Since 2016-05-16 we detect infinite recursion directly.
* src/sfnt/ttload.c (tt_face_load_maxp): Don't adjust
`maxComponentDepth'.
* src/truetype/ttgload.c (load_truetype_glyph): Don't abort if
`maxComponentDepth' is not valid. Instead, simply adjust its value
and emit a tracing message.
To match the logic in FDEF. The value of the end is only used for
bound-checking in `Ins_JMPR', so it may not have been obvious that
it was not recorded. Tested (as part of Font Validator 2.0) all the
fonts on Fedora and did not see any change.
* src/truetype/ttinterp.c (Ins_IDEF): Updated.
GETDATA[], opcode 0x92
bytecode instruction. It always returns 17, and we have absolutely
no idea what it is good for...
* src/truetype/ttinterp.c (Pop_Push_Count, opcode_name): Updated.
(Ins_GETDATA): New function.
(TT_RunIns): Add it.
This commit implements undocumented (but confirmed) stuff from
Apple's old bytecode engine.
GETVARIATION[], opcode 0x91
This opcode pushes normalized variation coordinates for all axes
onto the stack (in 2.14 format). Coordinate of first axis gets
pushed first.
GETINFO[], selector bit 3
If GX variation support is enabled, bit 10 of the result is set
to 1.
* src/truetype/ttinterp.c: Include FT_MULTIPLE_MASTERS_H.
(opcode_name) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Updated.
(Ins_GETINFO) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Handle selector
bit 3, checking support for variation glyph hinting.
(Ins_GETVARIATION) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: New function
to implement opcode 0x91.
(TT_RunIns) [TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Handle opcode 0x91.
This finally fixes the rendering of the cyclist and the lizard in
the `Zycon' font.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints): `first' point
index is always cumulative.
(tt_handle_deltas): Rename to...
(tt_interpolate_deltas): ... This.
Add new parameter for output point array.
Update caller.
(TT_Vary_Apply_Glyph_Deltas): Add `points_out' array; it now holds
the intermediate results of `tt_interpolate_deltas' that are to be
added to `outline->points'.
The coordinates of the base font should be used for interpolation
purposes, NOT the current points (i.e., the result of accumulation
of previous deltas).
* src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): Initialize
`points_org' before looping over all tuples.
This commit covers the most important one.
* src/autofit/afmodule.c (af_property_set): Handle `warping',
`darkening-parameters', and `no-stem-darkening'.
* src/cff/cffdrivr.c (cff_property_set): Handle
`darkening-parameters', `hinting-engine', and `no-stem-darkening'.
* src/truetype/ttdriver.c (tt_property_set): Handle
`interpreter-version'.
This is a preparation for handling an `FREETYPE_PROPERTIES'
environment variable to control (some) driver properties.
No change in functionality.
* src/base/ftobjs.c (ft_property_do): Add `value_is_string'
parameter.
(ft_property_string_set): New function.
(FT_Property_Set, FT_Property_Get): Updated.
* include/freetype/internal/ftobjs.h: Updated.
* include/freetype/internal/services/svprop.h
(FT_Properties_SetFunc): Add `value_is_string' parameter.
* src/autofit/afmodule.c (af_property_set), src/cff/cffdrivr.c
(cff_property_set), src/truetype/ttdriver.c (tt_property_set):
Updated, emitting an error currently if `value_is_string' is set.
* src/truetype/ttinterp.c (Ins_SHPIX): Allow SHPIX to move points in
the twilight zone. Otherwise, treat SHPIX the same as DELTAP.
Unbreaks various fonts such as older versions of Rokkitt and DTL
Argo T Light that would glitch severly after calling ALIGNRP after a
blocked SHPIX.
This patch prepares data structures and the like.
See added comments in `ttinterp.h' for more information on this and
the following commits in the series.
* devel/ftoption.h, include/freetype/config/ftoption.h
(TT_CONFIG_OPTION_SUBPIXEL_HINTING): Assign values to differentiate
between subpixel versions.
(TT_SUPPORT_SUBPIXEL_HINTING_INFINALITY,
TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL): New macros.
* include/freetype/ftttdrv.h (TT_INTERPRETER_VERSION_40): New macro.
* include/freetype/internal/tttypes.h (TT_FaceRec): Updated.
