Normally, the SCANMODE instruction (if present) to set the drop-out
mode in a TrueType font is located in the `prep' table only and thus
valid for all glyphs. However, there are fonts like `pala.ttf'
which additionally contain this instruction in the hinting code of
some glyphs (but not all). As a result it can happen that a
composite glyph needs multiple drop-out modes for its subglyphs
since the rendering state gets reset for each subglyph.
FreeType collects the hinted outlines from all subglyphs, then it
sends the data to the rasterizer. It also sends the drop-out mode
-- after hinting has been applied -- and here is the error: It sends
the drop-out mode of the last subglyph only; drop-out modes of all
other subglyphs are lost.
This patch fixes the problem; it adds a second, alternative
mechanism to pass the drop-out mode: For each contour, the
rasterizer now checks the first `tags' array element. If bit 2 is
set, bits 5-7 contain the contour's drop-out mode, overriding the
global drop-out mode.
* include/freetype/ftimage.h (FT_CURVE_TAG_HAS_SCANMODE): New macro.
* src/truetype/ttgload.c (TT_Hint_Glyph): Store drop-out mode in
`tags[0]'.
* src/raster/ftraster.c (Flow_Up, Overshoot_Top, Overshoot_Bottom):
Use bits 3-5 instead of 0-2.
(New_Profile): Set the drop-out mode in the profile's `flags' field.
(Decompose_Curve): Check `tags[0]' and set `dropOutControl' if
necessary.
(Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop, Draw_Sweep): Use the profile's drop-out
mode.
Pass dropout rules from the TT bytecode interpreter to the
rasterizer; temporarily this is enabled only if
`USE_SCAN_CONVERSION_RULES' is defined.
* include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS,
FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the
OpenType specification.
Fix mode 4 computation.
(Render_Glyph, Render_Gray_Glyph): Handle new outline flags.
* src/truetype/ttgload.c (TT_Load_Glyph)
[USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to
FT_OUTLINE_XXX flags.
* src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
boundary markers.
* src/tools/docmaker/content.py (re_field): Allow `.' in field names
(but not at the beginning or end).
* include/freetype/*: Many minor documentation improvements (adding
links, spelling errors, etc.).
* include/freetype/*: s/scale/scaling value/ where appropriate.
Many other minor documentation improvements.
* src/tools/docmaker/sources.py (re_italic, re_bold): Handle
trailing punctuation.
* src/tools/docmaker/tohtml.py (HtmlFormatter::make_html_word): Add
warning message for undefined cross references.
Update handling of re_italic and re_bold.
halved.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Change the default
strength.
Don't increase slot->advance.y.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 2.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.ac (version_info): Set to 9:9:3.
Currently, we are still binary compatible.
* builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj: s/219/2110/, s/2.1.9/2.1.10/.
* builds/freetype.mk (refdoc), README, Jamfile (RefDoc):
s/2.1.9/2.1.10/.
* docs/CHANGES, docs/VERSION.DLL: Updated.
* ChangeLog: Split off older entries into...
* ChangeLog.20, ChangeLog.21: These new files.
The next release will be 2.2.0, so don't worry about source code
backwards compatibility.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineToFunc, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc, FT_SpanFunc, FT_Raster_RenderFunc),
include/freetype/ftrender.h (FT_Glyph_TransformFunc,
FT_Renderer_RenderFunc, FT_Renderer_TransformFunc): Decorate
parameters with `const' where appropriate.
* src/sfnt/ttsbit.c (tt_face_load_sbit_image): Compute vertBearingY
to make glyphs centered vertically.
* src/truetype/ttgload.c (compute_glyph_metrics): Compute
vertBearingY to make glyphs centered vertically.
Fix some bugs in vertical metrics:
. loader->pp3.y and loader->pp4.y are in 26.6 format, not in font
units.
. As we use the glyph's cbox to calculate the top bearing now
there iss no need to adjust `top'.
* src/otvalid/otvcommn.h (OTV_OPTIONAL_TABLE): Use FT_UShort to be
in sync with OTV_OPTIONAL_OFFSET. Reported by YAMATO Masatake.
