A new load flag, FT_LOAD_COLOR, makes FreeType load color
embedded-bitmaps, following this draft specification
https://color-emoji.googlecode.com/git/specification/v1.html
which defines two new SFNT tables, `CBDT' and `CBLC' (named and
modeled after `EBDT' and `EBLC', respectively). The color bitmaps
are stored in the new FT_PIXEL_MODE_BGRA format to represent BGRA
pre-multiplied sRGB images. If PNG support is available, PNG color
images as defined in the same proposed specification are supported
also.
Note that color bitmaps are converted to grayscale if client didn't
ask for color.
* builds/unix/configure.raw: Search for libpng.
Add `--without-png' option.
* devel/ftoption.h, include/freetype/config/ftoption.h
(FT_CONFIG_OPTION_USE_PNG): New macro.
* include/freetype/freetype.h (FT_LOAD_COLOR): New load flag.
* include/freetype/ftimage.h (FT_Pixel_Mode): Add
`FT_PIXEL_MODE_BGRA'.
* include/freetype/tttags.h (TTAG_CBDT, TTAG_CBLC): New tags.
* src/base/ftbitmap.c (FT_Bitmap_Embolden): Updated.
(ft_gray_for_premultiplied_srgb_bgra): New function.
(FT_Bitmap_Convert): Handle FT_PIXEL_MODE_BGRA.
* src/sfnt/pngshim.c, src/sfnt/pngshim.h: New files.
* src/sfnt/sfnt.c: Include `pngshim.c'.
* src/sfnt/ttsbit.c: Include FT_BITMAP_H and `pngshim.h'
(tt_face_load_eblc): Load `CBLC'.
(tt_sbit_decoder_init): Load `CBDT'.
(tt_sbit_decoder_alloc_bitmap): Pass load flags to select between
color and grayscale bitmaps.
Set `num_grays'. This is used by `ftview' to choose the blending
algorithm.
(tt_sbit_decoder_load_byte_aligned,
tt_sbit_decoder_load_bit_aligned, tt_sbit_decoder_load_compound,
tt_sbit_decoder_load_image): Pass load flag.
s/write/pwrite/.
Don't call `tt_sbit_decoder_alloc_bitmap'.
Updated.
(tt_sbit_decoder_load_png) [FT_CONFIG_OPTION_USE_PNG]: New function.
(tt_sbit_decoder_load_bitmap): Pass load flag.
Handle new glyph formats 17, 18, and 19.
Call `tt_sbit_decoder_alloc_bitmap'.
Flatten color bitmaps if necessary.
(tt_face_load_sbit_image): Updated.
* src/sfnt/rules.mk (SFNT_DRV_SRC): Add `pngshim.c'.
* docs/CHANGES: Updated.
This is essentially a mechanical conversion, adding inclusion of
`FT_INTERNAL_DEBUG_H' where necessary, and providing the macros for
stand-alone compiling modes of the rasterizer modules.
To convert the remaining occurrences of FT_Err_XXX and friends it is
necessary to rewrite the code. Note, however, that it doesn't harm
if some cases are not handled since FT_THROW is a no-op.
The main cycle in `blit_sbit' makes too many iterations: it actually
needs the count of lines in the source bitmap rather than in the
target image.
* src/sfnt/ttsbit.c (blit_sbit) [FT_CONFIG_OPTION_OLD_INTERNALS]:
Add parameter `source_height' and use it for main loop.
(Load_SBit_Single) [FT_CONFIG_OPTION_OLD_INTERNALS]: Updated.
src/sfnt/ttsbit.h, src/sfnt/ttsbit.c: moving the definition
of 'set_sbit_strike' and 'load_sbit_metrics' to their 2.1.8
location. This is used to support binary compatibility with
the X.Org server's libXfont library.
note that this disables memory optimizations for the embedded
bitmap loader.Sigh....
unused `max_points' and `max_contours'.
* src/cid/cidobjs.c (cid_face_init), src/type1/t1objs.c
(T1_Face_Init), src/type42/t42objs.c (T42_Face_Init): Update.
* include/freetype/internal/tttypes.h (TT_FaceRec): Remove unused
`max_components'.
* src/truetype/ttinterp.h (TT_ExecContextRec): Remove unused
`loadSize' and `loadStack'.
