Suggested by Akira Tagoh, see
http://lists.gnu.org/archive/html/freetype/2013-09/msg00030.html
* src/bdf/bdfdrivr.c (BDF_Face_Init): Return Invalid_Argument error
when the font could be opened but non-zero face_index is given.
* src/pcf/pcfdrivr.c (PCF_Face_Init): Ditto.
* src/type42/t42objs.c (T42_Face_Init): Remove unrequired FT_UNUSED
macro for face_index because it is validated in later.
Previously, the loading of a glyph was traced at level 4, if at all.
With this change, all font loading routines emit a tracing message
at level 1, making it easier to select tracing output (for example
using F2_DEBUG="any:1 afhints:7 aflatin:7").
* src/bdf/bdfdrivr.c (BDF_Glyph_Load): Add tracing message.
* src/cff/cffdrivr.c (cff_glyph_load): Ditto.
* src/cff/cffgload.c (cff_decoder_prepare): Improve tracing
messages.
* src/cid/cidgload.c (cid_load_glyph): Use level 1 for tracing
message.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load): Ditto.
* src/pfr/pfrobjs.c (pfr_slot_load): Add tracing message.
* src/truetype/ttgload.c (TT_Load_Glyph): Ditto.
* src/type1/t1gload.c (T1_Load_Glyph): Ditto.
* src/type42/t42objs.c (T42_GlyphSlot_Load): Ditto.
* src/winfonts/winfnt.c (FNT_Load_Glyph): Ditto.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
(cff_face_done), src/pfr/pfrobjs.c (pfr_face_done),
src/pcf/pcfdrivr.c (PCF_Face_Done), src/cid/cidobjs.c
(cid_face_done), src/bdf/bdfdrivr. (BDF_Face_Done),
src/sfnt/sfobjs.c (sfnt_face_done): Protect against face == 0.
Reported by Graham Asher.
test for a valid glyph index must be deferred to the font drivers.
This patch fixes Savannah bug #18301.
* src/base/ftobjs.c (FT_Load_Glyph): Don't check `glyph_index'.
* src/bdf/bdfdrivr.c (BDF_Glyph_Load), src/cff/cffgload.c
(cff_slot_load), src/cid/cidgload.c (cid_slot_load_glyph),
src/pcf/pcfdrivr.c (PCF_Glyph_Load), src/pfr/pfrobjs.c
(pfr_slot_load), src/truetype/ttdriver.c (Load_Glyph),
src/type1/t1gload.c (T1_Load_Glyph), src/winfonts/winfnt.c
(FNT_Load_Glyph): Check validity of `glyph_index'.
the warp hinter isn't active (it shouldn't, still experimental)
* Jamfile, include/freetype/config/ftmodule.h: removed "gxvalid"
and "otvalid" from the list of modules that are linked statically
to a given FreeType library. Functionality has been moved to the
"ftvalid" CVS module.
note also that current Make-based build system still compiles the
modules though...
* include/freetype/config/ftoption.h: added FT_STRICT_ALIASING,
which controls the definitions of the memory management functions
to avoid warnings with recent versions of GCC. this macro is
only here to be disabled, in case we detect problems with the
new scheme.
NOTE: disable macro to use the memory debugger. this will be fixed
later !!
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
src/bdf/bdfdrivr.c, src/cff/cffgload.c, src/cid/cidgload.c,
src/pcf/pcfdrivr.c, src/type1/t1gload.c, src/winfonts/winfnt.c:
s/ft_fake_vertical_metrics/ft_synthesize_vertical_metrics/.
* docs/CHANGES: Mention that vertical metrics are synthesized for
fonts not having this info.
src/base/ftobjs.c (ft_fake_vertical_metrics): New function to fake the
vertical metrics.
* src/cff/cffgload.c, src/cid/cidgload.c, src/pcf/pcfdrivr.c,
src/type1/t1gload.c, src/winfonts/winfnt.c: Fake the vertical metrics.
The fake metrics is monotone.
* src/truetype/ttgload.c (compute_glyph_metrics): Some fixes and
formattings in vertical metrics faking. There are still rooms for
improvements (and so do the CFF module).
(PCF_Glyph_Load), src/winfonts/winfnt.c (FNT_Load_Glyph): Don't set
the linear advance fields as they are only for the outline glyphs.
* include/freetype/freetype.h: Documentation updates/clarificatoins.