* docs/release: Update.
Exclude debug info for `Release' versions to reduce library size.
* src/base/ftobjs.c (FT_Open_Face): Make it work as documented, this
is, ignore `aface' completely if face_index < 0. Reported by David
Osborn <spam@habitualhiatus.com>.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineTo_Func, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc), src/smooth/ftgrays.c (gray_render_conic,
gray_render_cubic, gray_move_to, gray_line_to, gray_conic_to,
gray_cubic_to, gray_render_span, gray_sweep): Decorate parameters
with `const' where appropriate.
(unfinished) `otlayout' module but has been heavily modified to make
it much more compact.
* src/otvalid/*: New module.
* include/freetype/ftotval.h, src/base/ftotval.c,
include/freetype/internal/services/svotval.h: New files.
* include/freetype/config/ftmodule.h: Add otv_module_class.
* include/freetype/config/ftheader.h (FT_OPENTYPE_VALIDATE_H): New
macro.
* include/freetype/internal/ftserv.h
(FT_SERVICE_OPENTYPE_VALIDATE_H): New macro.
* include/freetype/internal/fttrace.h (otvmodule, otvcommon,
otvbase, otvgdef, otvgpos, otvgsub, otvjstf): New trace components.
* include/freetype/ftchapters.h: Updated.
* src/base/Jamfile (Library), src/base/descrip.mms (OBJS),
src/base/rules.mk (BASE_EXT_SRC): Updated.
* docs/CHANGES: Updated.
=========================
* builds/unix/ft2unix.h: Fix comments.
* builds/unix/ftconfig.in: Synchronized with ANSI version.
Use `#undef' in templates as recommended in the autoconf
documentation.
Since real `#undef' lines don't survive during configuration, use
`/undef' instead; the postprocessing facility of the
AC_CONFIG_HEADERS autoconf macro converts them to `#undef'.
* builds/unix/install.mk (install): Install Unix version of
`ftconfig.h'.
* builds/unix/unix-cc.in (CFLAGS): Set FT_CONFIG_CONFIG_H macro
to include the correct `ftconfig.h' file.
* builds/unix/ft-munmap.m4 (FT_MUNMAP_DECL): Removed.
(FT_MUNMAP_PARAM): Updated syntax to autoconf 2.59.
* builds/unix/freetype2.m4: Updated syntax to autoconf 2.59.
* builds/unix/configure.ac: Use AC_CONFIG_HEADERS instead of
AC_CONFIG_HEADER to create ftconfig.h, and use second argument
to replace `/undef' with `#undef'.
Don't use FT_MUNMAP_DECL but AC_CHECK_DECLS to check for munmap.
Use AS_HELP_STRING in AC_ARG_WITH.
Update syntax to autoconf 2.59.
* builds/unix/ltmain.sh: Regenerated with `libtoolize --force
--copy' from libtool 1.5.
* builds/unix/aclocal.m4: Regenerated with `aclocal -I .' from
automake 1.7.8.
* builds/unix/configure: Regenerated with autoconf 2.59.
* builds/unix/config.guess, builds/unix/config.sub: Updated from
`config' CVS module at subversions.gnu.org
* builds/unix/install-sh, builds/unix/mkinstalldirs: Updated from
`texinfo' CVS module at subversions.gnu.org.
* builds/vms/ftconfig.h: Synchronized with ANSI version.
* docs/CUSTOMIZE: Fix documentation error.
* docs/CHANGES, docs/VERSION.DLL, docs/release: Updated.
* builds/freetype.mk (refdoc): Updated --title.
include/freetype/freetype.h (FT_Bitmap_Size): `height' is now
defined to return the baseline-to-baseline distance. This was
already the value returned by the BDF and PCF drivers.
The `width' field now gives the average width. I wasn't able to
find something better. It should be taken as informative only.
New fields `size', `x_ppem', and `y_ppem'.