* src/truetype/ttinterp.c (TT_Done_Context, TT_Load_Context),
src/sfnt/ttload.c (tt_face_load_maxp): Update.
* src/cff/cffobjs.h (cff_size_select), src/sfnt/sfdriver.c
(sfnt_interface), src/truetype/ttdriver.c (tt_size_request): Fix
compiler errors/warnings when TT_CONFIG_OPTION_EMBEDDED_BITMAPS is not
defined.
* src/sfnt/ttmtx.c (tt_face_load_hmtx, tt_face_get_metrics): Fix
possible segment faults for the non-FT_OPTIMIZE_MEMORY'ed versions.
(finally!)
For most OpenType tables, `tt_face_load_xxxx' simply loads the table
and `face->root' is set later in `sfnt_load_face'. Here, we try to
make this work for _all_ tables.
* src/sfnt/ttsbit.c, src/sfnt/ttsbit0.c, src/sfnt/ttload.c,
src/sfnt/ttmtx.c: all `tt_face_load_xxxx' should load the table and
then exit. Error handling or setting face->root is done later in
`sfnt_load_face'.
Pretty trace messages.
* src/sfnt/sfobjs.c (sfnt_load_face): Work harder.
Mac bitmap-only fonts are not scalable.
Check that `face->header.Units_Per_EM' is not zero.
(LOAD_, LOADM_): Pretty trace messages.
* src/sfnt/ttsbit0.c (tt_face_load_strike_metrics): Read metrics from
`eblc'.
* src/sfnt/ttcmap.c (tt_face_build_cmaps), src/sfnt/ttpost.c
(load_format_20, load_format_25, tt_face_get_ps_name): Use
face->max_profile.numGlyphs, instead of face->root.num_glyphs.
after the tables' tags; `hdmx' is TrueType-specific and thus the code
is moved to the truetype module; `get_metrics' is moved here from the
truetype module so that the code can be shared with the cff module.
This pass involves no real changes. That is, the code is moved
verbatim mostly. The only exception is the return value of
`tt_face_get_metrics'.
* include/freetype/internal/sfnt.h, src/sfnt/rules.mk,
src/sfnt/sfdriver.c, src/sfnt/sfnt.c, src/sfnt/sfobjs.c,
src/sfnt/ttload.c, src/sfnt/ttload.h, src/sfnt/ttsbit.c,
src/sfnt/ttsbit.h, src/sfnt/ttsbit0.c: Clean up the SFNT_Interface.
* src/sfnt/ttmtx.c, src/sfnt/ttmtx.h: Metrics-related tables' loading
and parsing code is moved here.
Move `tt_face_get_metrics' here from the truetype module. The return
value is changed from `void' to `FT_Error'.
* include/freetype/internal/fttrace.h: New trace: ttmtx.
* src/truetype/ttpload.c, src/truetype/ttpload.h: `hdmx' loading and
parsing code is moved here.
New function `tt_face_load_prep' splitted from `tt_face_load_fpgm'.
`tt_face_load_fpgm' returns `FT_Err_Ok' if `fpgm' doesn't exist.
* src/cff/cffgload.c, src/cff/cffobjs.c: Update.
* src/truetype/ttgload.c, src/truetype/ttobjs.c: Update.
argument from `idx' to `strike_index'.
(FT_Size_Request_Type): Add FT_SIZE_REQUEST_TYPE_MAX to the end of
this enum.
* include/freetype/internal/ftobjs.h (FT_REQUEST_WIDTH,
FT_REQUEST_HEIGHT): New macros to get the width and height of a
request, in fractional pixels.
* include/freetype/internal/ftobjs.h (FT_Select_Metrics,
FT_Request_Metrics), src/base/ftobjs.c (FT_Select_Metrics,
FT_Request_Metrics): New base functions to set the font metrics. They
were part of FT_Select_Size/FT_Request_Size and are made independent
functions so that metrics are not set again and again.
* src/base/ftobjs.c (FT_Select_Size, FT_Request_Size): Metrics are set
only when driver's size_select/size_request is NULL. That is, drivers
should set the metrics themselves.
(FT_Match_Size): Round before matching. This was what we did and it
does cause some problems without rounding.
