (CFF_Operator): Add `cff_op_hsbw' and
`cff_op_closepath.'
(cff_argument_counts): Ditto.
(cff_decoder_parse_charstrings): Handle Type 1 opcodes 9 (closepath)
and 13 (hsbw) which are invalid in Type 2 charstrings.
src/cff/cfftypes.h: formatting + do not load the CFF index
offsets into memory, since this wastes a *lot* of heap memory
with large Asian CFF fonts. There is no significant performance
loss
test for a valid glyph index must be deferred to the font drivers.
This patch fixes Savannah bug #18301.
* src/base/ftobjs.c (FT_Load_Glyph): Don't check `glyph_index'.
* src/bdf/bdfdrivr.c (BDF_Glyph_Load), src/cff/cffgload.c
(cff_slot_load), src/cid/cidgload.c (cid_slot_load_glyph),
src/pcf/pcfdrivr.c (PCF_Glyph_Load), src/pfr/pfrobjs.c
(pfr_slot_load), src/truetype/ttdriver.c (Load_Glyph),
src/type1/t1gload.c (T1_Load_Glyph), src/winfonts/winfnt.c
(FNT_Load_Glyph): Check validity of `glyph_index'.
* src/cff/cffload.c (cff_charset_load): Set `charset->max_cid'.
* src/cff/cffgload.c (cff_slot_load): Change type of third parameter
to `FT_UInt'.
Check range of `glyph_index'.
* src/cff/cffgload.h: Updated.
after the tables' tags; `hdmx' is TrueType-specific and thus the code
is moved to the truetype module; `get_metrics' is moved here from the
truetype module so that the code can be shared with the cff module.
This pass involves no real changes. That is, the code is moved
verbatim mostly. The only exception is the return value of
`tt_face_get_metrics'.
* include/freetype/internal/sfnt.h, src/sfnt/rules.mk,
src/sfnt/sfdriver.c, src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttload.h, src/sfnt/ttsbit.c,
src/sfnt/ttsbit.h, src/sfnt/ttsbit0.c: Clean up the SFNT_Interface.
* src/sfnt/ttmtx.c, src/sfnt/ttmtx.h: Metrics-related tables' loading
and parsing code is moved here.
Move `tt_face_get_metrics' here from the truetype module. The return
value is changed from `void' to `FT_Error'.
* include/freetype/internal/fttrace.h: New trace: ttmtx.
* src/truetype/ttpload.c, src/truetype/ttpload.h: `hdmx' loading and
parsing code is moved here.
New function `tt_face_load_prep' splitted from `tt_face_load_fpgm'.
`tt_face_load_fpgm' returns `FT_Err_Ok' if `fpgm' doesn't exist.
* src/cff/cffgload.c, src/cff/cffobjs.c: Update.
* src/truetype/ttgload.c, src/truetype/ttobjs.c: Update.
the warp hinter isn't active (it shouldn't, still experimental)
* Jamfile, include/freetype/config/ftmodule.h: removed "gxvalid"
and "otvalid" from the list of modules that are linked statically
to a given FreeType library. Functionality has been moved to the
"ftvalid" CVS module.
note also that current Make-based build system still compiles the
modules though...
* include/freetype/config/ftoption.h: added FT_STRICT_ALIASING,
which controls the definitions of the memory management functions
to avoid warnings with recent versions of GCC. this macro is
only here to be disabled, in case we detect problems with the
new scheme.
NOTE: disable macro to use the memory debugger. this will be fixed
later !!
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
of metrics instead of aborting. Patch suggested by Derek Noonburg.
* src/cff/cffgload.c (cff_slot_load), src/cid/cidgload.c
(cid_slot_load_glyph), src/type1/t1gload.c (T1_Load_Glyph): Scale
the glyph properly if no hinter is available.
* docs/CHANGES: Mention scaling bug.
patch from Mike Moening <MikeM@RetekSolutions.com>
* src/cff/cffgload.c (cff_face_get_vertical_metrics): New function.
(cff_slot_load): Use cff_face_get_vertical_metrics.
* docs/CHANGES: Updated.
- fixing apinames.c, adding support for Watcom and Borland compilers
- adding generation of exported symbols list to the build system, including the Unix one !!
sorry Werner, I have no time to document this in ChangeLog at the moment
Matthias Clasen