* src/pcf/pcfread.c (pcf_load_font): Updated to properly fill
FT_Bitmap_Size.
Do proper rounding and conversion from 72.27 to 72 points.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Updated to properly fill
FT_Bitmap_Size.
Do proper rounding and conversion from 72.27 to 72 points.
* src/sfnt/sfobjs.c (sfnt_load_face): Updated to properly fill
FT_Bitmap_Size.
* src/winfonts/winfnt.c (FNT_Face_Init): Updated to properly fill
FT_Bitmap_Size.
Redesigning the FNT driver to return multiple faces, not multiple
strikes. At least one font (app850.fon from WinME) contains
different FNT charmaps for its subfonts. Consequently, the previous
design of having multiple bitmap strikes in a single font face fails
since we have only one charmap per face.
* include/freetype/internal/fnttypes.h (FNT_Size_Rec): Removed.
(FNT_FaceRec): Remove `num_fonts' field and replace `fonts' with
`font'.
* src/base/ftwinfnt.c (FT_Get_WinFNT_Header): Updated.
* src/winfonts/winfnt.c (fnt_font_load): Don't set pixel_width equal
to pixel_height.
(fnt_face_done_fonts): Removed.
(fnt_face_get_dll_fonts): Renamed to...
(fnt_face_get_dll_font): This. Add second function argument to
select face index.
Updated to load just one subfont.
(fnt_font_done, FNT_Face_Done): Updated.
(FNT_Face_Init): Handle `face_index'.
Updated.
(FNT_Size_Set_Pixels): Simplified; similar to BDF and PCF, the
bitmap width is now ignored.
(FNT_Load_Glyph): Updated.
Fix glyph index computation.
(winfnt_driver_class): Updated.
#defines for the constants.
(FT_Open_Args): Change type of `flags' to FT_UInt.
(FT_GlyphSlot): Move `flags' to FT_Slot_Internal.
* include/freetype/ftimage.h (FT_Outline_Flags, FT_Raster_Flag):
Replaced with #defines for the constants.
* include/freetype/internal/ftobjs.h (FT_Slot_Internal): New
field `flags' (from FT_GlyphSlot).
Updated all affected source files.
(FT_GLYPH_OWN_BITMAP): New macro (from ftgloadr.h).
* include/freetype/internal/ftgloadr.h (FT_GLYPH_OWN_BITMAP): Moved
to ftobjs.h.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Use dummy
FT_GlyphSlot_Internal object.
include/freetype/ftstroker.h, include/freetype/ftsysio.h,
include/freetype/ftsysmem.h, include/freetype/ttnameid.h:
updating the in-source documentation
* src/tools/docmaker/tohtml.py: updating the HTML formatter in the
DocMaker tool
* src/tools/docmaker.py: removing obsolete file
debug mode of template instantiation
* src/cff/cffparse.c: fixed the CFF table loader. It didn't accept
empty arrays, and this prevented the loading of certain fonts.
* src/pshinter/pshalgo2.c, src/pshinter/pshalgo3.c: adding fix to
prevent seg fault when hints are provided in an empty glyph !!
* include/freetype/ftimage.h: removed incorrect "zft_" definitions
and updated constants documentation comments
* include/freetype/freetype.h (FT_FaceRec): updating documentation
comment. The "descender" value is always *negative*, not positive !
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
constants.
Add missing semicolons.
* builds/toplevel.mk: Do similar change as for
builds/unix/detect.mk.
* include/freetype/freetype.h (FT_ENC_TAG): New version to make it
easier to redefine.
* include/freetype/ftimage.h (FT_IMAGE_TAG): Ditto.
* include/freetype/freetype.h (FT_New_Memory_Face): Updated
`disable_horz_edges', `disable_vert_edges'.
* src/autohint/ahhint.c (ah_hint_edges_3, ah_hinter_hint_edges): Use
them (and remove static variables with the same names).
* src/pcf/pcfutil.c (BitOrderInvert): Add `const'.
* docs/glnames.py: Updated to latest pstables.h changes.
* src/psnames/pstables.h: Add more `const'.