* src/cff/cffobjs.c (cff_size_select), src/truetype/ttdriver.c
(tt_size_select): Set the font metrics.
s/index/strike_index/.
The scaled metrics are always preferred over strikes' metrics, even
when some strike is selected. This is done because the strikes'
metrics are not reliable, e.g., the sign of the descender is wrong for
some fonts.
* src/cff/cffobjs.c (cff_size_request), src/truetype/ttdriver.c
(tt_size_request): Set the font metrics.
Call cff_size_select/tt_size_select when some strike is matched.
* src/bdf/bdfdrivr.c, src/cff/cffobjs.c, src/cid/cidobjs.c,
src/pcf/pcfdrivr.c, src/truetype/ttdriver.c, src/type1/t1objs.c,
src/type1/t1objs.h, src/type42/t42objs.c, src/winfonts/winfnt.c:
Set the font metrics.
s/index/strike_index/.
* src/tools/test_afm.c, src/psaux/psconv.c: Older versions of these
files were committed. Just a catch-up.
(PS_Conv_ToFixed): Remove the `goto'.
(PS_Conv_ASCIIHexDecode, PS_Conv_EexecDecode): Speed up a little.
* src/sfnt/ttsbit.c (tt_face_load_sbit_strikes,
tt_face_load_strike_metrics), src/sfnt/ttsbit0.c
(tt_face_load_sbit_strikes, tt_face_load_strike_metrics): The
advertised metrics in `available_sizes' are different from those
actually used.
`load_strike_metrics' used to load the strike's metrics.
* src/sfnt/sfdriver.c, src/sfnt/ttsbit.c, src/sfnt/ttsbit.h,
src/sfnt/ttsbit0.c: New function `tt_face_load_strike_metrics'.
* src/pfr/pfrobjs.c (pfr_face_init): Set FT_Bitmap_Size correctly.
* src/winfonts/winfnt.c (FNT_Face_Init): Use `nominal_point_size' for
nominal size unless it is obviously incorrect.
* include/freetype/freetype.h (FT_Bitmap_Size): Update the comments on
FNT driver.
Introduce new size selection interface.
* include/freetype/internal/ftdriver.h (struct FT_Driver_ClassRec_):
Replace `set_char_sizes' and `set_pixel_sizes' by `request_size' and
`select_size'.
* include/freetype/freetype.h (FT_Select_Size, FT_Size_Request_Type,
FT_Size_Request, FT_Request_Size, FT_Select_Size), src/base/ftobjs.c
(FT_Select_Size, FT_Request_Size): API additions to export the new
size selection interface.
* src/base/ftobjs.c (FT_Set_Char_Size, FT_Set_Pixel_Sizes): Use
`FT_Request_Size'.
* include/freetype/internal/ftobjs.h (FT_Match_Size),
src/base/ftobjs.c (FT_Match_Size): New function to match a size
request against `available_sizes'. Drivers supporting bitmap strikes
can use this function to implement `request_size'.
* src/bdf/bdfdrivr.c, src/cid/cidobjs.c, src/cid/cidobjs.h,
src/cid/cidriver.c, src/pcf/pcfdrivr.c, src/type1/t1driver.c,
src/type1/t1objs.c, src/type1/t1objs.h, src/type42/t42drivr.c,
src/type42/t42objs.c, src/type42/t42objs.h, src/winfonts/winfnt.c:
Update to new size selection interface.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/truetype/ttdriver.c, src/truetype/ttgload.c,
src/truetype/ttobjs.c, src/truetype/ttobjs.h: Update to new size
selection interface.
Make `strike_index' FT_ULong and always defined.
Use `load_strike_metrics' provided by SFNT interface.
halved.
* src/base/ftsynth.c (FT_GlyphSlot_Embolden): Change the default
strength.
Don't increase slot->advance.y.
* include/freetype/freetype.h (FREETYPE_MINOR): Set to 2.
(FREETYPE_PATCH): Set to 0.
* builds/unix/configure.ac (version_info): Set to 9:9:3.
Currently, we are still binary compatible.
* builds/win32/visualc/index.html,
builds/win32/visualc/freetype.dsp,
builds/win32/visualc/freetype.vcproj: s/219/2110/, s/2.1.9/2.1.10/.
* builds/freetype.mk (refdoc), README, Jamfile (RefDoc):
s/2.1.9/2.1.10/.