The meaning of FT_LOAD_FORCE_AUTOHINT is changed so that no real
change need be made to the code.
* src/base/ftobjs.c (FT_Load_Glyph): Resolve flag dependencies and
decide whether to use the auto-hinter according to documentation.
There should to be no real difference.
Some checks (e.g., is text height positve?) after the glyph is loaded.
(FT_Select_Size, FT_Request_Size): Scales are set to wrong values.
Be careful that scales won't be negative.
* src/bdf/bdfdrivr.c (BDF_Size_Request, BDF_Size_Select),
src/pcf/pcfdrivr.c (PCF_Size_Request, PCF_Size_Select),
src/winfonts/winfnt.c (FNT_Size_Request, FNT_Size_Select): Do size
matching for request of type NOMINAL and REAL_DIM.
* src/winfonts/winfnt.c (FNT_Face_Init): Print trace message when
`pixel_height' is used for nominal height.
* src/base/ftobjs.c (FT_Request_Size): Call `FT_Match_Size' if the
face is bitmap only and driver doesn't provide `request_size'. This
is added merely for completion as no driver satisfies the conditions.
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
Blaskey).
* src/sfnt/ttcmap.h (TT_CMap): Add member `unsorted'.
* src/sfnt/ttcmac.c: Use SFNT_Err_Ok where appropriate.
(tt_cmap0_validate, tt_cmap2_validate, tt_cmap6_validate,
tt_cmap8_validate, tt_cmap10_validate, tt_cmap12_validate): Use
`FT_Error' as return type.
(tt_cmap4_validate): Use `FT_Error' as return type.
Return error code for unsorted cmap.
(tt_cmap4_char_index, tt_cmap4_char_next): Use old code for unsorted
cmaps.
(tt_face_build_cmaps): Set `unsorted' variable in cmap.
Minor formatting.
ppem values.
(PCF_Set_Point_Size): Don't call PCF_Set_Pixel_Size but provide own
code to compare ppem values.
* src/bdf/bdfdrivr.c (BDF_Set_Pixel_Size): Compare heights, not
ppem values.
(BDF_Set_Point_Size): Don't call BDF_Set_Pixel_Size but provide own
code to compare ppem values.
* src/bdf/bdflib.c (_bdf_add_property, _bdf_parse_start),
src/bdf/bdf.h (bdf_font_t): s/default_glyph/default_char/.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Fix number of glyphs.
Set `default_glyph'.
(BDF_Glyph_Load): Use `default_glyph' for undefined glyph.
* docs/CHANGES: Updated.
ftc_basic_family_init, ftc_basic_family_get_count,
ftc_basic_family_load_bitmap, ftc_basic_family_load_glyph,
ftc_basic_gnode_compare_faceid): Adjust parameters and return types
to prototypes given in header files from include/freetype/cache.
Use casts to proper types locally.
(ftc_basic_image_family_class, ftc_basic_image_cache_class,
ftc_basic_sbit_family_class, ftc_basic_sbit_cache_class): Remove
casts.
* src/cache/ftccback.h: Adjust parameters and return types to
prototypes given in header files from include/freetype/cache.
* src/cache/ftcimage.c (ftc_inode_free, ftc_inode_new,
ftc_inode_weight): Adjust parameters and return types to prototypes
given in header files from include/freetype/cache. Use casts to
proper types locally.
* src/cache/ftcsbits.c (ftc_snode_free, ftc_snode_new,
ftc_snode_weight, ftc_snode_compare): Adjust parameters and return
types to prototypes given in header files from
include/freetype/cache. Use casts to proper types locally.
* src/cache/ftccmap.c (ftc_cmap_node_free, ftc_cmap_node_new,
ftc_cmap_node_weight, ftc_cmap_node_compare,
ftc_cmap_node_remove_faceid): Adjust parameters and return types to
prototypes given in header files from include/freetype/cache. Use
casts to proper types locally.
(ftc_cmap_cache_class): Remove casts.
* src/cache/ftcglyph.c (ftc_gnode_compare, ftc_gcache_init,
ftc_gcache_done): Adjust parameters and return types to prototypes
given in header files from include/freetype/cache. Use casts to
proper types locally.
* src/cache/ftcmanag.c (ftc_size_node_done, ftc_size_node_compare,
ftc_size_node_init, ftc_size_node_reset,
ftc_size_node_compare_faceid, ftc_face_node_init,
ftc_face_node_done, ftc_face_node_compare: Adjust parameters and
return types to prototypes given in header files from
include/freetype/cache. Use casts to proper types locally.