* src/pcf/pcfutil.c: Ditto.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Fixing typo
(FT_Glyph_Done -> FT_Done_Glyph).
* include/freetype/ttnameid.h: Added some new Microsoft language
codes and LCIDs as found in Office Xp.
* builds/hurd/detect.mk: New file. Added support to detect the GNU
Hurd operating system as Unix-like. Fix submitted by Anthony Fok
<foka@debian.org>.
* src/type1/t1gload.c (T1_Load_Glyph): Set glyph control data to the
the Type 1 glyph charstring (used by conversion programs).
Submitted by Ha Shao <hashao@chinese.com>.
* src/base/ftgrays.c (grays_sweep): The function didn't exit
immediately if `num_cells' was 0 as it should. Thanks to Boris for
finding this out.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Fixed memory leak when
bitmap rendering fails (thanks to Graham Asher).
* docs/docmaker.py, include/freetype/*.h: Updated the DocMaker
script to support chapters and section block ordering. Updated the
public header files accordingly.
* src/base/ftglyph.c (FT_Glyph_Copy): Advance width and glyph format
were not correctly copied.
and empty lines in output.
* docs/docmaker.py: Improved script to generate table of contents
and index pages. It also supports wildcards on non Unix systems.
* include/freetype/*.h, include/freetype/cache/*.h: Updated comments
to include section definitions/delimitations for the API Reference
generator.
* include/freetype/freetype.h: Moved declaration of
`FT_Generic_Finalizer' and the `FT_Generic' structure to...
* include/freetype/fttypes.h: here.
`__' (those which haven't converted yet). Fixed minor conversion
issues.
* src/winfonts/winfnt.c: Updated to new header inclusion scheme.
* */*.[ch]: Changed source files to adhere to the new
* src/cff/cff.c, src/cff/rules.mk: Updated.
* */*.[ch]: Now using <ft2build.h> as the default build and setup
default..
- created "builds/devel" to hold developer builds options
for both Win32 and Unix
- fixed a bug in the winfonts driver, where the glyph image format
wasn't set correctly..
* builds/compiler/bcc-dev.mk, builds/compiler/visualage.mk,
builds/compiler/bcc.mk, builds/win32/w32-bcc.mk,
builds/win32/w32-bccd.mk: Revised.
* include/freetype/config/ftbuild.h,
include/freetype/internal/internal.h: Revised.
* include/freetype/ftimage.h: Updated to new header inclusion scheme.
* builds/toplevel.mk (.PHONY): Adding `distclean'.
* builds/unix/detect.mk (.PHONY): Adding `devel', `unix', `lcc',
`setup'.
* INSTALL: Slightly updated the quick starter documentation to
include IDE compilation, prevent against BSD Make, and specify "make
setup" instead of a single "make" for build configuration.
* include/config/ftbuild.h, include/internal/internal.h: Added new
configuration files used to determine the location of all public,
configuration, and internal header files for FreeType 2. Modified
all headers under "include/freetype" to reflect this change. Note
that we still need to change the library source files themselves
though.
builds/win32/detect.mk: Added new files to support compilation with
the free Borland C++ command-line compiler. Modified the detection
rules to recognize the new "bcc32" target in "make setup bcc32".
src/truetype/ttobjs.c, src/truetype/ttgload.c,
src/truetype/ttinterp.c: Fixed a few comparisons that Borland C++
didn't really like. Basically, this compiler complains when FT_UInt
is compared to FT_UShort (apparently, it promotes `UShort' to `Int'
in these cases).
C++ programs easier:
Renamed FT_WordXX to FT_UIntXX.
Changed a lot of void* to FT_Byte* if related to i/o streams -- FreeType
always accesses streams byte-wise, so this makes sense IMHO.
Added a lot of #ifdef __cplusplus to header files (and removed a few).
Other minor syntax fixes (mostly casts).
Replaced the variable `private' with `private_dict' -- `private' is
reserved in C++.