* src/truetype/ttinterp.h (TT_ExecContextRec): Define new fields
`subpixel_hinting_lean', `vertical_lcd_lean',
`backwards_compatibility', `iupx_called', iupy_called', and
`grayscale_cleartype' for new hinting mode.
* src/truetype/ttdriver.c (tt_property_set): Handle v38 and v40
interpreters conditionally.
* src/truetype/ttgload.c (TT_Hint_Glyph): Save phantom points unless
in v38 backwards compatibility mode.
Updated.
(compute_glyph_metrics): Add v38 backwards compatibility mode
constraint for adjusting advance widths.
Updated.
(tt_loader_init): Handle new flags `subpixel_hinting_lean',
`grayscale_cleartype', and `vertical_lcd_lean'.
Updated.
(tt_get_metrics, TT_Process_Simple_Glyph, TT_LOADER_SET_PP):
Updated.
* src/truetype/ttobjs.c (tt_driver_init): Conditionally set
default interpreter version number.
* src/truetype/ttsubpix.c, src/truetype/ttsubpix.h: Updated.
The previous fix for #46372 misunderstood a composite glyph referring
same component twice as a recursive reference. See the discussion
http://lists.gnu.org/archive/html/freetype/2016-05/msg00000.html
Thanks to Khaled Hosny for finding this issue.
* src/truetype/ttgload.c (ft_list_get_node_at): A function to get
the i-th node from FT_List. (load_truetype_glyph): In the traversal
scan of the reference tree in the composite glyph, we clear the
nodes filled by previous sibling chain.
Otherwise some properties could be set to arbitrary values, which is
harmless, but querying could give wrong positive results.
* src/cff/cffdrivr.c (cff_property_set) [hinting-engine],
* src/truetype/ttdriver.c (tt_property_set) [interpreter-version]:
Only allow defined values.
We probably did not notice this as all fonts we tested had only
tuple_coords[i] be +1 or -1 for non-intermediate tuples.
* src/truetype/ttgxvar.c (ft_var_apply_tuple): Implement it.
* include/freetype/internal/tttypes.h (TT_LoaderRec): New field
`composites'.
* src/truetype/ttgload.c: Include FT_LIST_H.
(load_truetype_glyph): Add composite subglyph index to a list;
abort if index is already in list.
(tt_loader_init): Updated.
(tt_loader_done): New function.
(TT_Load_Glyph): Call `tt_loader_done'.
Use the `gvar' table size instead of the remaining bytes in the
stream.
* src/truetype/ttgxvar.h (GX_BlendRec): New field `gvar_size'.
* src/truetype/ttgxvar.c (ft_var_load_gvar): Set `gvar_size'.
(ft_var_readpackedpoints, ft_var_readpackeddeltas: New argument
`size'.
(tt_face_vary_cvt, TT_Vary_Apply_Glyph_Deltas): Updated.
These tests should mainly help avoid unnecessarily large memory
allocations in case of malformed fonts.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints,
ft_var_readpackeddeltas): Check number of points against stream
size.
(ft_var_load_avar): Check `pairCount' against table length.
(ft_var_load_gvar): Check `globalCoordCount' and `glyphCount'
against table length.
(tt_face_vary_cvt): Check `tupleCount' and `offsetToData'.
Fix trace.
(TT_Vary_Apply_Glyph_Deltas): Fix trace.
Free `sharedpoints' to avoid memory leak.
For functions querying a face, bits 16-30 of the face index can hold
the named instance index if we have a GX font. The indices start
with value 1; value 0 indicates font access without GX variation
data.
* include/freetype/freetype.h (FT_FaceRec): Update documentation.
* include/freetype/internal/sfnt.h: Ditto.
* src/sfnt/sfobjs.c (sfnt_init_face)
[TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Get number of named instances and
do argument checks.
(sfnt_load_face): Updated.
* src/truetype/ttobjs.c (tt_face_init)
[TT_CONFIG_OPTION_GX_VAR_SUPPORT]: Use named instance, overwriting
the style name.
* src/base/ftobjs.c (open_face_from_buffer,
open_face_PS_from_sfnt_stream): Updated.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Updated.
* src/cff/cffload.c (cff_font_load): Updated.
* src/cff/cffobjs.c (cff_face_init): Make function exit early for
pure CFF fonts if `font_index < 0'.
Updated.
* src/cid/cidobjs.c (cid_face_init): Updated.