(ftc_size_list_class, ftc_face_list_class): Remove casts.
* src/autohint/ahmodule.c (ft_autohinter_init, ft_autohinter_done):
Use FT_Module as parameter and do a cast to FT_AutoHinter locally.
(autohint_module_class): Remove casts.
* src/base/ftglyph.c (ft_bitmap_glyph_init, ft_bitmap_glyph_copy,
ft_bitmap_glyph_done, ft_bitmap_glyph_bbox, ft_outline_glyph_init,
ft_outline_glyph_done, ft_outline_glyph_copy,
ft_outline_glyph_transform, ft_outline_glyph_bbox,
ft_outline_glyph_prepare): Use FT_Glyph as parameter and do a cast
to FT_XXXGlyph locally.
Use FT_CALLBACK_DEF throughout.
(ft_bitmap_glyph_class, ft_outline_glyph_class): Remove casts.
* src/bdf/bdfdrivr.c (bdf_cmap_init, bdf_cmap_done,
bdf_cmap_char_index, bdf_cmap_char_next): Use FT_CMap as parameter
and do a cast to BDF_CMap locally.
(bdf_cmap_class): Remove casts.
* src/bdf/bdfdrivr.c (BDF_Face_Done, BDF_Face_Init,
BDF_Set_Pixel_Size): Don't use BDF_XXX but FT_XXX arguments which
are typecast to the proper BDF_XXX types within the function.
Update code accordingly.
Use FT_CALLBACK_DEF throughout.
(BDF_Set_Point_Size): New wrapper function.
(bdf_driver_class): Remove casts.
* src/cff/cffdrivr.c (Get_Kerning, Load_Glyph, cff_get_interface):
Don't use CFF_XXX but FT_XXX arguments which are typecast to the
proper CFF_XXX types within the function.
Update code accordingly.
Use FT_CALLBACK_DEF throughout.
(cff_driver_class): Remove casts.
* src/cff/cffobjs.h, src/cff/cffobjs.c (cff_size_done,
cff_size_init, cff_size_reset, cff_slot_done, cff_slot_init,
cff_face_init, cff_face_done, cff_driver_init, cff_driver_done):
Don't use CFF_XXX but FT_XXX arguments which are typecast to the
proper CFF_XXX types within the function.
Update code accordingly.
(cff_point_size_reset): New wrapper function.
* src/cid/cidobjs.h, src/cid/cidobjs.c (cid_slot_done,
cid_slot_init, cid_size_done, cid_size_init, cid_size_reset,
cid_face_done, cid_face_init, cid_driver_init, cid_driver_done):
Don't use CID_XXX but FT_XXX arguments which are typecast to the
proper CID_XXX types within the function.
Update code accordingly.
(cid_point_size_reset): New wrapper function.
* src/cid/cidgload.c, src/cid/cidgload.h (cid_slot_load_glyph):
Don't use CID_XXX but FT_XXX arguments which are typecast to the
proper CID_XXX types within the function.
Update code accordingly.
* src/cid/cidriver.c (cid_get_interface):
Don't use CID_XXX but FT_XXX arguments which are typecast to the
proper CID_XXX types within the function.
Update code accordingly.
Use FT_CALLBACK_DEF.
(t1cid_driver_class): Remove casts.
* src/truetype/ttdriver.c (tt_get_interface): Use FT_CALLBACK_DEF.
* src/truetype/ttgxvar.c (ft_var_load_avar): Don't free non-local
variables (this is done later).
(ft_var_load_avar): Fix call to FT_FRAME_ENTER.
(TT_Get_MM_Var): Fix size for `fvar_fields'.
(TT_Vary_Get_Glyph_Deltas): Handle deallocation of local variables
correctly.
* src/base/ftdbgmem.c (ft_mem_debug_realloc): Don't abort if
current size is zero.
src/ttdriver.c (Load_Glyph): Change type of `glyph_index' to
FT_UInt. From Lex Warners.
* src/sfnt/ttload.c (tt_face_load_sfnt_header): Really fix change
from 2004-03-19.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Use `ft_strlen'.
* src/pcf/pcfutil.c, src/pcf/pcfutil.h: Decorate functions with
`static.'.
Remove unused function `RepadBitmap'.
* src/pcf/pcfdrivr.c: Don't include pcfutil.h.
Sean McBride