A lot of internal modifications have been performed lately on the
source in order to provide the following enhancements:
- more generic module support:
The FT_Module type is now defined to represent a handle to a given
module. The file <freetype/ftmodule.h> contains the FT_Module_Class
definition, as well as the module-loading public API
The FT_Driver type is still defined, and still represents a pointer
to a font driver. Note that FT_Add_Driver is replaced by FT_Add_Module,
FT_Get_Driver by FT_Get_Module, etc..
- support for generic glyph image types:
The FT_Renderer type is a pointer to a module used to perform various
operations on glyph image.
Each renderer is capable of handling images in a single format
(e.g. ft_glyph_format_outline). Its functions are used to:
- transform an glyph image
- render a glyph image into a bitmap
- return the control box (dimensions) of a given glyph image
The scan converters "ftraster.c" and "ftgrays.c" have been moved
to the new directory "src/renderer", and are used to provide two
default renderer modules.
One corresponds to the "standard" scan-converter, the other to the
"smooth" one.
The current renderer can be set through the new function
FT_Set_Renderer.
The old raster-related function FT_Set_Raster, FT_Get_Raster and
FT_Set_Raster_Mode have now disappeared, in favor of the new:
FT_Get_Renderer
FT_Set_Renderer
see the file <freetype/ftrender.h> for more details..
These changes were necessary to properly support different scalable
formats in the future, like bi-color glyphs, etc..
- glyph loader object:
A new internal object, called a 'glyph loader' has been introduced
in the base layer. It is used by all scalable format font drivers
to load glyphs and composites.
This object has been created to reduce the code size of each driver,
as each one of them basically re-implemented its functionality.
See <freetype/internal/ftobjs.h> and the FT_GlyphLoader type for
more information..
- FT_GlyphSlot had new fields:
In order to support extended features (see below), the FT_GlyphSlot
structure has a few new fields:
linearHoriAdvance: this field gives the linearly scaled (i.e.
scaled but unhinted) advance width for the glyph,
expressed as a 16.16 fixed pixel value. This
is useful to perform WYSIWYG text.
linearVertAdvance: this field gives the linearly scaled advance
height for the glyph (relevant in vertical glyph
layouts only). This is useful to perform
WYSIWYG text.
Note that the two above field replace the removed "metrics2" field
in the glyph slot.
advance: this field is a vector that gives the transformed
advance for the glyph. By default, it corresponds
to the advance width, unless FT_LOAD_VERTICAL_LAYOUT
was specified when calling FT_Load_Glyph or FT_Load_Char
bitmap_left: this field gives the distance in integer pixels from
the current pen position to the left-most pixel of
a glyph image WHEN IT IS A BITMAP. It is only valid
when the "format" field is set to
"ft_glyph_format_bitmap", for example, after calling
the new function FT_Render_Glyph.
bitmap_top: this field gives the distance in integer pixels from
the current pen position (located on the baseline) to
the top-most pixel of the glyph image WHEN IT IS A
BITMAP. Positive values correspond to upwards Y.
loader: this is a new private field for the glyph slot. Client
applications should not touch it..
- support for transforms and direct rendering in FT_Load_Glyph:
Most of the functionality found in <freetype/ftglyph.h> has been
moved to the core library. Hence, the following:
- a transform can be specified for a face through FT_Set_Transform.
this transform is applied by FT_Load_Glyph to scalable glyph images
(i.e. NOT TO BITMAPS) before the function returns, unless the
bit flag FT_LOAD_IGNORE_TRANSFORM was set in the load flags..
- once a glyph image has been loaded, it can be directly converted to
a bitmap by using the new FT_Render_Glyph function. Note that this
function takes the glyph image from the glyph slot, and converts
it to a bitmap whose properties are returned in "face.glyph.bitmap",
"face.glyph.bitmap_left" and "face.glyph.bitmap_top". The original
native image might be lost after the conversion.
- when using the new bit flag FT_LOAD_RENDER, the FT_Load_Glyph
and FT_Load_Char functions will call FT_Render_Glyph automatically
when needed.
Werner Lemberg