* src/pcf/pcfdrivr.c (PCF_Face_Init): Updated.
* src/pfr/pfrobjs.c (pfr_face_init): Updated.
* src/type1/t1objs.c (T1_Face_Init): Updated.
* src/type42/t42objs.c (T42_Face_Init): Updated.
* src/winfonts/winfnt.c (fnt_face_get_dll_font, FNT_Face_Init):
Updated.
* docs/CHANGES: Updated.
* src/pfr/pfrgload.c (pfr_glyph_load_compound): Use multiplication,
not left-shift.
* src/truetype/ttgxvar.c (ft_var_load_avar, ft_var_load_gvar,
tt_face_vary_cvt, TT_Vary_Apply_Glyph_Deltas): Use multiplication,
not left-shift.
* src/base/ftrfork.c (FT_Raccess_Get_HeaderInfo): Only accept
positive values from header.
Check overflow.
* src/base/ftoutln.c (SCALED): Correctly handle left-shift of
negative values.
* src/bdf/bdf.h (_bdf_glyph_modified, _bdf_set_glyph_modified,
_bdf_clear_glyph_modified): Use unsigned long constant.
* src/bdf/bdfdrivr.c (BDF_Size_Select, BDF_Glyph_Load): Don't
left-shift values that can be negative.
* src/pcf/pcfdrivr.c (PCF_Size_Select, PCF_Glyph_Load): Don't
left-shift values that can be negative.
* src/raster/ftraster.c (SCALED): Correctly handle left-shift of
negative values.
* src/sfnt/ttsbit.c (tt_face_load_strike_metrics): Don't left-shift
values that can be negative.
* src/truetype/ttgload.c (TT_Load_Composite_Glyph,
compute_glyph_metrics, load_sbit_image): Don't left-shift values
that can be negative.
See
http://lists.nongnu.org/archive/html/freetype-devel/2015-07/msg00008.html
for a rationale.
* src/autofit/afpic.h, src/base/basepic.h, src/cff/cffpic.h,
src/pshinter/pshpic.h, src/psnames/pspic.h, src/raster/rastpic.h,
src/sfnt/sfntpic.h, src/smooth/ftspic.h, src/truetype/ttpic.h
(FT_BEGIN_HEADER, FT_END_HEADER): Move macro calls to not enclose
header files that contain FT_{BEGIN,END}_HEADER macros by
themselves.
* src/autofit/aftypes.h [FT_DEBUG_AUTOFIT]: Include
FT_CONFIG_STANDARD_LIBRARY_H earlier.
* src/truetype/ttpic.h: Include FT_INTERNL_PIC_H.
This is just very basic stuff and just a little bit tested on
GNU/Linux only. I won't delve into this since I'm not a Jam user.
* Jamfile: Call `HDRMACRO' for `ftserv.h' also.
(DEFINES): Replace with...
(CCFLAGS): ... this.
* src/Jamfile: Don't call `HDRMACRO' for `internal.h'; this is
already handled in the top-level Jamfile.
* src/autofit/Jamfile (DEFINES): Replace with...
(CCFLAGS): ... this.
(_sources): Add missing files.
* src/cache/Jamfile: Don't call `HDRMACRO' for `ftcache.h'; it no
longer contains macro header definitions.
* src/base/Jamfile, src/cff/Jamfile, src/sfnt/Jamfile,
src/truetype/Jamfile (_sources): Add missing files.
=======================
Tag sources with `VER-2-6'.
* docs/VERSION.DLL: Update documentation and bump version number to
2.6.
* README, Jamfile (RefDoc), builds/windows/vc2005/freetype.vcproj,
builds/windows/vc2005/index.html,
builds/windows/vc2008/freetype.vcproj,
builds/windows/vc2008/index.html,
builds/windows/vc2010/freetype.vcxproj,
builds/windows/vc2010/index.html,
builds/windows/visualc/freetype.dsp,
builds/windows/visualc/freetype.vcproj,
builds/windows/visualc/index.html,
builds/windows/visualce/freetype.dsp,
builds/windows/visualce/freetype.vcproj,
builds/windows/visualce/index.html,
builds/wince/vc2005-ce/freetype.vcproj,
builds/wince/vc2005-ce/index.html,
builds/wince/vc2008-ce/freetype.vcproj,
builds/wince/vc2008-ce/index.html: s/2.5.5/2.6/, s/255/26/.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 6.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.raw (version_info): Set to 18:0:12.