* docs/CHANGES, docs/VERSION.DLL: Updated.
* ChangeLog: Split off older entries into...
* ChangeLog.20, ChangeLog.21: These new files.
The next release will be 2.2.0, so don't worry about source code
backwards compatibility.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineToFunc, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc, FT_SpanFunc, FT_Raster_RenderFunc),
include/freetype/ftrender.h (FT_Glyph_TransformFunc,
FT_Renderer_RenderFunc, FT_Renderer_TransformFunc): Decorate
parameters with `const' where appropriate.
* src/sfnt/ttsbit.c (tt_face_load_sbit_image): Compute vertBearingY
to make glyphs centered vertically.
* src/truetype/ttgload.c (compute_glyph_metrics): Compute
vertBearingY to make glyphs centered vertically.
Fix some bugs in vertical metrics:
. loader->pp3.y and loader->pp4.y are in 26.6 format, not in font
units.
. As we use the glyph's cbox to calculate the top bearing now
there iss no need to adjust `top'.
* src/otvalid/otvcommn.h (OTV_OPTIONAL_TABLE): Use FT_UShort to be
in sync with OTV_OPTIONAL_OFFSET. Reported by YAMATO Masatake.
* docs/release: Update.
according to decreasing maximum cumulative allocations.
* include/freetype/internal/tttypes.h, src/sfnt/ttsbit.c, src/sfnt/ttsbit0.c,
src/truetype/ttobjs.c, src/cff/cffobjs.c, src/sfnt/sfobjs.c: implementing new
heap-optimized embedded bitmap loader. This one also fixes bug #12107
* src/sfnt/sfobjs.c: fixed bug that prevented loading SFNT fonts without
a 'kern' table.
drastically reduce the heap usage of FreeType, especially in the case
of memory-mapped files. The idea is to avoid loading and decoding tables
in the heap, and instead access the raw data whenever possible (i.e.
when it doesn't compromise performance).
This had several impacts: first, opening vera.ttf uses a ridiculous amount
of memory (when the FT_Library footprint is accounted for), until you start
loading glyphs. Even then, you'll save at least 20 Kb compared to the non
optimized case. performance of various operations, including open/close
has also been dramatically improved.
More optimisations to come. The auto-hinter eats memory like crazy? This
must be stopped...
overflow.
* src/sfnt/ttload.c (tt_face_load_hdmx): Protect against bad input.
Don't use FT_QNEW_ARRAY but FT_NEW_ARRAY to make deallocation work
in case of failure.
* src/sfnt/ttsbit.c (Load_SBit_Range): Check range intervals.
(tt_face_load_sbit_strikes): Allocate `strike_sbit_ranges' after
frame test.
* src/truetype/ttgload.c (TTLoad_Simple_Glyph): Add assertion for
`flag'.
FTC_FaceID.
* src/cff/cffdrivr.c (cff_get_cmap_info): Call sfnt module's TT CMap
Info service function if the cmap comes from sfnt. Return 0 if the
cmap is sythesized in cff module.
Formatting; updating copyright.
* include/freetype/internal/ftobjs.h, src/base/ftobjs.c, src/bdf/bdfdrivr.c,
src/pcf/pcfdriver.c, src/pfr/pfrsbit.c, src/sfnt/ttsbit.c,
src/type42/t42objs.c, src/winfonts/winfnt.c: introduced three new functions
to deal with glyph bitmaps within FT_GlyphSlot objects. these are:
ft_glyphslot_free_bitmap
ft_glyphslot_alloc_bitmap
ft_glyphslot_set_bitmap
these are much more convenient to use than managing the FT_GLYPH_OWN_BITMAP
flag manually. the font drivers have been modified to use them as well.
* src/cache/ftlru.c: fixed an invalid assertion check
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
changed the names of memory macros. Examples:
MEM_Set => FT_MEM_SET
MEM_Copy => FT_MEM_COPY
MEM_Move => FT_MEM_MOVE
ALLOC => FT_ALLOC
FREE => FT_FREE
REALLOC = >FT_REALLOC
FT_NEW was introduced to allocate a new object from a _typed_
pointer..
note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced
by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer
arguments.
This results in _lots_ of sources being changed, but makes the
code more generic and less error-prone..
Werner Lemberg