* CMakeLists.txt (VERSION_MINOR): Set to 0.
(VERSION_PATCH): Set to 6.
* src/autofit/afmodule.c [!FT_MAKE_OPTION_SINGLE_OBJECT]: Add
declarations for dumping functions.
* src/truetype/ttinterp.c (TT_New_Context): Pacify compiler.
* builds/toplevel.mk: Use `freetype.mk's code to compute the version
string.
Don't include a zero patch level in version string.
* builds/freetype.mk: Remove code for computing the version string.
Problem reported by Grissiom <chaos.proton@gmail.com>; in
http://lists.nongnu.org/archive/html/freetype/2015-05/msg00013.html
there is an example code to trigger the bug.
* src/truetype/ttobjs.c (tt_size_init_bytecode): Free old `size'
data before allocating again. Bug most probably introduced four
years ago in version 2.4.3.
* src/truetype/ttinterp.c: Change all existing TRACE7 calls to
TRACE6.
(opcode_name): Add string lengths.
(TT_RunIns): Implement display of code position and stack.
This is completely missing in Apple's documentation: If a `gvar'
tuple uses private point numbers (this is, deltas are specified for
some points only), the uncovered points must be interpolated for
this tuple similar to the IUP bytecode instruction. Examples that
need this functionality are glyphs `Oslash' and `Q' in Skia.ttf.
* src/truetype/ttgxvar.c (tt_delta_shift, tt_delta_interpolate,
tt_handle_deltas): New functions.
(TT_Vary_Get_Glyph_Deltas): Renamed to...
(TT_Vary_Apply_Glyph_Deltas): ... this; it directly processes the
points and does no longer return an array of deltas.
Add tracing information.
Call `tt_handle_deltas' to interpolate missing deltas.
Also fix a minor memory leak in case of error.
* src/truetype/ttgxvar.h: Updated.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph,
load_truetype_glyph): Updated.
* src/truetype/ttgload.c, src/truetype/ttinterp.c: Guard new code
with `TT_CONFIG_OPTION_SUBPIXEL_HINTING'.
Problem reported by Nikolaus Waxweiler <madigens@gmail.com>.
This flag activates `native ClearType hinting', disabling backwards
compatibility mode as described in Greg Hitchcocks whitepaper. In
other words, it enables unrestricted functionality of all TrueType
instructions in ClearType.
* src/truetype/ttgload.c (tt_get_metrics): Call `sph_set_tweaks'
unconditionally.
(tt_loader_init): Unset `ignore_x_mode' flag if bit 2 of
`GS.instruct_control' is active.
* src/truetype/ttinterp.c (Ins_INSTCTRL): Handle selector index 3.
(Ins_GETINFO): Updated.
* docs/CHANGES: Document it.
* src/truetype/ttgload.c (TT_Load_Composite_Glyph): If the
ARGS_ARE_XY_VALUES flag is not set, handle argument values as
unsigned. I trust `ttx' (which has exactly such code) that it does
the right thing here...
The reason that noone has ever noticed this bug is probably the fact
that point-aligned subglyphs are rare, as are subglyphs with a
number of points in the range [128;255], which is quite large (or
even in the range [32768;65535], which is extremely unlikely).
This commit allows `num_coords' to be larger or smaller than the
number of available axes while selecting a design instance, either
ignoring excess data or using defaults if data is missing.
* src/truetype/ttgxvar.c (TT_Set_MM_Blend, TT_Set_Var_Design):
Implement it.
* src/type1/t1load.c (T1_Set_MM_Blend, T1_Set_MM_Design,
T1_Set_Var_Design): Ditto.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints): Correctly handle
single-element runs. Cf. glyph `Q' in Skia.ttf with weights larger
than the default.
* src/truetype/ttgxvar.c (ft_var_readpackedpoints): Fix return value
of `point_cnt' if two bytes are read.
Use a more vertical coding style.
(ft_var_readpackeddeltas): Use FT_UInt for `delta_cnt' parameter.
Use a more vertical coding style.
This is hard-coded to value 2 in `fvar' version 1.0 (and no newer
version exists), but some fonts set it incorrectly.
Problem reported by Adam Twardoch <adam@fontlab.com>.
Alexei Podtelezhnikov